How to make a convenient key holder yourself to clean up the hallway

How to make a key holder with your own hands?

For especially creative and intricate girls, there is an option not to purchase this product in fashion stores, but to make it with your own hands at home. To do this, you need quite a bit of material and some fasteners.

It is better to choose a dense material that will not tear or fray over time. It can be thick suede, denim or leather.For home-made, if your machine is not equipped with specialized mechanisms and needles, it is better to get by with jeans.

It is necessary to measure the length of your keys and, in accordance with the parameters obtained, cut out a product of any desired shape. The key holder can be square, rectangular, oval or even round. The easiest way to sew a rectangular zapashny housekeeper.

The width obtained during the measurement must be tripled so that there is room for the smell and the fastener.

In a specialized store, you can purchase fastening hooks and fasteners in the form of buttons, which will also come in handy during the manufacturing process.

To make a rectangular wraparound key holder, you need to make a pattern in duplicate, then fold them face to face and stitch three of the four sides, then turn them inside out to make a kind of pocket, and all the seams remain inside it.

Then, we bend the fourth side with the cut edges inward and sew along the very edge. The product will need to be ironed and stitched the remaining edges accordingly. To the fabric did not crumple and did not wrinkle, you can sew the product diagonally several times in different directions, creating a quilted effect.

Then, we sew on hooks and fasteners, make a clasp in the form of buttons or buttons, add decorative elements if desired and enjoy the housekeeper made with our own hands.

Do-it-yourself key holder: master class, photos of original models and best ideas

Many owners are interested in the issue of competent organization of storage systems within the living space.

And if everything is obvious with shoe racks, racks and wardrobes - they are sold in a wide range in specialized stores, then with solutions for storing small items and accessories, everything is not so simple.

The cost of such products is relatively high (up to several thousand rubles), but the housekeeper is made by hand in 1-2 hours. Why pay more?

Beauty and safety in one product

A key holder is a small product (mainly made of wood or other natural material), the appearance of which is determined by the author's imagination, but the functional component is reduced to storing keys, small accessories. Often, it is they who are lost most often at the owners.

A small fixture might be:

1. Pocket. In 90% of cases, this is a small wallet where the keys are stored. Its main purpose is to keep intact not only the "trifle", but also the screens of mobile phones, tablets and other gadgets. Many people prefer pocket models because of their practicality and compactness.
2. Wall. It is located on the wall at the entrance door, in the zone of direct access and review. These are not only the usual hooks, but also real works of decorative art made of plywood, solutions made using decoupage technology.
3. Door. It is hung on one of the doors of the locker in the hallway or corridor. If possible, you can use the usable space of the door.
4. Desktop. Mostly these are small boxes decorated with original patterns. The design is different, and special key rings are used to hang the keys.

It is not at all necessary that the wall key holder serves as a storage place for keys.It can be supplemented with a diary or tear-off notebook for notes. The arrangement of additional shelves will allow you to place shoe cream, a “shovel” or a brush for cleaning on them.

On sale is a wide range of products in the hallway. But such products do not differ in visual sophistication, and in fact often the design is a reflection of the wealth and versatility of the inner world of the owners of the house. From this point of view, it is more profitable to make a wall key holder yourself from improvised materials, especially if you have basic skills in working with tools.

Key holder in the form of a house with key rings

Before you make a housekeeper with your own hands, you should decide on the idea for this product. The best choice is a wooden model on the wall, due to ease of manufacture, wide design possibilities and optimal functionality. A striking example of this is a plywood house.

For its manufacture, it is necessary to prepare the following tools, materials and compositions:

• a piece of plywood measuring from 25x15 to 25x25 cm;
• stain;
• varnish.

The key holder in the form of a house, made by hand, suggests that the product is given the shape of a residential facility. And if the main part is decorated with decor or decoupage, then the key rings are given any desired shape (as an option - parents and children). You can find many figurines and objects on the Internet.

The manufacture of the key holder is carried out in the sequence presented below.

Plywood blank for the future house is processed at the ends. The corners must be rounded and the chamfer completely removed from the surface. We do it with sandpaper.

We apply a printed image to the surface (in our case, a house)

It is very important that the bottom edge of the picture matches the edge of the wood material.

The leaf with the image of the house is fixed (with push pins), and then circled, transferred to the surface (under the carbon paper).

Figures are transferred under key rings in the same way.

At the next stage, it is necessary to cut through the contour of the figures with a manual jigsaw.

At the lower end, the workpiece is cut by 3-5 mm (the key rings holding the keys should protrude slightly above the wooden structure).

To eliminate chips and roughness, the surface is ground. Small holes are made under the rings.

Decoupage is the best way to decorate the finished product. Alternatively, the pattern can be burned out with a wood burner.

The key holder is ready for use! All that remains is to screw it to the wall surface at the front door. Use it to your heart's content and don't lose your keys.

What is a keychain for?

The habit of hanging the keys on the key holder will help wean you from periodically searching your pockets and turning over drawers in the hallway in search of a loss.

There is a category of homeowners for whom it is extremely important that every item in their apartment or house has a strictly defined function, otherwise, in their opinion, it is useless. The need for a key holder in the house for such people is quite understandable, since its main function is very specific - to become a place to store keys

But, besides this, there are several more reasons why it is desirable to install a housekeeper in the room:

• The key holder can be used not only for storing keys, but also for all small but important things: smartphones, other gadgets, letters, glasses, and often even money.Since it is located, as a rule, at the exit from the house, everything small that the person who came with him falls on it. This allows you to get rid of the constant rush to find a smartphone or your favorite headphones. In addition, it is very convenient to store papers in the key holder that you need to take somewhere soon or just keep in sight: letters, small parcels, notes, plans for the day, notepads and more.
• The housekeeper is another reason to get creative and find yourself an almost universal hobby for a few days, and with grandiose plans and good imagination - weeks. After all, the key holder does not have to be a small metal circle or a plank with several hooks. It can take up much more space, performing several functions. The key holder can be made from any material, there are no restrictions on colors and shapes - there is full scope for artistic fantasies.

Very often, the housekeeper is combined with other interior items - clocks, shelves, mirrors, drawers.

At the same time, a do-it-yourself wall key holder has a number of undeniable advantages:

• the author's idea is completely original and unique, so it will be difficult to meet someone else with a similar product, which cannot be said about mass-produced products;
• when handmade, it is possible to take into account your wishes and interior design, so that the product will definitely please the eye;
• independent choice of materials allows you to prevent dissonance between the appearance of the wall and the key holder;
• creativity gives vent to emotions, ideas and wild imagination, which has a beneficial effect on the psychological state of a person.

DIY leather key holder

Making a unique leather key holder with your own hands is very simple, given a few nuances.

For wear resistance, it is important to choose the right material, and for the reliability of the design, it must be sewn correctly

Such a case will have an exclusive design, as well as meet your personal requirements as much as possible.

In addition, the housekeeper can be decorated in your own way and create a thing in a single copy, which no one else will have.

How to choose the right skin

Leather is selected based on its characteristics. The most reliable key holders are made from natural material, that is, genuine leather. It has good breathability, soft surface and increased durability.

Choose good leather for your key holder.

Due to this, the product tolerates temperature changes well and does not crack. Burnout in the sun is almost impossible if the material is really high quality. You can make your own housekeeper from any material.

A leather key holder with your own hands is a necessary and convenient accessory.

When choosing, you can pay attention to some of the most popular and durable. These include:

• Soft skin.
• Buffalo skin.
• Suede leather.
• Calf skin.

Stitching

A master class on creating a leather housekeeper with your own hands begins with the preparation of all the necessary materials.

Prepare materials for the key holder.

You will need: zipper (riveting), fabric for interior lining, main material, carabiner and accessories. The product is not difficult to sew. A self-made key holder, unlike a purchased one, will look interesting and exclusive.

Before work, all the necessary tools are prepared. They include: scissors, a ruler, a sewing machine (designed for leather).

Prepare the necessary tools for making a key holder.

Instructions for making and stitching:

1. A pattern in the shape of a square is made of leather.
2. The zipper is sewn on. Combines leather, zipper and lining. It is stitched along the entire length on both sides. The edge of the lining should protrude 1-1.5 centimeters.
3. The workpiece is turned inside out with the front side inward.
4. The clasp is detached along the edge on the front side.
5. The zipper is fastened, a line is made from each side of 2-2.5 centimeters.
6. A leash is made, then a clip is attached to it.
7. All sections are closed. The corners of the housekeeper are best done in a semicircle and folded into an envelope. Curved parts are sewn.
8. The key holder turns inside out.

Take all the materials you will need.

Types of housekeepers

All varieties of home key holders are wall-mounted, since it is quite convenient if they are located at eye level. This makes them much easier to use. Key holders can be wooden, metal, leather, plastic or glass.

The most common key holders are made of wood. These models are distinguished by environmental safety and originality. They can be made of valuable wood and decorated with intricate carvings. Made by hand, wooden key holders can look like real works of applied art.

Metal products are usually not intended for domestic use. They are most appropriate in schools, offices and various offices, i.e. in those places where there is a need to store a lot of keys.

Do you want to give your hallway a special charm? Stop your choice on a leather key holder. Its main difference is its small size.Therefore, owners of small hallways usually prefer to purchase such a model.

Photos of wall key holders clearly show that they are divided into open and closed. The closed key holder is a small cabinet with hooks for keys, and the open one looks like a shelf.

Today, manufacturers offer multifunctional key guards, the design of which may include a shelf for correspondence, a chalk board, etc. In addition to dividing by type of design, key storage products are divided depending on their purpose - into home and office.

In our country, wooden key holders are the most popular. They can be purchased ready-made in most souvenir shops or made by hand. It is possible to make a housekeeper with your own hands from pieces of a board, pieces of plywood or from branches.

Finished products delight the eye with an amazing variety of design solutions. Collage key holders decorated with appliqué look amazing.

Key holders with leather inserts look no less decorative. As an additional decoration, chrome-plated metal elements can be used for them. As a result, such products are distinguished by an elegant and stylish appearance.

What is better - open or closed key holder? The advantage of the first is ease of operation (no need to open anything in order to hang or remove the key). The advantages of the second are a more favorable appearance and the ability to disguise individual unaesthetic details of the hallway (meters, doorbell mounts, etc.). Therefore, when choosing such items, it is better to focus on your taste and interior style.

The keeper of the keys in the shape of a regular quadrangle with a glass door will add solidity to the setting. And the product, decorated using the decoupage technique, will always look great. It is sure to please all family members. The motifs of vintage or fairy tales can act as the subject of the picture.

Some housekeepers immediately stand out in the interior due to their brightness and beautiful appearance. Others are difficult to spot at first glance - they can hide in other details of the situation, i.e. be secret.

An example of the latter is the key holder built into the watch. This extraordinary design idea will appeal to all those who like to receive guests and those who prefer not to keep the keys in plain sight.

Making a key holder with your own hands

Before proceeding with the independent manufacture of a key holder, it is necessary to determine its location. The appearance of the key holder and the material for its manufacture are determined. Below will be considered options for making key holders with your own hands.

Key holder made of wood

To make a key holder wood with their own hands, you will need several accessories: sandpaper, jigsaw, needle files, varnish or paint, glue, nails or screws. First of all, you need to present the finished design. Then, having selected the source material, you should proceed to the processing of composite parts using the above tools.

After processing the component parts, they must be varnished or painted. For a more refined performance, you can use a metal brush to remove soft fibers in advance and develop a woody pattern. Another option is to process the wood with a soldering iron, which will bring contrast and color to the details.

Parts are assembled into a finished product using glue or connecting elements. Then hooks for keys are installed, and the key holder is mounted on the wall.

Key holders with additional elements

For many people, on the shelves of cabinets and walls, in addition to keys, various small things can be scattered - combs, hair ties, lighters, etc. To get rid of this mess, you can make a key holder with a small shelf, which is suitable for storing every little thing.

It is not difficult to build a wall-mounted wooden key holder with a shelf. The manufacturing process differs little from the above. The key difference is the presence of a shelf, which must be concisely entered into the key holder and carefully made with your own hands.

Another interesting option is a key holder with magnets for holding keys. The key holder is a shelf, to the bottom of which magnets are attached. The disadvantage of this design is that it can only be used for metal keys.

Plywood key holder

Unlike wood, plywood is a pre-processed material and does not require careful preparation. From plywood, you can make a variety of options for key holders. For example, take a couple of sheets of plywood, cut them into the desired shape.

Then, in one sheet at the bottom, carefully cut grooves of a characteristic shape. Figures sawn from the grooves can be used as key chains.

After that, a second one must be attached to this sheet from the back. The result is a key holder with grooves into which key chains are inserted.

Key holder without hooks

In order to place the keys, it is not at all necessary to have hooks. A system of holes sawn into a single piece of wood is implemented.

On the front side, special cuts are made. A figurine of any shape is broadcast on the keychain, the main thing is that it does not pass through the hole. The figurine is attached to the key chain with a rope that passes through the cuts into the hole. The finished housekeeper should be sanded and coated with varnish or paint.

Key holder from unnecessary things

If you have unnecessary musical instruments (guitar, violin), you can make a very beautiful housekeeper. You need to cut a hole of a special shape, and place the hooks inside the musical instrument.

If old panels from appliances are lying around at home, then you can also try to turn them into a housekeeper. The main thing is to approach wisely, carefully handle and fix the details.

A word about plywood

You have probably already noticed that key holders are made with extensive use of plywood. Lovers from it sometimes create truly masterpieces, at the top in fig.

Impressive results with little labor and skill are obtained by a two-layer technique, at the top right: a carved shaped overlay is glued onto the base and, possibly, reinforced from the inside with small self-tapping screws. It is enough to pre-sand the overlay with sandpaper No. 240-260, and lacquer the entire product.

Key holders and blanks for them from plywood

This, it must be said, is the rarest case in history when the development of industrial technologies contributed to the revival of a handicraft that had withered away: artistic sawing on plywood. At furniture factories, from sawing waste, they began to cut blank figures with a laser under computer control, with a laser, if necessary, apply strokes / contours to them, and put them on sale.The success was phenomenal, prices skyrocketed. It was then that lovers remembered how to make elegant little things from plywood at home:

• You can sketch to perfection and print an outline drawing on a computer and at home.
• In addition to carpentry electric jigsaws, manual ones for fine work have not disappeared.
• For artistic sawing, it is quite possible at home, with your own hands, to make a vibrating desktop electric jigsaw for a thin string file.
• A manual cut will go more accurately and its small irregularities will completely disappear if the contour drawn on the workpiece is drawn in advance with an electric burner on wood.
• With the same electric burner, you can apply strokes on plywood and draw contours no worse than with an industrial laser.
• To make an electric burner with your own hands, you need a 3-12 V or 0-30 V power supply for a current of up to 3 A and an old burnt soldering iron.

key key

For an example in fig. a drawing of a universal hanger for a hallway in the form of a key made of 15 mm plywood is shown. To make it, you do not need to be able to draw, and you do not need a computer: the entire contour is made of straight lines and arcs of circles. For use only as a key holder, all dimensions are proportionally reduced by 2-3 times, and the thickness of plywood is up to 6-8 mm. It is possible without calculations: we remove the comma everywhere in the numbers, we get the dimensions suitable for the key holder in mm.

Drawing of a hanger for keys and light clothes made of plywood

Key holder-key - not without intent. Able children are often capricious and freedom-loving. Valuable instructions and moralizing on the board of the housekeeper-organizer will only annoy them. And it’s cool to hang keys on a key, so they get used to order without coercion.

Models in different styles

In accordance with the style in which a particular product is made, it will have an appropriate appearance. But you should not pay much attention to familiar styles, unless, of course, you are an ardent fan of classics or retro.

Stylists advise you to pay attention to unusual, but very interesting styles, representing stunning, unusual and even bewitching products:

Japanese patchwork

This style is incredibly popular both in European and Western countries, and in Russia. Its main and characteristic feature is the creation of not a simple ornament and application, but a whole, as realistic as possible, picture.

In the manufacture of key holders in the style of Japanese patchwork, only soft materials are used that are easy to process. Linen, cotton and silk fabrics are the main materials used by Japanese craftsmen.

On products for keys made in this style, small houses are often depicted.

The choice of background material becomes an important detail, because this is how the time of day and the calendar period in the image are determined.

steampunk

This style can rightly be called incredible and unusual, its main idea is a combination of completely incompatible things and details. By its nature, this trend is even considered a futuristic retro or even sci-fi style.

A steampunk key holder will definitely have an unusual look. Products are made of dark or darkened material with scuffs and are decorated with a huge number of metal parts of various shapes.

Provence

Provence is a style consisting of the best traditions of French villages. Romanticism, lightness and softness are its main characteristics.Any products in this style are more suitable for girls than men.

Even housekeepers in Provence style are something extraordinarily feminine and delicate. They are made from materials of light shades and have the same unusual print depicting Parisian beauties or flowers, and bright colors are not used at all.

What kind of key holder to choose?

Today, a key holder is understood as miniature decorative items, and not just a flat, rough wardrobe, with which “housewives” decorate their interiors. They naturally differ in form, moreover, as a natural work of art, but hooks are screwed into each. By the way, this is not necessary, there are also original products. But this is the only part that you should buy at a hardware store if you want to do everything yourself.

What's interesting is how key holders have evolved over time. It all started with a simple board in a frame on the wall, apparently because the keys in ancient times were predominantly massive in size. It was easier to place them on a regular board, sometimes decorated with a colored background. By the way, the location of the keys could be horizontal, to create an effect, but they themselves were wall-mounted items by type of placement.

Over time, the place for the keys began to be replaced by universal devices, or mixed along with other necessary little things in the hallway drawers. In our opinion, this should not continue further, the wall key holder carries the sacred meaning and beauty of the interior aesthetics. And in this sense, those owners who retained the old traditions still preferred a more miniature version. The so-called housekeeper plate, with the same aluminum hooks, can be found even now.

Continuing the digression into history, I would like to draw attention to the choice of the owners of private houses, where there were charming outbuildings. The keys there were not small, so they used massive boards in frames with individual numbers

Such a housekeeper hung on the wall at the entrance to the kitchen from the yard. Often, massive keychains were stored on it.

All types of key holders described earlier are intended for open access. At the same time, in order to protect property from unauthorized entry into housing, lockers with secret locking devices are increasingly being used. This is almost a full-fledged safe, but with a lower degree of protection. However, it is precisely the key holders that decorate the premises for concierges, outwardly looking like solid and high-quality custom-made furniture.

Our craftsmen, who were born back in the USSR, had a good gift for adapting all the materials at hand, and then finding the most unexpected solutions. So, in one of the popular magazines of that time, a project of a housekeeper was published. This is a special case, since the “house” made on the basis of an old clock that failed, resembled the same key locker.

Its further modernization allowed enthusiasts to make housekeepers in a variety of versions and forms, decorated like paintings. We want to offer one of these master classes for making a key holder with our own hands for our readers.

Story

Key holders appeared quite a long time ago, almost simultaneously with the keys, the origin of which dates back to the beginning of the nineteenth century. Many historians consider ancient Egypt to be the country of origin of key holders, but this opinion is erroneous, since in fact the first key holder appeared in one of the European countries.

The need for a separate product designed to store keys arose with the advent of huge bundles among the nobles, which took up a lot of space and did not always fit in wallets and pockets.

Already in the twenties of the nineteenth century, young and adult people used convenient key holders with might and main. Among the fans of this practical and functional product was even Alexander Sergeevich Pushkin himself.

The first pocket models were made of genuine leather, as it was the most suitable, durable and practical material. The appearance of products from other materials occurred much later, when key holders became not just a functional detail, but also a stylish accessory.

The first key holders were equipped only with strings in the form of cotton or leather laces, and metal clasps, buttons and carabiners appeared later, over time and with the development of progress.

Modern options for key holders

In a modern interior, you can use a not quite standard approach to organizing key storage.

One of the simple, but not quite common, is to use connectors. They are mounted on the wall in the hallway, and key rings are made from plugs that fit them. To hang the key, just insert the plug into the socket. The idea is good for ease of implementation, but not every interior will be appropriate.

Key holder with plugs

A similar option can be made with electrical sockets and plugs in the form of key rings. Naturally, sockets perform only a decorative function.

It is important not to confuse with a regular working outlet

A half-cut tennis ball holds any objects inserted into it firmly.One notched tennis ball is enough to store one key, the key can be inserted directly into it.

If there are several keys, then several balls must be taken. They can be glued to a metal rod, attach hooks to the balls, you get a key holder in a kind of sports style.

Panels from different devices and devices also look unusual. It is desirable that they have sockets for plugs. The panel from the car radio, for example, will look organic in the corresponding interior. If there is a sufficient number of sockets, the keys can be hung using a keychain plug. Or fix hooks on the panel, stylized as handles and instrument switches.

You can use the fretboard of a guitar, other stringed instrument or its imitation as a basis for a housekeeper.

The simplest option in the form of a knot with hooks made of colored wire wound around it will properly perform its functions and decorate the interior, if you approach this issue creatively.

There are a lot of ways to make a housekeeper on your own, as well as materials for doing this work.

You can try wood and plywood, thick cardboard and thick wire, make a product yourself or decorate a finished item. The main thing is that the new key holder organically fit into the style of the room and properly perform its functions.

Decoupage housekeeper

You can show the class in the design of the key holder using the decoupage technique. Refuse undecorated surfaces and show guests an imitation of a painted surface. The base must be primed with a special substance, then apply glue and glue a paper napkin (decoupage card) with the necessary pattern.

The technique is very interesting, with its help you can update and give other specific characteristics to many surfaces. Its most important feature is that there is simply no limit to the imagination. And you can buy a decoupage card for decorating your housekeeper quite inexpensively. You can also use ordinary table napkins with a pattern for pasting.

Use different decoupage techniques for the housekeeper.

We process the surface with white paint, making the necessary background, tightly glue the pattern onto the dried surface, varnish it. This technique certainly has its own subtleties, if necessary, all the tips can be viewed in special videos on this topic.

How to make a wall key holder with your own hands

What is needed to make a wall key holder? To begin with, understand what you could make it from. It can be wood, plywood, or completely unexpected things, for example, an unnecessary children's designer or old cutlery. There are actually many options.

You can make your own housekeeper.

The main thing is to equip yourself with a place before starting work:

• well lit
• Preferably separate so that you are not disturbed during the process
• All kinds of tools should be in their places to exclude the possibility of injury

From plywood or wood

In order to make a wall key holder from do-it-yourself plywood you will need, first of all, the material itself - plywood. The huge advantage of this type of wood board is that it can be given any look using a jigsaw for this purpose.

Plywood is cheaper than wood, but less durable and strong.

But first of allOf course, you need a drawing that you transfer to a sheet of plywood using carbon paper.There is an option that you draw well, then you can apply the drawing directly to the material. Then we give the necessary shape with a jigsaw, make the surface smooth by sanding it with large, medium sandpaper and proceed to decorating at your discretion.

The electric jigsaw is universal, in great demand and is represented by a large number of models.

For many, the housekeeper carved in the shape of a house, with separately sawn human figures, which are key rings, is popular. Upon the arrival of loved ones home, the voids in the house are filled and you can see who is in the apartment and who is absent.

Key holder in the form of a house - a popular option

You can skip the other option. Find a suitable piece of wood, sand it where you want it to be smoothed, sand it down, and then either paint or clear coat it.

To hang the key holder on the walls you need to attach fasteners.

The key hook is simply screwed into the surface. Thus, you will get both a natural wall decoration and a useful item.

From improvised materials

The independent choice of materials for the key holder does not always bring successful ideas. Ask your loved ones, maybe they know about some things in your house that you have no idea about.

The wall key holder will not only become a permanent meeting place for all your keys, but also decorate the hallway.

Many make housekeepers with their own hands from a variety of improvised materials, while they look original, and, of course, are unique.

From a picture frame

An interesting do-it-yourself housekeeper will turn out from a frame from a picture or photograph. This will not be difficult to do, because you already have a structure frame.You can select different backgrounds (pictures, photographs and even embroidery) and arrange it in accordance with the design of your hallway.

A framed key holder is a good option.

Based on the idea of ​​the master, key holders can be screwed both on the inside and on the outside of the frame.

From a branch

Fashionable now ecological style can inspire you to design a key holder with a simple branch. We find the one that suits us, dry it well. We use stain, sandpaper if necessary, grind, drill to create holes, nails or purchased hooks.

The key holder from the branch will be unique.

Whether to varnish or decorate with drawings, it all depends on your desire.

Very important: treat the material to kill possible bacteria and insects

Leather

From leather, the design of wall key holders is made less often. But making a pocket leather key holder is quite simple.

A high-quality leather key holder is an elegant fashion accessory.

The execution order is as follows:

• We find a small piece of skin
• We make a pattern
• We fasten with a dense thread with a lining (if required) and a fastener
• We attach a carabiner on the inside for attaching keys
• You can decorate with decorative details, but this is not necessary.

A leather key holder with your own hands is a necessary and convenient accessory.

How to make a wall key holder with your own hands?

Let's move on to the most interesting. Buying furniture is nice, but making something with your own hands is beyond competition. Let's start with the easiest and cheapest way.

We need a box. The more original it is, the more effective the wall key holder will turn out. We attach elements to the back wall to fix the structure on the wall.It is enough to place loops that will be convenient to hang on self-tapping screws.

Plywood is a versatile material that can be used almost anywhere. If you have leftovers or pieces, then using a special tool, you can create a unique work of art.

What is needed for this do? Everything is very simple:

• draw the desired pattern on a sheet of plywood;
• find in your "bins" a manual jigsaw;
• carefully cut out the elements (if the surface is slightly damaged, use an electric wood burner);
• fasten all the elements and enjoy the result!

Making a wall key holder with your own hands

Finding keys is a common problem in many homes. It takes time, and sometimes costs a lot of nerves, especially if a person is late for a meeting. It was in order that the keys of all household members could be easily found and that the housekeepers once came up with. The choice of key holders in stores and in the vastness of the worldwide network is certainly very large.

When a housekeeper hangs in your hallway, there is more order at home.

But if you want something suitable for your family and your home, you can do this really important thing with your own hands.

A little of your imagination and unexpected ideas, improvised materials (or purchased) and your guests will definitely pay attention to this item in the hallway