Orient infrared film heating system

When is an electric boiler the best solution?

Gas is not available to everyone: some settlements are located too far from the highway, and sometimes installing a gas boiler is not at all appropriate. For example, for a country house that is heated several times during the winter, it makes no sense to purchase an expensive set of gas equipment.

Solid fuel boilers also have a number of disadvantages: it is necessary to harvest and store fuel, and most solid fuel units cannot work for a long time, more than 4-5 hours, on one load of fuel. In addition, they are inertial and do not allow precise temperature control. In this case, the electric boiler is able to solve the heating problem quickly, reliably and at no extra cost.

Advantages of electric boilers for a private house:

• easy to install, connect and maintain;
• have a high level of automation;
• allow you to accurately set the desired temperature;
• work silently;
• no need to connect to a chimney;
• do not require a separate room, most household models are mounted on the wall with their own hands.

Flaws:

• require connection to the shield with a separate cable;
• boilers with a power of more than 9 kW are produced only for a three-phase voltage of 380 V;
• due to high electricity tariffs, heating costs several times more.

Infrared warm floors ORIENT in Kharkov Infrared film floors

Description

Orient infrared heating film systems are technologies and solutions of the 21st century for comfortable, safe, economical and environmentally friendly heating. ORIENT STANDART heating film is a flexible radiant film that consists of non-metallic heating elements, which are a conductive layer based on carbon paste and copper current-carrying bars, laminated in an insulator consisting of EVA PET polyester. The range of application of IR film heating systems of the first generation is limited due to the peculiarities of the production technology in which there is no base (fiber) for applying and fixing the radiating component (carbon). Installation requires additional consumables. Supplied in rolls or as required. .ORIENT - LUX Second generation ORIENT - LUX 3-layer infrared heating system.It will solve any problems related to space heating, the range of application is not limited. ORIENT - LUX is a mesh of cotton threads, on which fine particles of homogenized graphite are applied in a special way. After applying graphite and subsequent drying, the network is laminated into a protective base. Can be used as a base of polyurethane and polypropylene. Metal contact wires are woven along the edges of the film sheet. Subsequently, wires are soldered to them, through which the film is connected to the network. There are modifications for the supply voltage ~ 220V, ~ 110V and -24V, -12V. Further, the electric current, passing through the graphite particles, causes them to heat up. Like any heated body, the graphite network begins to emit infrared waves. The particle size of graphite is selected in such a way that the radiation occurs in the range from 8 to 13 microns, which practically coincides with the wavelengths emitted by the sun. According to scientists, solar radiation is the most beneficial for humans and other living beings. Thus, the Orient heating film has an extremely positive effect on health. Due to the fact that the network is placed in a strong base that is resistant to mechanical, chemical and thermal influences, high electrical safety and durability of the final product is achieved. ORIENT - PREMIUM Five-layer universal IR heating system ORIENT - PREMIUM or linoleum flooring. Provides "soft" and uniform heating without temperature "shock" during heating and cooling. The emitting material is applied to closely interwoven synthetic fibers.Does not require additional consumables associated with styling. Supplied in rolls or as required.

You can place an order for "ORIENT infrared warm floors" in the company "Ukrtechelectro, LLC (NPF)" through our BizOrg platform. The offer is currently in the "available" status.

Advantages of "Ukrtechelectro, LLC (NPF)"

• special service and price offer for users of the BizOrg trading platform;

• timely fulfillment of their obligations;

• a variety of payment methods.

Leave a request right now!

Service information

• "Infrared warm floors ORIENT" belongs to the category: "Infrared film floors".

• The offer was created on 09/04/2013, last updated on 10/13/2013.

• For all the time the offer was viewed 3225 times.

Please note that the BizOrg.su trading platform is for informational purposes only and under no circumstances is it a public offer. The price of the product "ORIENT infrared warm floors" declared by Ukrtechelectro, LLC (NPF) may not be the final sale price

For detailed information on the availability and cost of these goods and services, please contact representatives of the company Ukrtechelectro, LLC (NPF) at the specified phone number or email address

For detailed information on the availability and cost of these goods and services, please contact representatives of the company Ukrtekhelektro, OOO (NPF) at the specified phone number or email address.

Housing area

How to save maximum energy? - Use firewood. Joke.But seriously, by the word “save” I don’t mean “freeze”, but reduce electricity consumption as much as possible, but so that the room is warm.

Believe me, it is more profitable to buy 2-3 heaters of different power than one that will pull the whole apartment. Be sure to consider the quadrature of the rooms so as not to overheat and not freeze.

The table is based on a standard ceiling height of 2.5 meters. Therefore, the data is more suitable for an apartment. In the country or in a country house, usually, the walls are higher

Keep this in mind when planning your purchase.

Energy costs depending on the finish coat

When choosing a finishing material for laying on a warm electric floor, it is necessary to have a pictogram on the product, which indicates the possibility of proximity to a heating device. More often, ceramic tiles, linoleum or parquet are laid on floor heating systems.

It is worth noting that the level of electricity consumption of 1 sq m of a warm electric floor is also affected by the finish, or rather its thermal conductivity. If you choose laminate or plank, your heating costs will go up as they have a low degree of thermal conductivity.

But ceramics, linoleum or carpet is an ideal and economically viable material. Surface heating is carried out quickly, and a minimum amount of resource is spent on it.

Installation process

The Orient heating system is mounted to draft ceilings, floors and walls, after which it can be covered with any suitable material.Installation is carried out using special fasteners - for this, there are special mounting sections on the film. It is cut into sections of suitable length strictly along the cut lines. The connection of the Orient heating system to the power source is carried out by soldering - for this there are contact pads. After installation is completed, you can proceed with the installation of finishing coatings.

Everyone dreams of a warm field in winter, and the Orient heating system, having many positive reviews, is able to make such a dream a reality. Having studied a lot of acceptable options, this is the optimal ratio of the "Price - quality" parameters. The Orient heating system is distinguished by a simple principle of operation, its durability and affordable prices. Before choosing heating for your home and making a purchase, it is necessary to study the technical specifications.

Design and principle of operation

The Orient heating system is a thin heating film with nano-graphite strips through which electricity flows. It is laid on floors, walls and ceilings, becoming a source of heat. The principle of its action is borrowed from nature itself, or rather, from the sun. Our natural luminary does not heat the air, but the surface of our planet, with the help of infrared radiation. The surface of the planet begins to give off heat into the air. That is, direct heating of the air is not observed here.

Classical heating systems, unlike the Orient film, work on the principle of heating air masses. The boiler heats the coolant, which is sent through pipes to the radiators, where it gives off its heat to the surrounding air masses. And only a tiny part of the thermal energy is transformed into infrared radiation and heats the surrounding objects.

The Orient heating system operates on a solar type. This is a truly unique film material for home heating. Unlike traditional radiators, which in most cases are installed under window openings, Orient heating film is placed under floor coverings, mounted on ceilings and even on walls. From above it can be decorated with any materials. Here's what happens when electricity is applied:

Mounting the IR film is a breeze. This does not require special skills and special tools.

• Electricity is supplied to the resistive elements of the film;
• The film is heated to a temperature of + 40-45 degrees and begins to emit infrared rays;
• Reaching nearby objects, it heats them, forcing them to give off heat.

Nearby items and surfaces are floor coverings, ceiling materials, wall cladding, furniture, and more.

The Orient heating system is a film infrared heater, which is a kind of sandwich of several layers. The working layer is a graphite coating with resistance to electric current. On both sides, it is closed with protective layers, forming a product ready for installation and operation. For connection to the mains, special contact groups are provided here - conductors are soldered to them.

After starting the Orient heating system, the temperature in the rooms begins to rise rapidly. The heating system in the first minutes and hours operates continuously until the set temperature is reached, which is monitored by a connected room thermostat.Electricity consumption is at its maximum at this time, and heat energy for heating is released in large quantities, since the Orient heating film must completely warm up the room.

After a while, the heating turns off and goes into standby mode. As soon as the temperature sensor detects a decrease in temperature, the film will be energized again. And this will happen around the clock. Warming up the house, the Orient heating system will consume a minimum amount of electricity, since literally every element of the interior will become an independent heat accumulator.

According to the manufacturer, the Orient heating system consumes electricity in support mode literally 10-15 minutes per hour. In the remaining time, the film is in a de-energized state.

Heating film ORIENT

Buy ORIENT Heating Film in other cities

Electric heated floors in a screed up to 2.7m2 - 270W 18m. Warm solutions from Teplokabel-Chelyabinsk

Underfloor heating under laminate 16.0m2 - 2560W. Warm solutions from Teplokabel-Chelyabinsk

Large selection of products from TechSoftTorg. Only sales directly from the manufacturer. TechSoftTorg specialists are always ready to advise you.

Film heating system or underfloor heating

A winning offer on the Kyiv market. We will deliver all your purchases for free. Everest Trading House specialists are always ready to advise you.

DOUBLE!! Heating mat 0.5 x 10.0 m (5.0 m2), wire length 62.5 m. Mat power 750 W.

Electric heated floors in a "screed" for an area up to 4.6m2 - 510W 9m. Warm solutions from Teplokabel-Chelyabinsk

Underfloor heating and anti-icing systems ArnoldRak made in Germany

The unique properties and high quality of our product allow not only dry installation under laminate, carpet, parquet or board, but also under tiles, tiles and porcelain stoneware, using tile adhesive.

infrared floor

Buyer Tips

When choosing an electric boiler for heating a private house, you should pay attention not only to reviews and electricity consumption, but also to other parameters. 1. Mounting method

In an apartment or in a private house of small size, it is optimal to install a wall-mounted boiler. They look aesthetically pleasing, neatly fit into the interior of the home, and at the same time are able to produce a significant temperature. As for the floor options, they can be attributed to industrial or semi-industrial models. These are units for large households with a power of 24 kW.

Mounting method. In an apartment or in a private house of small size, it is optimal to install a wall-mounted boiler. They look aesthetically pleasing, neatly fit into the interior of the home, and at the same time are able to produce a significant temperature. As for the floor options, they can be attributed to industrial or semi-industrial models. These are units for large households with a power of 24 kW.

one.Mounting method. In an apartment or in a private house of small size, it is optimal to install a wall-mounted boiler. They look aesthetically pleasing, neatly fit into the interior of the home, and at the same time are able to produce a significant temperature. As for the floor options, they can be attributed to industrial or semi-industrial models. These are units for large households with a power of 24 kW.

2. How to connect to the mains. Economical electric boilers of low productivity are plugged into a regular 220 V outlet. But for units of medium or high power, it will be necessary to lay a three-phase 380 V network. A conventional 220 V network will not pull such a load.

3. Number of connections. Here is the standard classification: single-circuit and double-circuit models. The first ones are exclusively for heating, the second ones also heat water for plumbing.

4. And yet the main indicator is performance. It determines the consumption of electricity and the heating area. Standard minimum - 100 watts per square meter

Pay attention to this point: the worse the thermal insulation of your house, the more power the boiler will have to buy, and, accordingly, you will have to pay more for electricity later.

A few more guidelines. In terms of current strength, it should be limited to a maximum of 40 A. Electric boiler nozzles - 1 ½ ″ or more. Pressure - up to 3-6 atmospheres. Mandatory power adjustment function - at least 2-3 steps.

Be sure to take an interest in the quality indicators of the local power supply - if the voltage drops to 180 V in the evenings, the imported model will not even turn on.

Before buying an electric boiler for 10-15 kW and above, find out if the transformer from which the house is powered will pull.And then you will have to lay an additional line to your estate.

As for specific models, the most popular are imported, as they provide high performance with minimal power. Among the most bought, according to sellers, are:

• wall-mounted, single-circuit Tenko KEM, 3.0 kW / 220V, cost around $ 45-55;
• wall-mounted, single-circuit UNIMAX 4.5/220, cost $125-200;
• wall-mounted, single-circuit Ferroli LEB 12, 12 kW, price - $ 350-550;
• wall-mounted, single-circuit Protherm Skat 9K, 9 kW, cost $510-560.

Heating with infrared film

Most buyers, before buying film heating, try to calculate whether such an acquisition will be expensive or cheap with delivery and monthly energy consumption. Heating with infrared film is always an additional cost for the purchase, operation of the structure, but the heat in the apartment is provided. On the official website, you can study not only rating models, but also take part in the promotion, make a purchase on sale.

IR film is distinguished by its versatility, since it can be mounted on walls, floors, ceilings. control of the operating temperature allows you to independently turn on and stop heating. Carbon strips are quickly mounted, heat up productively and also cool down. The design is great for the room, bathroom and balcony, creates a feeling of warmth and comfort.

The essence of the Orient system

How does the Orient infrared film heating system work? To begin with, it should be explained that this electric heater consists of a thin heating film coated with nano-graphite strips. Electricity flows through these lanes.The film should be laid on the floor, on the ceiling, on the walls - and then it will become a source of heat.

Everyone from the course of physics knows that the Earth does not heat up as a result of direct air heating. The fact is that the sun does not heat the air at all. The sun heats the surface of our planet with the help of infrared radiation (IR), and the surface of the planet, in turn, gives off heat into the air. This feature favorably distinguishes the Orient heating system from other heating systems. The fact is that other heating systems are trying to heat the air around them (the principle of heating air masses, or, scientifically, convection). Of course, this is difficult, inconvenient and ultimately not doomed to failure.

A simple scheme - a wall-mounted heating boiler heats the coolant. The coolant moves through the pipeline to the radiator, and there it gives off its heat to the surrounding air masses. For a long time. Difficult. Extra connections. Consumption is unprofitable. An incredible amount of heat is simply wasted, not reaching your apartments. Only a critically small percentage of heat energy is transformed into infrared radiation, which allows it to heat various surrounding objects.

Orient is perfect for heating a private house or apartment of any footage.

Is it expensive to heat a room with a UFO system?

1. When using a heater, you are deprived of the ability to control the temperature; as you can see in the animation, the heater first heats the upper part of the room, after which the movement of cold air begins in the lower part of the room; in addition, the heater burns oxygen. In order to heat the room up to 20 ° C, the heater consumes much more energy.
2. Electric floor heating systems.As you can see in the animation, the temperature starts to drop from the floor to the ceiling. With this system, you also cannot control the temperature. In addition, the installation and operation of such a system requires significant funds, so its use in many cases is impractical.
3. When using an infrared system, unlike other systems, heating occurs from top to bottom. Heating is directed, heat is directed to where it is needed. After turning on the heater, full heating starts after 27 seconds. This significantly reduces operating costs. Additional savings are made possible by using the temperature control thermostat installed on the appliance. Let's give two examples. These are rooms that are difficult to heat. When heating a closed room of a workshop with an area of ​​1000 m2, with a ceiling height of 5 m and significant heat losses, the installation of the UFO system will cost 20-50 times cheaper, and its operation will cost 10-30 times cheaper. When heating religious buildings, depending on the characteristics of the building and the specifics of the system, installation will cost 50-100 times cheaper, and operating costs, if used appropriately, will decrease by 100-150 times.

What is PLEN heating

And, finally, some information about Orient's competitor called PLEN. PLEN is an abbreviation that stands for film-radiant (infrared) electric heater. This heating device consists of two layers of flexible plastic, and between these layers there are carbon resistors.

In order to run the PLEN, no additional communications are needed, except for power supply. Installation of the system by professional workers takes 2-3 working days.

This heating system is quite reliable, and, according to advertising, can last longer than 50 years. She is not afraid of sudden power surges, as well as temporary power outages. PLEN fireproof and even seismic resistant

Nevertheless, it is better to be careful once again and not install PLEN in a wooden house. It works on the principle of self-regulation and is able to independently maintain the set temperature.

The content of dust in the air is reduced due to the absence of a convention - the movement of air currents in the air.

PLEN can be wall-mounted, ceiling-mounted, floor-mounted and some other models. The cost of this system varies depending on the region, company, room installation and quality. It is better to choose proven models.

COP coefficient and air conditioner efficiency

However, the possibility of operating at low negative temperatures is not the main thing. What else should be emphasized when choosing an inverter air conditioner, so that its work creates a sufficient amount of heat in the house and at the same time is profitable?

The COP (Coefficient of Performance) coefficient is responsible for this - the coefficient of efficiency or conversion. It can be found in the full list of characteristics.

COP is the ratio of the heating output of an air conditioner in heating mode to its electric power, that is, to how much electricity it consumes from the outlet.

What COP value is considered good? For the best models, it reaches 5 units. From 3.5 to 4.0 these are average parameters.

For example, cop=3.61 means that with a power of 1 kW, such an inverter is capable of pumping a thermal power of 3.61 kW into the room in 1 hour.

A similar parameter when working for cooling is called the coefficient. EER. It shows how much heat power is pumped out of the room in accordance with the spent electric power of the air conditioner.

The more COP, the more profitable and more expensive the air conditioner. As mentioned above, a good value is COP=5.0. Having such a device, having spent one kilowatt of electric energy in 1 hour, you will drive 5 kW of heat into your room.

How beneficial is it? At current prices for electricity, 1 kW of heat when heated by such an air conditioner in Moscow or the region will cost you about 1 ruble.

In some regions, the costs will be one and a half times less. It seems to be even cheaper than heating with wood, not to mention heating with other electrical appliances.

But here lies the main trick. The COP parameter specified in the technical documentation is measured under some ideal conditions. And specifically - when working for heating with an ambient temperature of + 7C.

As the outside temperature drops, the COP will decrease, just as it does when the room temperature rises. If the best Japanese inverters have COP of 5.0 at outdoor temperature t = + 7C and room temperature + 20C, and you want to fire up the room to + 30C without changing the street parameters, COP will immediately drop to 4.0-4.5.

And if it gets colder outside, then this parameter will drop much more. In frosts of -25C, for branded “Japs”, the COP is kept within 1.5-2.0. That is, the efficiency drops by half.

So what, you say.It is still more profitable and cheaper by 2 times than heating with an oil battery or a convector. Actually not quite like that.

Why is it needed and where is it used?

• Electric heating systems based on a quartz heater are used in residential premises, cottages and country houses where gas is not supplied or the installation of boiler devices is costly. The technical characteristics of the tepleco quartz heater allow it to be used in addition to a diesel, wood or coal system and to a Russian stove. Today, quality installations from the manufacturer are the best alternative to all heating systems. Another area of ​​​​use is to maintain the necessary temperature indicators during the absence of people in a room where it is necessary to maintain heat.
• The devices are perfect for heating the basement, warehouse, construction site, office space and other types of real estate.
• Many medical institutions use high-quality heating systems, which are also bought for museums, exhibition halls, organizations that operate buildings with many utility rooms.