Lamp for the entrance with a motion sensor: TOP 10 popular models and tips for choosing

How to install?

Consider an example of mounting a backlight for illuminating stair steps. In this case, it should be noted that the sensor must be located near the first and last stages. To install light strips under the steps with your own hands, you must follow a series of steps.

1. Cut along the marking lines diode strips of optimal length. A connector should be connected to one segment.
2. Degrease the steps.For these purposes, a solvent, acetone or other substance that breaks down fat is used.
3. Remove the protective shell, attach the diode tape to the lower base of the step with the adhesive part.
4. Place the wires under the stairs (through the small slot in the riser).
5. If necessary, install a socket near the stairs (for this you need a socket, wires and a socket).

In order for the backlight to work, it is necessary to correctly connect all the components of the circuit. For this, the sensor is calibrated. The wiring from the sensing element is also "hidden" under the stairs.

After that, you need to fix the power supply and the box. The chosen place should not spoil the aesthetics of the interior, but at the same time it should provide quick access for maintenance. The wiring is assembled using clamps and removed in a special box. It is recommended to place it on a wall surface located under the stairs. The last step is to connect the power supply to the network.

You can learn how to make smart lighting from any motion sensor by watching the video below.

How to choose lamps for the entrance

What lamps exist, we have already figured out. Now it is worthwhile to establish in detail on several factors that should be taken into account when choosing:

1. Under what conditions can it be used.
2. Is it possible to change the fixtures or how difficult is it.
3. The amount of electricity consumed.
4. Do I need to recycle energy saving light bulbs?
5. It is also recommended to read the reviews.

It is recommended to install LED or halogen lamps, they have proven themselves in the best way.
Here you will find a comparison of LED and halogen lamps.

What type of sensors are best for entrances

At the entrances of residential buildings, lighting devices and systems with active motion sensors (microwave, combined, ultrasonic) are equipped. They recognize and respond with sufficient accuracy to the appearance of people in the corridor or on the site. An infrared motion sensor is not installed in the entrance. It is often triggered by the appearance of animals (weight up to 25 kg) or simply random objects that have fallen into the entrance from the street.

Features of anti-vandal lamps for housing and communal services

The low consciousness of the residents or the unhealthy situation in the area lead to the fact that an anti-vandal lamp is installed to illuminate the entrance. Its body is made of highly durable materials (plastic, polycarbonate). This makes it difficult to destroy the lighting fixture under impact, pressure. Tightly screwed screws and fasteners hidden in the wall prevent the lamp from being stolen.

Fluorescent lamps

For a long time, this type of lamp occupied a leading position among lighting elements. And well deserved. Fluorescent lamps created a uniform and stable luminous flux, while consuming much less energy. Their soft light did not tire the eyes. And the service life - about 20,000 hours - far exceeded the resource of an ordinary light bulb, designed for 1000 hours of burning.

The rapid filling of the market of lighting products with LED designs has replaced fluorescent lamps.

LED designs

Recently, LED lamps have been mainly used for lighting entrances. They are environmentally friendly, do not emit harmful substances during combustion. This type of lamp is resistant to continuous on-off operation. This property allows you to make systems from them and operate in automatic mode.

In order to save money, lamps in entrances, technical and other common areas are constantly on at 15-20% of their power. And when motion (noise, heat) is detected, the LED lamps of housing and communal services with a sensor light up brighter. In passage corridors and places of temporary residence of people, such a lighting regime is justified. And LED light sources do not deteriorate, their service life is not reduced.

Disposal of LED lamps does not require special conditions. If a lamp with such a lamp is destroyed as a result of mechanical impact, then sharp fragments and hazardous substances do not appear. The use of a board with electrical circuits in such lamps makes it difficult to steal, makes it impractical to steal individual elements.

The best motion sensors for security systems

Models of this type are designed to control penetration into a protected area. They are resistant to low temperatures and mechanical stress, they are connected to signaling complexes.

Poliservice ID-40

5

★★★★★
editorial score

97%
buyers recommend this product

The sensor responds to changes in the level of infrared radiation in the detection zone. It has a long range of action - 40 meters. The "Alarm" and "Fault" operating modes have separate indicators for convenient monitoring of the device status.

Operating temperature range is -40..+50 °C, protection class is IP65. The model can be installed outdoors and is not afraid of difficult operating conditions. The owner has the ability to adjust the response threshold depending on individual needs.

Advantages:

• long detection range;
• convenient setting;
• high class of protection;
• simple installation;
• resistance to voltage surges.

Flaws:

high price.

ID-40 will be useful for controlling movement in a long corridor or at the entrance to a building. A reliable choice for all-weather use.

Rielta Piron-4D

4.9

★★★★★
editorial score

95%
buyers recommend this product

The model is equipped with a spherical lens. It provides high collecting capacity, low distortion and formation of anti-sabotage zones.

The pyro receiver has an insect protection screen. Temperature resistance from -30 to +50 °С guarantees stable operation of the sensor outdoors. Service life - about 8 years.

The range is 10 meters. The sensitivity of the device is adjustable. The sensor does not respond to the movement of objects weighing up to 20 kg. This eliminates the risk of a false alarm when a pet or child appears in the controlled area.

Advantages:

• heat resistance;
• sensitivity setting;
• protection against false positives;
• durability;
• compactness.

Flaws:

complex installation.

Rielta Piron-4D is suitable for outdoor installation. A reliable choice when you need to control the front door or window.

Teko Astra-515 (Spanish A)

4.8

★★★★★
editorial score

92%
buyers recommend this product

The rugged housing and the absence of quick opening elements prevent intentional disruption of the sensor. It can be mounted on a bracket for convenient viewing angle adjustment. The user has two modes of operation of the device, depending on the sensitivity settings.

Range - 10 meters. The detector is anti-interference and has a low level of false alarms associated with the movement of pets, changes in light levels or temperature.The bright LED indicator simplifies control of operability of the device. Current consumption - 15 mA.

Advantages:

• convenient setting;
• simple installation;
• impact-resistant case;
• high activation rate;
• protection against false positives.

Flaws:

large dimensions.

Teko Astra is recommended for installation in small areas. A reliable choice for a private house or apartment.

Crow SWAN-QUAD

4.8

★★★★★
editorial score

88%
buyers recommend this product

The main working element of the model is a quad PIR sensor of increased sensitivity. Digital microprocessor processing of incoming data provides additional analysis of the speed and mass of objects. This makes it easier to filter out false positives.

The body is made of impact-resistant ABS plastic. The device is tamper protected. The model can be connected to the central panel of any type of alarm system via an NC cable. The detection range is 18 meters.

Advantages:

• sensitivity setting;
• installation on any surface is possible;
• small dimensions;
• anti-vandal protection;
• resistance to low temperature.

Flaws:

small viewing angle.

Crow SWAN-QUAD worth buying for inclusion in the burglar alarm system. An excellent solution for installation in a warehouse or basement.

The best budget LED lamps

Inexpensive, but high-quality entry-level models are reliable and have a good service life.

IEK LLE-230-40

4.9

★★★★★
editorial score

95%
buyers recommend this product

The LED lamp with a large bulb body illuminates the room with cold neutral light with a color temperature of 4000 K.The luminous flux of 2700 lm is evenly distributed in all directions through the matte surface. The model is equipped with an E27 base for standard sockets of various types of lamps.

With a power consumption of 30 W, the illumination is equivalent to a 200 W incandescent lamp. Bright light allows you to see every detail even in a dark garage, warehouse or basement. The lamp works at a voltage of 230 V and does not overheat. The service life declared by the manufacturer is about 30,000 hours.

Pros:

• Bright lighting.
• White neutral light.
• Durability.
• Minimal heating during operation.
• Small power consumption.

Minuses:

Bright light can tire your eyes when used for a long time.

A powerful LED lamp will be an economical and safe alternative to halogens. The model is best suited for creating maximum illumination in the territory of retail premises, warehouses, utility rooms or outdoor areas.

ERA B0027925

4.8

★★★★★
editorial score

92%
buyers recommend this product

An energy-saving filament lamp in the form of a candle is installed in a luminaire with an E14 base. With an energy input of 5 W, the lamp produces a luminous flux of 490 lm with a color temperature of 2700 K - just like a conventional 40 W lamp. Yes, and filamentary LEDs look very similar to the usual incandescent filament, but much more economical.

"Candle" has a diameter of 37 and a height of 100 mm. Matte translucent surface evenly scatters light in all directions. The model is durable - about 30,000 hours, as well as resistant to voltage drops from 170 to 265 V.

Pros:

• Low level of power consumption.
• Filament LEDs.
• Resistant to voltage drops.
• Long service life.

Minuses:

Not the highest brightness.

The lamp emits a pleasant warm light and does not tire your eyesight. The model is suitable for most night lamps and lampshades. The low power consumption and low operating temperature of the bulb ensure safe operation in decorative lighting fixtures.

REV 32262 7

4.8

★★★★★
editorial score

90%
buyers recommend this product

Economical LED lamp in the form of a ball with a diameter of 45 mm looks very similar to a conventional one and is approximately comparable in size. The model can be used in all luminaires for E27 base.

Warm light with a color temperature of 2700 K is diffused through a frosted bulb. A 5W output is equivalent to a 40W incandescent bulb. The light bulb works smoothly at temperatures from -40 to +40°C, which allows it to be used outdoors in cases where lighting power is not very important.

Weak heating during operation increases the safety of using the model in night lamps and under plastic lampshades. The service life specified by the manufacturer is about 30,000 hours.

Pros:

• Compactness.
• Nice warm glow.
• Low temperature resistant.
• Sturdy round flask.

Minuses:

Gives weak light.

An inexpensive model with a warm and non-irritating glow is convenient for domestic use and allows you to create comfortable lighting near a coffee table or bed.

Osram LED Star 550lm, GX53

4.8

★★★★★
editorial score

89%
buyers recommend this product

The LED lamp in the form of a tablet disk with a diameter of 75 mm is used in ceiling lamps and directional light fixtures. It puts out 7W of power, which is equivalent to a 50-60W incandescent light bulb. The glow angle is 110°.

The model is designed to illuminate the space with warm white light. The luminous flux reaches 550 lm. The lamp is connected to the GX53 luminaire connector using two special pins.

The operating temperature of the model does not exceed +65 °C. This allows you to safely use the lighting fixture. The light bulb itself can work up to 15,000 hours.

Pros:

• Easy to install and replace.
• directional light.
• Weak heating.
• Profitability.

Minuses:

Due to its shape, the lamp does not fit all fixtures.

This model has a fairly wide scope, despite the non-standard shape. It is suitable for lighting retail outlets, places of recreation and entertainment, as well as a decorative element in the apartment.

Arlight No. 4 in the ranking of the best manufacturers.

Arlight is a leading manufacturer of high quality LED equipment.

In order to ensure that the LED strips, fixtures, various types of lamps that Arlight produces provide flawless lighting throughout their life, high-quality components are used, each stage of production undergoes strict quality control.

Using Arlight products, you can solve any problem of lighting residential and public spaces, architectural or landscape lighting, as well as festive or advertising illumination.

You can find out what new products the company has introduced in the Arlight manufacturer's card.

NAVE - motion sensors

A new series of NAVE light control devices - infrared and microwave motion sensors for lamps, lamps, spotlights and other light sources with a supply voltage of 230 V.

The novelties are equipped with a built-in adjustable light sensor that allows you to ...

Motion sensor Arlight PRIME

Read more — News | Manufacturer's novelties: "Arlight"

The best motion sensors for lighting systems

Similar models are used to automate the inclusion of lamps and fixtures. Their installation allows you to reduce energy costs and increase comfort when using lighting fixtures.

TDM DDM-02

4.9

★★★★★
editorial score

95%
buyers recommend this product

The body of the model is made of durable non-flammable plastic, which guarantees reliability and safety of use. The switch-off time can be adjusted from 10 seconds to 12 minutes. The trigger threshold is also configurable.

The transmitter power is about 10 mW, the viewing angle is up to 180°. The device meets the IP44 protection class, that is, it is not afraid of minor exposure to moisture and dust.

Operating temperature -20..+40 °C allows the sensor to be used not only inside but also outside the premises. The device is installed in any convenient place: under the ceiling, in front of the front door or in the ceiling lamp.

Advantages:

• flexible setting;
• convenient installation;
• low energy consumption;
• wide viewing angle;
• suitable for outdoor installation;
• long service life.

Flaws:

high price.

TDM DDM-02 has a minimum switching load. The sensor is recommended for work with low-power lamps and fixtures.

Feron SEN30

4.8

★★★★★
editorial score

93%
buyers recommend this product

The model has a high detection rate (0.6-1.5 m/s). This guarantees timely sensor triggered while driving in the controlled area. The built-in design and long cable allow you to install the sensor not only on a flat surface, but in general in any convenient place.

The range of the sensor is from 5 to 8 meters, dimensions - 79x35x19 mm. The device does not take up much space and easily connects to the network. Operating temperature -10..+40 °C contributes to the stable use of the device in unheated rooms.

Advantages:

• fast installation;
• small dimensions;
• resistance to low temperature;
• convenient connection.

Flaws:

high power consumption.

Feron SEN30 reacts to hand movements. A reliable solution for installation in a residential area or outbuilding.

LLT DD-018-W

4.8

★★★★★
editorial score

90%
buyers recommend this product

A feature of the model is the flexibility of customization. The user has the ability to adjust the sensitivity of the sensor, set the desired mode of operation depending on the time of day. The time that the lamp stays on after the sensor is triggered is also subject to change.

The maximum range of the device is 12 meters, the load power is up to 1200 watts. The angle of inclination is changed due to the presence of a special hinge. The device can operate for 10,000 hours, that is, it can work continuously for more than one year.

Advantages:

• flexible setting;
• durability;
• maximum heat resistance;
• low price.

Flaws:

large dimensions.

LLT DD-018-W is capable of operating at temperatures from -40 to +50 °C. A versatile solution for both indoor and outdoor installations.

Camelion LX-28A

4.7

★★★★★
editorial score

87%
buyers recommend this product

Changing the operating modes of the electronic sensor is carried out automatically. The 360° viewing angle ensures a clear sensor response, regardless of the location of the person in the room.The device can be fixed to the ceiling or wall with three self-tapping screws.

The maximum load power is 1200 W, the recommended installation height is 2.5 m. The device instantly responds to movement within a radius of up to 6 meters. The model is able to independently determine the onset of the dark time of the day, has a power indicator for ease of maintenance.

Advantages:

• compact dimensions;
• convenient installation;
• wide viewing angle;
• low power consumption;
• operating status indication.

Flaws:

instability to power surges.

Camelion LX-28A will be useful for working with powerful lighting fixtures. An economical solution for installation in small spaces.

Operating rules

Street lights with a sensor are always weak in that their sensor part can break very quickly. Now they have learned to keep it intact and safe longer.

It is necessary to estimate the entire coverage area without any obstacles. Most often, indoor plants, drapery, and a hinged interior are contraindicated among objects - all this affects the supply of false signals.

Because of this, a constant closing and opening of the circuit may occur, which will affect the service life. The system may even reboot and fail. Be careful with this.

Wipe from time to time with a dry and soft cloth. Do not increase the load. Use only for its intended purpose.

Be sure to turn off the power when installing. Clearly follow all the points in the instructions. If everything is done, and the device refuses to work, then contact the master.

Do not allow water to come into contact with the surface. Fire or smoke is also not recommended.All this helps to ensure that there is no accident or breakdown ahead of time.

Benefits of sensors

Sensors include photosensitive elements. They react to changes in light intensity, lack of light, or other external factors. In devices for lighting the entrance, you can install a sensor:

• passive work - infrared; it reacts to the appearance of sound or thermal radiation in the working area;
• active action - ultrasonic, microwave, combined; they produce waves of a certain frequency, capable of detecting and identifying an object, an obstacle.
• The preferred mode of operation of the lighting fixture and its operating conditions will determine the type of sensor it is equipped with.

movements

Motion sensors monitor movements and active movements in their area of ​​​​action (usually up to 15 meters). They process the information received and send signals to turn off or turn on lighting fixtures. Depending on the configuration and features of the work, there are:

• motion sensor in the entrance;
• installed in lighting fixtures illuminating the local area;
• sensors in security systems.

illumination

Light sensors (photorelay, photosensors) are also called twilight. They react to changes in the brightness of the natural light flux. Sensors of this type are in great demand in the autumn-winter period, in the off-season.

Combined

This type of sensor combines several tracking technologies such as microwave and IR. Their parallel operation allows to detect and recognize movement in the working area with great accuracy. Unlike light sensors, they monitor movements around the clock.In addition, combined sensors are able to monitor electrical equipment located in the entrance.

ABB No. 7 in the ranking of the best manufacturers.

Motion sensor - Germany, Italy, Russia (Moscow, Khotkovo, Cheboksary, Yekaterinbur, Lipetsk)

ABB circuit breakers once again prove that the quality of ABB is of the highest standard.

ABB switches and dimmers are available in a variety of colours.

Everyone will be able to choose something expressive for their home.

Attractive design at a democratic price is just one of the advantages of ABB.

If you want to know more, see brand news in this category.

ABB i-bus KNX. Motion sensor for the corridor. Busch-Presence Corridor KNX.

In February 2017, ABB launched the new Busch-Presence Motion Detector, specially designed for corridors, lobbies and any other space that is rectangular, long or with a small narrow aisle.

Thanks to the adapted range…

Device types

Today, there are several types of luminaires that contain a sensor in their design that turns on the light only when there is active movement in the controlled area. The classification is based on the device of the lamp. Such lighting fixtures are of the following types:

infrared. This model is the most popular. The principle of operation is based on the recognition of changes in the temperature indicator of the environment. Only then will the light turn on. Since any person emits infrared light, false alarms on strays or pets can be effectively avoided;

infrared sensor

ultrasonic sensor

• ultrasonic. Most of these models are more often used for street lighting.But for the entrance, they are also a good enough choice. Lighting by such a device will turn on when the sound sensor registers;
• microwave. The principle of operation of this model is similar to an ultrasonic lamp, but instead of sound, the sensor here perceives radio waves. When the wave is interrupted, the contact closes and the light turns on. It can be used with equal efficiency both on the street and in entrances or residential premises;

microwave sensor

combined. This type of lamp contains several sensors at once. This allows many times to improve the technical characteristics of the device and make it more efficient in operation. Here, in order for the light to come on, the sensor must read two indicators. In popularity, they are slightly higher than infrared models.

Combined sensor

According to the type of installation, fixtures can be of the following types:

• embedded;
• invoices;
• ceiling;
• console, etc.

In this case, the choice should be based on the place of future operation in terms of the fastest and easiest way to install. In addition, lighting devices with a motion detection sensor can be:

• standalone or wireless. Here, batteries or accumulators are used as a power source;
• wired. When installing them, a prerequisite for the operation of the device is the connection to the power line.

As you can see, the choice is quite wide. Therefore, when buying this kind of lamp, it is necessary to take into account not only its technical characteristics, but also the place of service.For entrances, it is best to use models made of durable materials, with an extended service life, and also able to withstand low temperatures and humidity, since it is not always warmer in the entrances than on the street. It is better to use devices designed for outdoor use.