Corner sinks in the bathroom: overview + installation instructions

Installation of a corner sink on a pedestal

It is better if the bowl and the pedestal on which it will be installed form a single set.

When choosing a model, pay attention to the presence of a special overflow hole. This will allow excess water to drain into the sewer. Otherwise, it may end up on the floor and flood the neighbors from below. To perform installation work, we need the following tools and materials:

To perform installation work, we need the following tools and materials:

• the washbasin itself with a pedestal;
• water level;
• pencil;
• load-bearing frame, if required;
• perforator or drill;
• adhesive that ensures the strength of the connection;
• dowels;
• self-tapping screws;
• cement mortar;
• graduation element;
• outlet pipe;
• mesh with screw and gasket;
• mixer and siphon;
• flexible eyeliner;
• sealant.

Even in the process of choosing a suitable model in the store, you need to install the washbasin bowl on the leg and make sure that they fully match each other.

So, let's start the installation work.

• On the upper level of the edge of the sink, you need to draw a line with a pencil, taking into account the seams of the tiles. This is how the corner sink attachment points are marked for its precise installation.
• The accuracy of the completed lines should be checked using a water level.
• Insert the bowl into the pedestal and lean the washbasin against the wall. The line drawn with a pencil and the top edge of the product must exactly match each other.
• Special holes should be located on the back surface of the structure. Through them with a pencil, you should mark the attachment points. Attach the equipment to the wall only if you are sure that the wall will support the weight of the structure. If there is no such confidence, it is better to use a special supporting frame.
• Make holes in the wall with a puncher or drill in the places where the fasteners will be located. The diameter of these holes should be smaller than the size of the dowels that will be located in them.
• To make the fastening as reliable as possible, pour special glue into the holes.
• Wait until the glue dries completely, and only after that drive the expansion dowels into them.
• The pedestal under the bowl should not stagger, so the base on which it will be installed must be flat. This can be achieved with cement mortar.
• Screw self-tapping screws into the mounting holes.The bowl of the washbasin is hung on them and at the same time placed on the leg. Make sure the drain hole is in the center. Do not overtighten the nuts so that the sink does not crack.
• Attach the outlet element to the sink, and install the mesh with the screw and gasket in the drain hole.
• When installing the outlet, gaskets are mounted, which should fit snugly around the drain. After tightening the screw, connect the siphon to the outlet.
• Securely fasten the outlet pipe in the sewer socket.
• The mixer is mounted with flexible wiring, which is connected to the water supply.
• Seal the seam between the wall and the wash basin with a quality sealant.

The whole installation process is not that complicated. You just need to do it slowly and consistently. Guided by the same basic principles, you can install corner bathroom sinks with a cabinet, as well as other models.

With such plumbing, your bathroom will become cozier and more spacious!

Bathroom sink height

In addition to choosing the size, you will also have to decide at what height to install the washbasin. According to the recommendations of SNiP, the installation height of the washstand is 75-85 cm from the floor. But these standards were written more than twenty years ago. They are calculated under the average height. It's no secret that the previous generation was lower. And significantly lower, according to statistics.

Growth has become higher, but the installation height of the washbasin has not changed

So the recommended parameters have become too inconvenient. If washing hands is still convenient, then you have to bend too low to wash. In narrow rooms, tall people have to demonstrate almost acrobatic stunts.

How to choose the height of the sink

If state institutions are obliged to comply with the regulations, then in private houses and apartments you can choose the height of the sink that is convenient. How is it defined? The upper edge of the washbasin should be approximately 10-15 cm below the elbow of a standing person.

Bathroom sink height If you follow the recommendations of SNiP on the installation height of the washbasin, you will have to bend low

If the inhabitants of a house or apartment do not differ much in height, everything is clear. Even easier if only one person lives. In such cases, the height of the sink in the bathroom is determined simply. But what if the difference in height is large? We must look for a compromise. You can either choose the "average" value, or navigate by the majority. It should also be said that children and adolescents in the active phase of growth are not taken into account. They are growing fast, and bathroom renovations are clearly done more than once a year. To make it convenient to use, they make a bench-ladder.

With a large difference in height, you can install two sinks at different levels

But the elders of short stature cannot be driven up the stairs. Of course, it depends on the person, but some are not annoyed that they have to raise their hands to wash or wash them. It is more important for them not to bend over. This is really the problem. If an agreement cannot be reached, if possible, two sinks are made. This, by the way, is also a solution to the problem if several people are going to work at the same time, and there is only one bathroom.

When not to choose

Pedestal or tulip sinks and a washbasin cabinet will not allow you to choose the height of the washbasin. What height is the cabinet or pedestal, the washbasin will be located on that one. There are still at least some options with the curbstone. If the legs are adjustable, you can add a couple of centimeters.You can, of course, replace the legs with higher ones. But this is also only a few centimeters. True, they may also be enough to make it more convenient to wash.

Cabinets under the washbasin in the bathroom are not only on legs, but also hinged

There are, however, hanging cabinets for washbasins in the bathroom. They are fixed at an arbitrary height. So in this case, you can also raise or lower the level as you wish.

The pedestal will not allow you to choose the installation height

With tulip-type washbasins, there is no possibility at all to change the height. What height is the "leg", so it will be. But it is possible to choose the height of this "leg". True, our assortment is not so wide, but almost everything can be “made to order”. Yes, and you can order via the Internet and not only on domestic sites. You will be surprised (or not), but often buying in Europe and paying for shipping is cheaper than in a store.

What do you need to remember about sizing?

Conventionally, all shells can be divided into several main groups depending on the size:

• compact mini-sinks suitable for very small bathrooms or small toilets;
• sinks of standard sizes and configurations;
• combined models, which are a double washbasin, combined with a cabinet-stand, etc.
• models with non-standard design, made to order.

When choosing and placing a washbasin, three main parameters are taken into account:

• width;
• height;
• depth.

An overly large washbasin will take up too much space in the bathroom, but too small is not always acceptable.When using sinks with a shallow depth or width, splashes will scatter throughout the surrounding space; cleaning in such a bathroom will have to be done much more often.

Going to the store for new plumbing, you should arm yourself with a tape measure in order to clarify all the important dimensions of the washbasin on the spot. The data indicated by the seller in the product description, as practice shows, does not always correspond to reality. It doesn’t hurt to take a plan of your bathroom with you in order to immediately understand how much free space remains. This is a particularly good idea for owners of small bathrooms.

What is the optimal width?

The optimal width for a washbasin is considered to be 50-65 cm. A wider model usually only “eats up” the usable space of a medium-sized bathroom. For one person, such a large washbasin is not needed, but in a spacious room a large sink can solve some design problems. For very small bathrooms, very small washbasins are provided, only 30 cm wide.

They are rather intended for use in small bathrooms at offices; at home, such small washbasins are installed only in the most extreme cases. From a washbasin that is too narrow, as already noted, splashes will fly out. Given the width of the sink, it is also necessary to evaluate the dimensions of the installation area for the faucet.

Corner sinks, despite their small size, look very stylish and easy to use. It makes sense to put a hinged cabinet under such a sink

The decision to install a double sink deserves special attention. This is a perfectly acceptable option for large families in which several members are going to work / study at the same time.

The distance between the centers of both washbasins must not be less than 90 cm, otherwise it will be extremely inconvenient to use the double washbasin. By the way, the installation of faucets in such models is not always worth doing in the center of each washbasin. mixers can be placed side by side by turning the spouts at an angle of 90 degrees relative to each other, i.e. each of them will be at an angle of 45 degrees to the wall.

How to choose the depth of the washbasin?

The depth of the sink that is most convenient for proper use is 48-61 cm. When choosing the depth of your sink, you can focus on the length of the arm of the visitor to the bathroom. You just need to stretch your hand over the washbasin. If the opposite edge of the shell ends at the middle of the palm or at the fingertips, its depth can be considered optimal.

An important indicator is the depth of the washbasin bowl. The larger it is, the less water coming from the mixer will be sprayed. Very convenient in this regard are models like “tulip” or “semi-tulip”.

What should be the height?

This size for a bathroom sink is easier to adjust, especially if you choose a wall-hung model that can be mounted on the wall in a suitable place. The optimal washbasin height is considered to be 80-85 centimeters, but quite often buyers find that it is more convenient for them to use a sink located above or below this level. This moment is important if a model is chosen on a pedestal (already mentioned “tulip”) or on a pedestal.

It is almost impossible to adjust the height of the sink, which is installed on a pedestal, this parameter must be taken into account even before purchasing such a model.

Of course, the height of the washbasin, under which it is supposed to place the washing machine, may be greater than the dimensions of the device, but not less. It is believed that for men it is best to install the sink at a height of 94-102 cm, and for women the norm is slightly lower - 82-93 cm.

Interesting information about choosing the right bathroom sink is presented in the following video:

Dimensions of standard bathroom sinks

The regulation contains norms, the calculation of which takes into account that users have an average height (values ​​​​are indicated in cm):

Width. The recommended value varies between 50-65, which provides good functionality and comfort.
The depth of the bowl of the product (the distance from the side to the inner surface) can be 13.5–15, the maximum parameter eliminates possible splashes in the room.
The length is measured from the end of the model to the wall. Picked up within 44–61

It is important to consider how comfortable it will be for small children to use the mixer.
Height above the floor (to the top edge of the sink). Usually equals 85, but if the tenants are tall, a distance of 90-100 is allowed.

Rating TOP 5 best bath sinks

Given the large selection of sanitary ware in stores, we conducted a selection for quality and identified the best models:

• Cersanit TETA 40 UM-Te/1.
• RAVAK Avocado Comfort.
• Roca Diverta 327116.
• LAUFEN ILBAGNOALESSI ONE 811971.
• Roca Bol 327876.

Let's take a closer look at these models.

Cersanit TETA 40 UM-Te/1

from 1,500 to 3,000 rubles.

5th place 4.1/5

The first place in the rating is occupied by a model from a Polish manufacturer, made in an oval shape with several holes. The main material is sanitary ware, finished with glaze.The kit additionally includes several fasteners and a siphon.

The size	465x430x160 mm
The form	angular
Mounting	suspension
Bowl location	in the center

• does not allow the appearance of splashes;
• easy installation due to compact dimensions (46x43x15 cm);
• The manufacturer guarantees quality service for 10 years.

Washbasin Cersanit

RAVAK Avocado Comfort

from 10,000 to 14,500 rubles.

4th place 4.3/5

The unusual shape of the Czech sink was liked by most users due to its ergonomics. Supplied for sale in white cast marble. The basic equipment has a drain-overflow. Fastening is made in a wall in a suspended state.

The size	850x450x124 mm
The form	non-standard
Material	fake diamond
Mounting	suspension

• high resistance to mechanical damage and exposure to high temperatures;
• convenient use due to the presence of a special wing for the location of personal hygiene items;
• thanks to the built-in drain-overflow, independent installation does not take much time.

Sink RAVAK Avocado

Roca Diverta 327116

from 2,000 to 3,500 rubles.

3rd place 4.4/5

The presented model is produced by a company from Spain. It has a rectangular shape with two holes in the bowl: under the mixer and overflow. Made of sanitary faience in a modern style. Installation is made in a table-top.

Bowl location	central
The form	rectangular
Mounting	mortise
Dimensions	550x425x170 mm

• high-quality and smooth surface is able to withstand any weight;
• the user can handle the installation himself;
• stylish appearance due to the famous creator;
• long service life (10 years).

Sink Roca Diverta

LAUFEN ILBAGNOALESSI ONE 811971

from 30,000 to 40,000 rubles.

2nd place 4.8/5

The sink from the Swedish company is equipped with a combined type pedestal and a special hole for installing a mixer. The model is made of sanitary porcelain in a modern style. White color makes it versatile and can fit into any interior.

The size	635x525x200 mm
The weight	41 kg
Material	ceramics
The form	oval

• white color allows you to combine the model with any interior;
• securely fixed to the wall and floor;
• is resistant to high temperatures and chemical compositions;
• standard care;
• unusual appearance.

Sink LAUFEN

Roca Bol 327876

from 4,000 to 6,000 rubles.

1st place 4.9/5

The last place in the ranking is occupied by a round sink with an overflow hole and a mounting platform. Manufactured under the supervision and responsibility of the Spanish manufacturer. It has a popular hi-tech style. In appearance, it is a faience-type bowl with a glaze coating.

Dimensions	420x420x230 mm
Country of Origin	Spain
Material	ceramics
The form	round

• overflow hole;
• modern design;
• easy installation by fixing the corner to the tabletop;
• small weight (11 kg);
• the warranty is 10 years.

Washbasin Roca Bol

Varieties of bathroom sinks

Sinks are mainly divided among themselves according to the method of installation. As mentioned earlier, there are three types of these: built into furniture, on a pedestal or on a leg, suspended, which are attached to the wall.

Suspended most often used to save space. They visually enlarge the bathroom.However, when choosing this model, it is worth remembering the communications exposed to the outside. Another disadvantage of this design is the fragility due to fasteners. When fastened on both sides, it is easy to break the shell just by leaning on it.

The shell on the leg resembles a flower in shape. It looks pretty nice, but because of the presence of the legs, the place is not saved. That is, for a small bathroom, this option is not suitable.

The most suitable option even for a small bathroom is a built-in sink. It is installed together with a small pedestal.

Tips and options for choosing a sink for the area of ​​\u200b\u200bthe bathroom

In average apartments and houses, the problem of saving free space is most acute. How to choose a sink that will not clutter up an already small area? In this case it is necessary:

• firstly, decide on the place in the bathroom where the washbasin will be located (usually this is the place where the place of connection to the water and sewer networks is close);
• secondly, it is necessary to decide what approximate space the sink should occupy, this will be the starting point for determining the width, depth and height of the product;
• thirdly, choose the appropriate model in the store.

Many manufacturers of sanitary ware produce several standard lines of washbasins for bathrooms in various sizes. When buying plumbing in a store, you should take into account your own approximate indicators for the width, depth and height of the washbasins.

Private housing constructions and many modern apartments boast spacious bathrooms and toilets, so they provide a wider field for designers' imagination.

Benefits of choosing

More and more modern buyers are opting for rectangular sinks. After analyzing this situation, experts identified a number of advantages of this form:

• Harmony. The model in a strict geometric form is perfect for the kitchen. At the base of this location, there is a large concentration of squares, corners and rectangles. As a rule, these are household appliances and furniture: stools, microwave ovens, separate ovens, tables and much more.
• Decorative direction. Geometric shapes are at the heart of many modern decorative trends. A rectangular sink is ideal for a room decorated in a minimalist or high-tech style.

• Practicality. Due to the special shape, additional items can be placed on the edges of the sink, such as a soap dish, cups, cutlery, various coasters and much more. If the sink is located in the kitchen, then you can use its edges to display dishes or display vegetables and fruits.
• Mounting. A convenient form allows you to carry out the process of installing the sink with your own hands without the involvement of specialists. This will help save money. Straight and even edges greatly simplify the fixation of the product, as well as the assembly of the cabinet, if any.

• Devices. The flat surface allows you to attach hooks or other accessories to the sink. Multifunctionality attracts modern and active people.
• Price. The price is of great importance in the final choice of products. Most rectangular sinks are affordable for most customers. Exceptions are models made from valuable, natural materials.

Glass sinks

Glass sanitary wares are associated exclusively with expensive designer models.Although the technical data of these products are consistent with their cost.

A significant disadvantage of glass is the particular difficulty of maintenance. On its surface, the smallest droplets of water and traces of cleaning agents are clearly visible. This means that the sink will have to be regularly rubbed to a shine, otherwise it will lose its presentable appearance. And not everyone has the patience to do so.

Glass plumbing for residential premises is rarely purchased. You will hardly see it in apartments or country houses. But it is very popular in the design of interiors in hotels, cafes and restaurants.

How to choose?

When choosing a future washbasin, it is important to take into account certain factors that directly affect the durability and reliability of the design.

• You need to choose a model based on the parameters of the room. The height and width of the structure is calculated in advance. The washbasin should organically fit into the room: not take up much space, but also not be too small. Round sinks are considered the most compact, but they are not always convenient to use. A sink that is too deep will be uncomfortable for a tall person, and a shallow sink will cause water to splash when washing.
• When choosing a particular model, the material plays an important role. It must be strong, reliable, wear-resistant and durable.

When purchasing a sink, you need to carefully inspect it for chips and defects.

Particular attention should be paid to the places of draining and installation of the future mixer - they should not have any flaws.
It is advisable to purchase products from authorized dealers or directly from the manufacturer, in which case it is possible to purchase a product with a guarantee.
The cost of products is a strictly individual factor. But not always expensive models justify the money spent. It is better to choose products of a proven brand in the middle price category.

It is better to choose products of a proven brand in the middle price category.

How to choose?

Before purchasing a sink, it is worth analyzing useful recommendations to avoid disappointment after purchase:

the presence of an overflow type hole must be mandatory;
the style of the sink should be combined with the overall design idea;
the size of the plumbing is important, so be sure to take all the necessary measurements;
do not forget about the complete set - it is far from always being exhaustively complete;
specify by what means you can clean your favorite sink;
think over what will be placed above the washbasin, and what - under it;
whether it is important for you to hide communications.

Types of sinks

Bathroom sinks come in a variety of sizes. They can be classified according to several criteria. For example, according to the type of installation, products are suspended or cantilever, floor, mortise, desktop and solid. Each type has its own characteristics.

Console models are easy to install and use, practical, good for bathrooms of different sizes. Suspended varieties are mounted on brackets or dowels. They save space, but do not hide communication pipes. Console data is different. According to the type of execution, they can be straight and angular. Variants of the first type are used in spacious sanitary facilities.Corner type analogues are chosen for small bathrooms.

Floor-type options are considered as such conditionally, since they are also attached to the wall, but at the same time the pedestal is on the floor. Products find their buyer both with a pedestal and with a semi-pedestal. The pedestal shell options include a tulip. Bowls on the supporting leg hide plumbing. They are installed in bathrooms of different sizes. In addition to them, there are flat modifications of water lily shells with different designs on sale.

In some models, the sinks are part of the furniture. They can be mounted on a countertop, floor or hanging pedestal. Built-in sinks can have top and bottom mounting types. In fact, these are built-in and semi-embedded sinks with full or partial immersion in the countertop. Semi-recessed versions partially protrude beyond the edge of the supporting plane.

Modifications with the upper type of fastening rest against the table with the sides. Products with a lower fastening method are built into the worktop flush (recessed into the work panel). Furniture mortise structures are convenient due to the presence of storage systems for hygiene items.

Installation of desktop sinks is extremely simple and does not take much time. Overhead wash basins the bathroom is far from suitable for each type of countertops and cabinets. Despite the variety of shapes and design variability, they are demanding on the stability of the supports.

In addition, in the assortments of manufacturers there are modifications of the combined type, the so-called solid cast ones. These sinks are integrated into the worktop of the table. By the number of shells, they are single, double and triple. For bathrooms in city apartments, the first options are more often chosen. For spacious bathrooms - the second.

Models with a wing deserve special attention. These sinks come in left and right handed versions. The presence of an additional panel allows you to place the necessary hygiene items on it. In fact, these are cast-type options mounted on cantilever shelves, floor pedestals or high supports.

An additional element of the sinks can be towel holders. These modifications are optimally convenient, easy to install and maintain, and have an ultra-modern appearance.

Sinks differ in the way the mixer is attached. Depending on the model, the structures are monolithic or with ready-made holes for the installation of cranes. They can have different configurations and sizes.

Models with installation above the washing machine are equipped with a horizontal siphon, a corrugated outlet and fasteners. They are attached to the wall, using for arranging the wash areas of small bathrooms.

Types of cabinets for washbasins

There are three main types of cabinets:

• on legs;
• suspended;
• with plinth.

Let's take a closer look at each type.

on legs

These cabinets are classic. They can be installed anywhere you need. The presence of legs makes it easy to clean under the cabinet.

When buying, you need to pay special attention to the material of the legs. Stainless steel legs are the best.

Plastic legs are less durable and may warp or break over time.

It is also worth paying attention to whether there are special pads on the legs that prevent slipping and scratches on the floor.

This is especially important if the floor is tiled.

suspended

It is an alternative to pedestals. It differs only in that it does not rest on the floor, but is suspended from the wall.It is characterized by even greater convenience in cleaning the bathroom.

The main disadvantage of this solution is the complexity of installation. If the walls in the bathroom are not even enough, the installation of a suspended option is not possible. In addition, careful calculation of dimensions and careful marking of places for mounting fasteners is necessary. Mounting the mount also requires special skills.

However, the use of hanging cabinets in bathrooms is widespread due to their excellent aesthetic properties. The bathroom does not look cluttered, the cabinet seems to soar in the air.

with plinth

These models do not have legs. The curbstone is established directly on a floor. For this reason, you need to carefully consider the choice of material, which should not be afraid of moisture. Otherwise, this variety is similar to the cabinet with legs.

Separately, it should be noted that there are various types of cabinets for sale, designed for corner sinks.

Photos of all kinds of cabinets are presented quite widely.