Stinks of gas from the stove: causes of the smell of gas from the oven and burners and tips for eliminating them

The stove stinks strongly of gas: causes

The gas itself is odorless, but for safe operation, a special chemical additive is added to its composition, which creates a familiar specific aroma for everyone.

When a gas burner is turned on, a small amount of gas enters the room, causing a short-term false illusion of a leak. This is absolutely normal, no need to worry. But if a constant smell of gas is observed when the hob is turned off or working, then it is necessary to immediately find out the cause of this and eliminate the malfunction.

The smell of gas can be in two situations:

• when the stove is turned off;
• only when the hob is on.

It is necessary to look for a breakdown in these two cases in different ways.

If you smell when the gas hob is off

Such leaks are associated with a violation of tightness in the components of the gas hob.

This may be due to:

• loosening the hose connection nut;
• cracks in the hose itself or in the gasket;
• sealing gum on the connection loosened;
• incorrect installation of the hob;
• the gas valve needs to be replaced.

In order to accurately verify the location of the gas leak, use a simple method - a soapy solution. The procedure is performed like this:

• dilute dishwashing detergent or any other foaming liquid in a small amount of water, whisk;
• turn off the stove (if you have electric ignition);
• lubricate all hoses, pipe connections, threads with a shaving brush;
• if you observe bubbles, this indicates a gas leak in a particular place, if there are no bubbles, the problem is not in the internal filling.

If there is a leak, then the subsequent repair depends on its location. Broken hose - completely replaceable. If this is a threaded connection, then the matter is in the aged sealant. We unscrew the thread, clean it, apply a new sealant or winding, and assemble it again.The same algorithm of actions and if there is a crack in the gasket at the junction: it will require replacement.

If nothing is found during the soapy test, inspect the gas cock. Its repair (replacement) is the business of the gas service or a similar organization responsible for the area where you live. At the slightest doubt about your own competence in this matter, we strongly recommend inviting a specialist.

You can repair the gas valve yourself if:

• you have enough experience in locksmith work, you have already had to deal with such a replacement;
• the pipe in front of the valve is intact, there is no corrosion;
• you know where and how your apartment is de-energized;
• all necessary tools are available.

Remember: when working on your own, gas leakage cannot be avoided! To do this, de-energize the entire room, open the windows wide open.

If the gas poisons only when the device is turned on

In this case, there may be two reasons:

• too much flame. Adjust it and everything will be fine;
• leakage occurs only in those parts of the gas pipeline that are activated when the plate is turned on - nozzles, the places where the tubes exit the taps to the nozzles, the places where the tubes are connected to the nozzles.

You can check the last option with the help of a soap solution already familiar to us. After de-energizing the gas hob, remove the burners, remove the stove cover. Replace the gas burners and gently wipe all the places mentioned with soapy water and turn off the gas. Bubbling will definitely mean a leak.

Leakage at the nozzle installation site may be due to loose tightening or a defective sealing washer. Eliminated simply - tighten the nozzle, replace the washer

These operations must be done carefully so as not to disrupt the threads of the parts.

If there is a leak in the places where the pipes are attached, then most likely the reason is the uselessness of the rubber o-rings. They require replacement. It is produced in this way:

• the bracket is disconnected (if any);
• the tube is pulled out;
• the ring is removed, a new one is installed;
• the tube is inserted into the designated place;
• brace is put on.

Why does the oven smoke?

When burners are smoked in the oven, the reasons can be similar, as well as radically different from smoking a burner. Usually experts distinguish the following:

• The pressure in the cylinder or line is much higher than what is required according to the specifications of use.
• The presence of impurities in the cylinder, which make the composition of poor quality. Manufacturers or suppliers add a lot of sulfur additives to the composition, because of which the fire begins to stain dishes and pans.
• Oven settings not adjusted. Modern models from manufacturers such as Gefest, Hansa and others require very fine adjustment, which depends on many parameters, from the characteristics of the gas supply to the personal requirements of the user. With rare exceptions, the consumer will not be able to understand the intricacies of the settings, so you should call a specialist from Remontano, who will not only set it up in the right way, but also give detailed advice on how to use it.
• Clogged jets. If you can try to clean the nozzles in the burners yourself, then the device of the oven is much more complicated. Therefore, in this case, the masters are immediately called.
• Poor burner quality. Some budget models are made from low-quality materials that are characterized by minimal durability.Because of this, heating elements that have already served their time begin to work unstably. In particular, smoking may occur. Troubleshooting is simple - the broken product must be replaced. Moreover, it is necessary to use a higher quality product than the manufacturer installed.

When it smokes inside the oven, you must immediately stop cooking in it. This negatively affects its quality, and can cause severe food poisoning.

What to do with a strong smell of gas?

Many natural gases become a source of danger to humans. The greatest danger is presented by the city main gas methane and liquefied petroleum gas in cylinders. If leaked, they cause suffocation, headache, nausea, poisoning and can lead to an explosion.

Other signs of a gas leak:

• hissing sound from the pipe;
• switched on burner without flame;
• orange flame instead of blue;
• separation of the flame from the burner.

Instruction

If you feel a strong smell of gas in the room, you should immediately:

1. Shut off the gas supply by turning the valve on the pipe.
2. If the bottle emits an odor, cover it with a wet cloth.
3. Open windows and doors in the room.
4. Get outside.
5. Warn neighbors.
6. Call the emergency gas service team.

It is strictly forbidden:

1. It takes a long time to try to determine for what reason the apartment smelled of gas.
2. Perform actions that cause sparks: turn on and off the light, electrical equipment, use a telephone (stationary or mobile) near gas equipment.
3. Light matches, smoke.
4. Extinguish the flame if the gas catches fire. As long as the blue fuel burns, it will not explode.

Where to call?

To the emergency dispatch service of the gas distribution organization. Phone numbers in Russia:

• 104 - gas service;
• 112 - unified rescue service (to connect to the gas service, you must dial the number "4").

General information about the use of gas for domestic purposes

Gas is used for various purposes: as a fuel for cooking stoves, gas generators, gas water heaters, water supply boilers, heating stoves, etc.

Natural gas is mainly used as a heating component. With it, you can heat both residential and industrial premises. A slightly smaller volume of gas is used to kindle gas furnaces. The smallest percentage goes to refuel cars. Gasoline prices are constantly rising, so many motorists are switching to gas fuel. Special equipment is installed on the machine - a gas installation, thanks to which natural gas is refueled. Such installations are becoming more and more popular, but most often they can be found in trucks and buses. Such a solution helps not only to save on refueling, but also to make an environmentally correct choice - emissions from natural gas are less harmful than from gasoline.

Natural gas is also used in autonomous gas supply systems. Gas holders (special containers) are also supplied with liquefied natural gas. Their refueling should be carried out only by highly qualified specialists. For hard-to-reach gas tanks, hoses up to 80 meters long are provided. The gas supply from the gas carrier can be carried out independently in the tank; for this, equipment is installed at the facilities. Filling of gas tanks occurs only at 85% of the nominal volume.Therefore, this makes it possible to ensure the operation of autonomous gas supply systems as safely as possible.

Self-diagnosis

Of course, it is impossible to fix a gas stove on your own without certain knowledge and training, but you can independently determine the localization of the problem. This will help when calling the master to more accurately describe what happened, and also give the specialist the opportunity to take the necessary spare parts with him.

When an odor is detected, you need to establish what exactly happened:

• gas poisons the air constantly, even when the stove is turned off;
• there is an odor during operation of the device;
• the smell oozes from non-working burners while neighboring ones are working;
• The unpleasant odor is present only when turned on.

The causes of a malfunction can be different, ranging from hose defects to improper installation. There are several ways to conduct an independent primary diagnosis:

• if the smell is felt even stronger when you open the oven door, then the problem is in the faucet;
• if the smell intensifies when the device is removed from the wall, then the problem is in the communication connection;
• when the smell comes from non-working burners, the defect touched the junction of the panel and the hose.

Possible consequences

If the liquid has flooded the burner of the gas stove, the most dangerous consequence is the extinguished flame. If the model is not equipped with a gas control system (or the safety element is not functioning), this can lead to gas pollution, an explosion. If switched on gas without fire is detected, immediately shut off the supply of combustible substance and ensure maximum ventilation of the room. If the owner has filled the gas stove with water, common faults are:

• Breakdown of electrical ignition - it is necessary to check the contacts, electronic components (a task for a specialist). Contact closures usually disappear after moisture dries. If the auto-ignition unit gets wet, it will have to be replaced entirely.
• Clogged nozzles (the burner does not burn, or the combustion is weak, unstable) - the burner is dismantled, the nozzle hole is carefully cleaned with a thin object (for example, a needle). If strong, unremovable without great effort obstacles are found, it is better to contact the master.
• The appearance of soot from burners. This is caused by pollution, blockages resulting from flooding. It is enough to remove the blockage, check the condition of the flame divider.
• The weakening of pressure - there are many reasons, including liquid in the gas supply system.
• Failure of the thermocouple or solenoid valve, replacement will be required.

Corrosion is unlikely because the surfaces in contact with the liquid are enamelled.

Eliminate the problem and further threats

Only a competent gas engineer certified to work on gas equipment should work on gas equipment. Repairing a gas boiler with your own hands is not recommended. Depending on the place of depressurization, a method for eliminating the leak is selected.

Defects in gas pipes cannot be repaired by yourself. When using a tool, you can strike a spark and provoke an explosion

In case of leakage through a threaded connection, it should be untwisted, sealant residues, gaskets and winding should be removed. Old gaskets and rings are replaced with new ones.

After assembling the connection, a check is made using a soapy solution. If a leak is found in the hose, it must be replaced.

Gas Leak Safety Precautions

Natural gas is a very dangerous substance. In addition to the fact that it has neither color nor smell, it also has a psychotropic effect to some extent.

This is manifested by the fact that when it leaks, a person may not pay attention to the unpleasant smell of its fragrance and not take the necessary precautions. If you smell gas, immediately turn off the stove and oven and open a window to ventilate the room. During this time, do not smoke, light matches, turn on electrical appliances, or do anything that could cause a spark to form. It is better to immediately de-energize the apartment by turning off the machine on the shield

It is better to immediately de-energize the apartment by turning off the machine on the shield.

Types of penalties for heating stoves

Our country periodically experiences all sorts of crises and cataclysms, which affects the quality of service. As a result, the townsfolk came up with a lot of options for using gas stoves for other purposes.

For example, stoves are used not only to heat the air, but also to heat bricks, salt in the oven and other things. All of these devices are then moved to living quarters and used to raise the temperature. You can also get information about such a method as heating a large container of water to a boil. After that, the gas is turned off, and the water gives off heat to the air in the living room for a long time.

Improper use of the gas stove. Immediately after receiving the relevant information when receiving a message about such a violation, for example, after a neighbor calls the gas service, the procedure for disconnecting the consumer from the centralized gas supply system can be initiated

Do not deceive yourself and risk your lives.Since there are no completely safe options for heating a room with a stove. The reason is that it is not gas that leads to accidents, but ignoring the rules for safe use. Consumers simply leave the stoves without control (which is forbidden in itself), forget about them, fall asleep. Which leads to accidents.

This feature is taken into account by legislators, so any method of heating is considered prohibited, since this is not the intended use of the stove.

Violators of fire safety measures should be aware that various fines are provided for by law for their actions. For example, the Code of Administrative Offenses has more than a dozen articles on which sanctions can be imposed on them.

But the most severe types of punishments for heating with stoves and its consequences are spelled out in the domestic Criminal Code. So in article 168 of which it is said that for a violation that led to damage to property, sanctions can be imposed in the form of a fine of up to 120 thousand rubles. In addition, the perpetrator is allowed to restrict freedom for a period of one year.

And in Art. 219 of the Criminal Code of the Russian Federation refers to punishments for violation of fire safety measures that have harmed people's health. A large fine (up to 80 thousand rubles) is provided for such an act, and if the case is severe, then an amateur warming himself with a stove can be deprived of liberty. And for not the shortest period (up to 3 years). When the actions of the violator led to the death of people, he can be involved in many years of forced labor (up to 5 years) or imprisoned for an impressive period (up to 7 years).

Self-diagnosis of faults

To figure out if the gas smells from the oven or from the stove, you need to determine where the leak occurred.

Having determined where there is a gap, it will be easier to describe the malfunction when calling a specialist. This will help the master to take the necessary parts for the repair.

If there is an unpleasant smell in the room, it is important to understand the nature of the malfunction:

• gas enters the room even when the stove is not working;
• an unpleasant odor appears after turning on the device;
• gas oozing from the switched off burners when the neighboring ones are working;
• an unpleasant odor appears only during the ignition of the stove.

Most of the defects are eliminated by replacing a hose that has lost its tightness, a worn gasket, or a failed part. However, it is better to entrust the work of restoring the efficiency of the stove to professionals.

There are several ways to determine the cause of a gas stove malfunction.

In the process of diagnosis, it is important to follow the safety rules, keep children away from a faulty device. When it is found that the gas hob is leaking gas during operation, it is important to quickly find the leak

When a gas hob is found to be leaking gas during operation, it is important to find the leak quickly. You can define it yourself in several ways:

You can define it yourself in several ways:

1. By ear - a characteristic whistle appears at the place of depressurization.
2. By smell - unpleasant odors intensify as you approach the leak.
3. Visually - to determine the place from which the gas comes out, use soap suds. To do this, soap is diluted with warm water. Thick foam is applied to the joints of hoses, pipes, taps, threaded connections.When you turn on the appliance, soap bubbles will appear at the leak.
4. using specialized sensors. Compact devices analyze the composition of the air. In case of serious deviations, they emit a sound, light signal, and some models equipped with a cut-off valve block the gas flow.

When the presence of a gas leak is confirmed and its place is found, it is important to ventilate the room well and report the malfunction to the gas service. Do not look for a gas leak using a lighter

If gas has accumulated inside the stove, such actions may cause an accident.

Do not look for a gas leak using a lighter. If gas has accumulated inside the stove, such actions may cause an accident.

While you are waiting for the gas service specialists, it is not recommended to use electrical appliances, turn them on / off.

Troubleshooting a Gas Stove

Before starting repairs, it is important to know that all gas fittings are made of their alloys, which do not spark when in contact. In the process of restoration work, it is worth using similar materials

Of the tools, pliers, an adjustable wrench for the stove and valve, and a gas wrench will be needed.

Problem #1 - Burner Malfunctions

When the smell of gas appeared as a result of an extinguished flame, it is necessary to immediately close the valve and ventilate the room. This situation is considered an emergency, so you need to immediately open the windows wide open

When the burner has cooled down, it is important to thoroughly blow it out, clean it of food residues, grease

During the operation of the stove, soot accumulates on the burners, which can give the flame a yellow tint.This can be misleading, creating the appearance of a malfunction where there is none.

A properly functioning burner produces an even, blue flame. If tongues of yellow, red color slip through, this indicates a malfunction of the burner, the likelihood of fuel leakage

After thoroughly cleaning the burner, it is necessary to install it in place, light it, check its operation.

If any defect became the cause of the malfunction, it is worth replacing the burner with a new one.

Problem #2 - Broken Connecting Hose

The hoses used to connect the gas are sold at specialized outlets. Visually, they differ from the rest in a bright yellow shell.

The gas supply hose, connecting elements, are distinguished by a bright yellow braid. This allows you to distinguish elements suitable for creating a gas pipeline from other similar products.

When the leak is caused by a crack in the hose, it is worth replacing it. After all, the repair will provide a short-term effect and the unpleasant smell will reappear very quickly.

Problem #3 - Leak in the stopcock area

To check the performance of the unit, it is necessary to apply a soapy solution to the nozzle. If a leak is detected, immediately turn off the gas supply, call professionals. If there is a new valve, linen tow, the master will promptly replace the gas valve.

At the end of the installation, the connection is tightened until the valve is in the desired position. The correct installation is determined by repeated application of the soap solution.

The shut-off valve is located on a pipe connected to the central line. Also, the problem may be in the valve at the place where the stove is connected to the cylinder.If the connection is leaking, a gas leak may occur.

To extend the life of the connection, it is painted over with oil paint. After drying, the composition creates a dense film that can reduce the likelihood of leakage.

The smell of gas

The appearance of the smell of gas is one of the most dangerous troubles that can lead to an explosion, fire, and poisoning. It indicates a depressurization of the fuel supply system and can occur both when the equipment is turned off, and when it is turned on or during operation.

The first thing to do in such a situation is to turn off the gas supply and ventilate the room! Only then can you start examining your stove. You may not be able to fix the breakdown on your own, but you can identify the source of the leak.

The smell of gas occurs when the stove is turned off

Soapy water will help to determine the place of depressurization. Apply it to all joints of pipes and hoses, both outside the stove and inside it. Where there is leakage, bubbles will appear.

To understand how to fix this type of failure, you need to determine the type of connection. If the threaded connection is depressurized:

• disassemble the damaged assembly, check the integrity of all parts by cleaning them from winding or old sealant;
• apply fresh sealant or make a new winding;
• collect all parts and recheck.

If the connection with the gasket is depressurized:

• disassemble the leaking assembly;
• install a new gasket;
• collect the parts and retest.

The smell of gas occurs during the operation of the stove

The most common cause of this type of malfunction is incorrect flame adjustment.Less commonly, the problem is a breakdown of the connections that connect when the stove is turned on:

• nozzle installation points;
• places of connection of tubes from taps to nozzles;
• joints between tubes and nozzle bodies.

In order to determine the leak in this case, it is necessary to remove the burners, remove the cover, reinstall the burners in their places (without the cover), apply soapy water to the joints and carefully light the burners in turn. Be careful: bubbles will appear at the leak point, indicating a depressurization. The reason for such a malfunction may be the destruction of the sealing washers on the nozzles, too loose tightening of the connections, a defect in the sealing ring at the points of attachment of the tubes

The reason for such a malfunction may be the destruction of the sealing washers on the nozzles, too loose tightening of the connections, a defect in the sealing ring at the points of attachment of the tubes.

If you inspect the stove and do not find a leak, the cause of the smell may be incorrect connection of the equipment to the gas source. In this case, do not try to fix the situation yourself. You need to call a specialist!

Causes of soot

As you know, the principle of operation of gas stoves is based on the process of burning gas, or rather, its mixture with oxygen. A flame from a spark occurs only when the fuel reacts with oxygen from the air, while the hydrocarbons that make up the gas (methane with an admixture of ethane, propane and butane - in the line, propane - in cylinders) turn into carbon dioxide ( CO2) and water vapor (H2O). The optimal ratio of gas and air is 1 to 10, then the gas burns completely at the maximum temperature, and the color of the flame is blue, sometimes with purple splashes.All tongues of fire are the same height.

When less air is supplied than required, the fuel does not burn completely, and the reaction produces carbon monoxide (CO) and hydrogen (H2). The temperature of the flame in this case is lower, the color is yellow with flashes of red, and the flames are of different heights and leave black streaks of soot on the kitchen utensils. But it is necessary to fix the problem not in order to easily wash the dishes after cooking, but for the safety of the users themselves.

Since stoves can use a central or local gas source, the causes of soot are different.

Main gas supply

If all the burners of the stove connected to the gas main are smoked, the reasons may be as follows.

1. The gas pressure that is supplied to the burners is not adjusted. The stove is designed to burn a certain volume of gas per unit of time. If the flow is too strong, the gas does not have time to burn without residue.
2. The air flow that mixes with the fuel is not adjusted. The air supply in some stoves is also subject to adjustment. If the volume of oxygen is below normal, hydrocarbons in the gas-air mixture do not burn out.
3. The gas in the line contains foreign impurities. When sulfur gets into the fuel, soot deposits appear during its combustion. However, this option is unlikely - the quality of gas is monitored very carefully.

balloon gas

If a stove connected to a liquefied gas cylinder smokes, then:

• the gas pressure exceeds the recommended values;
• there are too many impurities in the fuel;
• Incorrect nozzles are installed in the burners.

The pressure of the gas that enters the line is lower than in the case of a cylinder, where the mixture is compressed to a liquid state. Without adjustment, the pressure may be too strong. In addition, often gas in cylinders comes across of poor quality, since there are many suppliers of such fuel, and among them there are unscrupulous or careless companies.

But most often on the stove, which is connected to the cylinder, the nozzles (jets) do not change. The diameter of the hole through which fuel enters the burner is designed for a certain pressure, while main and liquefied gas require different throughputs: the first needs a larger hole, the second needs a smaller one. It should be remembered that when transporting the stove from the dacha to the apartment and switching from bottled gas to the central jets, you will also need to change it, otherwise the performance of the burners will drop.

Common malfunctions of burners

In addition to the excess amount of gas that goes to the burners, problems with parts of the burners themselves can be the causes of soot. The following breakdowns are common:

• jet hole clogging;
• deformation of the divider (slotted bushings through which the gas is evenly distributed);
• contamination of the holes in the cover of the flame diffuser.

These reasons are worth thinking about when smoking individual burners. But you need to check them, even if soot forms over all burners.

What does GOST and the instruction for the stove say?

To understand the issue of the suitability of a gas stove for heating, it is enough to familiarize yourself with the contents of the instruction manual immediately after connecting the device.

Is the specified document lost or is it just too lazy to look for it and delve into the necessary wording? Then you can not waste time and just trust the norms and requirements set out in the profile GOST 33998-2016. Where in section 8 it says that each instruction attached to a household gas stove must contain a warning indicating that it is forbidden to use it for heating.

Using a gas stove for any purpose other than cooking is considered a safety violation. Moreover, any exceptions, double interpretations in this matter are not allowed. As evidenced even by the fact that stoves today are officially referred to as cooking appliances.

The corresponding inscription must be highlighted and begin with the word "ATTENTION!". Moreover, the capital letters and the presence of an exclamation mark are not an accident.

Since the test must be exactly like this, otherwise it will be a violation of the law.

In addition, according to the requirements set forth in the above GOST, on the body of each new gas stove manufactured or brought to the Russian Federation there must be at least one plate with a warning text similar to that indicated above.

If the gas stove is old, for example, still Soviet, then in its instructions it is quite possible that there is no information indicating that it is forbidden to warm up with its help. But the owners of such devices should know that this feature does not change anything and it is still impossible to warm up with a stove.

It should be remembered that the oven built into the stove, the grill is also considered a device designed for cooking. Therefore, they should also not be used for heating or performing any other tasks.

Modern gas stoves are divided into various subspecies, and also have additional functions. Which in some cases can introduce confusion and ambiguous interpretation of the terms used in relevant documents.

To avoid confusion in the wording, since the entry into force of GOST 33998-2016, all types of gas stoves are called cooking appliances.

What is true about:

• built-in hobs;
• freestanding hobs;
• tabletops;
• built-in and free-standing stoves.

The same status as stoves has been given to products such as built-in grills and built-in ovens. In addition, it is forbidden to use a free-standing gas grill for heating.

That is, there are no exceptions and stoves, like other appliances included in the same category, can be used exclusively for cooking. By the way, it is forbidden not only to heat the premises, but also to use such devices for solving any other problems.

Other factors

In addition, I note that if the burner is still lit, but the combustion is very weak, the reasons should be sought in the low gas pressure. If you see a small flame in the oven, check only when the chamber is cold. Otherwise, the thermostat will reduce the gas supply when the set temperature is reached, which is its regular function, and the diagnostics will be incorrect. If the pressure is really low, this moment should be adjusted.

If the stove runs on a cylinder, and does not ignite at all, perhaps the gas has simply run out. It is also worth looking at the condition of the gearbox, suddenly it is blocked. When the appliance is connected to the gas supply, check the valve. If everything is in order, but there is no gas, immediately call the gas service.The suspension of the supply of blue fuel is a serious state of emergency. This situation can cause airing of the system and extremely unpleasant consequences.

Smell of gas during or after operation of the gas cooker

And the last piece of advice: in case of problems with electronics, I first advise you to check the presence of current in the outlet. Plug in another device. Do not forget that repairs are carried out only when the power is off.

Pork belly in liquid smoke

To cook pork belly, you will need:

• Brisket;
• Salt;
• Water;
• Liquid smoke 1 tbsp. a spoon;
• Spices to taste;
• Onion peel;
• Bay leaf.

To prepare the dish, you need to cut the brisket into small pieces that will fit comfortably in the pan. Rinse the onion peel and place in the bottom of the pan, it will give the brisket a great taste and a golden color. We put the husk on the very bottom, sprinkle with salt on top and put the bay leaf. After that, add the brisket, and a spoonful of liquid smoke. The pan sends on a strong fire for up to 10 minutes.

After that, you need to give the brisket 6-8 hours to cool down and absorb all the seasoning and the effect of liquid smoke. After that, it must be rubbed with garlic and can be eaten. The dish is ready.

Expert opinion

The data comes from the kitchens of restaurants and ordinary homes. The smoke that was emitted during frying meat was analyzed. It has been established that the release of harmful substances is 4-10 times higher than when cooking on electrical devices.

Cancer scientists have also done experiments. To do this, they fried 17 steaks, and then an analysis of the air in the room was made. Air measurements have shown that during combustion, many harmful carcinogens are released into the atmosphere.

Scientists have named the main danger.In addition to these factors, there is a risk of leakage, which can lead to tragic consequences: explosion or poisoning. Leaks most often occur because the stove was not properly installed in the first place. Tenants, choosing between design and safety, often stop at the first option. Installation is carried out by inexperienced craftsmen, or they generally decided to save money on masters.