Electric boiler for heating a private house: an overview of the 15 best models of electric boilers

When is an electric boiler the best solution?

Gas is not available to everyone: some settlements are located too far from the highway, and sometimes installing a gas boiler is not at all appropriate.For example, for a country house that is heated several times during the winter, it makes no sense to purchase an expensive set of gas equipment.

Solid fuel boilers also have a number of disadvantages: it is necessary to harvest and store fuel, and most solid fuel units cannot work for a long time, more than 4-5 hours, on one load of fuel. In addition, they are inertial and do not allow precise temperature control. In this case, the electric boiler is able to solve the heating problem quickly, reliably and at no extra cost.

Advantages of electric boilers for a private house:

• easy to install, connect and maintain;
• have a high level of automation;
• allow you to accurately set the desired temperature;
• work silently;
• no need to connect to a chimney;
• do not require a separate room, most household models are mounted on the wall with their own hands.

Flaws:

• require connection to the shield with a separate cable;
• boilers with a power of more than 9 kW are produced only for a three-phase voltage of 380 V;
• due to high electricity tariffs, heating costs several times more.

Buyer Tips

When choosing an electric boiler for heating a private house, you should pay attention not only to reviews and electricity consumption, but also to other parameters. 1. Mounting method

In an apartment or in a private house of small size, it is optimal to install a wall-mounted boiler. They look aesthetically pleasing, neatly fit into the interior of the home, and at the same time are able to produce a significant temperature. As for the floor options, they can be attributed to industrial or semi-industrial models. These are units for large households with a power of 24 kW.

Mounting method.In an apartment or in a private house of small size, it is optimal to install a wall-mounted boiler. They look aesthetically pleasing, neatly fit into the interior of the home, and at the same time are able to produce a significant temperature. As for the floor options, they can be attributed to industrial or semi-industrial models. These are units for large households with a power of 24 kW.

1. Mounting method. In an apartment or in a private house of small size, it is optimal to install a wall-mounted boiler. They look aesthetically pleasing, neatly fit into the interior of the home, and at the same time are able to produce a significant temperature. As for the floor options, they can be attributed to industrial or semi-industrial models. These are units for large households with a power of 24 kW.

2. How to connect to the mains. Economical electric boilers of low productivity are plugged into a regular 220 V outlet. But for units of medium or high power, it will be necessary to lay a three-phase 380 V network. A conventional 220 V network will not pull such a load.

3. Number of connections. Here is the standard classification: single-circuit and double-circuit models. The first ones are exclusively for heating, the second ones also heat water for plumbing.

4. And yet the main indicator is performance. It determines the consumption of electricity and the heating area. Standard minimum - 100 watts per square meter

Pay attention to this point: the worse the thermal insulation of your house, the more power the boiler will have to buy, and, accordingly, you will have to pay more for electricity later.

A few more guidelines. By current strength should be limited to a maximum of 40 A. Electric boiler nozzles - 1 ½ ″ or more. Pressure - up to 3-6 atmospheres.Mandatory power adjustment function - at least 2-3 steps.

Be sure to take an interest in the quality indicators of the local power supply - if the voltage drops to 180 V in the evenings, the imported model will not even turn on.

Before buying an electric boiler for 10-15 kW and above, find out if the transformer from which the house is powered will pull. And then you will have to lay an additional line to your estate.

As for specific models, the most popular are imported, as they provide high performance with minimal power. Among the most bought, according to sellers, are:

• wall-mounted, single-circuit Tenko KEM, 3.0 kW / 220V, cost around $ 45-55;
• wall-mounted, single-circuit UNIMAX 4.5/220, cost $125-200;
• wall-mounted, single-circuit Ferroli LEB 12, 12 kW, price - $ 350-550;
• wall-mounted, single-circuit Protherm Skat 9K, 9 kW, cost $510-560.

Possible connection problems

Now let's look at the other side of the coin. The disadvantages that those who want to organize heating the house with an electric boiler will have to face are few, but they are quite significant. For example, the lack of the permitted limit of electrical power allocated for a private house. Since almost 1 kW of electricity is required to produce 1 kW of heat, the consumed electrical power of the heat generator is almost equal to the required thermal power to heat the building. If the cottage is connected to electrical networks in a single-phase circuit with a supply voltage of 220 V, then most likely it will not work to get a limit of more than 5 kW, and this will only be enough to heat 50 m2 of area.

With a power consumption of 5 kW of electricity, the current strength will be approximately 23 amperes.Not every wiring can withstand such a current, so just plugging the heating electric boiler into a socket will not work. You will need to make the connection according to all the rules, with power supply by a separate cable, a protective earthing device and the installation of automatic disconnecting devices.

In the case when a thermal power of 10 kW and above is required, a three-phase network with a supply voltage of 380 V is indispensable. To make such a connection, you will need design and permit documentation agreed with the electricity supplier. Only after this is it possible to install an electric boiler, as well as the installation of cables and other electrical devices.

TOP-5 Russian-made gas boilers

Russian gas boilers did not stand out too much among similar products in the budget segment. However, in recent years there has been a clear increase in the quality and capabilities of Russian heat engineering.

Successful and reliable designs have appeared, characterized by stable and durable operation. A separate advantage should be considered the cheapness and availability of spare parts, which increases the demand for units. Several popular models:

Lemax Patriot-10 10 kW

A unit of relatively low power, suitable for an apartment or cottage. It is able to develop 10 kW, which allows you to heat 100 sq.m.

Unit parameters:

• • boiler type - parapet;
  • functional - single-circuit;
  • Efficiency - 90%;
  • power - 10 kW;
  • dimensions - 595x740x360 mm;
  • weight - 50 kg.

Advantages:

• energy independence;
• reliability, stable operation without failures;
• low cost of the boiler and spare parts.

Flaws:

• ignition difficulty;
• it is impossible to control the condition of components and parts without stopping the system and disassembling the boiler.

Boilers of small power are good in apartments or country houses, where they have optimal working conditions.

Lemax Premium-30N 30 kW

Floor-standing non-volatile gas boiler with a capacity of 30 kW. Designed for heating an area of ​​300 sq.m.

Its parameters are:

• boiler type - convection;
• functional - single-circuit;
• Efficiency - 90%;
• power - 30 kW;
• dimensions - 470x961x556 mm;
• weight - 83 kg.

Advantages:

• high power;
• ease of setup, adjustment;
• for such power is very low cost.

Flaws:

• high fuel consumption;
• great weight and size.

Boilers of high power can be connected in a cascade, forming complexes for heating large areas.

Lemax Premium-12,5N 12.5 kW

Gas floor standing non-volatile boiler for heating small houses or apartments. It is intended for work in rooms up to 125 sq.m.

Unit characteristics:

• boiler type - convection;
• functional - single-circuit;
• Efficiency - 90%;
• power - 12.5 kW;
• dimensions - 416x744x491 mm;
• weight - 60 kg.

Advantages:

• economy, work efficiency;
• it is possible to install a pressurized burner and an external turbofan to enhance traction;
• relatively low price.

Flaws:

• it is inconvenient to light the burner;
• often have to clean the open combustion chamber.

To some users, Russian boilers seem unnecessarily simple, primitive. This belief changes after the first breakdown, when the cost of repairing an imported boiler makes us look at domestic analogues with different eyes.

ZhMZ AOGV-17.4-3 Comfort N

Non-volatile convection gas boiler designed for space heating up to 140 sq.m:

• boiler type - convection;
• functional - single-circuit;
• Efficiency - 88%;
• power - 17 kW;
• dimensions - 420x1050x480 mm;
• weight - 49 kg.

Advantages:

• reliable and stable operation;
• a good set of parameters;
• independence from connection to the power supply network.

Flaws:

needs a separate room with a chimney.

The boilers of the Zhukovsky plant are known for their reliability and simplicity of design. They are in great demand among buyers.

Lemax PRIME-V20 20 kW

Compact boiler for space heating up to 200 sq.m. and hot water supply.

Options:

• boiler type - convection;
• functional - two-circuit;
• Efficiency - 92.5%;
• power - 20 kW;
• dimensions - 430x770x268 mm;
• weight - 29 kg.

Advantages:

• optimal set of qualities;
• low price;
• simplicity and reliability of the design.

Flaws:

a voltage stabilizer is needed, since the boiler is volatile.

Domestic units seem to many inconvenient and difficult to use. However, these shortcomings are more than offset by the reliability and efficiency of boilers.

The best solid fuel boilers for direct combustion

Viadrus Hercules U22

The lineup

The model range of this series of Vidarus boilers is represented by seven solid fuel boilers with power from 20 to 49 kW. The most productive of them is able to heat a building up to 370 sq.m. All equipment is designed for a maximum pressure in the heating circuit of 4 atm. The operating temperature range in the coolant circulation system is from 60 to 90 ° C. The manufacturer claims the efficiency of each product at the level of 78%.

Watch product video

Design features

All models of the presented line are designed for floor installation. They have an open combustion chamber with air supply due to natural draft.The large square-shaped doors easily open wide, which is convenient when loading fuel, removing ash and inspecting the condition of internal elements.

The built-in heat exchanger made of high-quality cast iron is adapted to work in a single-circuit heating system. The boilers do not have devices powered by an external electrical network and are operated in a completely autonomous mode. All settings are mechanical.

Fuel used. The design of a spacious firebox is designed to use firewood as the main fuel, but coal, peat and briquettes can be used.

Zota Topol-M

The lineup

The line of six Zota Topol-M solid fuel boilers starts with a compact 14 kW model designed to heat a house for an average family, and ends with an 80 kW unit capable of heating a large cottage or production workshop. The boilers are designed for operation in systems with pressure up to 3 bar. Efficiency of thermal energy use is 75%.

Watch product video

Design features

Their distinctive feature is a slightly raised design, which makes it more convenient to open the ash pan door and empty it. Open type combustion chamber with chimney connection from the rear wall. There is a built-in temperature sensor. All adjustments are made manually.

A heat exchanger for a single-circuit heating system is mounted inside, connected to 1.5 or 2” pipelines. Boilers work offline. Products of this brand are easy to install and reliable in operation.

Fuel used. Firewood or coal is used as fuel, for which a special grate is provided.

Bosch Solid 2000 B-2 SFU

The lineup

Solid fuel boilers Bosch Solid 2000 B-2 SFU are represented by a number of models with a capacity of 13.5 to 32 kW. They are able to heat buildings with a usable area of ​​up to 240 sq.m. Parameters of the circuit operation: pressure up to 2 bar, heating temperature from 65 to 95 ° C. Efficiency according to the passport is 76%.

Watch product video

Design features

The units have a built-in single-section heat exchanger made of cast iron. It is connected to a single-circuit heating system through standard 1 ½” fittings. The boilers are equipped with an open type combustion chamber with a 145 mm chimney. For normal operation, a connection to the electrical network with a voltage of 220 volts is required.

The temperature regulator and protection against an overheat of water is provided. The ash pan has a small volume, so it requires regular cleaning. Manufacturer's warranty 2 years. The design is simple, safe and highly reliable.

Fuel used. The boiler is designed to use hard coal. On this type of fuel, it demonstrates high efficiency. When working on wood or briquettes, the efficiency is noticeably reduced.

Protherm Beaver

The lineup

A series of solid fuel boilers Protherm Bober is represented by five models with power from 18 to 45 kW. This range completely covers any private house. The unit is designed to work as part of a single-circuit heating circuit with a maximum pressure of 3 bar and a coolant temperature of up to 90 ° C. For the correct operation of the control system and actuation of the circulation pump, connection to the household electrical network is required.

Watch product video

Design features

Boilers of this series are equipped with reliable cast-iron heat exchangers. The original design of the combustion chamber increases the efficiency of heat transfer.Exhaust gases are discharged through a chimney with a diameter of 150 mm. For connection to the heating circuit, there are branch pipes for 2”. Such boilers are designed for long-term operation.

Fuel used. The declared power is designed for burning firewood with a moisture content of up to 20%. The manufacturer has provided for the possibility of using coal. In this case, the efficiency of work increases by several percent.

Boiler of low power ZOTA Balance 6 6 kW for giving

A small low-power boiler for 6 kW. Power can be adjusted within 2-6 kW. Wall mounting, dimensions - 260x460x153 mm, weight - 8 kg. The coolant heats up to 30-90 degrees. Maintains high pressure in the system - up to 6 atmospheres. Connection from 220 or 380 Volts. The area is suitable for a room of 60 square meters. m.

A simple unit is controlled mechanically, has three stages of power adjustment. There is no display. External control is allowed with the removal of control toggle switches to another room. It costs 6100-7600 rubles.

The model is well suited for a country house as a low-power backup boiler to maintain a minimum temperature while the owners are away. Also recommended for giving.

ZOTA 60 Lux 60 kW high power

ZOTA is a young Russian company that appeared in 2007 and specializes in the production of high quality heating equipment. The high power ZOTA 60 Lux boiler is designed for 60 kW. It is capable of serving an area of ​​up to 600 square meters. Operates on three-phase current 380 V. The coolant heats up to 30–90 degrees at system pressure up to 6 atmospheres. At a cost (44,600–56,600 rubles) it is not higher than devices with 2–3 times less power.

ZOTA 60 Lux is hung on the wall. Dimensions - 370x870x435 mm, weight - 67 kg. The device is modern, has protection against overheating, self-diagnosis, display. Designed for underfloor heating.

ZOTA is actually an electric mini-boiler, suitable not only for heating a residential building, but several houses or commercial real estate at once.

Pros:

• the most powerful in the ranking;
• mounted for heating up to 600 sq. m;
• connection of warm floors;
• pressure in the system - up to 6 atmospheres;
• relevant for heating commercial real estate;
• wall execution.

TOP-10 rating

Consider the most popular models of double-circuit gas boilers, recognized by experts and ordinary users as the most successful in terms of design and operation:

Buderus Logamax U072-24K

Gas double-circuit boiler designed for wall mounting. Equipped with a closed-type combustion chamber and a separate heat exchanger - primary copper, secondary - stainless.

Heating area - 200-240 m2. It has several levels of protection.

Models with the index "K" perform heating of hot water in flow mode. It is possible to connect a room temperature controller.

Federica Bugatti 24 Turbo

Representative of Italian heat engineering, wall-mounted double-circuit gas boiler. Designed to work in a cottage or public space up to 240 m2.

Separate heat exchanger - copper primary and steel secondary. The manufacturer gives a 5-year warranty period, which indicates confidence in the quality and operational capabilities of the boiler.

Bosch Gaz 6000 W WBN 6000-24 C

The German company Bosch is known all over the world, so it does not need additional introductions. The Gaz 6000 W series is represented by wall-mounted models designed for operation in private homes.

The 24 kW model is the most common, it is optimal for most residential and public buildings.

There is a multi-stage protection, the copper primary heat exchanger is designed for 15 years of service.

Leberg Flamme 24 ASD

Leberg boilers are usually referred to as budget models, although there is no noticeable difference in cost with the products of other companies.

The Flamme 24 ASD model has a power of 20 kW, which is optimal for houses of 200 m2. A feature of this boiler is its high efficiency - 96.1%, which is noticeably superior to alternative options.

Works on natural gas, but can be reconfigured to liquefied gas (replacement of burner nozzles is required).

Lemax PRIME-V32

Wall-mounted double-circuit boiler, the power of which allows you to heat 300 m2 of area. It is suitable for two-story cottages, shops, public or office spaces.

Produced in Taganrog, the basic technological principles of assembly were developed by German engineers. The boiler is equipped with a copper heat exchanger providing high heat transfer.

It is calculated on operation in difficult technical conditions.

Navien DELUXE 24K

Korean boiler, the brainchild of the famous company Navien. It belongs to the budget group of equipment, although it demonstrates high performance.

It is equipped with all necessary functions, has a self-diagnosis system and frost protection. The power of the boiler is designed to work in houses up to 240 m2 with a ceiling height of up to 2.7 m.

Mounting method - wall, there is a separate heat exchanger made of stainless steel.

MORA-TOP Meteor PK24KT

Czech double-circuit gas boiler, designed for hanging installation. Designed for heating 220 m2. It has several degrees of protection, blocking in the absence of liquid movement.

It is possible in addition to connect an external water heater, which greatly expands the possibilities of supplying hot water.

Adapted to unstable power supply voltage (permissible fluctuation range is 155-250 V).

Lemax PRIME-V20

Another representative of domestic heat engineering. Wall-mounted double-circuit gas boiler, designed to service 200 m2.

The modulating burner makes it possible to distribute fuel more economically by changing the gas combustion mode depending on the intensity of the coolant circulation. It has a separate stainless steel heat exchanger, can be connected to a room thermostat.

There is a possibility of remote control.

Kentatsu Nobby Smart 24–2CS

Japanese wall mounted gas boiler providing heating of 240 m2 and hot water supply. Model 2CS is equipped with a separate heat exchanger (primary copper, secondary stainless).

The main type of fuel is natural gas, but when changing jets, it can be converted to the use of liquefied gas. Most of the performance characteristics correspond to European boilers of similar power and functionality.

It is possible to use several design options for the chimney.

Oasis RT-20

Wall-mounted double-circuit gas boiler of Russian production. Designed to work in rooms of about 200 m2. Equipped with an efficient copper heat exchanger and a stainless secondary assembly.

The combustion chamber is of a turbocharged type, there is a built-in expansion tank and a condensate trap.

With an optimal set of functions and high build quality, the model has a relatively low price, which ensures its demand and popularity.

3 Thermotrust ST 9

The Thermotrust ST 9 electric boiler made it to our rating due to the best price. The device can be built into a heating system with forced circulation. Experts consider resistance to power surges to be a distinctive feature of the model range, which is especially important for many regions of our country. The 9 kW model is connected to a 220 V household electrical network, with an efficiency of more than 93%. Despite the budget price, the boiler is equipped with stainless steel block heating elements, which indicates the quality factor of the product. The presence of smooth adjustment allows you to set the optimum temperature of the coolant.

In the reviews, domestic users note such positive qualities of the Thermotrust ST 9 electric boiler as low price, ease of installation, compactness, and high-quality assembly. The disadvantages of the device include the loud clicking of the starter.

Make an unambiguous conclusion in the question "which boiler is better - gas or electric?" it is forbidden. Each heater is suitable for specific conditions and circumstances. Therefore, we have prepared a comparative table of the advantages and disadvantages of each type of boiler so that you can draw your own conclusions.

Type of heating boiler	pros	Minuses
Gas	+ High efficiency + Low gas price + High performance + Wear resistance	— Fire hazard - The need for regular maintenance, cleaning - Noise during operation
Electric	+Easy to install in an existing system + Silent operation + Compactness + No need for regular maintenance + No combustion products are formed. + No exhaust hood required	- Dependence on the voltage in the network - Risk of burning the board from low voltage - High cost of electricity

The best electric boiler with floor installation EVAN EPO 18 18 kW

• Efficiency - 99%;
• overheat protection;
• remote control
• costs 13-25 thousand rubles.

Entered the top of electric boilers as an inexpensive, powerful, outdoor appliance. Power - 18 kilowatts. The shape resembles a vertically elongated tower with dimensions of 220x565x270 mm, weight is only 15 kg. The heat exchanger is made of stainless steel. It has a high efficiency of 99%. Three-phase connection. Maintains the temperature of the coolant in the range of 30-85 degrees. Inexpensive - can be found within the amount of 13200-25600 rubles. Russian made unit.

The pump and expansion tank must be purchased separately. Implemented protection against overheating. The device is installed in the basement or in a separate room under the boiler room. The device is additionally supplied with a single-stage (3 kg) or three-stage (6 kg) remote control. It is not portable, it is mounted in any room of the first, second floor when the boiler itself is placed in the basement.

It is operated as a main or backup together with a furnace, a solid fuel boiler.

Owners praise for reliability, solid assembly, versatility. I also like the remote control, high efficiency, power, low cost. No pump or tank.

The best solid fuel boilers for long burning

Stropuva Mini S8 8 kW

Bright solid fuel boiler with a safety valve, 8 kW. Suitable for heating a room of 80 m2. The fuel burns up to twenty hours, the temperature is enough for the whole night.

Characteristics:

• device type - solid fuel boiler;
• type of burning - long;
• contours - single-circuit;
• power - 8 kW;
• area - 80 m2;
• placement - outdoor;
• energy independence - yes;
• management - mechanics;
• combustion chamber - open;
• fuel - firewood, wood briquettes;
• safety valve - yes;
• thermometer - yes;
• weight - 145 kg;
• price - 53,000 rubles.

Advantages:

• compactness;
• long burning;
• ease of use;
• reliable handles;
• does not require power supply;
• durable construction.

Flaws:

• high price;
• heavy weight;
• it is difficult to wash the lining from soot;
• not very convenient loading of firewood.

ZOTA Topol-22VK 22 kW

A high-quality solid fuel device with a power of 22 kW, which is enough to heat an area of ​​​​220 m2. Convenient loading consists of two sections for laying firewood.

Characteristics:

• device - solid fuel boiler;
• contours - single-circuit;
• power - 22 kW;
• placement - outdoor;
• control - without control panel;
• fuel - coal, coal briquettes, firewood, wood briquettes;
• thermometer - yes;
• weight - 128 kg;
• price - 36860 rubles.

Advantages:

• various types of fuel;
• long burning;
• economical consumption;
• convenient operation;
• reliable construction.

Flaws:

• heavy weight;
• no control panel.

ZOTA Topol-16VK 16 kW

A worthy model of a solid fuel boiler with two sections for loading fuel. Designed for heating a small private house or workshop of 160 m2.

Provides long burning of firewood or coal.

Options:

• unit - heating boiler;
• fuel - coal, firewood, coal and wood briquettes;
• power - 16 kW;
• placement - outdoor;
• control - without control panel;
• Efficiency - 75%;
• thermometer - yes;
• weight - 108 kg;
• cost - 30100 rubles.

Advantages:

• heats up quickly;
• gives uniform heat;
• quality materials;
• long burning;
• the possibility of laying briquettes;
• easy control.

Flaws:

• high price;
• big weight;
• no control panel.

ZOTA Topol-32VK 32 kW

Reliable unit for solid fuel, power up to 32 kW. Capable of heating an area of ​​320 square meters. It is possible to install an additional heating element and connect an external control.

Great for a country house, provides long-term fuel burning.

Characteristics:

• device type - solid fuel boiler;
• the number of circuits is one;
• power - 32 kW;
• area - 320 m2;
• installation - floor;
• energy independence - yes;
• management - mechanics;
• Efficiency - 75%;
• fuel - coal, coal briquettes, wood briquettes, firewood;
• thermometer - yes;
• connection of external control - yes;
• weight - 143 kg;
• price - 40370 rubles.

Advantages:

• fast heating;
• reliable assembly;
• simple control;
• the ability to purchase a burner;
• economical fuel consumption;
• stylish design.

Flaws:

• heavy weight;
• high price.

Stropuva S30 30 kW

A full-fledged solid fuel boiler with a power of 30 kW for heating a room of 300 m2. Equipped with thermometer and safety valve.

Made of high quality steel, the material does not become red-hot when the boiler is heated.

The only boiler that continues burning up to 31 hours.

Characteristics:

• device - solid fuel boiler;
• power - 30 kW;
• area - 300 sq.m.;
• placement - outdoor;
• control - mechanical;
• contours - one;
• non-volatile - yes;
• combustion chamber - open;
• Efficiency - 85%;
• material - steel;
• fuel - firewood, wood briquettes;
• thermometer - yes;
• safety valve - yes;
• weight - 257;
• price - 89800 rubles.

Advantages:

• long burning;
• uniform heat;
• fast heating;
• quality materials;
• the presence of a thermometer;
• economical fuel consumption.

Flaws:

• high price;
• heavy weight;
• bulky.

Video instruction for installation of an economical boiler Galan

The undeniable advantages of such a boiler is fast heating. high fire safety, no connectors. due to which leakage often occurs. At the same time, the boiler works even at low power, which other types of boilers cannot. Unlike conventional heating elements, scale cannot be deposited on such boilers.

And what is very important, the performance of such a boiler does not decrease over time. And their service life reaches 25 years or more. The organization of heating by means of a gas boiler is considered the most economical and convenient

However, for people living in areas where there is no central gas pipeline, other options have to be found. In particular, a solid fuel or electric boiler, and more and more people are leaning towards the latter. This is due to the fact that in the first case it is necessary to purchase fuel and be able to properly heat, because with a small amount of firewood or a bad angle, this is a real science.

The organization of heating by means of a gas boiler is considered the most economical and convenient. However, for people living in areas where there is no central gas pipeline, other options have to be found. In particular, a solid fuel or electric boiler, and more and more people are leaning towards the latter. This is due to the fact that in the first case it is necessary to purchase fuel and be able to properly heat, because with a small amount of firewood or a bad angle, this is a real science.

The only disadvantage of electric heating is dependence on energy supply and increased power, which also causes increased costs. Therefore, the question arises which is the most economical electric heating boiler? The household category of products includes models with a capacity of 3-60 kW, although in most cases it is already impractical to install boilers with more than 10 kW due to a possible overload of the network. Thinking about how to choose the most economical electric heating boiler, we can say that a power of 5 kW is enough to heat an area of ​​​​80 squares, i.e. for a large three-room apartment or an average house.

• purchase a modern, more expensive model with a built-in thermostat, which allows you not to "overheat" the room when the weather conditions improve;

• ensure high-quality thermal insulation of the house by making an outer coat, installing dense sealants on windows and doors, etc.;

• install a two-zone meter that counts electricity consumed at night at a rate 5 times less;

• organize a system with forced circulation of the coolant.

Boiler "Rusnit" - the leader in the rating of inexpensive electric boilers

First of all, buyers seek to find an electric boiler for heating, the price of which will be acceptable to them and will not hit the family budget. Therefore, one of the first criteria is the cost factor of the heater. The most expensive appliances on the market are Italian and German boilers, so in this nomination there will be no mention of equipment from the Vaillant and Ferolli brands. Instead, consumers may be interested in Russian Rusnit electric boilers, the price of which is much lower than the cost of foreign analogues.

For example, the initial cost of a basic boiler from this brand is only 7 thousand rubles. For this money, the buyer will be able to purchase the Rusnit electric boiler, reviews of which indicate the functionality and reliability of the device. The base boiler has a small power reserve, which is 4 kW, so it can be adapted to the heating circuit of a one-room apartment or a cozy country house.

In the ranking of the best inexpensive boilers, products from the Rusnit brand turned out to be no coincidence, because in addition to the affordable cost, it also has a number of other advantages that the buyer can learn about by studying reviews of electric heating boilers posted on the website of this trusted Russian manufacturer.

Among the advantages are the following features:

1. the presence of a programmer that simplifies the work with the device;
2. minimal chance of burning;
3. ease of installation;
4. compact body with modern design;
5. high maintainability;
6. availability of spare parts and repair kits.