Toilet monoblock: device, pros and cons, how to choose the right one

Selection Tips

Connection to a sewer pipe

This is the first thing you need to pay attention to when choosing a monolithic toilet bowl. The spigot located at the back of the monoblock can be positioned horizontally on the floor, vertically or at an angle of 45 degrees

Basically, for bathrooms in apartments, toilets are installed with a horizontal outlet or a corner outlet. Products with a vertical outlet are used when installed in private houses and in some Stalin-era buildings.

Connecting water to flush tank

In many models, when installing a tank, a lateral connection of the supply pipe is provided. All valves are located at the top of the tank, so until the tank is full, the sound of overflowing water in the drain system will be heard. In this regard, when choosing, it is better to stop at a monoblock with “silent” filling of the drain tank, since water enters them from below.

Bowl configuration and design

Cheaper models of monoliths can be represented by a device with a large slope or a dish-shaped device. If in the first case it will create a lot of splashes during use, then in the second case, such a product will not look very hygienic. And besides, specific odors can come from it.

Distinctive features of a rimless toilet bowl from conventional plumbing

The fundamental difference between a toilet bowl without a rim and classic modifications is the absence of a ceramic rim on the edges of the product. This feature makes it possible to ensure the almost absolute hygiene of such bowls and greatly simplifies the cleaning process.

In classic models, when the drain tank is triggered, water enters the gutter used as a guide. Through this channel, water can reach the front of the bowl and its sides. A serious disadvantage of this design is that even a strong water pressure cannot effectively clean the guide rim. This leads to the accumulation of dirt, the appearance of rusty streams, the formation of plaque and creates the necessary conditions for the active development of bacteria. In addition, the complex configuration of the profile greatly complicates the cleaning of the toilet.

Unlike classical modifications of plumbing, a rimless toilet bowl, the advantages and disadvantages of which are due to design features, is easy to sanitize and highly hygienic. At the first stage of creating a bowl without a rim, one of the main problems of the innovative design was the splashing of water when flushing. To eliminate this significant drawback, a special ceramic divider was developed.

The design of the divider ensures the division of the drain flow into three directions, two along the side surfaces and one along the back wall of the rimless bowl. Properly calculated cross-sections of the divider elements provide additional acceleration to water flows, which ensures not only reaching the front wall, but also effective cleaning of the entire surface of the ceramic toilet bowl.

Rimfree and TornadoFlush technologies can be used to prevent water splashing over the top. Both technologies completely eliminate overflow, despite the absence of a restrictive rim on the edge of the product.

This is interesting: Do-it-yourself summer water supply in the country: how to make HDPE pipes, diagram and installation, instructions

Materials for the manufacture of toilet bowls

In the production of toilet bowls, both time-tested, well-proven materials and new trends are used.

Some of them are used to create comfort and coziness in the home, others increase the prestige of public places, others are valued for their simplicity and convenience.

1. Faience is the most common and affordable type. It does not have any special advantages, but thanks to its simple manufacturing technology and affordable price, it has become the most purchased type of toilet bowl.
2. Porcelain is an old-timer in the plumbing market.It is one of the varieties of ceramics and an improved version of faience. Higher quality and more expensive, so porcelain is not a budget option.
3. Cast iron. Toilets made of this material are not very diverse. They are bulky and heavy, which makes them very difficult to install.
4. Steel. This species belongs to the middle price category. Steel toilets have not taken root well in residential buildings, but they are successfully used in public latrines.
5. Acrylic is one of the innovations in the world of plumbing. The production technology allows you to create many models of different colors. For their lightness and ease of installation, polymer toilets are chosen by summer residents.
6. The stone is used both natural and artificial, but in both cases, it is an expensive "pleasure". Stone models are durable and easy to handle.

Selection criteria

Future owners of monoblock sanitary equipment should be responsible for its acquisition.

Particular attention should be paid to the criteria listed below.

• Release type. It can be horizontal or vertical. The system must match the sewer outlet, otherwise there will be connection problems.
• Brand. Give preference to plumbing from well-known manufacturers - it is more reliable, given the relative novelty of the models.
• Maximum allowable load. This criterion depends on the weight category of users. Usually take into account the maximum weight.
• Model kit. Plus are: two flush modes and equipment with a microlift. These options are optional, but desirable, although you will have to pay extra for them.
• Before purchasing, it is necessary to check the compliance of the data sheet of the purchased model, the warranty period, the availability of installation and operating instructions.

A responsible buyer will without fail check the fittings, inspect the body of the toilet bowl, make sure that the seat with a microlift is working properly. The right approach to choosing plumbing will ensure its long and comfortable use.

The following video provides an overview of the TM Eva Gold monoblock toilet.

video card

If you are not going to play heavy games, you most likely do not need a powerful video card, and this is an expensive pleasure today. For normal home use (surfing, watching movies) and the office, built-in chips such as Intel HD Graphics are sufficient. If over time it may turn out that you made a mistake with the video card, choose a model with the ability to connect an external accelerator.

In all other cases, pay attention to a PC with a discrete graphics card, or at least a mid-range graphics accelerator (RX560 or GTX 1050).

Gamers already know which chip to give preference to - usually these are premium video adapters RX Vega64 or GTX 1070.

We can assume that PC models with GTX 1050 will be the best choice of monoblock for office, work, study. But even schoolchildren know that there is simply no place for a powerful graphics adapter in compact devices due to the need to use massive and dimensional cooling systems, so one should not expect very high performance of the graphics subsystem in monoblocks.

Pros and cons

Plumbing equipment from this series has both pluses and minuses. Among the main advantages are:

• stylish appearance;
• ergonomics;
• simplified care;
• priority equipment;
• wear resistance.

The acquisition of monoblock toilets, although it costs more than compact plumbing, the former look more interesting. They are often chosen by adherents of creativity, who do not mind the money for an exclusive. The original design is one of the main arguments in favor of buying a monoblock sanitary ware. It should also be noted that budget models are also presented in the collections of monoblock toilet bowls.

The monoblock toilet seat corresponds to the configuration of the bowl, the fastenings and connections are reliable, the connection nodes are hidden. For the functioning of monoblocks, the installation of an autonomous tank is not required. There is no need to purchase parts to connect it to the toilet.

Monoblock models are ergonomic and most convenient to use. For their manufacture, materials are used that are resistant to the appearance of sediment, do not accumulate pollution. Deposits are prevented by both the glazed coating and the special configuration of the device.

Another plus of monoblocks is related to their resistance to wear. They are made of durable sanitary faience.

Monoblocks economically consume water when flushing, while cleaning the bowl is of the highest quality.

The vast majority of monoblock devices are equipped with seats with mechanisms that smoothly raise and lower the lid. It is possible to choose a different seat model.

By eliminating impacts on the bowl, the service life of sanitary equipment is extended.

There are few disadvantages of such toilets, they consist in the following points:

• higher cost when compared with conventional and compact toilets;
• complex repair - in systems that are a single whole, it is usually impossible to change only one element, you need to purchase and install the entire unit or system.

Features of choice

To choose the right toilet-monolith, it is recommended to take into account such parameters as:

1. material for the manufacture of sanitary equipment;
2. connection method with sewerage and water supply system;
3. bowl shape, equipment dimensions, additional options;
4. manufacturer.

Variety of materials and their features

Monolithic toilet bowl can be made of the following materials:

• sanitary ware. The most common material, characterized by low cost and durability;
• sanitary porcelain. The material is characterized by increased wear resistance and higher cost;
• stainless steel. Strong and durable material. The main disadvantage is the high cost;

Monoblock toilet bowl made of stainless steel

plastic. Differs in ease, ease of installation, inertness to chemical deposits, but at the same time, a short service life. Plastic toilet bowls are most often installed in country houses or auxiliary rooms with low intensity of use.

Determining the connection method

The next important aspect that must be taken into account when choosing is the methods of connecting with sewerage and water supply.

Plumbing equipment can be connected to the sewer system:

• horizontal release - the most common option;
• vertical outlet - when the sewer is located in the floor;
• oblique outlet - connection at an angle of 45 is mainly used in Stalin-era houses.

Ways to connect to the sewer

In order not to change the sewer system in the house, it is recommended to select the toilet outlet according to the type of sewer inlet.

Connection to the water supply system can be:

side. This method is simple and reliable, but when collecting water, a lot of noise occurs;

Toilet with side connection

bottom. The bottom connection is less reliable, but completely silent.

Plumbing with a bottom connection to the water supply system

Shape, dimensions, additional options

When choosing equipment for the toilet room, it is also recommended to consider:

toilet shape. Modern manufacturers produce sanitary ware of various shapes, which allows you to choose the best solution for any design of the toilet room;
dimensions

It is important that the toilet is convenient to use for all family members;

Basic rules for determining the parameters of the toilet

additional functions: bidet, seat heating, microlift and so on, which provides more comfort when using.

Rating of popular manufacturers

Feedback from consumers of monolithic toilet bowls made it possible to compile the following rating of the most popular models:

1. The Italian company Laguraty is a leader among monoblock manufacturers. Plumbing, developed by Lagurati designers, is currently mainly manufactured in factories located in Italy or China, which leads to high quality at an affordable cost;
2. Chinese firm Arcus.The popular model Arcus 050, made in the Hi-Tech style, is notable for its low cost (13,000 rubles on average), original look and many additional features;
3. Russian company Melana. Plumbing is made of durable materials, fully adapted to Russian conditions and relatively inexpensive (about 15,000 rubles);
4. Chinese company Eva Gold. Plumbing is distinguished by its low cost (from 10,000 rubles), high quality, and functionality. See the video below for the benefits of Eva Gold monoblocks.

You can also pay attention to such brands as VitrA (Turkey), Olympia (Italy), Gustavsberg (Sweden), Roca (Spain)

With microlift

A monoblock toilet bowl equipped with a seat cover with a microlift is a very convenient plumbing fixture to use. The principle of operation of such a product is to automatically raise and lower the lid. This happens according to the method of finishing doors, only in this case the microlift system is more miniature. This purchase will be appreciated by both ladies and men.

The advantage of this innovation is that it is this device that prevents a strong and sharp impact of the lid on the rim of the toilet bowl. Thus, it protects the monoblock seat from mechanical damage and does not produce loud sounds when the lid is lowered.

Pros and cons

Monolithic toilet bowls are very popular nowadays and are found in many dwellings. These products are produced by many well-known brands, so consumers always have a chic choice of different models. Before you go to the store to buy the perfect monolithic toilet, you should understand all the pros and cons inherent in such plumbing fixtures. Let's take a look at the benefits.

• In terms of their configuration and configuration, these models of toilet bowls are as simple and clear as possible. The main ones are only 2 components - a tank and a bowl, which are a single whole. Due to the simplicity of the design for such products, consumers do not have to buy other necessary elements.
• A monolithic toilet usually has a simple and very convenient shape. Thanks to this feature, it will be comfortable for all households to use such a device. This applies even to cases where plumbing is operated by people with disabilities. Not every modern toilet model can boast of such qualities.
• Monoblock toilet bowls are characterized by durability. This is one of the most reliable, strong and wear-resistant products on the market today. These qualities are due to the fact that in the design of the toilets there are special sealing parts and gaskets that prevent leaks.
• Monoblock toilets are produced by many brands today. They are presented in a wide range, each consumer can choose for his home the best option of decent quality for an adequate price.
• In most cases, monolithic toilets are quite small, so they can be bought for small toilets where there is not a lot of free space. Such devices are considered a good alternative to modern suspended structures that can not be installed in every bathroom.
• Such plumbing is made from materials that are resistant to the formation of precipitation and mud accumulation. The glazed shell does not accumulate dirt and other elements.In care, such products are unpretentious and retain their visual appeal for many years.
• Most one-piece toilets are made with water savings in mind when using them. A full flush will be carried out using a minimum volume of liquid.
• Monoblock designs are distinguished by a long service life. Such a toilet bowl lasts up to 20 years or more. During this period, the owners do not have to constantly call plumbers or solve various problems associated with the operation of the device.

These plumbing devices have several disadvantages.

• The main disadvantage of monoblock Uniates is their high cost. Often, this factor makes buyers lean towards purchasing a different, more affordable model.
• There may be problems associated with the drainage system of the structure. Despite the fact that manufacturers assure that such shortcomings will not happen with their products, they can still happen even with the most expensive and high-quality models - no one is protected from such failures.
• It is unlikely that it will be possible to repair the tank fittings in such a design. Most likely, you will have to resort to replacing the drain assembly. That is why experts recommend immediately purchasing a spare kit in order to make sure that in a few years such parts will not be found on sale.

imported quality

One of the most sold options is the Laguraty monoblock toilet, designed by an Italian designer named Giovanni Lagurati. This sanitary ware is made from high quality faience.Fasteners and a seat cover equipped with a microlift function (that is, capable of smoothly lowering) always come with it. The volume of the tank can be from three to six liters. Drainage of water can be carried out in two modes - normal and economical. The design of the toilet bowl has an anti-splash function. The entire device is covered with a special wear-resistant enamel that can resist dirt sticking.

The entire line of Laguraty toilets is characterized by creativity and originality. It is noteworthy that the creator of such plumbing provided hotel options for toilet bowls for children, which differ not only in size, but also in their appearance. Children's models are characterized by very bright colors and design in the appropriate theme, where fairy-tale heroes, characters from animated films and exotic animals can appear.

Features of installing a monoblock

To fix a monolithic toilet bowl, it is necessary to do the following steps in stages:

1. First, level it in the right place and circle it with a pencil along the contour of the equipment, then make markings for fastening.
2. Move the device and drill holes with a puncher, install spacers.
3. Lubricate the bottom of the toilet bowl with silicone sealant. This is necessary to securely connect the device to the floor.
4. Install the product so that it coincides with the circled contour and holes with bushings.
5. Fix the monoblock to the floor with screws or screws. Cover the caps of the fasteners with special plugs.

In order to connect the sewer to the device, different types of adapters are used: a fan pipe, an eccentric or a corrugation.In this case, the last element is used most often due to its versatility and elasticity. One end of such a corrugation is put on the toilet pipe, and the other, with the corrugated part, is put on the sewer outlet channel.

Monoblock toilet bowl: reliability and comfort

Monoblock is a monolithic structure. In other words, the tank and the toilet bowl are one. Such models are made from a single piece of ceramics, so there are no joints and connections, which significantly increases the level of reliability of the device. Keeping such a product clean is not difficult, because its surface is even, without recesses and bends.

Installation of a monoblock is quite simple. The only complication is the significant weight of the structure.

It’s better to imagine what a monoblock toilet is, the following video will help you:

Advantages and disadvantages

There are several advantages of monoblocks compared to other types of toilet bowls:

• aesthetic side. The one-piece toilet looks rich and elegant. The absence of bolts that usually attach the tank to the bowl is also beneficial. In addition, you can find monoblocks in a variety of colors. There are even models painted or decorated with appliqués;
• Hygiene. A flat, even surface is easier to care for. No need to clean the dirt from the joints;
• Reliability. As most people who have used a monoblock note, the system works flawlessly. You can not be afraid to flood the neighbors;
• Durability. Monoblock toilet bowls last an incredibly long time, perfectly retaining their original appearance.

The main disadvantage of this design, based on customer reviews, is its price, which is slightly higher than for compact toilets. Some users are confused by the large weight and dimensions of monoblocks.

Monoblock toilet from Migliore

Popular Models

Consider several models of monoblock toilets that have earned positive reviews and are popular with buyers:

Photos of popular models of monoblock toilets

VitrA Zentrum 9012B003-7200

Gustavsberg Nordic 2300

Arcus 050

Formosa

Algorithm of actions during installation

Installing a toilet includes a series of sequential steps, namely:

• preparation of all components and tools necessary for work;
• selection of the most suitable installation site;
• markup with a mandatory performance check.

To work on installing a toilet bowl, it is necessary to prepare a puncher and drills, a set of wrenches, screwdrivers, screws and cap screws, corrugation and some other details.

The choice of the installation site of the equipment should take into account the location of the sewer and water pipes. Of course, it is definitely recommended to take into account your own preferences for the interior, convenience of location and others.

Before the final fixation of the equipment to the floor, it is necessary to connect a drain pipe to it and bring it to the sewer outlet. After that, it remains to align the upper point of the toilet according to the level and mark the fixation points and the contour of the base with a marker. After that, it is also recommended to carry out a preliminary check of the equipment's performance in order to eliminate possible unpleasant surprises. This operation requires connecting the corrugations, filling the tank and draining the water. If no flaws are found, then you can finally fix the toilet to the floor.

Flaws

Minimalism and modern production technology affect the cost of monoblock toilets. Based on this, the price is the main disadvantage.However, the minus pays off with a long-term operation, because manufacturers give a guarantee for a service life of about 15-20 years. The integrity of the design along with the advantage is also a disadvantage. It is not possible to replace the bowl or drain tank.

You will have to buy new fittings for a full replacement. Based on this, experts advise buying an additional set of internal elements at the acquisition stage. These recommendations did not come out of nowhere. In the event of unforeseen breakdowns, the necessary parts may simply not be on the market.

Monoblock toilets: description and selection

Monoblock toilet bowls began to appear on sale relatively recently, but are already in demand and are convenient and practical sanitary equipment. It is these products that began to replace conventional toilet bowls, since these designs are one-piece, more compact and reliable. Due to the fact that there are no connecting elements, the probability of leakage is reduced to 0. The process of installing each component and its regulation is carried out at the production stage, at the factory, and only after testing the product and revealing its full compliance with GOST standards, it goes on sale.

The integrity of the product makes it stronger and more reliable than analogues with a separate design

When choosing a toilet for yourself, you should listen to the advice of experts in order to correctly select the model that will suit you in all respects. You need to buy plumbing fixtures only with accompanying instructions, since recommendations for installation and operation from other products can cause an early breakdown and improper installation.

It is preferable to choose toilets that have a built-in water saving system.This can affect the cost, but it will fully justify itself over the years of operation and will significantly reduce water costs. In addition to the toilet with a monoblock, it is worth buying a similar washbasin, which will allow you to create a harmonious interior in the room.

The development of plumbing: toilets and the history of their improvement

Today, a toilet is a technical device designed for sanitary needs, which is equipped with a flush system (automatic or semi-automatic, depending on the model). The design that exists today has made all hygiene procedures as comfortable as possible, but this did not happen right away. The history of the development of toilet bowls has several centuries.

The toilet is a mandatory subject of human hygiene, it can be considered one of the main differences between modern civilization

The first toilet bowl, which was equipped with a flush tank, appeared at the end of the 16th century, and was installed in the apartments of Elizabeth 2 herself. the city simply did not exist.

The second attempt to introduce the use of toilets in everyday life occurred in 1738, when the first toilet with a flush valve system was invented.

After that, another important event for this industry happened - the invention of the water seal, which allowed to solve the problem with unpleasant odors.

The first device designed to dispense water for flushing was invented in Britain, and this is how most toilets function to this day. Over time, other useful additions appeared, for example, an anti-splash in the toilet. What it is, we found out much later, however, this development took root pretty quickly. The toilet became an integral part of any home only in the 20th century, so we can say that the path of development of this device was very long and difficult.

Innovation moves forward and toilet designs define their functionality, they become not only comfortable, but also incredibly aesthetic.

Pros and cons of a monolithic toilet

A monolithic toilet bowl has many positive aspects, due to which the demand for products is growing every day.

The most important advantage of monoblock toilet bowls is the absence of the possibility of leaks or leakage of the contents of the tank.

Advantages:

1. Products are simple in terms of configuration, since components such as a bowl and a tank are one piece and no additional connections are required.
2. The design has a convenient shape, thanks to which it is very pleasant to use the toilet bowl for all family members and even for those who have physical limitations.
3. Monoblock toilets are considered durable designs. In addition, they are one of the most reliable, since they do not have gaskets and seals, which means that leaks are completely excluded.
4. Just take care of them. Toilet bowls are made of a material that has a smooth surface and a monolithic shape. This eliminates cracks and corners, which means that dirt and harmful bacteria will not accumulate there.
5. A wide range of Camomile products allows you to choose designs according to your preference and the style of the bathroom.
6. Monolith toilets are compact in size and do not require too much space for installation. They are considered an alternative to conventional suspended structures.
7. Some models from this series of toilet bowls are supplied with water saving systems, through which its consumption is significantly reduced.
8. Ease of installation. Even an inexperienced person without special training will be able to cope with the installation.

There are also disadvantages that you should not forget about when choosing a toilet bowl for your home. The cost of monoblock toilet bowls is considered higher relative to similar designs. This is due to the fact that they are made using a special technology.

Experts recommend immediately purchasing a toilet bowl to purchase a spare internal system so that, if necessary, immediate repairs can be carried out.

Faience and porcelain

The most common and numerous are ceramic toilet bowls: these are porcelain and faience products. Both of these categories belong to the same group and have their own characteristics. So, a faience toilet bowl will cost less than a porcelain counterpart, while such toilet bowls will be approximately the same in strength.

But earthenware still remains fragile compared to porcelain, which, moreover, absorbs not only dirt, but also foreign odors much less. As for the service life, a faience toilet bowl is designed for an average of 35 years of operation, while a porcelain toilet bowl can last from 50 years or more.

Advantages and disadvantages

To begin with, it must be said that these products began to appear relatively recently.However, they immediately began to enjoy great popularity and demand among modern consumers.

It is thanks to this that this branch for the production of sanitary equipment began to actively develop, so now you can find a product of any color, for example, you can even buy a black monoblock toilet bowl.

Dimensions and technical dimensions of a monoblock product of a standard type

Advantages

First of all, it should be noted that such a design has a minimum number of slots and joints. Therefore, they are easy to clean and clean, especially if the work is done by hand.

Green design with angular shapes and large bowl

Special attention should be paid to the fact that all the internal structure of such equipment is supplied in the kit. There is no need to buy a separate flushing system, as the monobloc toilet fittings are perfectly matched to the specific type of construction.

The appearance of such products is quite attractive.

At the same time, it should be borne in mind that the dimensions of these systems are relatively small, and they fit perfectly into almost any interior. (See also Antisplash Toilet: Features.)

Some products of this type have the most bizarre shapes that will become a real decoration of a modern interior.

It is important to note that monoblock toilets with a microlift are very convenient when used by the elderly or the disabled. Given this feature, they are often installed in public buildings or special institutions.

Typically, these toilets have a small height, which is very convenient when used for different categories of people with physical disabilities and children.

Flaws

It is believed that the only drawback of such equipment is its cost. The fact is that the price of these products is quite high, which is associated with the specifics of production. However, given that the service life of such equipment sometimes exceeds 15-20 years, this is quite justified. (See also article Toilet cuff: peculiarities.)

The latest models of such toilets represent a collection of all the wishes of users and modern developments to significantly increase the level of comfort.

It is also necessary to mention the uniqueness of the internal structure of the structure. The fact is that if a breakdown occurs during the work, then it will be very difficult to replace a separate part. At the same time, the cost of a complete replacement can be quite high.

Most manufacturers, in order to compensate for the cost of manufacturing, create a kit with a washbasin and sell it only together.

Expert advice

When purchasing such a toilet, you need to make sure that the installation instructions correspond to the selected model. Very often, the delivery includes a general guide from a separate line. However, they may have certain differences.

Quite often, such supplies include a low bidet, which is essentially a low washbasin or a small bathtub.

Sometimes it is much easier to pay for the installation to a specialist than to do the installation yourself. The fact is that this may require a special tool and certain skills.

However, you should immediately check with the master whether he is engaged in the installation of this type of plumbing.
When choosing the internal device of the tank, you should pay attention to economical water supply systems.They significantly reduce its consumption and have a relatively low cost.

Most manufacturers try to complete their products with them.

Some products of this type are immediately equipped with a built-in bidet, which greatly expands their functions.

It should be noted that when purchasing such a toilet, you should immediately buy a washbasin of this type. The fact is that these models of products look very good together, but when combined with ordinary plumbing items, they characteristically stand out, which immediately catches the eye.

Such products look very good even in a small room and are perfect for any interior.