Cabinet with a bathroom sink: which one is better to choose + how to install it correctly

Standard values

The size of the furniture in the bathroom is selected depending on the height of the sink and is limited by its lower rim. If you purchase a set of furniture (cabinet + overhead washbasin), then proceed from the general standards for plumbing.

Manufacturers produce products according to the instructions of SNiP. The standards provide for the following allowable ranges (we indicate them in cm):

• 80-85 are generally accepted options, they are also applied to shells;
• 86-102 - for men;
• 81-92 - for women.

The indicator, which is suitable for all residents, is in the range of 86-93.

When you violate the accepted values ​​\u200b\u200bduring the installation of equipment, this may impair the usability.
Built-in models, during installation of which the standards are not observed, will create problems for residents. They will have to bend low (more than 75º) if the size is below the norm, or reach for the sink when the size is exceeded.

Vanity unit in the bathroom: design and interior matching

A harmonious combination with walls, floors and faience affects the visual perception and completeness in the improvement of the room.

Particular attention should be paid to the color scheme, which ideally should have no more than three tones. Today, the whole palette is popular: from aggressive red-black to delicate pink, neutral beige and classic white.

When choosing the surface and structure of the material, it is important to consider the possibility of caring for it. Glossy furniture needs to be constantly rubbed, rough furniture needs to be cleaned.

The matte surface requires the least attention.

Unusual nightstand design in vintage style

The widest range of furniture models allows the modern consumer, taking into account individual requirements, simply buy a cabinet for a washbasin for a bath. For those people who love to craft and have certain tools and materials available, they can easily and quickly make bathroom furniture.

First of all, you should decide on the design of the future model, which depends on the selected washbasin. A built-in sink requires the manufacture of a countertop, a semi-recessed one requires fitting doors or walls. You can avoid the hassle by using an overhead washbasin.

A bedside table under the sink can be made using boards or slabs as a basis, that is, from scratch. Old furniture can serve as a good basis: cabinets, chests of drawers, tables. Floor-standing bathroom cabinets without a sink are the easiest option for home-made furniture. Any materials and spare parts from old structures will be used for manufacturing. The secret of simplicity is that you do not need to bother installing the sink.

Washbasin cabinet

Such a cabinet can be made using an old table-cabinet or chest of drawers as a basis. The process will not take long, and the converted furniture will still have plenty of storage space.

Before you get started, you should remember the ideal dimensions of the cabinet. In particular, its height should be from 85 to 95 cm. If the old furniture had legs, then with their help it is easy to adjust the required height. Or vice versa, attach coasters if the chest of drawers is lower than necessary.

Compact hanging vanity unit

With your own hands, it is easy to invent a convenient cabinet under the sink in the bathroom using an old table-cabinet. Two doors will hide all the pipes, and in the middle there will be a lot of space for storing care products, towels and household chemicals.

Cabinet from an old chest of drawers

A chest of drawers will give your bathroom a vintage and sophisticated look. It should be noted that the drawers will have to be shortened.

Below are the stages of reincarnation of old furniture:

1. Drawing the contours of the sink, which will be built into the chest of drawers.
2. Cutting a hole for a washbasin.
3. Measuring and marking holes on the back wall.
4. Cutting the back of the chest of drawers for pipes.
5. Adjusting drawers to dimensions that allow for the location of the sink and pipes.
6. Rear wall fixing.
7. Built-in washbasin, water supply and sewerage connection.

Cabinet made from an old chest of drawers

DIY bathroom sink cabinet made of marine plywood

With a couple of sheets of marine plywood, a few sheds and a couple of handles available, you can easily make a bathroom cabinet with your own hands using step-by-step instructions.

The manufacturing steps are as follows:

1. Designing a structure using, for example, the SketchUp program.
2. Transferring the drawing to the plates.
3. Using a jigsaw, parts are cut to size.
4. Parts are glued together with liquid nails or wood glue. For reliability, they are reinforced with corners.
5. With the help of brackets, the cabinet is attached to the wall.
6. A hole is cut in the countertop for the sink.
7. A washbasin is inserted, plumbing and sewerage are connected.

The laconic design of the cabinet is the highlight of this interior.

Home-made designs of cabinets are tough not only for an experienced carpenter. True, manufacturing will require the availability of materials, tools and patience. The main thing is to follow the dimensions and sequence indicated in the drawing. The result is a unique and multifunctional cabinet, and with it - a lot of compliments to the master.

Thus, the cabinet under the sink is an important and convenient piece of furniture in the bathroom. The right choice depends on the taste, the desired configuration of the model, the area of ​​​​the room, the design style.

Particular attention is paid to the material of the cabinet and the dimensions of the structure. You can make a bedside table under the sink yourself, having an old chest of drawers on hand or following the step-by-step instructions

The main purpose of any model is the benefit and functionality.

Installation

Installation of a cabinet with a built-in sink consists of several stages.To successfully pass all these stages, you need to follow some rules.

Choice of accommodation

Usually a new sink is installed in place of the old one. In this case, you do not need to puzzle over how to conduct water supply and sewerage. If you want to install a cabinet in a new place, you will have to solve this problem. In addition, the furniture itself should fit comfortably there, and its cabinets should open and close freely. If you are going to buy a wall-mounted vanity unit, make sure the wall is strong.

Making calculations and markups

Making calculations and markings makes it possible to carry out pipes exactly, without prejudice to the pedestal itself. Fittings, that is, the connecting parts of pipelines, must be above the middle shelf. Incorrect measurement can lead to the fact that they will rest against walls and furniture shelves. This also applies to the sewerage system. For a drain pipe that comes out of the floor, you will have to drill a hole in the bottom and shelves of the cabinet. Then the corrugated hose will stretch from the bottom to the top. Therefore, it is better to accurately measure everything in advance and pass all the pipes through the wall.

Purchasing materials and preparing the necessary tools

During the installation process, you will definitely need:

• wrench;
• FUM tape;
• screwdrivers of different sizes;
• screwdriver;
• mixer;
• siphon;
• corrugated plastic hoses.

If you purchased the furniture unassembled, you will first need to assemble it with a screwdriver. The accompanying instructions will help you with this. furniture assembly. During this procedure, make sure that each part is firmly connected to the other.Because after you install the sink on it, it will no longer be possible to tighten the screws harder.

Installing a cabinet with a sink

Having gone through the previous steps, and having successfully prepared all the necessary items and tools, you can begin the process of installing furniture with a sink:

• Turn off the water supply. Connect the faucet with hoses and attach the faucet to the sink. The best faucet option for a cabinet is a modern single-lever model.
• Use FUM tape (fluoroplastic sealing material) to seal the connecting parts.
• Install a siphon on the drain hole.
• Attach the sink to the surface of the cabinet.
• Move the assembled furniture to the place of installation. Do not install the sink cabinet close to the wall, as lack of ventilation can cause mold to grow. If you need to attach it to the wall, do it using special bolts. But before that, do the calculations and make marks.
• Move the pedestal away from the mounting location and drill at the marked points on the wall. Insert the dowels there, return the cabinet back and secure it with bolts.
• Connect the sewer pipe and the water supply system. This completes the installation process.

In the process of installing furniture with a washbasin, difficulties sometimes arise. For example, if the sewer hose prevents the furniture from fitting snugly against the wall, then it will be necessary to saw off part of the shelf, bottom or wall of the cabinet. To do this, use a hacksaw or jigsaw. Or, for example, the sink does not have holes for bolts to install it on the wall. In this case, you can stick it with silicone glue.

Shell testing

After completing the assembly and installation of the cabinet with a washbasin, check the performance of the entire structure. First check the reliability and stability of the cabinet, then turn on the water and check that there is no leak anywhere. If everything works properly, then you can safely hand over work or enjoy new furniture.

What to consider when choosing furniture?

When choosing a cabinet for your bathroom, you need to consider a number of important points. First of all, it is the height and width of the product. They must exactly match the dimensions of the bathroom so that the furniture does not “get lost” in a large room or look too bulky in a small one. The optimal width for the sink is 0.5-0.65 m. This will be quite enough to use plumbing and not splash water.

The hanging cabinet for the sink can be fixed at any height convenient for the user. The height of the floor options must be selected in order to use them comfortably.

However, for small spaces, such a bowl will be too large. It is desirable to install the so-called compact here, 0.3 m wide

It is worth paying attention to the site intended for the installation of the mixer, if you intend to put it here. Its dimensions must be sufficient for mounting the selected model.

Look at the depth of the bowl. The deeper it is, the less spray will fly out of it when used.

The height of the cabinet is also important. It is considered optimal to install the sink at a level of 0.8-0.85 m from the floor level. However, if those who will be using the equipment are shorter or taller than average, they may be uncomfortable. The hanging cabinet can be fixed at the desired level, furniture on legs or on a plinth has a fixed height.This must be taken into account when buying.

For more information on how to choose the best size bathroom sink, read on.

It is desirable that the filling of the cabinet under the sink into the bath is as functional as possible. It can be shelves of different heights. It is better to choose removable structures, since it is easier to care for them. You can always take it out, wash and dry. It's good if you can adjust the height of the shelves. This makes it easier to choose the best option for you. Roll-out shelves are ideal for corner cabinets, which are very convenient to use.

It is desirable that the cabinet under the sink be as spacious and convenient as possible for use. The number of shelves and their purpose is selected individually in each case.

For direct models, they are also used. It is necessary to decide for what purposes the internal space of the bedside table will be used and select fillings specifically for this

It is worth paying attention to the number of doors and their location.

It is important that they can open freely, without interfering with free movement around the room and without touching other furnishings and plumbing

If there is no room for free opening of the doors, perhaps the best option would be a cabinet with open shelves or drawers. The number of doors can also be different, but usually structures up to 0.4 m wide have one door, wider ones have two. Very attractive curbstones of original design. If you like just such a model, you should think it over well

It is very important that it is convenient to use, and it fits well into the overall design.

Having decided on the model, it remains to choose the color and control the quality of performance.When choosing furniture design, you need to consider the design of your bathroom. Everything should be designed in a common style and color scheme. The most beautiful cabinet, which does not fit into the design of the bathroom in terms of color or style, will stand out from the general context and will not decorate, but ruin the bathroom.

The cabinet under the sink can be made in various styles. This makes it easy to choose furniture for your interior.

Designers advise choosing light-colored furniture for bathrooms. It is much easier to care for than the dark one, since the streaks from soapy water are less noticeable on it. Regarding the quality of workmanship, it is worth considering not only the countertop, sink and cabinet, but also the fittings.

All fasteners must sit firmly and not wobble. When opening, a creak should not be heard. The best material for fittings is chrome-plated metal. Painted plastic will lose its original attractive appearance very quickly.

What is an overhead sink

Advantages and disadvantages

The overhead sink has a lot of pluses and only one conditional minus. Unfortunately, due to the lack of square meters, not every bathroom can accommodate such a washbasin. But if you really want to, you can find smaller copies of the compact type, in which the cabinet is represented by a small shelf attached to the wall structure. Such a model will allow you to place household items under the shelf, but will not solve the issue of sheltering water supply and sewerage.

Now let's talk about the benefits:

1. It does not matter whether the wall plane is reliable or not, because the overhead fixture is not mounted to the wall.This option is suitable for those who do not want to spoil the appearance of the finish in the bathroom or doubt the strength of the surface. The countertop washbasin goes well with a large mirror and looks like a single unit if you choose the right one.
2. If the overhead sink occupies its proper place on the countertop, all unsightly communications are located inside the cabinet. Designers offer to additionally decorate the front side of the countertop with a light, airy curtain to match the color of the finish or individual areas of the room.
3. An overhead sink allows the owner of an apartment (private house) to leave an order for the manufacture of his own cabinet, taking into account the style of the bathroom, its size and filling with furniture.
4. The top cover of the tabletop is suitable for decorating with candles, as well as for placing shampoos, towels and other frequently used bath accessories.

Technical features

Comfortable are the countertops offered for purchase complete with overhead sinks. Such a stand-cabinet is equipped by default with a mirror, a cabinet, and shelves and even lamps can be located in the upper part. What is the disadvantage of such units? They are quite bulky and are available only in several colors, which are not always appropriate for a particular room design. But in this case, there is a way out - to order a device of the desired size, configuration and shade.

There are several ways to fix the tabletop - with corners or by placing it on legs. The first method is carried out in parallel with the installation of the support, if the size of the countertop is more than 1–1.5 m. Another option for a heavy pedestal may be unreliable.What is commonly used as a support? A leg in the form of a tube made of metal is suitable, such are found in the design of the bar counter.

A countertop washbasin set can only include a countertop and legs or a body with side rails and lintels. The body is often made of wood or sheet metal. For reliability, it is sheathed with a protective layer of drywall or thick plywood.

Under a homemade device with an overhead sink, you can place a washing machine, for which there is always not enough free space. If the countertop is divided into 2 parts, one of which is open, the washbasin is located slightly to the side. It is easy to perceive a product that is not covered with doors, having shelves and curtains covering them. But still, it is desirable to hide communications by mounting the appropriate bar. There are also holders for towels and bathrobes.

An overhead sink with a cabinet finished with tiles, which covers the walls of the bathroom, looks interesting. A charming piquancy is added by a small mosaic and a special brick designed for cladding. It is more than profitable to use artificial stone - in this case, additional finishing is not required. As a rule, countertops for a false sink are made of acrylic stone and agglomerates, and chipboard or MDF acts as the base.

Classification of shell shapes

Choice sink shapes depends primarily on the style of the room. For example, classic design involves rounded, streamlined designs, conciseness and harmony in combining equipment, furniture and plumbing. Hi-tech, on the contrary, requires clear lines and angular geometry of outlines.

Overhead sinks - a very stylish solution for any interior

Round bowls look elegant, oval bowls are the easiest to use, rectangular and square bowls with rounded edges suit any style of bathroom. Triangular washbasins are considered fashionable - stable and comfortable products. Extraordinary people will love the bizarre shapes of bowls that take the form of a flower, cloud, blot or drop.

Leading Russian and foreign manufacturers of bathroom furniture, an overview of popular models

What do most people associate with the word "Germanic"? That's right, it's quality. German products are rightfully considered the most reliable, strong and durable. German bathroom furniture is no exception. Villeroy & Boch is by far the world's largest manufacturer of bathroom furniture and accessories. The company produces products of several brands. The model range is several tens of thousands of interior items. It is not difficult to guess that the price of the company's products is considerable.

Cersanit furniture and plumbing can be safely attributed to models popular among buyers. This is a joint production of Poland, Russia and Romania. More than 40,000 items of goods are manufactured at the company's factories

It is important to note that models from different collections can be combined without disturbing the harmony in the interior. Products are produced in white and shades that imitate various types of wood.

The company has its own research center, where the best models in terms of design and functionality are developed.

The Russian manufacturing company SanTorg produces bathroom furniture under the brand name Santa.The furniture of this company is in demand among buyers due to the good value for money. A wide range of models allows you to choose furniture for bathrooms for every taste.

The table provides the characteristics of the most popular standard and large-sized models of manufacturers, which we talked about.

Manufacturer / Model name	Dimensions W×H×D, cm	Body/facade material of the pedestal	Shell material	Average price (as of May 2018), rub.
Villeroy&Boch/Venticello	60,3×50,2×42	MDF/MDF	Ceramics	51700
Roca/Gap	60×60×42	MDF/MDF	Ceramics	20000
Cersanit/Melar	60,5×68×41,5	Chipboard/MDF	Ceramics	10800
Santa/Grace	60×80×43	Chipboard/MDF	Ceramics	3800
Cersanit/Stillo	80×40×45	Chipboard/MDF	Faience	17300
Villeroy&Boch/2Day2	80×58,1×47	MDF	Porcelain	72700
Roca/Victoria Nord Ice	80×55×45	Chipboard/MDF	Ceramics	17800

Installation steps

Product with shelves for storage

A manual with recommendations on the rules for fixing furniture contains almost every manufacturer's kit. This also includes the necessary mounting hardware for installation. There are general recommendations for the correct installation work with hanging furniture:

• Check the location of the outlets of communications: water supply, sewerage. If necessary, make the appropriate redevelopment.
• After the eyeliner, mark the approximate fastening on the wall.
• Do not markup "by eye". All drawing lines should be checked using the building level. The errors made lead to distortion.
• For the assembly of hanging cabinets, it is better to turn to professionals. If the installation is carried out independently, then use third-party help. This will allow you to “try on” the pedestal against the wall, holding it with your hands, and precisely mark the places of fasteners.
• The “bedside table-sink” set is fastened with the help of anchor hooks (studs), for which it is necessary to drill the corresponding holes.
• If the wall cladding is made of ceramic (tiled) tiles, prepare the drilling sites by carefully “gouging” the holes with a chipper. This will allow the drill to smoothly enter the surface of the tile and not slip off.
• Work on brick and cinder-concrete walls should be carried out with a drill bit.

At the last stage of work, it is worth using a regular open-end wrench. Upon completion of all of the above steps, a pre-assembled siphon and mixer are connected. After installation, it is recommended to check the tightness of all connections, and treat the joints of the cabinet walls and wall surfaces with plumbing sealant.

Practical recommendations

Compact designs with a minimum number of drawers are ideal for small bathrooms. The weight of such items is relatively small, which significantly reduces the load on the walls. Such models are suitable for any premises, while saving free space.

Simple wall cabinets without a wash basin can be installed if you already have a floor sink, but you need additional storage space. The weight of such furniture is small, since the body does not include heavy items of plumbing and ceramics.

In public places, it is advisable to install suspended structures with two or more sinks. This will allow several people to use the washbasin at the same time, reducing waiting times and increasing the level of comfort. In this case, the type of washbasins can be anything: from built-in rectangular to overhead round ones.Large-sized products are much larger in size and weight. Given the specifics of the goods, such furniture sets can be purchased "on order". Their cost depends on the brand of the manufacturer and starts from 30,000 rubles.

Connections

Interfacing of parts is a key stage of the technical process. Chipboard, MDF are assembled on confirmations, pre-drilling holes with stepped drills. The connection is technological, but not reliable enough due to the pressed structure of the plates. Drywall is fixed with self-tapping screws to galvanization, the finish is glued.

The long boards of the shield are rallied in a tongue-and-groove, key way. Shields with sidewalls are assembled on dowels, dowels, in a mustache.

The sides of the boxes are joined on spikes, labor-intensive dovetail joints are distinguished by their strength.

It is difficult to make a high-quality tenon connection with a hacksaw and a chisel; it is best to use a milling cutter or tenon cutter. Rescues fastening with confirmations, reinforced with fixing dowels on glue.

Hanging sink installation methods

If you decide to install a wall-hung type sink in your bathroom, then special attention must be paid to the fastening. There are several ways to install such sinks.

Installation of a sink without fixing. This option should be used for products made of ceramics. They are light in weight, so they will not collapse under their own weight.

Installation of a sink with fixation on metal brackets. If the product is made of natural stone, which in itself is a heavy material, then this installation option is used. By using brackets when installing the sink, a rigid fastening is provided, thanks to which the product is able to support its own weight.

Installing a sink on a wall cabinet.Of all the options, this one is the best. Hanging pedestal does not require allocation of space on the floor and at the same time is securely fixed to the wall in this room. The sink is installed in a special form in the cabinet.

What to consider when choosing furniture

When choosing a cabinet for your bathroom, you need to consider a number of important points. First of all, it is the height and width of the product. They must exactly match the dimensions of the bathroom so that the furniture does not “get lost” in a large room or look too bulky in a small one. The optimal width for the sink is 0.5-0.65 m. This will be quite enough to use plumbing and not splash water.

The hanging cabinet for the sink can be fixed at any height convenient for the user. The height of the floor options must be selected in order to use them comfortably.

However, for small spaces, such a bowl will be too large. It is desirable to install the so-called compact here, 0.3 m wide

It is worth paying attention to the site intended for the installation of the mixer, if you intend to put it here. Its dimensions must be sufficient for mounting the selected model. Look at the depth of the bowl

The deeper it is, the less spray will fly out of it when used.

Look at the depth of the bowl. The deeper it is, the less spray will fly out of it when used.

The height of the cabinet is also important. It is considered optimal to install the sink at a level of 0.8-0.85 m from the floor level. However, if those who will be using the equipment are shorter or taller than average, they may be uncomfortable. The hanging cabinet can be fixed at the desired level, furniture on legs or on a plinth has a fixed height.This must be taken into account when buying.

It is desirable that the filling of the cabinet under the sink into the bath is as functional as possible. It can be shelves of different heights. It is better to choose removable structures, since it is easier to care for them. You can always take it out, wash and dry. It's good if you can adjust the height of the shelves. This makes it easier to choose the best option for you. Roll-out shelves are ideal for corner cabinets, which are very convenient to use.

It is desirable that the cabinet under the sink be as spacious and convenient as possible for use. The number of shelves and their purpose is selected individually in each case.

For direct models, they are also used. It is necessary to decide for what purposes the internal space of the bedside table will be used and select fillings specifically for this

It is worth paying attention to the number of doors and their location.

It is important that they can open freely, without interfering with free movement around the room and without touching other furnishings and plumbing

If there is no room for free opening of the doors, perhaps the best option would be a cabinet with open shelves or drawers. The number of doors can also be different, but usually structures up to 0.4 m wide have one door, wider ones have two. Very attractive curbstones of original design. If you like just such a model, you should think it over well

It is very important that it is convenient to use, and it fits well into the overall design.

Having decided on the model, it remains to choose the color and control the quality of performance. When choosing furniture design, you need to consider the design of your bathroom. Everything should be designed in a common style and color scheme.The most beautiful cabinet, which does not fit into the design of the bathroom in terms of color or style, will stand out from the general context and will not decorate, but ruin the bathroom.

The cabinet under the sink can be made in various styles. This makes it easy to choose furniture for your interior.

Designers advise choosing light-colored furniture for bathrooms. It is much easier to care for than the dark one, since the streaks from soapy water are less noticeable on it. Regarding the quality of workmanship, it is worth considering not only the countertop, sink and cabinet, but also the fittings. All fasteners must sit firmly and not wobble. When opening, a creak should not be heard. The best material for fittings is chrome-plated metal. Painted plastic will lose its original attractive appearance very quickly.