Mohlenhoff convector heaters from Germany

Convectors Jaga

These are convectors with an almost impeccable reputation. The heat exchanger is made of a seamless copper tube with a diameter of 15 mm and a wall thickness of 0.4 mm. The convection plates are pure aluminum, not an alloy. The thickness of the plates is 0.2 mm, they are not smooth, but profiled. So with smaller dimensions, they give off more heat. Brass adapters are installed on the pipes for connecting to the heating system. In this form, the device is compatible with any pipes. They have a 1/2" internal thread. Can be used in one- and two-pipe systems.

There are five lines in total, three of them with natural convection, two with forced convection.

without fan

JAGA Canal Compact and Plas Metal are waterproof models.The anodized steel body is coated on the outside with a layer of waterproof polyester. The inner surface is lined with dark gray polyethylene foam. To prevent the penetration of water through the grate, fiberboard is placed under it, which allows air to pass through, but does not allow water to pass through.

Model Mini Canal DBE

Mini Canal is the most "hardy" of all built-in convectors "Yaga" test pressure 25 bar, warranty period - 30 years. Can be installed in multi-storey buildings. Box made of galvanized steel. To protect against corrosion, it is coated with a dark gray lacquer (so the components are not visible in the installed version). This is the most inexpensive built-in convector from the products of this brand.

With forced convection

Micro Canal is the smallest in size. Equipped with a 24 V tangential fan with a low noise level of 22 dB / m, built-in anchor bolts for height adjustment from 6 to 8 cm. Stainless steel grille is standard. It has two casings - the outer one (it is attached first), then the inner one is inserted. The heat exchanger is connected with flexible stainless steel pipes (included). This makes it possible to remove it from the casing when cleaning.

Floor convector installation

Mini Canal DBE - for low temperature operation. Compatible with solar panels, heat pumps, condensing boilers. It works effectively even with a heat carrier with a temperature of +35oC. Can be connected to ventilation systems (optional). Equipped with a 24V or 230V fan.

High thermal power (3-4 times more than other models of the same size) is achieved by installing a powerful heat exchanger. The grid is included in the basic package.

Mounting and installation requirements

Installation rules are described in detail in the instruction manual. The main installation guidelines are:

• One side of the housing is installed raised to ensure unhindered condensate drainage into the drain pipe from the convector.

There are two types of transformers - one for dry rooms, the other for wet rooms. The type of room must be taken into account when choosing a converter.

The exact selection of convectors according to the heating area is important. The installed heating system must exceed the minimum power parameters by 10-15%.

After the installation of the convectors, the grate is mounted. The decorative top grille should be flush with the floor.

Mohlenhoff convectors with ventilation and heating

Mohlenhoff system convectors are available in three types: with forced and natural air circulation, as well as models of a combined type. Models with ventilation and heating are the most efficient. Forced convection is carried out using a tangential fan. As a result, the heat transfer of devices increases by 30-40%.

Some of Mohlenhoff's underfloor water heating convectors of the combined type work in summer for cooling, and in winter for heating.

The technical characteristics of Mehlenhoff devices with forced circulation are as follows:

• Minimum noise level - the operation of circulation fans is not accompanied by a strong background noise. Built-in Mohlenhoff electric convectors with forced convection can operate in natural air circulation mode.The built-in sensor automatically turns the fans on and off as needed.

Connection to the mains - the installation of convectors and the power connection is carried out through a special transformer. For wet rooms, a special moisture-proof model of the rectifier is selected.

Principle of operation. Devices work on heating and cooling of air. The fans are controlled by the control unit. Housing with drainage outlet. The condensate that appears during operation is automatically removed from the heater. The convectors are controlled by temperature sensors located in the heated room. When the room cools down, a signal is given to turn on the fans, as well as to increase the intensity of the coolant supply in the heating system.

Combined models with natural and forced convection are the optimal solution for residential heating. At night, the device can operate without the use of fans, without interfering with night rest.

Benefits of Mohlenhoff floor convectors

Consumers note several advantages of Mohlenhoff heating systems. Sophisticated design and reliability are the main positive characteristics of the product. There are several other benefits.

Design

The case of heaters is thought over to trifles. Due to the special suspension design, there are no extraneous noises during operation. The housing with a drain outlet provides a quick condensate drain, which is easy to remove by removing the grate.

Mounting

The ease of installation is especially noted by the construction and plumbing teams.To connect, it is enough to prepare the appropriate niches, connect the pipeline and / or electricity.

Long service life

The body is made of aluminium, not subject to corrosion. The copper core has a high heat dissipation, does not deform or rust over time.

Mohlenhoff offers the consumer high-quality and reliable heating systems. Built-in convectors are suitable for heating rooms of any type and area.

Floor convectors Mohlenhoff

Mohlenhoff convectors allow you to solve the problem of heating rooms with panoramic windows, whether it is an apartment with a trendy French balcony or such a huge space as an airport lobby, an exhibition pavilion or a winter garden. Installing the convector in the floor in front of the window space eliminates fogging of the glass and creates a thermal curtain for the cold air flow coming from the window.

Types of floor convectors Mohlenhoff

1. Models with natural convection (circulation) of air. These include the WSK product line. The heat exchanger of such convectors provides an influx of cold air both from the side of the window and from the side of the room.

2. Models with tangential (forced) convection. These are more powerful models of the QSK EC line. The built-in fan is powered by the motor, consuming little energy but providing more heat. The efficiency of such devices is considered as close to 100%.

3. Both heating and cooling models are QSK HK series. They are an excellent solution for creating an ideal indoor climate at any time of the year.

Mohlenhoff convectors as the optimal solution

The design features and decorative design of the grid of Mohlenhoff floor convectors help them fit into any design, and the placement features (in the floor) maximize the usable space of the room, ensuring its efficient heating or cooling.

A large range of models allows you to choose exactly the devices that you need: electric or water, with an influx of air from the outside, energy-saving, etc. Mohlenhoff also offers all accessories required for the installation and connection of trench convectors.

Mohlenhoff Products and system solutions for heating and air conditioning technology for maximum efficiency are state-of-the-art. Mohlenhoff products are characterized by ease of installation and maintenance, beautiful shape and reliability.

Floor convector Mohlenhoff ESK

The ESK system convector uses the principle of natural convection and cold air shielding.

Floor convector Mohlenhoff GSK

The GSK system convector with radial fan works on the principle of natural and forced convection created by the fan.

Floor convector Mohlenhoff QLK

System convectors of the QLK series provide a targeted supply of primary air in winter and summer.

Floor convector Mohlenhoff QSK EC

The system convector with the QSK tangential fan works on the principle of natural and forced convection created by the fan.

Floor convector Mohlenhoff QSK HK

System convectors of the QSK HK series (convectors with a tangential fan for heating/cooling modes) are designed for both heating and cooling indoor air.

Floor convector Mohlenhoff WSK

The WSK hot water system convector works on the principle of natural convection.

Mohlenhoff built-in electric convectors

There is another type of heating convectors built into the floor, which is an alternative to water heating systems. Mohlenhoff produces electric heaters that work on the principle of natural and forced convection.

What characteristics distinguish Mehlenhoff electrical equipment?

• The body is made of massive aluminium. From above decorative lattices for the convector are established. Beautiful appearance makes it possible to use heating devices in exhibition halls, office and administrative centers, etc.

Heating element - a heating element is used, operating from the usual household voltage of 220V. The connection of floor convectors to the network is carried out through a special distribution block. An earth connection is required. The heating element has copper fins, which increases the heat transfer of the device.

Principle of operation. The Mohlenhoff floor convector with electric heating element works on the principle of natural convection, but can be equipped with a fan for better performance. The connection with the temperature controller is carried out through the control unit. It is possible to adjust the operation using the remote control. To do this, a remote control element for Mohlenhoff trench convectors is mounted in the control unit.

Electric convectors must be connected to the mains by a qualified electrician with the necessary permits and qualifications.

Convectors Mohlenhoff (Mehlenhoff) from the official dealer with discounts

Mohlenhoff - promising ideas. The technical know-how and more than 25 years of production experience of the German company are decisive for success. Convectors Mohlenhoff (Möhlenhoff), built into the floor, allow you to successfully find architectural and construction solutions wherever there is a large area of ​​\u200b\u200bpremises with panoramic windows (residential premises, winter gardens, swimming pools, penthouses, country houses, restaurants, office premises, exhibition halls and administrative building).

Built into the floor level and covered with a decorative grille, Mohlenhoff floor convectors not only perform their main function - heating devices, but also are an original design element of the room. Architects, designers and building contractors appreciate the significant advantage of Mohlenhoff convectors for their invisibility: the heat comes from the floor, and only the unique convector grille is visible on the surface, which harmoniously fits into any interior. Mohlenhoff floor convectors are designed for heating enclosed spaces with panoramic glazing as the only source of heat or in cases where it is necessary to compensate for the lack of heat with installed heating devices. Convectors can be built into the design of both monolithic and raised floors. Heating with convectors helps to avoid condensation of water on the glass and the effect of misted windows.

Mohlenhoff system convectors

The Möhlenhoff convector consists of a heating element laid on a specially designed stand and a box (aluminum alloy sheet protected from corrosion by anodizing), which is covered on top with a decorative powder-coated aluminum grille (color can be selected according to the entire RAL range). The heating element is a solid copper pipe, bent in several rows, with copper plates soldered onto it, thanks to which the convectors achieve maximum heat output.

Mohlenhoff system convectors are available in two types: with natural air circulation - model WSK and with built-in fans for forced air circulation - model GSK. Non-standard solutions are also available - corner and radial convectors.

Mohlenhoff water models

German Mohlenhoff floor convectors are suitable for heating dry rooms. The design includes a 2-pipe heat exchanger.

According to the technical information provided by the manufacturer, the heaters have the following characteristics:

• Casing - built-in water convectors with forced ventilation are made of anti-corrosion steel. A decorative aluminum grille is mounted on top. When painting the case, a special powder paint is used, which provides protection against mechanical damage.

The principle of operation - the convector with natural convection operates in an absolutely silent mode. The water circuit consists of a copper pipe with copper plates soldered onto it to increase heat transfer and even distribution of heat. Natural air convection is used.

Appearance.Heating of air masses of forced ventilation is carried out by means of natural convection. The body of the heater is mounted flush with the floor. Mohlenhoff water floor convector heaters are equipped with a decorative grille imitating natural stone, wood, bronze, brass.

Models with natural convection are connected to autonomous or central heating. To facilitate installation, height adjustment is provided.