Plunger removal technology

What compounds can be used

If at home the sewer pipe in the kitchen or in the bathroom is clogged, you can also clean it with a slightly different composition that contains soda. To create a suitable enough ingredient, you need half a package of baking soda and the same amount of salt.Mix these products together and pour into the drain, pour hot water and leave for eight hours. It is advisable not to use the sewer at this time, therefore, the elimination of blockage must be done at night.

After the time has elapsed, we open the line with cold water and check how it passes into the drain, when slowly, we will have to use the plunger to clean the dissolved debris plug. This tool is suitable for plastic and metal pipes. It can be used both for prevention and for troubleshooting. These methods will help solve other issues besides how to clear the blockage in the sink in the kitchen.

Soda is also used in the amount of 1 cup, it is poured into the drain, after which it is poured with hot water and remains for 40 minutes. Then we simply wash off the composition in the pipe with plain water. If the plug of dirt that is clogged is small, then this technique will be no less effective, otherwise it will be necessary to clean the system repeatedly.

1. Boiler room at home ► The geyser does not light up: the main causes of a water heater breakdown and how to eliminate them
2. Boiler room at home ► What to do if the sink is clogged? – methods of elimination and preventive measures to prevent pollution
3. Boiler room at home ► Water flows from the tank into the toilet: the main causes of breakdowns and how to fix them yourself
4. Boiler room at home ► Why does the pumping station often turn on: causes of equipment failure and how to fix them
5. Boiler room at home ► Choosing cables for cleaning sewer pipes, or how to clear the blockage yourself
6. Boiler house at home ► Features of installation of a pipeline made of steel pipes, connection methods
7. Boiler room at home ► Do-it-yourself polypropylene plumbing: advantages of PP pipes, choice of parts, wiring methods, installation work
8. Boiler room at home ► How to clean the sewer in a private house - cleaning methods and their features
9. Boiler room at home ► Cesspool silted up - what to do? Signs of silting and cleaning methods
10. Boiler room at home ► Replacement of pipes in the bathroom
11. Boiler room at home ► What to do and how to avoid blockages in the sewer pipes and quickly clear the blockage in the sewer
12. Boiler room at home ► Ways of water supply
13. Boiler room at home ► How to punch a well with your own hands: types of wells and drilling methods
14. Boiler room at home ► Do-it-yourself piping in the bathroom - developing a scheme, choosing a method for laying water pipes, dismantling old pipes
15. Boiler room at home ► SODA
    

    SODA, see Sodium carbonate.

16. Boiler house at home ► Sodium hydroxide (Sodium hydroxide, Sodium hydroxide, Caustic soda)
    

    Substance: Sodium hydroxide (Sodium hydroxide, Sodium hydroxide, Caustic soda) Code: 150Agr. comp.: solid Hazard class: 150 MPC s/s: n/d MPC m/r: n/doBOV: 0.01 VOC:

17. Boiler room at home ► Emulsol (mixture: water - 97.6% sodium nitrite - 0.2% soda ash - 0.2% mineral oil - 2%)
18. Boiler house at home ► diSodium carbonate (Sodium carbonate, Soda ash)
    

    Substance: diNatrium carbonate (Sodium carbonate, Soda ash)Code: 155Agr. comp.: liquid/gas Hazard class: 155 MPC s/s: n/d MPC m/r: n/doBUV: 0.04 VOC: no Heating water supply boiler room

19. Boiler room at home ► Methods for dismantling concrete
20. Boiler room at home ► Ways of water supply at home

Sewer blockage prevention

In order to prevent regular blockages in your house or apartment, you must adhere to preventive measures.Although they are not 100%, they will save you from unpleasant consequences:

• Do not save on water with obvious fanaticism. If the amount of liquid necessary for their natural purification does not enter the sewer pipes, then expect trouble. The sewer system is especially in need of hot water, which at the initial stage can still cope with a slight fatty coating and prevent its accumulation. When pouring the rest of the rich broth and other similar compounds into the sink or toilet bowl, be sure to rinse several times or unscrew the water tap for a few minutes.
• Carefully monitor the level of liquid in the sewer wells. This rule primarily applies to the owners of private houses. If you are gaping, you can remember this when the contents of the well begin to exit through the drain holes in the plumbing units. This is especially dangerous if the system is not equipped with a check valve on the outlet pipe, and if this also happens on the basement floor, where the height difference with the liquid level in the well is minimal, you will certainly be flooded, you know what. The law of communicating vessels in this case will work instantly.
• Don't use the toilet instead of a trash can. Many plumbers do not recommend even throwing toilet paper into it. At the same time, many users wash away leftovers of food, sour jam with stones or cake from compote, cat litter, hair from a comb or wool from a pet brush, cotton pads and sticks, personal hygiene products, small household waste and other most unexpected items. . This is a sure step to the rapid formation of blockage.
• Be sure to install special protective nets on the drain hole of the kitchen sink.They will prevent a large amount of food waste from entering the sewer. Once the mesh is clogged, be sure to throw its contents into the trash can.
• If the financial situation allows you to purchase a household waste disposer, be sure to do it. The contents of the grinder after work should also be sent straight to the trash can.
• It is necessary to install nets on the drain hole of the bathroom. This will prevent hair from getting into the drain, which is the main cause of plugging.
• Be sure to carry out periodic preventive cleaning with boiling water or vinegar and soda.
• Do not trust the work of distributing sewer pipes and arranging the system as a whole to dubious workers.
• Do not forget that all items, and sewer pipes are no exception, have a certain resource. Exceeding it, you doom yourself not only to the risk of failure of the entire system, but also to the use of water containing rust particles. Change sewer pipes promptly.
• Regularly check that the liquid level in the drain well does not exceed the permissible level.

Remember that blockages always appear unexpectedly and disrupt the comfort of the inhabitants of the house. It is much cheaper to purchase nets for each drain hole than to resort to the expensive services of specialists.

The use of chemicals

In addition to self-made mixtures, other methods of cleaning sewer pipes are used. Now any store boasts a huge selection of various chemicals specially designed to remove blockages in the sewer.There are not only domestic products, but also foreign ones. There should be no doubts when choosing one or another means, since they all perfectly cope with their task.

The only caveat is that you only need to read the instructions before use, although usually all you have to do is just pour the solution into the pipe and wait a while.

Folk remedy for blockages in pipes

If you are not a supporter of household chemicals, then you can try to clear the blockage using folk remedies. What they are good for is that everything you need is at hand in any home. One of the popular folk remedies for cleaning pipes is soda and vinegar 9%. Removal of blockage occurs due to the violent chemical reaction of these two components. Pour soda into the drain hole of a sink, sink or bathtub, pour in the same amount of vinegar and close with a cork. Wait a few minutes and run hot water with strong pressure. This should help remove the resulting blockage.

Vinegar and baking soda is the most popular folk remedy for removing blockages.

Preventive measures

The drain can become clogged at any time of the day or season of the year. In order not to be left without sewerage, regularly carry out the prevention of blockages. You can prevent the problem from happening like this:

• install a fine-mesh net on the kitchen sink, which will trap food waste;
• do not flush hair into the toilet, do not throw hygiene products, toilet paper, wet wipes, construction waste into it;
• do not pour fat after cooking into the sink or toilet;
• monthly preventive cleaning of the sewer system;
• do not clean dirty shoes in the sink;
• water after washing the floors is better to pour into the toilet;
• it is better to install a grease trap under the kitchen sink, as well as an organic waste chopper (it has an electric drive and is connected to the home network).

Now it’s clear how to clean the pipe from blockage at home. It is quite possible to deal with traffic jams with improvised means, but it is better not to allow them to appear at all. Compliance with simple rules for the operation of the sewer system will eliminate this problem.

Video about the most effective way to clean the sewer

Removing blockage with a conventional plunger

Sink cleaning

Removing clogs in the toilet bowl and in the sink occurs in similar ways. First you need to install the rubber cup of the plunger directly above the drain hole and press firmly

An important condition is the presence of water, which should cover the rubber bowl. Then you need to sharply and quickly press the plunger handle up to 3 times

Repeat manipulations 3 or 4 times. The efficiency of work depends on the speed and force of pressing the plunger handle. After making shocks, you need to sharply tear off the plunger from the base of the drain hole so that the blockage can come out.

Cleaning the toilet

If everything is done correctly, there will be no trace of blockage. However, in advanced cases, the problem cannot be solved with a plunger. For difficult blockages, the use of chemical cleaners is recommended, and sometimes the intervention of a plumber.

The best granular pipe cleaners

Granular means are used in difficult cases. They are distinguished by a high concentration of active substances and at the same time are easy to use.

Grupa Inco Ludwik "Hydraulic" - an economical tool

5

★★★★★
editorial score

97%
buyers recommend this product

"Hydraulic" - effective granules for removing complex blockages.They are sold in plastic bottles of 500 ml. The screw-on lid reliably protects the product from dust and moisture. The wide neck and well-designed handle on the bottle make it easy to pour the product into the drain hole.

To eliminate the blockage, a small amount of granules is enough, so the packaging lasts for a long time. For maximum effectiveness, it is recommended to fill the product with hot water. After use, there is no unpleasant smell left in the room, which is especially valuable when working in poorly ventilated sanitary rooms.

Pros:

• copes with complex blockages;
• convenient packaging;
• removes odors;
• economical.

Minuses:

• toxic composition;
• hard to find in stores.

The high efficiency of the "Hydraulic" granules is ensured by the increased content of active substances and, alas, by the toxicity of the agent. Therefore, when using it, it is necessary to strictly observe safety precautions.

Mole Tornado - active granules

5

★★★★★
editorial score

95%
buyers recommend this product

Mole Tornado is a granular pipe cleaner that tackles grease, hair plugs, and food debris. It is suitable for all types of pipes and does not corrode their walls.

To use, you need to pour the granules into the drain hole and pour warm water. For complex traffic jams, it is recommended to repeat the procedure. For the reagent to fully act, you need at least 1.5 hours. Granules are sold in tight plastic bags of 90 g. This amount is enough for 1 application.

Pros:

• low price (25 rubles per bag);
• found in most households;
• convenient packing;
• no smell;
• suitable for all pipes.

Minuses:

• can spoil the details of plumbing made of enamel or stainless steel;
• works for a long time.

Despite the fact that the product does not have a pungent odor, Mole Tornado must be used carefully. The dust flying from the pellets can cause allergies or irritation of the respiratory tract.

Bagi Professional Products "Shumanit" - against difficult blockages

5

★★★★★
editorial score

93%
buyers recommend this product

Shumanit granules cope even with complex traffic jams, consisting of soap and grease deposits, hair and food residues. For the action of the reagent, 5-7 minutes are enough. The product removes bacteria and unpleasant odors from pipes. This efficiency is due to the addition of a complexing agent, which is responsible for loosening dense plugs of organic and inorganic origin.

Pros:

• sold almost everywhere;
• copes with most blockages;
• acts quickly;
• eliminates bacteria and odors.

Minuses:

• high price (from 90 rubles per 70 g);
• an unpleasant odor remains in the room for an hour.

Bagi "Shumanite" due to its pungent odor can only be used in well-ventilated areas and requires strict adherence to safety regulations.

Occurrence: causes

At first glance, it seems that there are many reasons for the formation of blockages.

However, all of them can be conditionally divided into 2 groups.

• A blockage is formed as a result of a foreign object entering the pipe - food debris, buttons, solid objects.
• The occurrence of blockage is associated with deposits on the inner surface of the pipes, as a result of which their clearance decreases, and water does not drain well. Such growths may consist of fats and other deposits.

It is important to understand the reason why the sink is clogged, since the choice of method for fixing the problem depends on this.When large objects enter the pipe, mechanical cleaning methods are usually used.

With a decrease in the diameter of the pipe due to deposits on its surface, chemical methods are resorted to. Combined blockages require alternate use of chemical and then mechanical methods of cleaning. As a rule, you can break through such blockages at home with your own hands.

Depending on the etiology, the “plug” in the pipe can be of several types.

• Operational blockage occurs as a result of prolonged use of the sink and the lack of preventive cleaning. As a rule, in this case, the pipes are covered from the inside with a layer of greasy plaque, small particles of food, and hair.
• Mechanical. The reason for its occurrence is a large object that has fallen into the pipe.
• The technical appearance is due to improper installation of the pipeline system, defective components. It is noteworthy that such a blockage may not appear immediately, but some time after the start of operation. Only changing the movement of water pipes, replacing nodes will help to cope with the problem.

A severe blockage can be caused by a foreign object entering the common house riser. Such situations are dangerous, since it is not possible to eliminate the blockage on their own. The problem is usually found not only in one pipe, for example, in the bathroom, but also in the kitchen and even the toilet (in the sewer). Water does not leave and, moreover, on its own, it arrives, filling the sinks, the toilet bowl and threatening to flood the room.

Blockage Prevention

It is recommended to replace the communications. This will prevent the formation of traffic jams in the future, because.contaminants quickly accumulate inside old pipes, the walls of which are uneven. A mesh is installed on the drain hole. It will prevent clogging of communications, as it will trap large contaminants. The mesh is cleaned as hair accumulates in it.

In addition, when installing new pipes, it is necessary to check whether the slope is maintained (1-2 cm per meter). This allows you to speed up the outflow of contaminated water through the pipes. For prevention, you should also not throw large debris into the drain hole. Even if a mesh is installed, particles will enter the pipeline. Periodically, communications should be cleaned using chemicals. This will eliminate the risk of blockage. In the future, you will not have to deal with cleaning the sewer system.

Removing blockages mechanically

You can also break through a blockage in a pipe at home mechanically, using a ruff, plunger, cable or metal wire with a brush at the end. The degree of clogging of the sewer will affect the choice of tool for work. For example, a shallow blockage can be pierced with a brush - making sudden movements.

To clean the pipes with a plunger, you need to perform the following steps:

1. Place the tool over the drain channel.
2. Open the water and draw it into the sink so as to cover the bowl of the plunger.
3. Make sure there is no water under the plunger.
4. Perform 15-20 vertical swinging movements without lifting the tool from the surface.

If all other methods of mechanical cleaning have not yielded results, you will have to use a cable. However, this procedure is the most difficult. The cable is very rigid, because it is made of twisted wire, rolled into a rod with a cross section of 3-5 mm.

The procedure for using the rope is as follows:

• first dismantle the siphon;
• the end of the cable with a handle is inserted into the sewer pipe and, turning it counterclockwise, is gradually immersed;
• during operation, the cable is periodically pulled out for cleaning;
• the procedure is repeated until the blockage is completely eliminated;
• at the end of work, mount the siphon again and flush the system with hot water.

After cleaning, a test run of water is carried out. If it leaves quickly, then the sewer is cleared well. If not, you will have to repeat everything.

Causes of clogged pipes

Over time, organic and inorganic deposits form on the walls of sewer pipes. Due to the appearance of such waste, its diameter can decrease even by 2 cm. This leads to a deterioration in the operation of the sewerage system.

Clogged pipe

Blockages are divided into two types:

1. Mechanical. It occurs as a result of falling into the sewers of a random object. For example, feminine hygiene products, woven napkins and other garbage.
2. Technical. This type includes the accumulation of deposits in horizontal sections of pipes. It appears due to non-compliance with the technical requirements for the installation of sewer pipes, which have a smaller diameter than all the others.

If you do not clean the pipes regularly, you will soon have to change them.

The immediate causes of blockages include:

• high content of body fat;
• silting of pipes;
• tissue entering the sewerage system;
• too small pipe diameter;
• rust formation in pipes;
• a large number of turns in the pipes;
• pipe wear.

Use of household products

How to clean the sewer? To answer this question, it is enough to recall the properties of various household products that everyone has in the house.The following sequence will help clear the blockage in a short time:

1. First you need to clean the drain hole from large debris.
2. Next, fill it with one liter of very hot water and leave it to soak for a few minutes.
3. Then you need to use the plunger.
4. After several manipulations with the plunger, you can fill the hole with one mug of soda, and then pour boiling water into it again.

This procedure may be carried out more than once.

Baking soda will help form an alkaline environment in the sewer pipes, which can remove blockages. In addition, it has excellent disinfectant properties. More:

1. And you can also arm yourself with this method.
2. In equal proportions, soda is poured into the pipe and vinegar is poured.
3. After the substances are mixed, foam forms, therefore, it is better to close the drain well with something and forget about it for two hours.
4. As a result, it remains only to get the cork and pour everything with boiling water.

A mixture of salt and soda will also save you from blockages at home. To create it you need:

1. Both ingredients are mixed in equal parts.
2. Boiling water is poured into the drain, and the mixture is left for several hours. At this time, you can not drain anything else into the pipe.

In general, in order to avoid the accumulation of debris in sewer pipes in advance, it is necessary to pour boiling water into them from time to time, which easily dissolves not only fat, but also soap pieces.

In a private house for flushing pipes, you can use the following recipe:

1. The combination of a glass of salt, a glass of soda and a quarter of a glass of cream of tartar after mixing should be poured into a well-closing container.
2. This mixture should be poured into the drain from time to time and poured with boiling water.
3. In just a minute, all that remains is to rinse the hole with ice water.

6 ways to clean the sewer

Home remedies to deal with blockages in sewer pipes are effective if you follow the instructions for using vinegar and baking soda.

There are several ways to clean plugs:

1. Method 1. Drain the water from the sink and remove all debris. The action of the mixture of soda and vinegar should take place directly in the pipe. First, powder is poured into it, after which acid is immediately poured. Warm up the vinegar. The drain hole is tightly closed with a rag or a special plug. It prevents the resulting foam from escaping back into the sink. Under the influence of a violent reaction, the fat begins to dissolve, and the dirt moves away from the walls of the pipes. Do not open the drain hole for 40 minutes. After cleaning is completed, the pipeline is washed with hot water.
2. Method 2. Here, boiled water is first poured into the drain. It helps soften the fatty plug. Next, the prepared mixture of heated vinegar and soda is introduced into the pipe. The duration of this cleaning is 2 hours. All this time, the drain hole remains closed.
3. Method 3. Boiling water is combined with soda powder and injected into the pipe. After 10 minutes, acetic acid is poured into it. Further, all actions are carried out in the same order as in the previous instructions. Cleaning is carried out after 2 hours. If there is no effect from the first time, the procedure is repeated. Additionally, it is fashionable to use a plunger.
4. Method 4. That requires two types of soda in equal amounts - calcined and food. The mixture is poured into the drain as deep as possible. Leave it there for 40 minutes.Part of the acetic acid is applied to the device itself, and the rest is poured into the drain. After half an hour, the toilet bowl or sink is washed with hot water.
5. Method 5. In this case, caustic soda is used. It is sold in powder or gel form. Requires 2-3 tbsp. mix the substances well and put them into the drain. Further, 1 tablespoon is poured into the pipe. boiling water, and the hole closes. After 2 hours, the drain pipe is flushed with boiled water. Wash all enamel parts thoroughly from caustic soda, as it can corrode the material.
6. Method 6. In equal quantities (half a glass), soda and salt are combined. The composition is poured into the drain pipe. After that, the mixture is poured with acetic acid. Seal the drain hole. After 2 hours, the pipe is washed with hot water.

A good effect for cleaning is a mixture of soda and salt. It will clean greasy deposits on the walls of pipes well. Both components are mixed in equal proportions and poured into the pipe. After an hour, it can be washed with plenty of hot water.

The blockage in the toilet can be cleaned in this way: first, pour a pack of soda into it, drain the liquid and wait at least 60 minutes. After that, another half pack of powder is poured into it, but now it is mixed with 2 cups of acetic acid. To improve the effect, it is better to close the toilet lid. It is recommended to carry out such cleaning 2-3 times a year.

How to clean a blockage in the sink with chemicals

If all of the above methods did not help, it's time to move on to household chemicals.The stores offer a wide range of all kinds of drugs and it is worth a little understanding of their line. It:

• Acid.
• Alkaline.
• Liquid and gel.
• Dry, loose.

What to pay attention to

• Consider the material from which your pipes are made - not all products are suitable for all types, so always carefully study the instructions. Stop at universal ones, such as Mole.
• Usually liquid products act more gently, by the way, they are more convenient to use.
• The use of bulk presupposes undoubted compliance with the instructions, they almost always offer to pour boiling water over it, if you don’t do it, the powder can harden.
• Always wear gloves, do not lean over the plumbing equipment, after adding the agent to it - a lot of heat is generated during the chemical reaction. In addition, the contents may splash out of the drain.

Using Chemicals to Clean Clogs

The most popular industrial substance is called "mole". the chemical agent KROT for cleaning sewers is a domestic preparation "Mole for pipe cleaning". Feedback from numerous buyers and the demand for such products on the market for many years confirm the excellent recommendations of this tool for cleaning sewers. This chemical preparation is available in the form of a powder, which is simply poured into the drain hole when the pipe is clogged.

If you haven't heard of it, trust me - it's much better than many imported counterparts, even though it's cheaper. Therefore, there is no point in paying for a foreign brand.

Note! When using Mole, precautions must be taken: protect hands with gloves and prevent powder from entering the respiratory tract. Wastewater treatment using the "mole" is carried out in the following order:

Wastewater treatment using the "mole" is carried out in the following order:

1. Fill the drain hole with 50 to 150 milligrams of the substance.
2. Then the "mole" remains inside the base for at least several hours (the indicated time is usually indicated on the label - depends on the composition and amount of these or these components in the liquid).
3. After this time, the substance is washed with a large amount of running water.

In general, if the blockage consists of organic matter or rust, it should be dissolved after chemo.

Note! Please note that the mall is made by different manufacturers, which means that the operating instructions for each individual facility may vary slightly. Keep this in mind and be sure to read the terms of use of the purchased product so that you do not participate in any way. Popular sewer cleaning chemicals

Popular sewer cleaning chemicals.

The next most popular pipe cleaner is Tiret from a German manufacturer. This cleaner is a gel-like substance and is available in special containers in several versions: Tiret, Tiret-turbo and professional. Tiret can be used both to prevent blockages in sewer pipes and to eliminate other serious plumbing problems.

When Tiret gel enters the sewer, it spreads along the inner surface of the pipe, quickly neutralizing fat and other deposits. One of the advantages of this tool is its gentle effect on pipes, so it can be used to clean pipes of any condition and material of manufacture. Despite the rather high cost of Tiret-turbo, consumer reviews indicate the cost-effectiveness of its use, because. to eliminate blockage, a small amount of the drug is enough and it lasts for a long time.

Next, consider the method: how to clean a clog in the sink mechanically, which should be used if soda, vinegar, tiret, mole, and moth do not help.

6. Vacuum + vacuum

To flush the sewerage of a two-section sink, use two plungers at the same time. When cleaning the drain in one bowl, be sure to close it in the second. If you don't have two plungers, you can create a vacuum with a cloth pressed tightly against the drain hole.

How to clean a blockage in the sink with folk methods

Many families, especially those with young children, are wary of using aggressive chemicals to clean sewer pipes and prefer to use a variety of safe folk remedies. Indeed, too many chemicals surround us in everyday life, so if it is possible to replace household chemicals with safe home remedies, it is quite appropriate to use this. An alternative to household chemicals used to clean sewers is ordinary soda and vinegar. The advantage of this method of eliminating blockage in the pipe is its safety, low cost and ease of use. How to clean the sewer pipe with these simple tools?

   
Baking soda and vinegar are the most economical way to clean clogged pipes.

As you know, soda is an alkali, and vinegar is an acid. The reaction that occurs when an acid and an alkali combine is accompanied by rapid heating and the release of carbon dioxide. This "volcanic kit" perfectly dissolves debris, dirt and grease accumulated in the sewer pipe. It is convenient that all the necessary components: soda, vinegar and boiling water are completely available and are available in every home. In addition, despite the obvious cost-effectiveness of this method, it is quite effective.

Thus, in the event of an unexpected blockage, there is no need to run to the store in search of the necessary chemical preparation, you just need to pour half a pack of dry soda into the drain hole and pour half a bottle of ordinary white vinegar there (it can be slightly heated to improve the process). After that, it is necessary to close the drain hole with some kind of rag and wait from about 30 minutes to 2 hours. The resulting violent reaction will tell you that the process is going in the right direction. Then the rags are removed and about 3 liters of freshly boiled water are poured into the sewer pipe. Dissolved dirt and debris will go down the drain and the pipes will become completely clean.

Simple, and absolutely harmless for pipes of any kind, have long been well-proven folk remedies for removing blockages.

1. If the plug is not too tightly set, the following action will help: pour boiling water into the drain hole if the pipes are steel. Plastic can be spilled simply with hot water, running it at full power. Check the result after 20 minutes.If it doesn't work, try other methods.
2. Lemon acid. Dissolves lime deposits well. Pour into the drain 50 gr. means and pour a glass of boiling water on top. After 10 - 20 minutes, pour with a powerful stream of water.
3. Salt with soda. Perfectly removes fatty deposits in the pipes. Dissolve salts and soda in hot water - you should get a very concentrated solution. Pour into the drain and after half an hour work with a plunger to help remove the plug. Then rinse with strong water pressure.
4. They say that soda calcined in a dry frying pan, and then used for its intended purpose (diluted with water), then the efficiency increases significantly.
5. An unusual way is with a vacuum cleaner with a reverse blowing function. Lucky, and the function is available, wrap the vacuum cleaner tube with a rag, firmly install it directly into the hole in the sink. And break through the blockage with a strong air stream. Instead of a rag, you can use a rubber cup from a plunger.

Note! This method of cleaning the pipe can also be used for prevention, from time to time carrying out this procedure, which helps to prevent more serious clogging of the sewer.