Do-it-yourself curtains for a balcony from the sun: instructions for creating original curtains

Types of roller blinds for plastic windows

There are several types: in minicassettes and MINI systems.

Roll system MINI

The MINI roller system is a conventional roller blind on a compact shaft. Due to the small dimensions of the shaft, they can be installed on individual PVC window sashes.Plastic mounts are fixed without drilling, so the integrity of the frame is not violated.

roll system Mini on plastic windows

To prevent sagging of the fabric on the window flaps, the metal bottom rail is fixed with two magnetic holders. They are glued to the frame with double-sided foam tape. At the same time, in addition, the sash can be opened in any plane.

The low price and spectacular miniaturization ensure good demand for MINI systems. When decorating windows, they often perform a darkening function. However, they cannot give the effect of complete blackout, since there are gaps on the sides through which light can penetrate, although by default the Mini system uses direct winding of the web on the shaft (in this case it moves closer to the window sash).

According to the fastening method, fabric roller blinds used indoors are divided into two types:

• with installation directly on the window frame (mini) - close the transparent part;
• with fastening above or inside the opening (rollo and large roller blinds) - close the glass itself, the frame and part of the wall.

To choose the right product, you need to determine which of the types of roller shutters corresponds to your preferences in design and functionality. After that, you need to take measurements of your window. Many companies that install roller blinds and blinds provide this service, but if for some reason you decide to take measurements yourself, we will show you how to do it right.

During measurements, the following details must be taken into account:

The fastening of the roller shutter should not interfere with the maximum opening of the window sash.
Pay attention to the handle - whether its shape will interfere with the lowering of the canvas.
Whether the overall dimensions of the product correspond to the parameters of the window group.
Does the location of the window hinges prevent the full use of the curtains, otherwise you will have to shift the fabric, which will have a bad effect on the overall design.

Note! For measurement, it is better to use a metal construction tape measure, since sometimes even one wrong millimeter can make a difference and make further installation of the structure impossible.

How to take window measurements to install curtains with a mini system (MINI)

Measurements of windows for curtains of this model are also not particularly difficult.

• Measure the width of the glass and add 30 mm - this will be the minimum required width of the canvas covering the glazing bead on both sides of the window.
• Measure the height of the glass and add 120 mm - this is the length of the curtain, which will be enough to completely cover the transparent part and install the mount.
• Determine the location of the control (as a rule, it happens on the side of the loops).
• Choose one of the types of fastening.

After that, you need to determine on which side it will be more convenient for you to place the roller shutter control mechanism. The length of the chain, which regulates the lifting and lowering of the curtain, should not exceed 2/3 of the height of the canvas.

Note! The overall parameters of the product are calculated taking into account the dimensions of the brackets and will be 10 - 40 mm larger than the width of the fabric. Curtains of this type are the easiest to install, do not require much effort and special tools for fastening.

They are mounted without drilling, using plastic brackets and double-sided adhesive tape that come with the product.The advantage of a mini-rollo over other fabric roller blinds is that when they are used, the window sill and frame remain free. This makes it possible for the rational use of window space.

Curtains of this type are the easiest to install, do not require much effort and special tools for fastening. They are mounted without drilling, using plastic brackets and double-sided adhesive tape that come with the product. The advantage of a mini-rollo over other fabric roller blinds is that when they are used, the window sill and frame remain free. This makes it possible for the rational use of window space.

How to hang curtains on a balcony without a cornice

On most balconies, there is not enough space between the top of the frame and the ceiling, which precludes mounting the cornice on the wall. Installing a cornice on the wall may also be undesirable due to the limited area of ​​\u200b\u200bthe balcony or loggia.

How to fix curtains on a balcony with Velcro tape

Therefore, Velcro tape is often used to fasten curtains on a balcony. Velcro tape consists of two textile strips. One of which has micro hooks, and the other has micro loops. When the strips are compressed, the micro-hooks interlock with the micro-loops and they are firmly attached to each other.

A denser tape with micro hooks is glued to the frame, and another with micro loops is sewn to the top edge of the curtain. And in order to hang the curtain, it is enough just to combine the tapes and squeeze them until they stick together. This method is suitable for roller blinds and roman blindsas well as lightweight fabrics. It looks very modern if a separate curtain is installed for each sash.

The process of fastening curtains on the balcony with Velcro tape is greatly simplified

In situations where a cornice cannot be used, in addition to Velcro, good old strings are used. The strings are mounted on the ceiling, and it is convenient to hang curtains made of tulle, organza or threads on them. Now there are thick wire strings that look stylish and are, in fact, steel cables. Such a cable does not sag and can withstand even heavy curtains.

How to fix the curtain on the balcony with hooks

Recently, the method of attaching curtains to simple hooks has found its place. Decorative hooks at an equal distance are fixed above the upper part of the window opening. And a ribbon is sewn to the upper edge of the curtain itself, on which loops are attached or eyelets are installed. As a result, the curtain hangs easily and freely.

Where it is not possible to mount a cornice, curtains can be fixed using decorative hooks.

Also, the so-called point fixing is perfect for non-standard balcony windows. The only drawback of this method of installing curtains on the balcony is the inability to move the curtain. You can move them away only with the help of tacks, changing the general appearance of the window design.

How to install roller blinds on a balcony

At present, almost everyone has installed modern PVC windows on balconies and loggias. Roller blinds on such windows are attached as follows:

1. In the upper part of the frame, plastic brackets are screwed onto the screws, which will hold the rotating roller for winding the roller shutter fabric.
2. Plastic brackets of type S cling directly to the upper edge of the sash and are additionally fixed with adhesive tape. The brackets will hold the tube with a chain or spring mechanism for winding the web.
3. Sometimes the brackets are simply glued to the frame with glue or double-sided tape. But this method of fastening can only be used with a light canvas.

Roller blinds are attached to the window using self-tapping screws.

Only bamboo blinds do not wind onto the top roller. They are twisted into a roll when lifting and are fixed in the desired position.

How beautiful to hang curtains on the balcony, depending on the size

There are many nuances in the design of windows on balconies and loggias. Window openings, as a rule, reach directly to the ceiling, so there is no way to fix the cornice on the wall. Therefore, if the area allows, then the cornice is mounted on the ceiling.

Curtains for a large balcony

You can hang classic curtains and curtains on the windows of the spacious balcony. Moreover, lush French and English versions are allowed. You can use airy tulle, organza, muslin, cambric. Curtains can be catchy colors or have a beautiful photo print. French curtains in a long or short form look great on wide balcony windows. There is enough space on the large balcony to hang curtains on the cornices.

Classic curtains will look great on a large balcony

Curtains for a small balcony

Japanese, Roman or roller blinds are suitable for the windows of a modern small balcony or loggia. All these types of curtains require minimal space, can be mounted directly on the window frame, do not interfere with opening the sash. Also, bamboo curtains are suitable for a small loggia or balcony.They are not only environmentally friendly and durable, but also look solid in any interior style. If classic curtains and curtains are used, then they should be shortened and strict so as not to take up much space.

Curtains on a small balcony should take up as little space as possible

Curtains on the balcony with panoramic windows

Panoramic glazing to the floor means a lot of light, a beautiful view, a feeling of lightness and spaciousness. Such windows are called French. On the balcony, it is advisable to install a separate curtain for each sash in order to ensure free opening for ventilation and to easily adjust the illumination. Colors are usually chosen in pastel light shades.

In appearance, Austrian curtains, roller blinds, Roman blinds, horizontal blinds are suitable for French windows. Multi-colored blinds look original and harmonious.

For panoramic windows, Japanese or filament curtains are often chosen. The thread ones are easy to drape and can be fastened in different ways with clips or simply tied.

Panoramic windows need not only beautiful curtains, but also those that can completely close them.

Austrian curtains look appropriate on French windows. They do not take up much space, since they occupy only the upper third of the window in length.

If necessary, you can effectively combine different types of curtains. Finding beautiful curtains for a balcony with panoramic windows will be a little more difficult than for windows with regular openings.

Curtains on the open balcony from the sun

Curtains made of durable fabrics are hung on the open balcony. Moreover, they should be easy to wash, because this will have to be done quite often due to rapid contamination. Curtains on an open balcony can be made from inexpensive and simple materials.In addition, you can use them on an unglazed balcony only in the dry and warm season. Just as important is the question of how to hang curtains on the balcony so that they are not blown off by the wind.

Curtains on the open balcony from the sun should not only be durable, but also easy to wash.

How to make roller blinds with your own hands?

For the manufacture of roller blinds, you will need the following materials and tools:

1. Selected fabric of the required size.
2. Ribbons, ropes or cords for making garters. They should be twice as long as the canvas and still have some margin for tying.
3. A wooden bar or a metal pipe for a rod-shaft, which should be equal to the width of the canvas. The cross-sectional diameter can be 2.5–5 cm.
4. Metal bars or additional bars to weight the bottom edge of the curtain.
5. Long ruler, chalk, iron, needles, thread, scissors, sewing machine.
6. Dowels, self-tapping screws, drill, screwdriver for installation.

After preparing all the materials and tools, you can begin to manufacture roller blinds yourself.

Step-by-step instruction:

1. Cut the material to the required dimensions and sew it along the width on one side, and along the length on both sides. The resulting "pouch" is turned inside out.
2. The design is weighted with a bar or a metal bar, which can be placed inside the curtain or make a special pocket for it. If the weighting agent is placed inside the bag, then a small distance should be retreated from it and the fabric should be stitched. After that, the canvas is sewn up from above.
3. The curtain is ironed, wrapped around the rod and attached to it with a stapler. If the bar is made of a metal pipe, then the fabric is sewn together.
4. The ties are thrown over the bar and fastened in the same way as the canvas.

A handmade roller blind will be rolled up and assembled by hand. Tied with ribbons or cords, you can easily adjust its height. The structure is installed and reinforced with self-tapping screws.

Roller blinds with side cord

You can make a design with such a mechanism from the same materials, but you will additionally need two nylon cords, two plastic rings and hooks on which the cord will be fixed.

Manufacturing instructions:

1. The cut material is sewn from the wrong side only along the length.
2. Pockets must be made at the top and bottom of the canvas. A rail is inserted into the lower pocket and fixed.
3. Stepping back from the top edge of the curtain 5 cm, plastic rings are sewn onto the ribbons. About 15 cm should be retreated from the edge of the fabric.
4. The product is fixed in the window opening or on the window with hooks.
5. A smaller cord is tied to one of the outermost hooks, passed through the bottom pocket and threaded through the ring.
6. A long cord is fixed in the same way, only it should be passed through both rings.
7. The cords are assembled, fastened and fixed on the wall.

Due to the counterweight, such a curtain will be easily twisted.

Do-it-yourself mechanism for roller blinds

To make the canvas open more conveniently, you can make a reliable, but more complex mechanism yourself. For its manufacture you will need:

• round wooden plank;
• stainless steel pipe;
• two bearings.

A cut is made along the entire length of the pipe using an autogenous or welding machine to release the web.Next, the curtain is attached to a wooden bar with a stapler or glue. Bearings are attached to the prepared rod-bar, which should sit tightly inside the pipe. Holders are thrown through the mechanism, and the canvas is wound.

Roller blinds from leftover wallpaper

Paper shutters will look very creative in any room on the windows. You can make them with your own hands in just one evening.

Manufacturing instructions:

1. On the wallpaper, draw a rectangle equal to the width of the glass. In length, it should turn out to be one-fourth of the window glass longer.
2. Cut out a rectangle, and form folds on it every five centimeters. It should turn out "accordion".
3. A hole is pierced through the middle of the canvas with an awl, through which a cord is inserted.
4. In the upper part of the paper product, the garter is fixed with a knot, and the canvas is neatly straightened.
5. Double-sided tape is glued and the structure is attached to the frame.
6. The five lower folds on the inside are glued together with adhesive tape. It should look like a peacock tail.
7. The end of the cord is brought inside out and a retainer is put on it.

Roller blinds from wallpaper are ready. They can be made in contrast or from the wallpaper that remained during the repair of the room being decorated.

What you need for fastening

To get started, here's a little guide.

If you want to do without a cornice, you will need:

• Drill;
• A hammer;
• Screwdriver (preferably a screwdriver);
• Roulette;
• self-tapping screws;
• Nails;
• Strong thread (better fishing line);
• Nails;
• Velcro.

Strong thread attachment

Modern mechanism for attaching curtains to a fishing line

The easiest option is to hang the curtains on a strong thread.

How to do it:

• Take two nails (can be decorative), drive them into the wall along the edges of the window opening;
• Make small holes in the upper edges of the curtains (they can be very beautifully processed);
• Pass a thread through these holes (if you do not want to make holes in the curtain, you can attach it to the thread with clips or alligator clips);
• Fasten the ends of the thread to the nails (the tension should be very strong).

This mounting method has another advantage - an affordable price.

Velcro

Velcro can be used to fasten curtains

With this fastening, there will be no gap between the wall and the curtain, which allows for maximum darkening of the living space. This method is best suited for children's rooms and bedrooms, where you have to close the window during the day.

There are different ways to attach Velcro curtains:

You can attach the curtains directly to the wall. In this case, the hard part of the Velcro is attached to the wall (this will require self-tapping screws and screws), and the soft part is sewn to the fabric.

How to hang tulle without cornice? Easy - with Velcro

• The second way is to hang the curtains on a wooden block (bar). In this case, the bar or bar is attached to the wall (with screws or self-tapping screws), and the Velcro is nailed to it with a stapler or glued with wood glue.
• If the window frame consists of several glazed sections, each of them can have its own curtain. In this case, the hard Velcro strip must be attached to the sash (with small nails or a stapler), and the soft strip must be sewn to the fabric.

This work can be done with particular ease.

Hook fastening

This photo shows the original hooks that can be used for curtains.

Another option is to use decorative hooks designed for clothes.

• Buy your favorite hooks;
• Fix them in a row above the window opening at the same distance from each other;
• Sew loops to the curtains;
• Use them to tie the curtain to the hooks. Ready!

Originality is limited only by your imagination.

Ceiling cornice

If for some reason it is impossible to install a regular cornice, you can hang curtains on the ceiling cornice.

Ceiling cornice - a unique alternative to wall-mounted window designs

They are:

• Profile (plastic or metal, with tracks for attaching curtains);
• Sticks (brackets are placed on the surface, to which long sticks are attached);
• Stringed (a string is pulled between the brackets).

When choosing, consider:

• The number of layers of material, taking into account lambrequins;
• curtain weight;
• General design of the room.

How to hang tulle on a ceiling cornice or curtains made from other materials?

As fasteners for installing curtains on a ceiling cornice, use:

Curtain design for the balcony: photos of beautiful interiors

Curtains in the interior on the balcony help to create a unique image of this room, significantly complement it and contribute to the atmosphere of coziness and comfort. For balconies, their own interior solutions have been formed. The following are in high demand.

Provence. This style does not like contrasts. All elements of the room should be elegant and light. For this style, light linen curtains are best suited. In the Provence style, it is sometimes customary to do without curtains and use lattice shutters or blinds made of natural material.

Scandinavian.This style is somewhat minimalist with strictly 2-3 colors. Light is dominant. The uncomplicated practical environment allows the presence of flowers and abstract posters. Roller or Roman light curtains are installed on the balcony windows.

American style has a respectable look. On the balcony or loggia there may be a rocking chair, furniture in dark brown colors, and on the windows - Roman blinds or blinds.

The classic style is familiar to everyone. Here curtains should be functional and harmoniously fit into the interior.

Answering the question which curtains are best to hang on the balcony, we can safely say those that take up less space and are easy to care for. Of course, they still have to match the style of the room. The sunny side is also taken into account. Depending on this, curtains are selected denser or more transparent.

By color, it should be borne in mind that darker curtains will absorb light and heat up, so for the sunny side it is better to choose thick, but light or double-sided curtains: they will repel light. Lambrequins or any exquisite draperies would be out of place here. The modern market offers many options for ready-made curtains for the balcony. Therefore, each hostess will be able to easily choose the option that will look best on her balcony.

Popular types

It is clear that not every style is suitable for a balcony or loggia. For example, there will be heavy velvet curtains a la classic out of place.But this does not mean that the design of such a room will cause difficulties, because there are others, and ideally suitable options.

Roman style

Roman blinds are a design of rectangular fabric panels that do not move apart like usual curtains, but rise vertically and are fixed at any height with even frills. They are suitable for balconies of any footage.

If the loggia is combined with a room or a kitchen, then long Roman blinds look spectacular, they are also suitable for spacious loggias of 6 meters or more. The position of the curtain is adjustable thanks to a kind of laces sewn into the fabric.

Roller curtains

In their operation, they are very similar to Roman blinds, but differ from them in that when they are lifted, they are neatly folded into an even roll, which practically does not take up space on the window, thereby saving space in a small room. This is their undoubted merit.

They are a solid piece of dense fabric. They are made exactly to the size of the window and placed in a rigid plastic or aluminum frame.

In addition to the convenience of opening and closing, roll-up protective curtains have an attractive design.

Practical blinds

Blinds on the loggia are distinguished by a very large selection of materials (plastic, bamboo, straw, wood).

Thanks to this, with the right combination of color and design, the blinds are easy to match to any interior, and if you combine them with classic fabric curtains, you can get an interesting do-it-yourself option.

You can place blinds not only on the window opening and the wall, but also on each sash individually.

Japanese curtains

Japanese curtains are more suitable for placement on panoramic windows.Floor-length fabrics move parallel to each other (for comparison, compartment doors can be cited as an example). They move by analogy with blinds, moving along the eaves. This is a great option for Asian-inspired designs and minimalism.

Classic variant

Classics are appreciated for the fact that it will always be in fashion, while not only decorating any interior, but also hiding the space of the loggia and the room from prying eyes. With well-thought-out dimensions and volumes, the curtain will not interfere with the approach to the balcony window.

If the loggia is small, about 3 meters in size, it is not recommended to use a dense, bulky, dark fabric - this will visually reduce the room. Classic curtains can be made with your own hands, just a little time and diligence.

Types of lifting mechanisms

The lifting mechanism is an important component of the design of the roller blind.

Cloths of street roller blinds are opened and folded either manually or by a special electric mechanism.

There are the following options:

1. Chain system. The lifting of the canvas is carried out using a rope, chain or cord. The rope is thrown over the drum, and then attached to the bottom of the canvas. When the cord is pulled, the roller starts to rotate, raising or lowering the blinds. In order to fix the curtain in a certain position, use clips, garters or other holders. Such designs are valued for their affordable cost and a long period of operation - very reliable systems.
2. Spring. Such a system can be installed both from above and below, and can be attached on both sides.When fastened from the side, fabric with varying degrees of light transmission can be used and the result is a very functional day-night design. The handle installed on the lower plumb line will cope with the function of the chain. In general, the design is convenient, the main drawback is that the springs quickly fail.
3. Electric drive. The undisputed leader in convenience, very easy to use. However, you will have to pay for a high degree of comfort - these are the most expensive designs. The canvas is folded and unfolded by an electric motor, which is turned on by a button or remotely. Most often, such mechanisms are used for panoramic windows, or for high and wide window openings.

In most cases, the rolls are fixed with adhesive tape or magnetic strips.

In case you decide to create rolled ones with your own hands, you will have to be content with a chain control system. More functional spring or electric models are best purchased ready-made. In extreme cases, then you can change the canvas to the one that you like.

Wired electric cornice is the simplest device.

How to take measurements correctly?

The correct determination of the size of future curtains is half the success. First measure the eaves. Its length will be equal to the width of the finished curtain. The length of the curtain can be up to the window sill or up to the floor, depending on your preference.

Now you need to calculate the amount of material needed according to the following scheme:

Add 20 cm to the length of the canvas for hem. In order to determine the width of the canvas, it is necessary to decide how the curtain will be sewn: will it be on eyelets, with drapery, or will it be a smooth canvas.Most often, the drapery factor is two.

When buying material, remember that the remaining trimmings can be used as decoration, but if there is not enough fabric, then you will have significant problems, so it is better to purchase material with a margin.