Overview of the Philips FC8776 robot vacuum cleaner: cleaning without dust, noise and overpayments

Comparison with competitive models

It is easy to understand that expensive models, the cost of which is 30 thousand rubles. and higher, more functional and in many ways outperform the budget ones. In this regard, let's compare Philips brand vacuum cleaner considered modification of SmartPro Easy with representatives of the price category from 12 to 15 thousand rubles. We will compare robotic devices that perform both dry and wet floor processing.

Competitor #1 - Genio Profi 260

At the disposal of potential owners will be a robot operating in 4 different modes. The device is able to collect liquid, wipe the surface with a damp cloth. Without recharging, the device “works” for 2 hours, after which it returns to the charging station on its own to receive a fresh portion of power supply.

A virtual wall is used to mark the cleaning area. From the consequences of an accidental collision with walls and furnishings, the Genio Profi 260 is protected by a bumper made of soft shock-absorbing material. To transfer the start of work, the unit is equipped with a timer, there is a clock on the front panel. The vacuum cleaner can be programmed to turn on on the days of the week.

The control uses a touch panel and a remote control. For convenient monitoring of operating parameters in the dark, the display is backlit. The device accepts voice commands. The capacity of the dust container is 0.5 l, the LED indicator signals when it is full.

Competitor #2 - iBoto Aqua X310

The robotic cleaner model offers four different modes. Without recharging, it can fight dust on the floor for a full 2 ​​hours. The depleted charge will force the device to return to the parking station, to which it rushes without the help of the owners.

To collect dust and fill with water, two containers are placed inside the iBoto Aqua X310. The volume of both the dust collector and the water tank is 0.3 liters. The front panel contains basic tools for controlling the robot. You can program it to activate by the days of the week, you can control and change the mode using the remote control.

According to the owners of the device, this is a more reliable option in operation.

Competitor #3 - PANDA X600 Pet Series

One of the most popular models of robotic cleaning equipment

The PANDA X600 Pet Series unit attracts attention with good power, a capacious battery and versatility - the robot copes with dry cleaning and washing the floor

The model provides the ability to program a cleaning schedule for a week, there is a cleaning zone limiter, a display, a UV lamp for surface disinfection and a soft bumper. To detect obstacles in the way of the device, infrared sensors are mounted in it.

The volume of the dust container is 0.5 l, the container is equipped with a HEPA filter that provides effective cleaning of the outgoing air stream from dust.

A large number of reviews indicate the demand for PANDA X600 Pet Series. Most buyers note the good quality of cleaning hard surfaces, the robot copes worse with cleaning carpets. Sometimes they note problems with finding the base, the duration of the battery charge.

Comparison with competitor models

Of course, the popularity of robots has also affected the range of other manufacturers. Similar models are produced by iRobot, Clever & Clean, Samsung, Neato, and the first brand is a pioneer and leader in the field of robotics. Consider models with approximately similar functionality, designed to perform dry cleaning.

Competitor #1 - iRobot Roomba 681

The model is designed for dry cleaning. To perform work, it is equipped with a Li-Ion battery; upon completion of the charge, it independently returns to the base to restore the energy resource.

iRobot Roomba 681 control tools are located on the front side of the device, as an option a remote control can be attached. The zone limiter for processing is a virtual wall.To minimize the consequences of an accidental collision with obstacles, the unit is equipped with a soft bumper.

The capacity of the dust container is 1 liter, so it is not necessary to empty it after each session. This automatic cleaner model can be programmed to clean on specific days.

Competitor #2 – Xiaomi Mi Robot Vacuum Cleaner

This model produces dry cleaning in several different modes. It can move in a straight line and along a zigzag path, perform cleaning operations in a limited area and quickly process a large area. The capacity of the lithium-ion battery is almost twice that of the previous model.

The battery of Xiaomi Mi Robot Vacuum Cleaner works for 2 hours 30 minutes, when the charge is depleted, the smart device returns to the parking lot without the participation of the owners. To fix obstacles, the robot is equipped with infrared and ultrasonic sensors, the total number of which is 12 pieces. The distance is determined by a laser sensor.

If the vacuum cleaner gets stuck in a position from which it cannot get out on its own, the unit emits a signal sound. It also alerts you when the battery is low. To perform cleaning by the days of the week, you can draw up a map, the device is integrated into schemes smart home control”.

Competitor #3 - PANDA X500 Pet Series

The robotic vacuum cleaner is used in dry cleaning of the floor, it “perfectly” copes with pet hair and persistent, hard-to-clean floor dirt. Suitable for processing all currently existing types of floor coverings.

The dust container of the PANDA X500 Pet Series model is only 0.3 l, but an LED indicator warns of its fullness.A soft bumper protects against impacts in case of possible collisions with furnishings.

The model is equipped with speech functions, but warnings and alerts are pronounced in English.

Advantages and disadvantages

The functionality of the device allows you to determine its main advantages. These include:

• Compact dimensions allow you to clean under low furniture.
• The Philips FC8710/01 robot vacuum cleaner is able to recognize heavily soiled areas and clean them more thoroughly.
• The presence of a wide nozzle. Philips with a wide nozzle increases the efficiency of cleaning, due to the fact that it follows the contours of the surface to be cleaned as much as possible.
• A powerful battery allows you to clean the room up to two hours, while the time to charge the battery has significantly decreased compared to its predecessors.

If we consider the Philips FC8710 from the negative side, then it is worth highlighting one point: the installation of scheduled cleaning is possible only for the next 24 hours, then it must be reinstalled again. Such a minor flaw does not interfere with the quality work of the product. In addition, you can find reviews that the robot gets confused in the wires. But this moment is also easily solved by first cleaning the room from various cords. Otherwise, this robot vacuum cleaner will become indispensable when cleaning an apartment or house and will facilitate the work of its owners, saving time for more pleasant activities.

Finally, we recommend watching a video review of Philips SmartPro Compact FC8710/01:

Analogues:

• iRobot Roomba 681
• iClebo Pop
• Xiaomi Mi Robot Vacuum Cleaner
• PANDA X900
• E.ziclean Tornado
• Philips FC 8776
• Polaris PVCR 0926W EVO

Brush not spinning

The vast majority of robotic vacuum cleaners are equipped with one or two side brushes. And some models have a turbo brush. Not surprisingly, one of the types of malfunctions is precisely the breakdown of the brushes. If your side brush does not work, or the turbo brush does not rotate, then most likely they are simply clogged with dirt, dust and wrapped too much wool and hair. For the same reason, the device may fail one wheel, or both wheels at once. Therefore, panicles and wheels must be periodically carefully disconnected and thoroughly cleaned. If you notice that the device is too noisy during operation, then most likely you have incorrectly installed the brushes back.

The reason why the brush does not spin

If, after cleaning, the left brush or the right brush still does not work, then the problem is much more serious. It is possible that the side brush motor has broken, or the gearbox has broken. In this case, we recommend that you contact a specialist and do not try to fix the problem yourself.

The video below clearly shows what to do if the brushes on the iRobot Roomba do not spin:

Advantages and disadvantages

Philips FC8472 has a number of advantages, which include:

• effective cyclone technology for air purification from pollution;
• ease of use of the vacuum cleaner;
• compactness and maneuverability of the model;
• high build quality;
• sufficiently high suction power.

The lack of a carrying handle is also considered by many to be a disadvantage of the model. But, given the cost of the device and performance characteristics, you can put up with such a minus.

Some reviews note that the universal nozzle quickly fails during active use. And this is an additional cost for buying a new one. In addition, the model does not have a power regulator.

Similar models

The closest competitor of the model in question is the Samsung SC5251 vacuum cleaner. It has similar technical characteristics of suction power and performance, and is cheaper than Phillips.

Of the additional functions - the presence of a power regulator and an indicator of filling the dust container. But unlike the Philips, the Samsung is baggy, meaning it has a traditional trash bag that's far from as easy to clean.

In addition, the Korean vacuum cleaner has a higher noise level during operation (84 dB), and it weighs 1 kg more. As for the equipment, Samsung has a high-quality turbo brush. But the Philips universal nozzle described above is not inferior to it in terms of functionality and ease of use.

In terms of compactness, Philips can compete with the Thomax Aqua-Box Compact. But in terms of technical indicators, they are not very similar. Their dimensions are almost the same, the power consumption of “Thomas” is more than 200 W, but at the same time it weighs as much as 8 kg. In addition, this is a model with a wet cleaning function and a water filter.

Equipment

Let's start with an overview of the package. The accessories include:

1. The robot vacuum cleaner.
2. Charging base.
3. Power adapter.
4. Remote control.
5. Side brushes (3 pcs., of which 2 are spare).
6. HEPA filter (3 pcs., of which 2 are spare).
7. Microfibers for wet cleaning (2 sets, 1 of them on the robot and 1 spare).
8. Bottle for filling the reservoir.
9. Nozzles (4 pcs, 2 of them are spare).
10. User manual.

Equipment Hobot

The manufacturer took care and added batteries to the remote control, so there is no need to buy them separately

It is important to pay attention to the fact that the charging base is equipped with a special wall mount so that the robot vacuum cleaner does not move it during cleaning or when returning to the base. It seems to be a simple solution, but we have not observed this with other manufacturers

Unfortunately, there is no traffic limiter in the kit.

Functionality

To ensure high-quality cleaning, the robot has a three-stage cleaning system:

• A pair of long side brushes helps to collect dust in the corners and baseboards, remove dirt adhering to the floor, directing it to the suction channel.
• Thanks to a rather high suction force (600 Pa), the robot vacuum cleaner removes dried dirt and directs it through the suction hole into the dust collector.
• A special cloth, attached to the bottom of the Philips FC8796 SmartPro Easy, allows you to clean the floor, and when it is moistened, carry out a wet wipe.

Wet mopping the floor

The modern UltraHygiene EPA12 filter allows you to capture more than 99.5% of the finest dust and filter the exhaust air. Therefore, the dust can remain in the container, which eliminates the release of pollutants into the air.

The Philips FC8796 SmartPro Easy robot vacuum cleaner is equipped with Smart Detection 2 technology, which is a system of intelligent sensors (23 units) and an accelerometer. This system provides the device with autonomous cleaning: the robot is able to analyze the situation and select the optimal mode for the fastest possible operation. The device does not get stuck in one zone and goes to the charging base itself if necessary.

Cleaning under furniture

Overview of robot vacuum cleaner modes:

• standard - the mode of automatic cleaning of the space by the device (the entire available cleaning area), which is a given sequence of two other modes: bouncing and cleaning along the walls;
• bouncing - the robot vacuum cleaner cleans the room, making arbitrary movements in a straight line and crosswise;
• along the walls - Philips FC8796/01 moves along the baseboards, providing high-quality cleaning of this area of ​​the room;
• spiral - the robot cleaner moves in an unwinding spiral path from a central point, which allows for a thorough cleaning of this area.

The last three Philips FC8796 SmartPro Easy modes act as separate ones, they are launched from the corresponding buttons on the remote control. In addition, the robot has the function of planning a cleaning schedule for the day, which allows you to plan for the next 24 hours.

Video review of the model:

Instructions for use and care

The considered models are high-tech, therefore they are not recommended for use without studying the operating rules.

Philips models, in addition to the cardboard packaging, are also sold in a protective film, it is recommended to remove it. Turning on and off devices in most cases is possible with one key - "Clean". Possible modes of operation will be signaled by indicators that are activated after each press. For example, in the language menu, the desired language is selected, in the mode menu - the desired functionality for work.

For initial use, the automatic mode is recommended, which does not require special knowledge in settings.

When using a robot vacuum cleaner, do not forget about safety precautions:

• do not sit or stand on the operating vacuum cleaner;
• do not spill liquids on the robot, but wipe it with a slightly damp cloth;
• do not remove explosive substances using automation;
• electrical cables, sheets of paper, unstable objects can interfere with the movement of the robot;
• exclude the access of the robot to the balcony;
• When the automation is idle for a long time, remove the battery.

The order of cleaning can occur in the following modes:

• spiral (from the middle of the room);
• intersection of the premises in different directions;
• contamination detection;
• local mode.

The time it takes the appliance to clean may vary. It is associated with pollution and accessibility of the programmed area.

Care of the robot should be carried out with the end of the cleaning cycle. The following instructions are especially recommended:

• cleaning the dust collector - it is removed with one press of the locking key;
• filter cleaning is one of the dust collector compartments;
• filter replacement - if the robot is operated daily, then after three months.

Can't see base

It also happens that the robot vacuum cleaner does an excellent job with all functions, cleans cleanly and efficiently, but hardly returns to charging or does not find the base from time to time.

To figure out why the robot does not go to the base on its own and finds it poorly, it is necessary to carry out a number of the following activities:

1. Make sure you remove the protective film from the infrared panel of the docking station. Check that the sensors are not covered or dirty, and that there are no foreign objects on the bumper.
2. Visually inspect the docking station and cord for mechanical damage.
3. In some cases, the robot vacuum cleaner cannot enter the base due to the fact that the cleaning process in normal mode was started not from the base, but from another area of ​​the room.
4. If the robot vacuum cleaner does not see the base, then it is not necessarily broken. It is possible that the docking station is simply not installed correctly. Make sure that there are no obstacles within half a meter on either side of the base and select the most optimal location for its placement in accordance with this requirement.

Philips fc8776/01

The Philips fc8776 robot vacuum cleaner is a compact and ultra-slim device that can get under the lowest furniture. The vacuum cleaner makes an independent overview of the room and determines the level of contamination. Using the received data, the sample itself chooses the type of cleaning. The vacuum cleaner has 4 main modes:

1. auto;
2. chaotic;
3. in a spiral, used for a specific contaminated place;
4. along the walls.

Characteristic

Noise level	58 dB
Waste bin volume	0.3 l
Battery	2800 mAh
Price	19990

pros

• Comes with replacement filters
• Compact size

Minuses

• Missing virtual wall
• Small dust container
• Difficulty overcoming obstacles

Philips fc8776/01

Possible malfunctions and their causes

One of the frequent malfunctions of the device is the inability to detect the base. The robot and the charger are both a receiver and a transmitter. The correctness of the orientation depends on the signal strength. The vehicle cannot return to base if the signal is weak or non-existent. The most common reason for this is the presence of a film on the battery, which is recommended to be removed even according to the instructions.The film interferes with the signal. The same hindrance can be a layer of dust on the bumper of the robot.

If there is no signal on only one of the devices, you should suspect a break in the power cord that is connected to the base or a breakdown in the case. The last reason can be found with a detailed examination of the device. It is also worth considering the beginning of work precisely from the point of the base. If the automation starts from other coordinates, it may not remember the location of the charger. Many stations work better when they are away from the surroundings. The recommended distance is about half a meter.

Another of the most common violations is improper battery charging. The battery will drain faster on a unit that has been in use for more than two years. A bad charge can also be observed in a new unit. Battery life is usually indicated in the passport. If it is worn out, the part must be replaced. Poor contact between the station and the device is eliminated by cleaning the contacts, for example, with an ordinary school “washer”.

Another reason may be hidden in the malfunction of the board. But you can’t fix it yourself, the device will have to be taken to a service center. Due to a full garbage bag, the efficiency of the unit is often reduced.

Orientation problems

Orientation of the robot vacuum cleaner in space is based on the functioning of the navigation unit. In budget models, it usually consists of side obstacle sensors and anti-fall sensors. In more expensive models, navigation is carried out thanks to laser rangefinders and the built-in camera.These elements tend to fail, after which the robot vacuum cleaner often does not see obstacles, twitches, stops in the middle of the room, works for half an hour and leaves for the base, drives only in a circle in one place, backs up, etc.

When the device constantly travels in circles in one place and does not orient itself in space at all, this may indicate a malfunction of the side obstacle sensors.

Location of sensors

If the device stops abruptly during operation and beeps, then the problem may be in the failure of the battery, the failure of the navigation unit, or in a simple entanglement in wires and other foreign objects on the floor.

The malfunction in the form that the robot vacuum cleaner simply rides backwards when cleaning, or rides backwards and turns off, can be eliminated by removing the front wheel and cleaning it from dirt. It can also be in sensors that need to be cleaned of dust, or to replace failed LEDs. If this did not help you, and the vacuum cleaner also only goes backwards, the problem is probably in the device board.

Also, the reason may be in a poor-quality assembly. For example, some screw was not screwed at the factory, as a result of which it got into the mechanism and contributed to overheating of the motors. The video below clearly shows how to repair the iLife robot vacuum cleaner if it backs up and turns off:

The subfloor is the weak point of most automated cleaning robots. From almost every user, you can hear that their robot vacuum cleaner does not work on a black floor and does not see dark furniture, it constantly crashes into it. Also, the minimum number of products is able to navigate in the dark.This feature of smart vacuum cleaners cannot be called a breakdown; rather, it is more of a drawback of all robotic devices.

Main technical characteristics

Model FC 8776 collects dust by vacuum filtration, in other words, sucks directly from the floor, passing air through the fibrous pad during cleaning.

This simple method of collecting dust is due to its compact size - a more complex system would be difficult to implement, given the physical characteristics of the device.

The vacuum cleaner, despite its compact dimensions, has several cleaning modes:

• random (automatic) or with the choice of the trajectory of movement;
• with time setting or until the battery is completely discharged;
• delayed start with a maximum interval of 24 hours;
• the cleaning process starts immediately after charging;
• cleaning of limited space - local.

The speed of movement is not indicated by the manufacturer, since it is quite difficult to calculate it - this indicator depends on many factors, including the type of flooring and the degree of pollution.

Image gallery Photos from

How long does it take to recharge

Noise level during operation

Vacuum cleaner battery life

Power consumption model FC 8776

Indicators for charging, turning on and filling, installed in the vacuum cleaner, help to switch the device from one mode to another in time or clean it.

The manufacturer is proud of its brand and considers the height of 6.1 cm one of the main structural achievements. But to make sure the compact device works for you, be sure to measure difficult-to-serve areas in your home.

Size chart for model FC 8776 to help you determine if the vacuum cleaner will really work for your apartment.The warranty period and country of manufacture are also indicated here.

The vacuum cleaner is oriented in space using an IR sensor, so it is important to monitor its serviceability. The manufacturer took into account that everyone is accustomed to remote control, so he equipped the device with a remote control: on the spot, you can change the operating mode or simply turn off the device

What to look for when choosing a robot?

Today, the Dutch manufacturing company Philips is one of the market leaders in the niche of home appliances. Every person who has come across the products of this brand at least once in his life notes their high quality, durability and reasonable cost. Philips vacuum cleaners are no exception.

The range includes models of the most diverse price categories. This allows each buyer to choose an option for their needs and wallet.

Yes, the company's segment of robotic household appliances is only developing now and a small number of models are presented in the catalog. But some of them are already in great demand.

This is not surprising, because Philips robotic vacuum cleaners confirm the reputation of the brand according to the reviews of users who managed to acquire an automatic device for cleaning the house.

Most buyers note the excellent build quality, the correspondence of the actual parameters of the product to those stated in the passport, the ease of control and maintenance of the robotic assistant.

Pros and cons of brand robots

Absolutely any technique has both its advantages and disadvantages. Also, the devices have different functionality. Therefore, before making a purchase decision, it is necessary to find out as much information as possible.

Some people are ambivalent about cleaning robots.But their opinion can be changed if you give a list of the advantages of such devices.

The main advantages of robotics:

1. Autonomy. Cleaning of the premises is carried out in a fully automatic mode, without the presence of a person.
2. Quality. The robot carefully cleans every corner and collects all the debris without missing anything.
3. Cleaning at any time. You can set a program for the device and send it to work at any convenient time. For example, you can run it while leaving for work. Agree that returning to a clean apartment is nice.

At the same time, the entire device has a rather modest height, which does not exceed 13 cm. Therefore, it will not be difficult for him to climb even into the farthest corners of the room and carry out high-quality cleaning.

Among the minuses, one should highlight the fact that in certain places of the room, for example, in the corners or any narrow spaces, the robot cannot collect dust.

This is due to the round shape of the case. Therefore, in some cases, the device still needs help.

So that after cleaning with the help of a robot there are no stains, before setting the program, it is necessary to remove all possible wires and small furniture from the path of the device

It is also worth noting that after each cleaning it becomes necessary to clean the brushes and the dust container. You don't always want to do this. But you can simplify the cleaning of the dust container if you purchase a model with a vertical container. In this case, accidentally scattering the collected garbage will definitely not work.

The principle of operation and features of operation

Robotic equipment can be configured according to such parameters as the number of cleanings and time.At the same time, the device independently draws up a movement plan and the battery charge level, if necessary, approaching the base and charging.

Its principle of operation is to collect small debris using brushes. All dust is stored in a special tank.

As a rule, there is a paddle brush in the design, which directly cleans the floor, as well as two shafts rotating in opposite directions, raking the debris into the container. A vacuum cleaner is used to collect the remaining dirt.

A special filter is also built into many modern models. It purifies the air leaving the device and keeps all kinds of dust and dirt particles.

A good choice would be products equipped with a detergent spray function. They can be used for wet cleaning of laminate, ceramic tiles, carpet, linoleum and other types of flooring.

Advantages and disadvantages

To summarize, here is an overview of the pros and an overview of the main disadvantages of the Philips FC8796 SmartPro Easy robot vacuum cleaner.

Advantages:

1. Slim body in an interesting color scheme.
2. Several different cleaning modes.
3. Three-stage cleaning system.
4. Smart Detection Technology.
5. UltraHygiene EPA filter.
6. Schedule cleaning for 24 hours.

Flaws:

1. The accessories do not include a motion limiter.
2. Small capacity dust collector.
3. Low suction power.
4. The robot does not perform well when working with carpets (this can be confirmed by a test).
5. No weekly schedule planner.
6. No smartphone control.
7. Does not build a room map.

This concludes our Philips FC8796/01 review. In general, the model is quite interesting and deserves attention. If you want to choose a slim robot vacuum cleaner for dry and wet cleaning, while the budget is limited to 20 thousand rubles.rubles, this model will be one of the best! However, consider the disadvantages provided, because. some similar models have far fewer flaws at the same price.

Analogues:

• Xiaomi Mi Robot Vacuum Cleaner
• iBoto Aqua V715B
• iRobot Roomba 681
• iClebo Pop
• Philips FC8774
• REDMOND RV-R500
• Xiaomi Xiaomi Roborock E352-00

Functionality

The Philips SmartPro Active FC8822/01 is a highly efficient, smart robot vacuum cleaner with all the features you need to get the job done right. This model features a unique TriActiv XL wide nozzle that doubles floor coverage in one stroke and a 3-stage cleaning system for efficient cleaning.

Floor cleaning efficiency

The cleaning technology of the robot vacuum cleaner is as follows:

1. First, two long side brushes rake up the debris in the center, which enters the dust collector through the nozzle.
2. The air chute and scraper ensure that debris is picked up across almost the entire width of the Philips robot thanks to the built-in high power motor.
3. The removable panel with a napkin helps to remove even the finest dust.

Three suction holes collect dust from three sides. The design of the dust collector is also well thought out, which can be easily removed and cleaned.

Phillips Robot

The manufacturer of the Philips FC8822/01 model has provided several modes of operation:

• Automatic, with a time limit, or until the battery is completely discharged, at which SmartPro Active independently chooses the trajectory of movement.
• Manual, in which the movement algorithm of the robot vacuum cleaner is set manually using the remote control.

In automatic mode, the robot uses a fixed sequence of cleaning programs (motion algorithms): zigzag, random, along walls, in a spiral. The test of the operating modes of the device showed that, having completed the execution of this sequence of programs, the robot vacuum cleaner again cyclically repeats them in the same sequence until the battery is completely discharged or turned off manually.

Thanks to the dust sensor, the machine detects areas with heavier dirt and automatically switches to the "spiral" program and increases suction power, including turbo mode for more thorough cleaning.

Philips makes the choice of the most optimal cleaning mode on its own, having previously analyzed the situation in the room thanks to the innovative Smart Detection program, which consists of a system of 25 intelligent sensors, as well as a gyroscope and an accelerometer. 6 infrared sensors determine the location of obstacles in the form of walls, cables, etc., which allows the device to avoid collisions with them. On the lower part of the case there is a sensor for detecting changes in height, which is sensitive to its change and prevents falling.

The robot vacuum cleaner is highly manoeuvrable, and the well-thought-out wheel design allows it to easily overcome obstacles up to 15 mm high.

Additional Philips FC8822/01 features:

• Scheduled mode. It is enough to set the time and day of cleaning with the buttons on the base and Philips will carry it out on its own in the absence of a person.
• A special device - a virtual wall, included in the delivery package, will help organize cleaning spatially.The limiter creates an invisible barrier that the robot cleaner cannot cross, thereby limiting the room space needed for a more thorough cleaning.
• Cotton detection. To implement this function, a built-in microphone is used. If the vacuum cleaner gets stuck and stops due to an error, the user can determine its location by the cotton, on which the device emits a beep and flashes the indicator.
• Remote control of the robotic vacuum cleaner. Using the remote control, you can turn on, stop and direct the robot to the desired location, change the trajectory of its movement, send it to the charging station.

virtual wall

Pros and cons in owner reviews

The premium model Philips FC 9174 stands out with a considerable price tag, which did not affect the demand among buyers. Such a success of this vacuum cleaner was ensured by optimal performance, well-thought-out equipment and accessories made at the highest level.

Consider the main advantages highlighted by the owners:

• just cosmic thrust;
• strong and comfortable brushes;
• the noise level is quite low;
• use conveniently;
• assembling / disassembling the vacuum cleaner is simple;
• care is minimal.

A special advantage is an incredibly powerful thrust, although the device makes no more noise than weaker competitors.

Users like that preparing equipment for work takes no more than a minute, and all accessories are easily, but securely, fixed. Movable nozzles are installed on the hose and brushes, providing convenience during the cleaning process

As for the cons, here the owners of this model indicate the following features:

• thin power cord;
• weak automatic winding mechanism;
• weak fastening of the rollers on the 3-in-1 brush, which threatens with possible breakage;
• only one option for a dust collector - a bag;
• the need to regularly buy consumables - disposable bags;
• high price tag;
• rigid corrugated hose.

The last two disadvantages are offset by the characteristics of the device - the rigidity of the hose design protects the accessory from damage when the vacuum cleaner is operating at maximum power.

And the high price tag is fully justified by the excellent equipment and operating parameters of the equipment. It is rare that a model is initially equipped with strong and comfortable nozzles made of solid materials.

A detailed analysis of the features of this vacuum cleaner and its disadvantages was made by one of the owners in the following video:

Conclusions and the best offers on the market

Having considered the features of the Philips FC 9174 model and its characteristics, we can state that this vacuum cleaner is really worth the money. Despite the observed disadvantages, the advantages completely cover them.

Numerous owners love the incredible suction power and relatively quiet operation. Also respected are ease of maintenance, ease of regular cleaning, conscientious assembly, excellent filtration system.

Significant disadvantages lie in the high price tag and the large weight of the device - 6.3 kg is a bit much for beautiful ladies. If these criteria are not essential, then you will be satisfied with the purchase of Philips FC 9174.

Do you want to talk about your own experience in choosing and operating the model we have described? Do you have information in your arsenal that will be useful to site visitors? Please write comments in the block below, post photos on the topic of the article, ask questions.