The choice and manufacture of a washbasin for a summer residence

How to make a garden washstand with your own hands

The simplest option, which can be successfully used under a canopy in the garden, as well as in a garage or at home, is quite easy to do on your own.

Washbasin from a 5-liter bottle

This option, based on a 5-liter bottle, as well as wire, an awl and candles, is perfect for hygiene procedures in field conditions:

• light a candle and heat the awl;
• make about ten holes in the lid, distributing them as evenly as possible;
• make a pair of parallel holes in the middle of the container with an awl and thread the wire;
• pour water to the middle and tighten the lid;
• turn the bottle over and hang it on a driven nail or branch.

Wooden washbasin Moidodyr

A washbasin with a cabinet takes pride of place in the range of sanitary and hygienic devices for equipping a suburban area. "Moidodirs" belong to the category of serious structures, and can be represented by various modifications. Such a stationary device is quite difficult to move, so it must be installed in a pre-prepared and carefully selected, permanent place.

For self-production, you need to use a cabinet, a sink and a tank with a tap for water. Wooden "Moydodyr" can have different dimensions. The dimensions of a square pedestal are 50x50 cm. The rectangular design is made with dimensions of 45x50 cm. The side parts, back and door are made of moisture-resistant plywood.

You can make a design from boards 2.5x15 cm. In vertical blanks, you need to make eyes for arranging spikes. They are performed using a milling cutter, cutting grooves 2.0 cm deep and 8.0 cm wide. Spikes are equipped on the end parts of horizontal blanks using a circular saw. The parts are assembled into a single structure, and securely fixed with galvanized self-tapping screws. Sheet plywood can be glued or fixed with small carnations.

A water tank is installed between the side walls in the upper part. The floor should be made of slats measuring 2.0x4.5 cm. At the final stage, a door with a handle is fixed, which will simplify the operation of Moidodyr. It is recommended to carefully sand the finished structure, paint, and then install the sink.If necessary, in such a design, instead of moisture-resistant plywood, PVC panels are used, thanks to which the outdoor washbasin can become not only a necessary plumbing fixture, but also a real decor element for a backyard or garden area.

Canister outdoor washbasin

A fairly convenient and practical portable washbasin can be made independently from a plastic canister. To make such a functional plumbing fixture, in addition to the container, you will need to prepare:

• tap for water supply;
• nuts for clamping;
• drive;
• a couple of rubber pads.

When arranging such a washbasin, it is required to provide for a high-quality drainage system, which will transfer wastewater to a cesspool. If it is not possible to equip a drainage system, then you can use a bucket to collect used water, or place the washbasin above the ground, sprinkled with a layer of gravel, which in this case acts as a drain and prevents the formation of puddles around the washbasin.

Do-it-yourself washbasin for giving: manufacturing principle

Both a washbasin with a water heater for summer cottages and a washbasin for summer cottages without heating water are made according to the same principle. As you understand, the difference between them lies in the presence or absence of a heating element. Both products consist of three parts, the manufacture of which will have to be taken care of in the process of resolving the issue, how to make a washbasin for a summer residence on your own?

Sink. Let's start with it, since, in general, it is not necessary to make it - it would be more correct to say that it is almost impossible to make it at home.It is better to purchase a sink or use an old one - you can use any that is available

Even a kitchen sink will do - mortise or overhead, it doesn’t matter. Just based on its type, you will have to make a cabinet for it.

Cabinet - in a simplified version, it can be called a small table or a large stool

The only condition for the manufacture of such a base for a sink is that at the same time it also serves as the basis for installing a storage tank. In most cases, the back of such a cabinet rises up to a height of up to 800mm from the level of the sink - in fact, it is a panel, apron or work wall. Whoever likes to call her more, call her that - the tank is attached behind her. If the appearance of the product is not particularly interesting, then you can attach it to the front - in this case, its installation will be a little easier. Such a cabinet can be made from a fairly wide range of materials - in most cases, either natural wood in all its diversity is used for it, or its sheet composite in the form of chipboard, OSB, plywood, and so on. In general, what is at hand can be worked with - by and large, the cabinet can even be assembled from drywall or laid out with bricks.

Water tank. Without it, neither a simple nor an electric washbasin for a summer residence can work. The ideal solution for a country washbasin would be a rectangular container - it is easiest to place it on a cabinet. In general, any tank is suitable - both metal and plastic. The main thing is that you understand how it will be mounted on the cabinet.By the way, mounting the container on the pedestal is by no means the only solution to this issue - by and large, the container (of a rather large volume) can also be installed in the attic of the house. With this approach to business, you can even make a full-fledged plumbing in the house. But back to the manufacture of the container. Everything is simple here - the finished tank will need to be equipped with at least one tap outlet and, as a maximum, make another threaded hole with a diameter of one and a half inches for mounting a heating element into it. The necessary pipes with internal threads will have to be welded into the container in the right places.

And the rest, as they say, is a matter of technology, and assembling a washbasin is not a difficult task. First you need to fix the sink on the cabinet, then install the tank, after screwing the tap into it and, if necessary, a heating element that can be freely purchased on the market (such elements are used in storage water heating tanks). And, of course, it will be necessary to correctly connect such a heater to the power supply network - it is better to ground it so that no one is accidentally shocked.

In principle, that's all - as mentioned above, a washbasin for a summer residence is a fairly simple product to make on your own

The only thing I would like to add is to pay some attention to aesthetic characteristics - they completely depend on your approach to business and your vision of this product. You should not think that it is impossible to collect something worthwhile from old and unnecessary things - here it is just the opposite.The use of old things and objects is a guarantee of uniqueness, I'm not afraid to say again that it all depends on your diligence

Do not be too lazy to update the same old boards (for example, using a grinder and a special circle) and get a pretty decent and pretty product

The use of old things and objects is a guarantee of uniqueness, I'm not afraid to say again that it all depends on your diligence. Do not be too lazy to update the same old boards (for example, using a grinder and a special circle) and you will get a quite decent and pretty product.

Washbasin production sequence

You can buy a ready-made washbasin for a summer residence, but it is quite feasible for a man to make it with his own hands. And what is made by one's own hands is beneficial because it is made at one's own discretion, according to the selected parameters, correlating one's desires, needs and tastes. To make a washbasin well, you need to think through the entire manufacturing process:

• think over the size of the washbasin and the size of all its details: a tank for water and at the same time a mirror holder, bedside tables for a washbasin, the size of doors, various additional shelves;
• make a general drawing and for each individual part, thinking over allowances;
• choose the material for manufacturing: wooden boards, metal-plastic, stainless steel;
• cut a washbasin mirror from an old one or purchase a new one;
• purchase a tool for manufacturing: a saw, a jigsaw, a hammer, nails, universal glue;
• according to the drawing, make all the necessary details: a cabinet, a carrier for attaching a mirror and pouring water (a rectangular structure with a metal tank inside);
• attach the mirror in any way (put on glue or install in brackets);
• you can make an additional or buy a water heater in order to use warm water for your needs in cool times;
• in the absence of sewerage, the used water is poured into a bucket, which must be placed in a cabinet under the drain hole of the washbasin.

A dacha is a place where a person comes to relax, work, chat with friends. And how good it is when everything in it is thought out to the smallest detail, including the presence of a washbasin, an object from which the elementary purity of a person begins.

How to make a country washbasin yourself?

All of the above washbasins (hand basins) do not meet your requirements or available budget? A great way to design and make your own handmade vanity washbasin.

The cheapest and easiest way to make a country washbasin: make holes (one or more can be) in a plastic bottle and hang it on a pole, tree or fence. You can cut off the bottom of the bottle and regulate the water supply with a lid, or you can attach a valve that doses the amount of water being drained.

To such a simple washbasin, you can equip an old sink, build in a cabinet, and also adapt a tank to collect water. Voila, done! Option two will require a lot of effort and creative research.

Choosing a place for a country washbasin

First you need to determine the place for the future washbasin

The choice of place depends on whether you live in the country for several days in a row or come for the evening, it is also important to take into account seasonal or permanent residence. You also need to think about wastewater disposal: collect water in a tank and take it out manually or build a small septic tank, which we will discuss later

Design self-assembled country house washbasin

The place must be freely accessible. It would be better if you make a platform of crushed stone or water-permeable tiles in front of the washbasin, so that excessive dirt will not form.

The design of a self-assembled country washbasin

The material from which the sink is made should also be taken into account. Install the washbasin on the south side if you like warm water, or if you need to protect the basin from the sun, use natural shade.

The design of a self-assembled country washbasin

Determination of the design, purchase of materials or selection of improvised means

The place has been chosen, now we must select or buy the materials from which we will build our washbasin. Here the question is purely individual: a washbasin from a plastic bottle, which was mentioned above, is suitable for someone, or you need to purchase washbasin design elements suitable for this in a hardware store.

The design of a self-assembled country washbasin

So, you need: a water container, a connector (hose), a future “spout” (a device for dispensing or supplying water), a sink (plastic, metal or ceramic) any board or metal will do to make the body of the future washbasin.

The design of a self-assembled country washbasin

How to DIY

Often, summer residents save on buying a special washbasin for a summer residence and build a similar washstand with their own hands. By cutting off the bottom of a bottle with a capacity of two liters or more, you can get a homemade washbasin for a summer residence. To get a kind of cover, you can not cut off the bottom to the end.

The cap of the bottle will act as a faucet, in order for the water to flow, you need to slightly unscrew the cap, and to close the water, you need to twist the cap. This design is attached to any surface with a wire. In a country house where there is no house, such a home-made washbasin will fit perfectly and fit perfectly into the exterior of any courtyard.

Also, for giving with your own hands, you can make a washbasin from a bucket. For these purposes, you can use not only a plastic, but also a metal bucket equipped with a lid. This detail is necessary so that debris does not fall into the water.

At the bottom of the bucket, a hole for the faucet is drilled in any convenient place, the sanitary shackle crashes into the bucket and a faucet is attached to it.

If desired, you can install the oldest, simplest sink under such a tank, as well as a bucket for collecting dirty water.

They are not afraid to be left unattended in an uninhabited dacha, because it is unlikely that anyone will need to steal them, unlike new purchased washbasins.

A beautifully designed bathroom is extremely important and necessary. After all, where, if not here, everything should be as beautiful and neat as possible. In the bathroom, most people relax, rest, basking in the foam of pleasure and warmth.

Today we will not talk about the bath itself, but about its important component. And to be more precise, about the washbasin. Gone are the days when it was just an element for washing hands. According to modern renovation trends, this element of the bathroom is usually designed very elegantly, beautifully and thoughtfully.

In the bathroom, most people relax, rest, basking in the foam of pleasure and warmth.

Today we will not talk about the bath itself, but about its important component. And to be more precise, about the washbasin

Gone are the days when it was just an element for washing hands. According to modern renovation trends, this element of the bathroom is usually designed very elegantly, beautifully and thoughtfully.

Just about it further and will be discussed. It will be told not only about herself, but also how to make it with her own hands.

Ready-made options and their types

Why waste precious time creating something that has already been invented before us? It is enough to go to a specialized store and choose the model you like, and then just bring it to the country. Such a purchase should be to the taste of all lovers of summer holidays. Moreover, the range will certainly please even the most demanding customers.

Ready-made washbasin with heating

Types of country washbasins

Thanks to the wide selection provided by hardware stores, each summer resident will be able to choose the right option for himself.

Depending on the configuration and dimensions, washbasins are distinguished:

1. A practical washbasin with a cabinet or "Moydodyr" is a great option for installation directly in the house. Often such washbasins are equipped with a mirror, shelves for the necessary little things (soap, sponges for dishes). A convenient cabinet can be used both for storing things and, in the absence of a full-fledged sewerage system, for installing a bucket to collect used water. The initial price for washbasins with a cabinet starts from 2200 to 6 thousand rubles. It all depends on the size of the cabinet itself and the material of its manufacture.
2. A washbasin mounted on a rack like a street one - most often it is installed on a tubular frame of four legs. This is a very convenient device for washing hands on the street.It has smaller dimensions, which guarantees the convenience of its placement. Such a washstand with a heater can cost from 2 to 3 thousand, depending on the material from which it is made and the volume of the tank.
3. A hanging washbasin is the most budget model, but it requires additional purchases. If it is enough for you that the water flows just on the floor, then this is quite a convenient option for washing your hands. However, if you do not want to pour water on your feet, then you will have to adapt a separate basin or sink, and even make a water outlet. Such an electric version of the washbasin costs from 800 to 2 thousand rubles.

Material used for manufacturing

Each of the above types of washbasins can be equipped with parts of various materials:

• in any of the options, the water tank can be made of both thick plastic and stainless steel;
• the frame for the outdoor washbasin can be made of both stainless steel and metal;
• The washbasin cabinet also has a range of materials to use. This is laminated chipboard, plastic, sheet steel or stainless steel;
• The sink can be seen in both plastic and stainless steel.

Based on this, and your own taste, budget and desire, you choose the model that suits you. The more expensive the sink, the higher the quality and reliability of the design.

Water heating element for giving

The washbasin with heated water for giving has a fairly simple design:

• tank, with a heating power control mechanism and a shutdown button, or a self-shutdown sensor;
• and the water heater itself, most often represented by a heating element (such as in all electrical appliances for heating water).

heating tank

Such washbasins with a heater are a practical solution for a summer cottage or even for arranging a garden plot in the yard of your house. Indeed, due to the lack of direct access to the central water supply, and especially the lack of warm water, there is discomfort, because somewhere you need to wash your hands. Then buying a water heater is the solution to all problems.

Thanks to the built-in heater, you can heat water in minutes, and if there is a thermostat there, it will remain warm for a long time.

Such heaters can be either made of thick plastic or stainless steel, as there is constant contact with water.

The price for the simplest models starts from 1400 rubles. It all depends on the volume of the tank, the type of body, the material of its manufacture, the presence of a regulator in it that keeps the water warm.

Washbasin from a bottle and a syringe

An even simpler option is to create a homemade washbasin from an ordinary plastic bottle.

Step 1. First of all, you need to unscrew the cap from the bottle and cut a hole in it of the same diameter as the syringe taken. A 2.5cc syringe is ideal.

Cut a hole in the cap for the syringe

Step 2. Next, you need to cut off the nose of the syringe, on which the needle is put on. Moreover, not only the nose itself must be removed, but the entire upper part.

The syringe tip must be cut off.

Step 3. Then the syringe must be inserted into the hole in the bottle cap

It is important that the syringe barely enters the hole, otherwise it will have to be greased with sealant to prevent water leaks.

The syringe is inserted into the hole

Step 4. The cap with the syringe can be screwed back onto the bottle. The bottom of the container needs to be cut off so that it can be filled with water.

The cap is screwed onto the bottle.

Step 5. Now the washbasin can be installed and used. To shut off the water, the syringe plunger must be pulled out.

Syringe plunger pulled out

And in this position of the piston, the washbasin can be used

Variety of heated washstands

There are several models of country washbasins with heating such as moidodyr:

• with a sink and cabinet - such washstands look very aesthetically pleasing, and it is very convenient to use them. As a rule, they are equipped with shelves and hooks for placing funds and towels, often even a mirror. The drain container is hidden in the cabinet under the sink. The cistern and sink can be made of stainless steel or plastic;
• on the stand - a convenient portable option allows you to install the device anywhere in the suburban area. It is not necessary to place a container under such a washbasin to drain the liquid; you can choose a place where water will soak into the ground without causing damage to buildings and garden beds;
• wall-mounted - a heated attachment for giving is very light and has a simple design without a pedestal. An electric washstand is attached to the wall, and a container is placed below to collect water. It can be installed both in the house and in the garden or even on the fence, as there is a reliable bracket on the back of the tank.

Many prudent summer residents choose the first model because of the convenience of the design. The washstand is easily dismantled if transfer is needed. The inner surface of the tank is covered with an anti-corrosion compound, which prolongs its service life. Caring for such a washbasin is very simple - the surface is easy to clean, not afraid of mechanical damage.Plastic options can be made in a variety of colors.

In addition, a bulk water heater with a heater can be classified according to the method of heating:

1. An electric appliance for a summer residence is most optimal. Such a water heater does not need a gas supply to the site, it is not required to buy fuel. You just need to fill the container with water and plug it into an electrical outlet.
2. Gas modifications are more economical, but they need a fixed connection to gas supply and ventilation. At the same time, the installation of gas equipment is carried out only by a specialist of a company that has a permit to carry out work of this kind.
3. In solid fuel products, heat is generated; water is heated by burning wood, coal or pellets. These units are bulky, and due to the presence of a firebox, they require the removal of flue gases during installation and compliance with safety rules during operation.

Less popular are bulk water heaters powered by solar energy and liquid fuel modifications.

The simplest washbasin for a summer residence can be made with your own hands from improvised materials at minimal cost. For this purpose, you can use:

• Plastic bottles and containers of various sizes with all kinds of water supply regulators;
• Tin buckets, tanks, kettles, etc.

Consider a specific example of making a washbasin from a plastic bottle:

• We take an empty plastic bottle with a volume of 2 liters;
• We cut off the bottom, not completely, so that you can close the water tank from above;
• We make a hole in the cork;

We screw a rather long bolt into it so that it is held by a hat in the lid and can freely rise and fall;
We screw a nut onto the free end of the bolt for the convenience of using the washbasin and preventing the bolt from falling into the water tank;
Now it remains to hang the homemade washstand where it will be more convenient for you. You can use the wire by tying the bottle around it.

With the help of a plastic bottle, you can organize drip irrigation of plants. You can read about how to make such a system with your own hands in

here

And in this article, read about decorative fences for flower beds.

. A street washstand is a thing in any summer cottage or in a cottage. Yes, and it is not difficult to choose it at all.

As for the design, it is best to give preference to a washbasin with a bedside table and a heater - it is much more convenient. Although, if you are in the country only in the summer, it is quite possible to get by with a simple hanging washbasin or make its budget version with your own hands.

Washbasin for giving: types and their features

If you look at the country washbasin globally, then all country-type products can be divided into two main varieties - an outdoor washbasin and a similar product designed for installation in a country house. The difference between these two varieties is quite significant and cannot be ignored when choosing. Let's take a closer look at the differences between these two country washbasins.

1. Outdoor washbasins for summer cottages. In most cases, this is a container in the form of a tank, from which the liquid flows by gravity - you simply press a special valve and a certain portion of water falls into your hands.Such a washbasin can be used both in tandem with a sink, and without it. The main advantage of such devices for washing is their mobility - they can not only be easily transferred from place to place, but generally installed on any vertical surface. A wall, houses, a fence, and even a tree trunk - the water is drained from such a washbasin directly into the ground. Such containers can be made from both plastic and metal - their design can be called primitive and it is quite easy to reproduce it at home, as they say, from improvised materials. You simply hang an ordinary plastic bottle on the same tree, after cutting off its bottom, fill it with water and use it for your pleasure - a cap is used as a tap or valve in this design. By unscrewing it more or less, you can control the amount of water pouring out of the bottle.

2. Wash basin for the house for a summer residence. This is a more complex product, which in all respects resembles a washbasin for an apartment - the difference between them lies only in the ability to work without running water and sewerage. The Moidodyr washbasin for giving has a rather complex design - it is a full-fledged cabinet, on which a sink and a storage water tank with a tap are placed. In the same cabinet, under the sink, a bucket is installed to collect polluted water - it is in this bucket that the disadvantage of such a country washbasin lies. You need to constantly monitor its filling and manage to empty it in time.The presence of a container of impressive size (usually about 10 liters) allows you to install a heating element in it - a washbasin with heated water for a summer residence is the best solution in choosing these products. The only “but” is that the operation of such a washbasin requires the presence of electricity: if it is absent, then such a function in the washbasin will simply be useless.

You can see how to make a practical and convenient washbasin for giving with your own hands in this video.

Both types of country washbasin are quite simple to make with your own hands. The most important thing here is to choose the right materials. Well, we'll talk about the assembly of such a device further.

materials

Wood is a natural material. Like all life on the planet, it is associated with water. From the growth of a seed to the processing of wood, water is always present somewhere nearby. In the old days, ships were built from wood, timber was rafted down rivers, some types of wood were processed by soaking or flooding. For example, oak acquires special strength after prolonged soaking, so the myth that wood cannot be combined with water does not stand up to the test of facts.

Oak

One of the most durable types of wood, which acquires additional strength from water. It was from it that the first water pipes were made in medieval Europe. Oak has a wide range of shades, which allows you to choose the perfect option for every taste.

Teak

A valuable material that has a high rubber content. Thanks to this property, teak sinks have additional water-repellent properties. Oily substances in this wood prevent the formation of fungus and mold.Under the influence of water, the wood does not darken over time, retaining its original shade.

Bamboo

Durable material with a wide color spectrum from the lightest to the deepest dark shades. Bamboo is somewhat cheaper than oak and teak, as it does not fully fall under the definition of "wood".

hardwood

The most economical option, since the products made from them are not so refined and durable. However, maple, birch, acacia or walnut wood can be processed perfectly, takes any shape, and under the influence of special compounds becomes quite strong. In production, the method of pressing and gluing small particles of wood, impregnating with wax and oils, and laminating is used. But the product can also be made from a solid array with subsequent processing and impregnation.