Termex storage water heaters with a volume of 80 liters

What are the advantages and disadvantages?

Thermex water heaters offer the following advantages:

• First of all, this is a significant saving of electrical energy. Due to low-power characteristics, electric drives are boldly used by large families without fear of wasting the budget. In general, this also applies to units with a displacement of 30, 80 liters and above units. Thus, even models with a capacity of 200 liters consume electricity in the region of 1.5 kW.
• Installation of thermex is very simple and does not require complexities and time-consuming.Moreover, this applies to the installation itself, and the preparation of a place for installing the unit. Regardless of the size of the boiler (30/50/80), thermex is a compact, flat, horizontally or vertically oriented unit with small dimensions. Among other things, the company offers options of any shape, which will allow you to install the latter in the most inaccessible places while saving space.
• Thermal insulation. Given the efficiency of the devices, it should be noted that all thermex electric water heaters are equipped with excellent thermal insulation. This allows a vertical or horizontal appliance to be connected to electricity less often.
• High heating rate. The storage device, as a rule, does not supply hot water to the consumer. Therefore, an important criterion for this kind of apparatus is the heating period of the tank. Based on user feedback, a flat heater with an 80-liter boiler tank heats water almost instantly, and then maintains the temperature for a long period of time.
• It is worth noting the excellent appearance of the unit, which fits very harmoniously into the design of any bathroom.
• Ability to connect multiple users at the same time.
• High water temperature.
• The presence of a display for setting modes.
• Plastic outer tank and stainless steel inner tank, which improves strength and reliability;

As the main disadvantage, it is worth noting the need for a free installation site. In addition, there are special maintenance rules: regulation of cleaning the tank, heating element and replacing the anode at the same time.

Summary - pros and cons

A review of the reviews allows us to conclude that the quality of the product is acceptable, subject to the rules of operation and periodic inspections. It is difficult to say which water heaters of this company are better to buy - with an internal coating of glass-ceramic or with stainless steel tanks, a lot depends on the quality of the butt welds in the second variety. The Termex assortment even includes boilers with a tank made of an alloy of steel and titanium (Round Plus series), but there is no clear definition that you need to overpay for it, in the end everything is decided by individual preferences and budget

When choosing a water heater, attention is also paid to the type of heating elements (tubular heating elements are definitely more reliable than spiral ones), the presence and thickness of the heat-insulating layer

The owners of Termex boilers note such advantages of operation as:

• Profitability: energy consumption is lower than that of 80 liters of analogues from other manufacturers.
• Ease of connection, minimal wiring load.
• High temperature heating - up to 74 °C.
• High quality body and inner tank materials.
• Aesthetics, attractive design of Termeks models.
• Manufacturer's warranty depending on the modification and raw materials: 1-2 years for the electrical part, 5-7 years for the internal tank.

7. Adaptation of Termex products to Russian operating conditions, power surges of 220 ± 10% V are allowed, some models operate at low network pressure, reliable safety valves eliminate the risk of overheating.

8. The presence of a control display with self-diagnosis and status indication (for modern series of the Termex Flat Diamond type, the ability to switch power modes (and, accordingly, save electricity).

9.High class of protection against moisture: IP 24 and 25.

But the assessment of the owners of storage water heaters from Thermex is far from always positive. There are such shortcomings as: the need for periodic technical inspection and replacement of one-time magnesium anodes, cleaning. Round Termex models take up more space, there is not always free space in the apartment for their placement, boilers with a heat-insulating layer are considered cost-effective. The need for protection against hard water was noted, the installation of filtration systems is recommended.

Price

Model name Termex	Heating power, kW	Dimensions, mm	Water heating time, min	Price, rubles
Flat Diamond RZB 80-L	1,3/2	495×1005×270	130	19 000
IF 80V	497×1095×297	19 550
ERS 80 V THERMO	2,5	445×751×459	96	10 250
ID 80V	1,3/2	493×1025×270	130	16 590

ThermexFlatPlusIF 50V

Electric water heater "Termeks": 50 liters capacity, 2 kW power.

According to consumers, the main advantage of the electric tank model under consideration is its compact overall characteristics, thanks to which the device will find a modest corner even in the smallest bathroom. Among the minuses - it does not keep the water temperature well, which is why you have to turn it on every 30 minutes (if necessary) to heat the water, respectively, once again operate the heating elements and waste electricity, losing money.

By the way, about tenah. In the first 12 months of operation, the heating element is completely covered with scale. In order to avoid a quick failure of the heating elements, it is recommended to replace the copper elements with steel ones during the first maintenance of the tank and install a large magnesium anode for each.

Rating of the 15 best models of Termex boilers for 80 liters

We bring to your attention the TOP-15 of the best water heaters from the Thermex brand for 80 liters. This rating is based on the technical characteristics of electrical equipment, reviews of people who bought and tested the operation of the device from this company.

Thermex Praktik 80V Slim

• Price - from 9600 rubles;
• Dimensions - 44.5x75.1x45.9 cm;
• Power - 2.5 kW;
• Country of origin - Russia.

Thermex Praktik 80 V Slim water heater

pros	Minuses
Two heating elements	Thermal sensor not working well
compactness	Poor pressure relief valve
The tank is made of stainless steel

Thermex RZB 80L

• Price - from 15930 rubles;
• Dimensions - 49.5x100.5x27 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex RZB 80 L water heater

pros	Minuses
Design	Case gets very hot
compactness	Tank starts leaking fast
flat shape

Termex rzb 80 f

• Price - from 14282 rubles;
• Dimensions - 49.3x102.5x28.5 centimeters;
• Power - 2 kW;
• Country of origin - Russia.

Thermex rzb 80 f water heater

pros	Minuses
The bank is made of stainless steel	Poor assembly
Maintains the set temperature for a long time	There is a possibility of hull damage
Heats up water quickly

Thermex IR 80-V

• Price - from 8390 rubles;
• Dimensions - 44.7x82.3x46 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex IR 80-V water heater

pros	Minuses
Comfort control	Maximum temperature 65 degrees
Beautiful design	The temperature sensor is not working properly
The tank is made of stainless steel

Termex ER 80 S

• Price - from 7818 rubles;
• Dimensions - 72.5x45x44 centimeters;
• Power - 1.2 kW;
• Country of origin - Russia.

Thermex ER 80 S water heater

pros	Minuses
Classic design	Mechanical control
Heats up water quickly
Consumes little electricity

FSD 80 V (Diamond)

• Price - from 15947 rubles;
• Dimensions - 55.5x103.5x33.5 centimeters;
• Power - 2 kW;
• Country of origin - Russia.

FSD 80 V (Diamond) water heater

pros	Minuses
Beautiful design	oversized
Flat
Several mounting methods

Thermex ERD 80V

• Price - from 9000 rubles;
• Dimensions - 43.8x81x46 cm;
• Power - 1.5 kW;
• Country of origin - Russia.

Thermex ERD 80 V water heater

pros	Minuses
"Dry" heating element	Heavy
Classic design	Mechanical control
small size

Thermex Bravo 80

• Price - from 13965 rubles;
• Dimensions - 57x90x30 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex Bravo 80 water heater

pros	Minuses
Two installation methods	No water drain hose included
Trendy design
Electronic control

ERS 80V Silverheat

• Price - from 6132 rubles;
• Dimensions - 44.5x75.1x45.9 cm;
• Power - 1.5 kW;
• Country of origin - Russia.

ERS 80 V Silverheat water heater

pros	Minuses
Easy control	There is a possibility of a quick leak of the tank
budget cost
Consumes little electricity

Thermex Giro 80

• Price - from 5880 rubles;
• Dimensions - 44.5x75.1x45.9 cm;
• Power - 1.5 kW;
• Country of origin - Russia.

Thermex Giro 80 water heater

pros	Minuses
Withstands temperature fluctuations	Bulky dimensions
Ease of installation and operation	Difficulty draining water before shutting off
The tank is covered with bioglass porcelain

Thermex Optima 80

• Price - from 11335 rubles;
• Dimensions - 57x90x30 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex Optima 80 water heater

pros	Minuses
RCD	Heavy
Stainless steel tank
Electronic control

TitaniumHeat 80V

• Price - from 5245 rubles;
• Dimensions - 44.5x75.1x45.9 cm;
• Power - 1.5 kW;
• Country of origin - Russia.

TitaniumHeat 80V water heater

pros	Minuses
Classic design	Mechanical control
Minimum power consumption	Takes a long time to heat up
Multiple wall mounting options

Thermex MK 80V

• Price - from 13290 rubles;
• Dimensions - 51.4x99.3x27 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex MK 80 V water heater

pros	Minuses
Anti-corrosion protection	Only one heating element
Three operating modes	Mechanical control
Stylish design

Thermex Solo 80V

• Price - from 8940 rubles;
• Dimensions - 41.4x78.7x42.5 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex Solo 80 V water heater

pros	Minuses
Weighs little	One heating element
Stainless steel tank	Does not tolerate pressure surges
Comfort control

Thermex MS 80V

• Price - from 12930 rubles;
• Dimensions - 51.4x99.3x27 cm;
• Power - 2 kW;
• Country of origin - Russia.

Thermex MS 80 V water heater

pros	Minuses
Quickly heats water to the set temperature	There is a possibility of tank leakage (manufacturing defect)
Electronic control
Quality build

Pros and cons

Boiler Termex 80, for example, flat, silverheat or other models, has the following advantages:

• Economical power consumption, since the energy consumption of such water heaters is only 1500-2000 W;
• Does not require complex installation. You can install it yourself with a minimum number of tools;
• High-quality thermal insulation functions;
• Possibility of vertical and horizontal fixation on the wall;
• Heat up water quickly. In particular, this applies to storage types of equipment;
• High heating temperatures;
• Convenient thermostat;
• You can choose the operation of one or two heating elements (subject to such a configuration);
• Rugged and reliable housing.

And now about the disadvantages of water heaters:

• Space required for installation;
• Mandatory compliance with the rules of operation and maintenance (cleaning the tank and heating elements from scale, replacing components, proper switching off and on);
• Mandatory study of the instructions before the first use, in order to avoid malfunctions, expensive repairs;
• Compliance with the rules for connecting to the electrical circuit. Otherwise, the device simply will not turn on.

Are you still thinking about buying or not? Then check out the rating of the Termex models for eighty liters, indicating the sizes, advantages and disadvantages, as well as other important parameters.

Thermex - expectations and reality

made in China

The reviews that are posted in this article will help you explore the most pressing issues:

• How many years did the heater last?
• Were there any breakdowns and how they were eliminated;
• Are users satisfied with the purchase;
• Did you like the design of the boiler?

Perhaps, according to the reviews, you will choose for yourself that Termex model that has shown itself in operation from the best side.

Users willingly share the smallest details of the "pitfalls" of their boilers for 80 liters Thermex RZB 80-L:

Briefly listing the advantages of Thermex RZB 80-L: a beautiful mirror tank, sophisticated electronics, then only about the shortcomings. I will say frankly that this is not a heater, but a beautiful decoration of the design.Many bought it precisely because of its attractive appearance and promising advertising.

So, we bought it and installed it ourselves - it's very simple, the anchors and the check valve were included. It turned out very beautifully, and I, being squeamish, went to read reviews about this “diamond”. I was dumbfounded, but I thought it would somehow blow over, but it didn’t ...

After 6 months, problems began, the tank and pipes began to shock, and then it stopped heating at all. They dismantled it in the service - one of the heating elements was simply turned around. Then, one after the other, another 3 heating elements burned out, and those that are 1.3 kW always burn, and the native one still works at 0.7 kW. The most interesting thing is that the service found the absence of a magnesium anode - it simply was not there!

The anode in such tanks is not in vain, it protects the heating elements. But the magnesium anode is eaten (in all seriousness) with giblets in 6-7 months and you need to change it, otherwise the heating elements and the tank will get a lid. And to change the anode like this: 1. Remove the tank; 2. Drain the water; 3. Remove heating elements; 4. At the end, the gaskets under the heating elements will need to be replaced. I also advise you to take a picture of the connection diagram during disassembly, so as not to confuse later.

If you miss the time to replace the anode, then the reaction will already begin to “eat” not the anode, but the seams of the tank, which happened to me.

Not only did it take a lot of time, but also all the replacements of heating elements, of course, at their own expense, each time it took about $ 25 for new spare parts ... It has to be disassembled every 6-7 months. The guarantee for the heating element, by the way, is 6 months, and it works 1 month longer.

That's it! I do not advise RZB 80-L to anyone!

Product Review Site

There are those for whom this model served regularly:

Our model Termex RZB-80 worked for 3 years in the country. Moreover, in the winter we did not use it, the dacha does not burn off, the voltage is supplied with jumps.He worked under such unsweetened conditions without problems for all three years, now he began to pierce with current. We'll still make it through the summer, and then we'll see.

Reviews on the site about the repair of boilers, Denis

The impressions are very different due to the fact that in one case the water heater worked constantly, thereby actively consuming the magnesium anode. And in the second case, where he was in the country, he worked only in certain short seasons.

Reviews about other models:

We have a Termex water heater model IR-150V, which has worked for a year without problems. After that, one of the heating elements turned off, and two days later, the second one. The main reason I see is that our area has very hard water. Cleaning showed that inside there was a third of a bucket of scale, now I will clean it more often and I hope that everything will work stably. I also have a second water heater of the same company IF - 100V, which works well so far, but I will urgently clean it anyway. In general, I have no complaints about water heaters, except for the nuance with scale.

Internet resource

Oh, and we suffered with this ID80V for 3 years. I listened to friends for whom the same ID works without problems. Yes, it is also beautiful, sensory - just a dream! Very tired of problems with the check valve, it is covered all the time. According to the reviews on the sites, I realized that buying Termex with electronics, as well as a pig in a poke. We will never buy a water heater from this company again.

Reviews on the site about the repair of boilers, Diana

My report on THERMEX ER 80V, which I have been using for over 10 years. During this period, all components, including heating elements and sensors, are native from the manufacturer's factory.The only replacement of all time is the magnesium anode, which, of course, has worn out in the meantime. Conclusion: a good and reliable unit!

Product reviews site, Anatoly

Connection rules

The installation and connection of the purchased water heater should be carried out exclusively by a specialist, since self-connection can lead to the complete cancellation of the factory warranty, but if you decide to manage with your own knowledge and strength, you need to remember the following:

• installation of the device is best done near the point of use, then there will be no loss of water temperature;
• the wall for mounting the boiler must be strong and stable, since the water heater has an impressive mass and dimensions;
• the floor of the room where the boiler is installed must be fully waterproofed.

The installation and connection process consists of the following steps:

• boiler mounting;
• connection to the water supply network through a filter, the joints are sealed with flax (the process is described in detail in the diagram);
• connecting the device to the mains.

The connection for all models of water heaters is approximately the same, it does not depend on whether the device is with a dry heating element or not, what type of suspension is horizontal or vertical. To understand everything and avoid mistakes, you need to study the instruction manual.

Maintenance and repair

During the operation of the device, the heating element accumulates salts and other deposits, and sediment collects on the inside of the flask, which eventually leads to its failure. In addition, sensors and relays break.

Signs of a boiler failure include:

• water heating takes longer than expected;
• the appearance of extraneous sounds inside the tank, which were not observed before;
• RCD is triggered;
• the unit does not heat the water at all;
• the quality of the outlet water has changed;
• no power supply signal, or the device does not turn on at all.

Before disassembling and carrying out repair work, including the replacement of a broken spare part, the boiler must be de-energized and drained of water, and, if necessary, a complete dismantling. Eliminating the breakdown yourself or with the help of a specialist, you always need to find out the causes of what happened in order to avoid unpleasant situations in the future.

The most frequent breakdowns and the reasons that led to them are a few points.

Tank leak. This happens due to wear of the seal (gaskets). They need to be replaced and rewinded in the areas of flange connections

The leakage of the container can provoke corrosion, which in this case is not repairable.
The water has stopped heating, but the heating element is in perfect order, then you should pay attention to the thermostat.
Damage to the heating element can be eliminated by cleaning it from scale and salts. To check if the heating element has burned out, it is necessary to remove the boiler cover so that the terminals are accessible and check the current flow

If voltage is present, and the heater does not heat the water, it must be replaced.

To extend the life of the boiler, you need to use it strictly for its intended purpose, and take preventive measures, which include annual cleaning of the heating element from accumulated calcium and magnesium deposits. The usual solution of citric or acetic acid will cope with this. In addition, you need to use high-quality filtration systems and special water softeners.

How to connect and install a THERMEX water heater with your own hands, see the video below.

Problem areas of Thermex boilers

three weaknesses

1. magnesium anodes are often consumed;
2. heating elements deteriorate;
3. fails electronics.

Reviews and advice from experts on the experience of using Termex water heaters can tell you more about this.

Heating elements and magnesium anodes

The problem in Termex is that there is a need to change the heating elements and anodes due to the hardness of the water. The anode performs the function of protecting the weld in the stainless steel tank from corrosion. Accordingly, after some time the anode wears out (about six months), and the heating element and the tank seam are gradually destroyed. There is only one way out - 2 times a year to change the anode, which costs about $ 5, and if you call a specialist, then you yourself understand ...

Andrew

Electronics

As a boiler repair specialist, I know firsthand about Termex (and other) electronics. Often it is "buggy" due to interference in the mains. It takes time and a competent specialist to calculate this. My clients have repeatedly asked me to replace electronics with mechanics.

Sasha

Temperature sensors

Dmitry: I have a 50 l Thermex flat boiler. It has been working for me without breakdowns for 3 years, and my neighbor has the same one for 2 years. The only concern is that after washing the dishes (no more than 20 minutes), the electronic display gives a low temperature, you have to wait a long time. Dmitry

Answer of the specialist: The fact is that the temperature sensor is placed at the bottom, where cold water is filling the boiler. Simple physics - hot water at the top, cold at the bottom. Therefore, the sensor does not show the overall temperature, which can be quite comfortable, but the lower one, which has just come from the system.

Reviews on the site about the repair of boilers

What are water heaters

All water heaters can be divided into 2 large groups: storage and flow.

1. A flow heater is a device that heats water as soon as it passes through it.The installation of flow heaters in most modern apartments is not possible without additional manipulations, since for the instantaneous heating of water, which a flow heater has, a large power consumption is required, which not every wiring can withstand. This means that an additional power cable is required.
2. A storage water heater is a special tank with a heating element inside, into which water enters, heats up to the desired temperature and remains in it, maintaining this temperature. It is storage water heaters that are most often installed in modern apartments.

How to choose?

Any electrical appliance is selected according to certain criteria, and the boiler in this matter is no exception.

When choosing a water heater from a well-known manufacturer Thermex, you should pay attention to some factors.

• Heating element. It is preferable to choose models with built-in heating elements, and not spirals, since the latter quickly burn out.
• The material for the manufacture of the tank and housing, since the duration of the operation of the device depends on this. It is also desirable that there be an antibacterial coating and protection against corrosion and mechanical stress.
• The presence of a safety valve, which is necessary to drain the water in the event of a long break in the operation of the device.
• Anti-corrosion anode, which performs a cleaning and protective function.
• Protection class. High quality of work of the device is provided with the level of protection of IP 24 and IP 25.
• The power of the water heater and the presence of different modes, with which you can significantly save electricity, and hence money.
• Installation method: vertical or horizontal.With a horizontal arrangement of the device, a uniform distribution of water of the same temperature occurs.
• Type of device - storage, flow or combined boiler.

Instructions for use contain information of the following nature:

• purpose of the device;
• main technical characteristics;
• equipment;
• detailed description and principle of operation of the water heater.

The last is a paragraph that includes precautionary measures, which spells out everything that cannot be done:

• turn on the boiler in the absence of water in the tank;
• remove the cover while the device is in operation;
• use the boiler in the absence of a filter, etc.

Thermex

Their technological developments are fully consistent with all the required needs of consumers. They produce only electric water heaters of storage and flow type.

Termex boilers are equipped with:

• Silverheat electric heaters (silver, against bacteria and scale);
• a tank with an internal coating BIO-GLASSLINED (bio-glass porcelain): strengthens the tank, keeps the water fresh for a long time;
• protective shutdown safety system (RCD);
• for the manufacture of tanks used austenitic (non-magnetic steel, contains 10% nickel and 18% chromium) stainless steel.

Termex instantaneous water heaters:

• models for installation in a hidden, open way have been developed;
• can provide hot water to several points of consumption;
• provided with copper heating elements;
• there are flow-accumulative models - of various shapes, small in volume and convenient to use.

Like other manufacturers, Termex produces boilers of various shapes, different diameters, tank volumes.

Please note: Termex flow type models have no analogues on the market.

They are designed in different versions: the design includes all connectors for connecting several points of consumption (shower and sink, 2 shower cubicles, other consumers), and the power is close to 8 kW (see characteristics).

Owner opinions

“I got an electric boiler Termex with a volume of 80 liters when buying an apartment, according to the owner, the model worked fine for more than a year

After some time, I noticed the noise inside the tank, did not wait for leaks and called the master. During disassembly, it turned out that the heating element and the bottom of the device were covered with salt deposits, replacing the heating element and cleaning the tank helped

After the repair, it works without interruption, the need for hot water is blocked.

Vladislav, Yekaterinburg.

“Having decided to buy a water heater with a tank of 80 liters, I chose a manufacturer for a long time, and settled on Termex, in particular, the RZB 80 L series. Noticed pluses: stylish design, compactness, status indication, reliable fuse. Cons: Cost and poor resistance to corrosion. The water heater operates in two modes - at 1300 and 2000 kW, the output volume is sufficient for the needs of my family, the electricity consumption is satisfactory.

Kirill, Omsk.

“I have been using a Thermex water heater for more than 2 years, in general I am satisfied with it. Once a year I invite the master, and he conducts a technical inspection, usually on the same day I change the one-time anode, the replacement of the dry heating element was not required. In general, I consider the quality and reliability of the model acceptable, there were no problems with maintenance. After power outages, Termex starts up by itself.”

Leonid, Simferopol.

“I consider the Thermex brand water heater with a tank capacity of 80 liters an acceptable alternative for apartments without gas water heaters. I advise you to buy a Termex model with a glass internal coating of the tank, their cost is at least 500 rubles less, and in my opinion they last longer. It is also worth checking the presence of a magnesium anode, not all boilers have it. The manufacturer’s basic kit includes fasteners and safety valves, these products are certified, you don’t need to overpay for anything.”

Pavel, Volgograd.

“When choosing a storage water heater, my husband and I settled on 80 l Termex, with the most common design - round. I evaluate his work positively, the boiler keeps heat well, rarely turns on, makes little noise, power consumption is tolerable. During installation, they made a mistake and did not provide a hose to remove excess water, at first the valve just dripped, after being sent to the sewer, the wiring looks a little clumsy, I advise you to take this moment into account right away.

Inna, Moscow.

“I installed an eighty-liter Termex storage water heater at home a year and a half ago. I immediately bought filters, our water hardness is high. I replaced the anode myself a year later, at the moment the Termex boiler is working fine. I have an internal coating of glass porcelain, there were no leaks during the service, there was no rust either.

Maxim, Rostov.

Results

Let's compile a summary table of the best water heaters of 2020 from Thermex with a description of their features.

Rating	Model name	Power	Functional	Volume of the tank	Price
1	Thermex Champion Silverheat ERS 50 V	2 kW	power indicator, heating indicator, thermometer, water heating temperature limiter	50 liters	from 5700 rubles
2	Thermex Champion Silverheat ESS 30 V	1.5 kW	power indicator, heating indicator, thermometer, water heating temperature limiter	30 liters	from 5000 rubles
3	Thermex ER 300V	6 kW	power indicator, heating indicator, heating timer, self-cleaning, thermometer, water heating temperature limiter	300 liters	from 25500 rubles
4	Thermex Mechanik MK 80V	2 kW	the device has all the necessary functionality - power indicator, heating indicator, water temperature limitation	80 liters	from 10700 rubles
5	Thermex Flat Plus Pro IF 50V (pro)	2 kW	thermometer, self-diagnosis, temperature limit, rapid heating	50 liters	from 8100 rubles
6	Thermex Mechanik MK 30V	2 kW	power indicator, heating indicator, water heating temperature limiter	30 liters	from 8500 rubles
7	Thermex Thermo 50V Slim	2 kW	power indicator, heating indicator, water heating temperature limiter, rapid heating	50 liters	from 6200 rubles
8	Thermex Fusion 100V	2 kW	power indicator and water heating temperature controller	100 liters	from 8400 rubles
9	Thermex Solo 100V	2 kW	thermometer, temperature limit adjustment, power indicator	100 liters	from 4300 rubles
10	Thermex IC 15 O Inox Cask	1.5 kW	power indicator and water heating temperature controller	15 liters	from 11500 rubles

Thus, an ideal water heater should have a power of 2 kW or more, a tank volume of 50 liters or more, built-in programs (thermometer, water heating temperature limitation function). The price and appearance depend on the personal preferences of buyers.Thermex offers its customers devices that meet all of the above requirements, with different price categories, ranging from budget models to premium. It is also worth noting that the functional features of inexpensive models are in no way inferior to their prestigious "brothers".