Water treatment is considered to be one of the most demanded activities of the NPP Polykhim organization, with the help of which it is possible to implement a complex of technical and technological measures. This company has unique technologies. With the help of them it is possible to purify, condition water with different initial quality.
Providing the population and industries with water of the required quality - these are the tasks solved with the help of installations water treatment, produced by NPP "Polykhim"
Technologies NPP "Polykhim"
The most basic technologies include the development of technical and economic measures: its action is aimed at optimizing costs while guaranteeing more efficient work.
Design project development. Post-project support: this includes recommendations for the organization of the effective operation of the training, as well as remote support for issues.
New and modern water treatment technologies
One of the main problems is the increased hardness of water. Because of it, you have to face a lot of problems that are difficult to solve. The following tips will help.
Tips
If you want to eliminate turbidity with residual chlorine as a filter medium, then use activated carbon. When disinfecting, use ozonizers. For iron removal, use manganese zeolite. With the help of such sand it will be much easier to contact with ferruginous compounds.If you want the retention reaction to go much better, then turn on the silicon.
Use filters to soften the water. If contact with hard water occurs, the salt must be changed to weak sodium.
Physical methods
Physical methods include filtration, straining and settling. Straining: Straining strains water through the layers of fabric, leaving any insoluble debris on the surface. Clean water enters the container above which the waste collection material is placed. This will help clean up the rainwater. Filtration: when filtering, developed filters with a cell are used. With the help of them, you can retain various impurities. Settling: This treatment method uses large tanks. Using folk methods will help remove motes.
Physico-chemical
Physical and chemical methods include:
Naofiltration. In this process, the membrane retains not only microscopic organisms, but also suspended impurities.
Flotation. During flotation, water is purified from oils and liquid impurities. This technique is used to purify circulating water.
Reverse osmosis system. It uses porous membranes. This technology allows you to remove enough impurities.
Solving hardware problems
During the operation of flow and storage heaters, problems may arise. The most basic of them are the appearance of an unpleasant odor and the mold that flows from the tap. To solve the problem, select the appropriate mode. The second problem is cold water does not meet the wishes of the owner of the water heater. In this case, you need to check the mode.The third problem is the problem with the pressure of the incoming water. To work, you need to have a low pressure mixer. If it is suitable for the capabilities of the device, then the shutdown mechanism can work. Another problem is the water supply is cut off.
