The smell of sewage in the toilet: an overview of the possible causes and ways to eliminate it

Causes of an unpleasant odor

Unpleasant smell in the toilet can be due to various reasons. Among them, several main ones can be distinguished.

Violations in the care of plumbing

With improper or irregular maintenance of plumbing, an unpleasant smell from the toilet bowl may be present in the toilet.

This is the most common cause of a repulsive odor. Quality care should include the use of disinfectants, cleaning and washing the toilet itself.

With this treatment, pollution, bacteria, microbes, as well as an unpleasant odor in the room are eliminated. Solution to the problem: proper timely care of the toilet.

blockage

Sewer clogging can occur when leftover food is poured into the toilet, and even garbage is flushed.

Rags, personal care products, bags and other items must not be thrown into the toilet.

Accumulating in the pipe, such garbage becomes a good breeding ground for pathogenic microorganisms, bacteria and fungus. As a result, the patency of the pipes is disturbed and an unpleasant odor is released.

The solution to the problem is cleaning the pipes and further keeping the plumbing clean.

Mounting errors, leaks, wear

Over time, cracks can form on sewer pipes, and the joints of parts can lose their tightness.Sometimes such situations arise even with new equipment if it is mounted incorrectly or low quality parts are used.

Problem solving - troubleshooting, if necessary - replacing elements or the entire system.

Ventilation problems

An improperly organized ventilation system can also lead to stagnant stench. Or its blockage, which disrupts normal air exchange. Problem solving - troubleshooting the system.

How to get rid of leaks

Often, hidden leaks do not lead to a flood, but simply cause an unpleasant odor. Finding a place is not easy, because it can also be hidden in the interfloor ceiling. When searching for a leak, it is necessary to carefully consider all pipelines and their connections. Visual detection can be facilitated by using a brush and soapy water. A solution is applied to the joints, and then water is started. Then the pressure is measured in the pipelines and soap bubbles are formed in the places of hidden leaks.

How to get rid of the sewer smell in the toilet in this case? After a leak is detected, this place must be filled with sealant. If a fistula is found on a cast-iron pipe, the slots and holes are sealed using “cold welding”.

Video: how to eliminate the smell in the toilet

Some useful tips on how to get rid of the unpleasant toilet "aroma".

It must be understood that if an unpleasant sewer smell appeared in the bathroom once, it will soon appear again. Therefore, this problem cannot be left to chance, but must be solved. Timely troubleshooting will save you time and money.

Unfortunately, the fact that the feces when flushing, we go to the bathroom, is true, and not my fiction.The text is literate and useful, I was hoping to get the same answer, what should I do. And the fact that you don’t have such a thing in your house, you are very lucky, and we have been suffering for many years already, they called on our heads to change the pipes

Thank you for your attention, there is no need to answer, I already realized that no one will help us solve our problem, I'm not going to argue, I'm not interested. I just wanted to say that such nightmares are true

Free consultations of a technological network engineer Ask your question

Join the social networks

• Climate company
• Company "Vip Sphere"

Add company

Popular from this category

• Cable for sewer cleaning: types of tools and how to use them correctly
• Hydraulic seal for sewerage: types, principle of operation and installation rules
• Non-return valve for sewerage: installation guide for a shut-off device
• Do-it-yourself sewerage in an apartment: installation steps and internal wiring rules

Visitors are now discussing

Check valve for a pumping station: why needed and how to install Other

Thermostat in socket for household heaters: how it works and how to install Sockets and switches

Stove do-it-yourself potbelly stove: a diagram of a home-made potbelly stove for a summer residence and a garage Heating equipment

Toilet odor removers

Before finding out the cause of the sewer smell in the bathroom and repairing the breakdown, it is recommended to use special household products that will temporarily eliminate the unpleasant odor:

• Refreshing air automatic aroma dispenser or aerosol.
• Sticker strips or blocks that are attached to the toilet.
• Flavored tablets for the toilet cistern.

For a country house and a summer residence, special products are used to care for country toilet bowls and cesspools.

The preparations contain bacteria that help to quickly process all the contents of the toilet, eliminating the unpleasant smell of the sewer. The most commonly used brands are: Saneks, Bioforce Septic, Septic Shock.

No. 1 - microspray and aroma dispenser

Both tools are attached to the wall of the bathroom. Their difference is that the microspray gives out the aroma after pressing it, and the aroma dispenser releases it automatically during the day. In this case, the aroma is served after a certain period of time and in a dosed amount. Popular brands include Glade, Airwick.

The automatic aroma dispenser is a universal tool that can eliminate unpleasant odors of any origin, but only for a while

An alternative option is a helium air freshener. It can be attached to the wall of the bathroom or placed on a shelf. It deodorizes the room with pleasant aromas for 60 days.

All of the above remedies superficially and temporarily solve the problem of an unpleasant sewer smell in the toilet, but they are not able to kill germs, remove pollution and eliminate the cause of the stench.

No. 2 - flavored tablets for the tank

An effective remedy to get rid of sewer odor is flavored tablets. They sink into the toilet bowl.

After each descent of water, the tablet refreshes the bathroom with a pleasant aroma, effectively disinfects it and prevents the appearance of urinary stone and rust on the walls of the toilet bowl.

The advantages of flavored tablets over alternative means are the possibility of reusable use, the performance of several functions at the same time and an acceptable price.

Flavored tablets used in the toilet cistern can turn the water green or blue.

In the modern market of household chemicals, high-quality products of trademarks are especially popular: Svezhinka, Rio, Snowter, Bloo, Liaara.

No. 3 - sticker strips and blocks

To eliminate odors in the toilet, blocks and sticker strips that are glued to the toilet are often used. They deodorize the air and have antiseptic properties, helping to fight harmful bacteria. In contact with water, they provide a pleasant freshness in the room.

The most popular sticker strips are Domestos and Toilet duck. They are designed for long-term action - approximately 450 contacts with water.

Hanging blocks with a refreshing gel are effective in combating unpleasant odors. They perform several functions at once: deodorize the air, wash and disinfect the toilet. The blocks are easy to refill and have a capacity of 100 washes. The most popular: Domestos, Bref, Toilet duck.

How to eliminate sewer odor

To get rid of this problem, identify and eliminate the cause of its occurrence.

Repair of engineering networks

Cleaning the sewer pipe with a cable.

1. Refurbishment of the pipeline. New elements are laid, creating a slope prescribed by sanitary standards. Unreliable connections are treated with sealant, new seals are installed.
2. Elimination of blockage of the general sewer riser.In apartment buildings, this problem is solved by utilities.
3. Elimination of pipe damage. The hole in the metal pipe is closed with a cement mixture. The joints between the plastic elements are covered with sealant.
4. Replacement of old cuffs. Before installing a new part, the socket is freed from contamination and traces of corrosion. The cuff is coated with silicone sealant.
5. Processing the joint of the toilet pipe with a cast-iron sewer pipe. To do this, the corrugation is disconnected, cleaned and degreased. After reconnecting the part, the joint is treated with a sealant.
6. Siphon inspection. When placing a plumbing fixture, the corrugated hose may not be given the required bend, due to which a water seal is not formed. The desired shape of the pipe is achieved by hand. So the water lingers in the tube and does not let in fetid gases. After using the bath or shower, insert a plug into the drain hole.

Cleaning sewer lines with a grease trap

The grease trap consists of 2 components:

1. primary filter. Effluent discharged from the sink is fed into the container. Here they are cleaned of large particles of dirt.
2. secondary filter. Here fat particles are removed, purified water is drained into the sewer pipe.

Cleaning plumbing

You can remove the blockage from the siphon by disassembling the structure and washing its parts. This will help eliminate decaying waste that spreads unpleasant odors.

To clean the drain pipes of the sink and bathroom, you can use both chemicals and special equipment.

Cleaning the sink with boiling water

To clean the sink, follow these steps:

1. The sink is washed and dried with a sponge.
2. The drain device is washed with 5-10 liters of hot water.If the liquid goes into the sewer pipe slowly, the action is repeated.

Cleaning plumbing with baking soda and vinegar

If the pipes smell like sewage, you can try cleaning the drain system with baking soda and vinegar. These products remove contaminants that prevent water from flowing. 100 g of soda and half a glass of vinegar are injected into the neck of the siphon. The drain is closed with a rubber stopper or rags. The composition is kept in the drain device for 5-6 hours for the complete convergence of fatty deposits. The drain device is washed with a bucket of boiling water.

Salt, soda and cream of tartar to clean the drain

To clean the sewer system in this way, mix 1 tbsp. l. salt, the same amount of soda and 0.5 cups of cream of tartar. The composition is introduced into the waste channel, after which a glass of hot water is poured. After 2-3 minutes, rinse with running water.

Household chemicals

To eliminate the smell of sewage, acidic or alkaline compounds can be used. Mole and Tiret are considered the most effective. The required volume of liquid or powder is introduced into the waste hole, topped up with 0.5 liters of water. After half an hour, 15-20 liters of water are poured into the neck of the siphon.

Devices for dealing with blockages

Chemical products sometimes do not cope with persistent blockages. Pollution is removed with a plunger or a steel cable. In the second case, the toilet is disconnected from the sewer system.

Then they perform the following actions:

1. The tip of the cable is inserted into the pipe and the device begins to turn, moving it further. If a traffic jam appears on the way, the direction of rotation is changed. The cable is removed and washed.
2. The toilet is connected to the pipe, the siphons are returned to their place. 3-4 buckets of boiling water are poured into the drain holes.

The end of the cable is equipped with a spiral, on which you can put on a ruff, scraper or hook. The second side of the device is bent to form a handle.

Smell coming from the washing machine drum

It indicates that in the cuff of the hatch intended for loading laundry, or in the container for falling asleep washing powder and other detergents, colonies of extremely unhealthy varieties of fungus and mold have "settled". The most common reasons for the appearance of these uninvited "guests" are as follows:

1. Frequent use by the owners of washing modes with low water temperatures. To get rid of pests in this case, it is necessary to fill the machine with a special odor-eliminating agent and carry out a washing course with the highest water heating.
2. Clogging the drain pump with cloth, hair and other materials that very quickly begin to rot and exude an unpleasant odor. Cancels the problem of its quality cleaning.
3. Blockage in the drain hose. If such a trouble occurs, the hose must be cleaned.

We invite you to familiarize yourself with Odor neutralizers in the apartment A general recommendation for preventing the appearance of fungus and mold in the washing machine is to air it (and at the same time the entire bathroom) after each washing process.

There are a lot of reasons for the appearance of unpleasant sewer "aromas" in the apartment. Before you fix the problem, you need to accurately determine its source. Only by determining it, it is possible to remove sewage odors for a long time with the highest quality (on your own or by means of an organization servicing the house).

We eliminate the stench ourselves

If you still decide to act on your own, then first of all, you need to find the causes of the sewer smell in the toilet. To do this, the pipes are carefully inspected for leakage. A flashlight will help with this, as they can be almost invisible and do not form puddles.

When examining the toilet, pay attention to the presence of scratches on it. If there is no complete certainty in its presence, then you can try to dry the possible problem area with paper, and then quickly pour several buckets of water into the toilet

If a crack has really formed on the siphon, then droplets will appear in this place. It is necessary to remove and inspect the corrugation, and if necessary, change it.

When inspecting pipes, pay attention to details depending on the type of material from which they are made. The cast-iron look, if there is rust on it, is cleaned with an iron brush, and the plastic one is cleaned with a vacuum cleaner and a rag

If a stronger smell is felt at their joints, then the rubber seals should be changed.

If you need to repair cast-iron pipes, you will need a grinder or angle grinder, and for plastic pipes - sandpaper. You should also purchase repair clamps and cold welding.

Recommended reading: Conducting a video inspection of sewers

With polypropylene or PVC pipes, for a patch, you need to buy a “T” tee or pipe and seals. If the plastic of the installed damaged pipe is unknown, then the adhesive must be able to glue one and the other material. If it does not take, then this means that the pipe is made of polyethylene.

Sewer pipe cleaning

Repair in the toilet

When starting repair work, the floor in the toilet room is covered with cellophane so that sewage liquids do not damage the coating.

The cast-iron pipe is cleaned using an angle grinder with a metal brush. After work, the clean surface should shine. If a free space is found between the pipe and the wall, mount the clamp and tighten it with bolts. If this does not work, you will have to apply cold welding. They cut off a bridge equal to a hole and make a cake a couple of centimeters larger than it. Attaching to the hole and pressing hard, its edges are smeared along the pipe by five centimeters. Ten minutes later, the toilet is ready for use. Detected cracks in the pipe are sealed in a similar way, but with a smaller amount of raw materials.

In order to repair plastic pipes, they are pre-cleaned with sandpaper. Then the prepared piece of pipe is cut off, the crack is closed, glued, after which all this is smeared with sealant.

It will not be possible to glue the polyethylene pipe. Therefore, only a coupling or clamp, which is sold in a hardware or hardware store, is suitable for its repair. If this does not work out, then you will have to change the pipe.

In case of damage to pipes inside the walls, lay new ones around the damaged ones or completely change the sewerage system, which is a more preferable option.

If damage is found in the siphon or toilet bowl, then they must be replaced. It is, of course, possible to repair an existing crack using cold welding. This will save the household from an unpleasant smell for a certain period of time. However, the crack will grow and may cause the toilet to crack. If it is impossible to replace the water seal, then it is repaired.But this work is very unreliable, so at the first opportunity, the siphon should be replaced.

Toilet plumbing

Odor Eliminators

To choose a remedy, you need to know the cause of the smell in the toilet room. For example, sewer odors can be overcome by strong and harsh air fresheners. However, such funds can adversely affect the well-being of people in the apartment. The best way to kill stench is to eliminate its cause. Then no chemicals are needed.

If the sewage system is working properly, and any smell disappears through the ventilation system in a natural way, then citrus oil diluted in water is perfect for a feeling of freshness, a plate with which you can put in an inconspicuous corner and change the water there once every few days.

For the toilet use special tools. They destroy the bacteria inside and eliminate the stench. In no case should deposits and mucus appear in it.

Flavorings are not recommended to be abused, as they not only make you feel worse, but can also be dangerous for people, especially those suffering from allergies and asthma.

Violation of the tightness of the system

The reason for the appearance of a sewer odor may be a violation of the tightness of the pipe or connections. It should be noted that it is not always possible to quickly detect the place of leakage. Sometimes a hidden installation of pipes is performed in the bathroom, which makes it difficult to find the problem. Drainage slowly flows out of the leak and leads to mold growth and the appearance of an unpleasant odor.

To identify problems in the work of plumbing, it is necessary to check the places of sewer leaks. In the case of flush mounting, it is difficult to immediately notice the leak that has appeared

The place of leakage of plumbing equipment can be in the most unexpected place. For example, it is quite difficult to detect a leak in a floor slab. The most common cause of a leak and a strong sewer smell in a toilet is a loose connection between the corrugation and the drain pipe.

Having discovered this defect, it is necessary to urgently replace the corrugation, as well as restore the mandatory tightness of the pipe joint. If there are leaks in the connection between the sewer pipe and the siphon, a sealant must be used. A layer of silicone will reliably protect the junction area of ​​​​the elements of sanitary equipment from leaks.

Causes of odor formation

In every apartment or room where people work or live, there is a bathroom. It can be either a separate toilet room or a shared one with a bath or shower. And this room requires special care.

If the smell nevertheless appeared and does not disappear, it is impossible to do without finding and eliminating the cause. After all, sewer odors are harmful for human inhalation and can lead to poisoning of the body.

Incorrect installation of pipes can cause an unpleasant smell in the toilet

The main causes of an unpleasant "aroma" in the toilet:

1. Incorrect installation of sewer pipes. They must be laid strictly with a slope towards the drain. Otherwise, water and liquids will not be able to flow through the sewer at the desired speed, this will lead to the formation of stagnant areas with accumulating liquid. The smell will just appear when it stagnates.
2. Incorrect operation of the water seal.The knee-shaped siphon pipe and the toilet pipe work in the same way: the water that is there is a barrier through which gases cannot enter the air inhaled by a person. If the siphon is mounted incorrectly (without the desired angle of the knee) or the water seal itself ceases to be airtight, then all the accumulated sewage gases will enter the air and emit a stench.
3. blockage. One way or another, but this reason echoes the previous two.

This is because if the pipes are not laid correctly, sooner or later they will clog and blockage will occur. This plug will cause gases to escape from the sewer circuit under high pressure and there will be a stink in the room.

Methods for improving the smell in the apartment

You have eliminated all the pipeline problems, increased the ventilation of the premises, and the heavy, musty smell is still noticeable. At the last stage of the struggle, add products that have a pronounced pleasant aroma. Aromatherapy will help improve the atmosphere of the apartment, fill it with comfortable calmness or, conversely, add vivacity and a sense of celebration.

Store flavors

On the shelves of retail chains you can find a lot of products for flavoring the air in the apartment. These can be sprays, diffusers (transparent bottles with aromatic liquid and bamboo sticks inserted into it), scented candles, aroma lamps with essential oils, automatic sprayers. Their purpose is to make the indoor air pleasant for our sense of smell. All of them mask bad sewer fumes, but do not affect the source of their occurrence. Separately, there are neutralizers and absorbers of unpleasant odors.They are small devices filled with some kind of absorbent component. Air enters the converter through numerous holes, where it is cleaned of harmful impurities.

Strong-smelling improvised products

Folk remedies will help to make the home atmosphere more comfortable. Rooms with high humidity can be refreshed by placing small containers filled with coarse sea salt mixed with a few drops of any essential oil. Salt will remove excess moisture, and essential oil will fill the room with a light aroma. Coffee beans, citrus peel, dry herbs have a rich smell. They are poured into bowls or packed in sachets made from natural fabrics.

Placed in different parts of the dwelling, such ecological fragrances will give the apartment a subtle, subtle smell.

Cleaning

Thorough cleaning and regular airing of the premises will help improve the air in your home. Modern cleaning products successfully remove any dirt from plumbing. Apply the cleansing gel to the faience surface of the toilet bowl - it will instantly dissolve the limescale. The antibacterial components of detergents inhibit the reproduction of microorganisms and prevent the appearance of unpleasant smell from the bathroom. Do not forget about the prevention of blockages: close the drain holes of the kitchen sink or shower cabin with special nets - this way you will protect the siphons from small debris. At the first sign of blockages, try to clean the siphons with any organic-dissolving agent. They are produced in the form of a solution, thick gel, dry granules. Otherwise, the unpleasant smell of sewage will fill the house.

Get rid of excess dampness: after washing, leave the door of the automatic machine ajar, do not dry clothes in the apartment, equip the bathroom with additional ventilation. If you have pets, keep the litter box clean. Change the filler more often, disinfect the tray and the floor around it. Special aerosols will help neutralize the smell of urine.

Article checked by the editors

Ratings

Ratings

• 15.06.2020
• 2976

Which is better to choose a water heated towel rail: manufacturer rating

Types of water heated towel rails: which one is better to choose, rating of manufacturers and overview of models. Advantages and disadvantages of towel dryers. Features and installation rules.

Ratings

• 14.05.2020
• 3219

Rating of the best wired headphones of 2020

The best wired earbuds for 2019 A brief overview of popular devices designed for a variety of purposes. Pros and cons of budget gadgets.

Ratings

• 14.08.2019
• 2580

Rating of the best mobile phones for games

Rating of the best mobile phones for games and the Internet. Features of choosing a gaming smartphone. Main technical characteristics, CPU frequency, amount of memory, graphics accelerator.

Ratings

• 16.06.2018
• 862

Troubleshooting Poor Ventilation Problems

Sometimes an unpleasant odor is not due to sewage problems, but due to lack of ventilation. This problem is solved quite easily, it is enough just to make a temporary or permanent ventilation system.

If there is ordinary ventilation in the bathroom, then its performance should be checked regularly, at least once every few months. This is done simply: a piece of paper is applied, and it should deviate from the hole.In exactly the same way, you can do with a burning match, whose fire should fluctuate.

To restore the normal operation of ventilation, it will be necessary to clean it of pollution. Sometimes it is enough to clean only the area of ​​\u200b\u200bthe ventilation shaft adjacent to the apartment, but most often the problem has to be fixed throughout the house, and for this, resort to the services of a special organization. It happens that ventilation was initially created incorrectly, so the only way out is to increase the movement of air flows with the help of fans.

Why does the toilet smell like sewage, get rid of the smell

Why does the toilet smell, causes of sewer smell

If an unpleasant smell suddenly appeared in the toilet, then there is no point in trying to solve the problem with air deodorants. This will only give a short-term effect that will last only a few hours.

• problems with water seals;
• incorrect sewerage configuration created at the design or installation stage;
• the formation of hidden leaks;
• pipeline blockage.

If there is a sewer smell in the toilet, the reasons should be clarified as soon as possible.

Correction of mistakes made during installation

The discovery of these shortcomings often leads to the need for partial or complete repair of the sewer system. If the occurrence of an unpleasant odor is associated with improper design or installation of the sewer, then it will have to be disassembled and reassembled.

The biggest problem arises when the angle of inclination of the pipeline is violated. In this situation, sewage can remain in the pipes, causing not only smell, but also leading to the growth of harmful microbes.It will not be possible to quickly eliminate this problem - you will have to completely change the sewer pipeline, starting from the main sewer and ending with a plumbing fixture.

In order not to make the same mistake again, it is necessary to draw up a detailed project for the location of the pipes, taking into account the required angle for each section, before laying a new sewer pipeline.

The tightness of the joints of plastic pipes is ensured by the use of special couplings and silicone sealant. Connections of cast-iron pipes are minted, or rather, they are processed with the help of blows with a special chisel.

Eliminate odor if the water seal is not working properly

In the sewer system, unpleasant odors are usually retained by water seals. They represent a section of water in a curved section of pipelines. An unpleasant smell from the sewer is not able to penetrate through the cork formed by water. The water plug itself does not emit an unpleasant odor, since it is constantly updated with a new stream.

• the formation of blockages even in pipes of normal section;
• incorrect design of pipelines (in this case, pipes of a smaller cross section are used than provided for by the standards for a plumbing device), as a result of this, it will be necessary to completely change the element up to the very entrance to the collector.

Violation of the normal movement of wastewater during icing of pipes. The solution to this problem can be their thermal insulation (for example, with mineral wool) or heating (for example, with a heating cable).

How to get rid of leaks

Often, hidden leaks do not lead to a flood, but simply cause an unpleasant odor. Finding a place is not easy, because it can also be hidden in the interfloor ceiling.When searching for a leak, it is necessary to carefully consider all pipelines and their connections. Visual detection can be facilitated by using a brush and soapy water. A solution is applied to the joints, and then water is started. Then the pressure is measured in the pipelines and soap bubbles are formed in the places of hidden leaks.

Troubleshooting Poor Ventilation Problems

Sometimes an unpleasant odor is not due to sewage problems, but due to lack of ventilation. This problem is solved quite easily, it is enough just to make a temporary or permanent ventilation system.

If there is ordinary ventilation in the bathroom, then its performance should be checked regularly, at least once every few months. This is done simply: a piece of paper is applied, and it should deviate from the hole. In exactly the same way, you can do with a burning match, whose fire should fluctuate.

It happens that ventilation was initially created incorrectly, so the only way out is to increase the movement of air flows with the help of fans.

Eliminate urine odor in the toilet

If there is electric ventilation, then it is necessary to use it every time you leave the toilet. You can also keep a door or window open. Be sure to ventilate the room after taking a bath, as hot air after bathing accelerates the development of mold. And it also gives off an unpleasant smell.

To eliminate odors in the toilet, you can use purchased or folk remedies

If the issue with the proper operation of the sewer system is resolved and everything is functioning correctly, then you need to think about how best to clean the toilet room so that unpleasant odors do not return.

The following cleaning guidelines may be suggested:

1. Use baking soda and lemon juice. Such a tandem is very effective if you need to get rid of absorbed aromas. This mixture must be applied to the surface for 10-15 minutes, then rinsed off.
2. Use essential oils for cleaning. Their strong scent will overpower the smell of urine and sewage. Can be used on the sink (washbasin), and on the toilet, and on the bath. In addition, essential oils have good antifungal properties and can neutralize sewer odors.
3. Regular toilet cleaning. If you do not regularly clean the toilet bowl, then the smell of urine will inevitably appear in the toilet room. It is recommended to use vinegar. Of course, you need to work with gloves.
4. Regularly clean the bathroom and toilet with cleaning products.

At least once a month you need to clean the drains. After washing them and siphons, you need to pour a mixture of vinegar and soda inside to remove unpleasant odors and germs. Do not bring on the appearance of mold. Not only does it exude unpleasant odors of mustiness and dampness, it is also harmful to the human body.

Remember that proper use of the toilet and sewerage will help prevent problems with the appearance of unpleasant odors during the operation of sewage. It’s easier to stock up on chemical and folk remedies for plumbing and drain pipes than to endure unpleasant “aromas” and repair sewers.