- 3 General Climate GC/GU-EAF09HRN1
- How often should the device be cleaned?
- Tips and tricks for choosing
- 9 Haier
- The principle of operation and features of split systems
- How does air conditioning work?
- Features of inverter models
- A few tips for choosing
- The best wall-mounted split systems
- Electrolux EACS-07HG2/N3
- Toshiba RAS-09U2KHS-EE / RAS-09U2AHS-EE
- Ballu BSG-07HN1_17Y
- 1 Daikin
- Rating of cassette air conditioners
- Shivaki SCH-364BE/SUH-364BE
- Dantex RK-36UHM3N
3 General Climate GC/GU-EAF09HRN1
General Climate GC/GU-EAF09HRN1 is a wall-mounted split system with an inverter type of control. It differs from competitors mainly in high cooling (2600 W) and heating (3500 W) capacities. However, the maintenance efficiency of the area is not too high - only 22 square meters. Inside the air conditioning unit there is an anion generator that purifies the air from dust microparticles, and a special deodorizing filter that gives freshness to the air. The fan operates at four speeds, adjustable with the remote control, and also has an auto-on timer. The price of the model is also pleasantly surprising: it is an order of magnitude lower than that of competitors.
Advantages:
- the best price for an inverter split system;
- high heating power;
- installed anion generator;
- deodorizing filter.
Flaws:
small service area.
The popularization of inverter split systems gradually replaced the classic installations from everyday life, without any fundamentally good reasons for this. The change of generations happened so quickly and imperceptibly that consumers did not have time to really figure out what an inverter is and how it positively differs from the classical system. Indeed: does it make sense to buy modernized air conditioners, or is it nothing more than an idea imposed by world brands? Consider the main advantages and disadvantages in a detailed comparison table.
| Device type | pros | Minuses |
| Classical | + Low cost + Possibility of the system operation when the limits of operating temperatures in the street are exceeded (work with increased wear of sensitive sensors and the system as a whole) + Less susceptibility to failures at low mains voltage + Small dimensions of compressor and condenser units | – Low efficiency (10-15% lower than inverter models) – The presence of noise during operation – High power consumption (compared to inverter models) – Creating a constant load on the home electrical network – It takes longer to reach the set operating mode |
| inverter | + Faster reaching the set temperature + Low noise level due to operation at low compressor speeds + Significant energy savings (30-60% of the energy consumption of classic) + Low load on the home electrical network + The actual absence of the reactive component of the current, contributing to the heating of the wiring + High temperature accuracy (down to 0.5 °C) | – The actual presence of electrical losses (but less than in classic split systems) – Higher cost (approximately 1.5 – 2 times) – Large dimensions of the external (compressor) unit – Sensitive electronics. responding to the slightest voltage fluctuations in the mains – The inability to turn on the air conditioner when the maximum permissible operating temperatures in the street are exceeded |
How often should the device be cleaned?
Many air purification filters require regular maintenance. Therefore, it is best to make sure in advance that the design of the air conditioner provides easy and convenient access to all these elements of the filtration system.
Do not forget about the convenient location of the outdoor and indoor units of the air conditioner in the house. The indoor unit, for example, should not be covered by furniture or other objects, and the outdoor unit should not be placed in the sun. The outdoor unit may also need a system to drain the condensate that forms during the hot season.
In some models, there is also a self-cleaning evaporator function (located in the indoor unit).
Tips and tricks for choosing
Before buying climate equipment, it is important to determine what area the device will serve. If you take equipment designed for a footage smaller than a room, you will not be able to achieve comfortable conditions. A weak unit will not physically be able to create and maintain the required temperature level
It is better to purchase a module with some margin. Then all available modes will work without unnecessary loads and provide a pleasant atmosphere in living and working areas.
The body of the outdoor unit must be metal. The plastic block simply will not withstand weather changes and aggressive environmental influences.
Options must be chosen clearly for yourself, because each additional function always increases the cost of a split system. It is worth paying only for those features that are really needed and will be constantly used.
Among the most useful:
- the ability to switch from intensive mode to night mode - quieter and more economical;
- self-diagnosis that recognizes internal malfunctions and notifies the owner about them;
- ionization, which makes the air cleaner and fresher - the option is especially in demand if there are children, allergy sufferers or asthmatics in the house.
All other extensions are not so significant and are not always worth paying a solid amount of money for them.
The length of the communication highway is not the most important parameter, but it is still worth paying attention to. The higher this indicator, the wider the possibilities for placing a split system in the room.
9 Haier

The company with a long-term presence in the world market continues to surprise potential consumers with bold design of household appliances, new technologies, practicality and a philosophy aimed at creating maximum comfort for owners of air conditioning systems and other products. And they are in more than 100 countries.
Among the running models, Russian consumers distinguish Haier HSU-09HNF203/R2 and the new Elegant HSU-12HNE03/R2. They are able to create an excellent microclimate in a room up to 35 square meters. m, save energy depending on the selected mode of operation, direct the air flow at different angles. In the reviews on the HSU-09HNF203 / R2, the owners, in addition to the pluses, include the function of a UV lamp, the possibility of processing air, not only inside the premises, but also outside.
The principle of operation and features of split systems
With the introduction of innovative technologies in air conditioners, silent and high-tech devices are gradually replacing bulky old-style models.
At the same time, new devices differ not only in performance and an extensive set of functions, but also in noiselessness, as well as ease of operation.
How does air conditioning work?
Acquaintance with climate technology should start with theory. The main task of the air conditioner is to absorb heat inside the building and bring it outside.
This is due to the properties of liquid substances. They absorb heat when they evaporate and release it as they pass from a gaseous state to a liquid state.

Split-systems of a modern sample are able not only to cool the air, but also to heat it. In this case, the device works exactly the opposite. The refrigerant absorbs heat from outside and transports it into the room
The task of this kind of equipment is not to create a pleasant coolness, but to absorb excess moisture. When buying, consider this fact and additionally order a humidifier. After all, low humidity can lead to various respiratory diseases.
Features of inverter models
The operation of inverter climate technology is controlled by a frequency-controlled motor. The motor converts the electric current to direct current, and then back to alternating current.
Thanks to this idea, you can control the speed of rotation of the compressor. Accordingly, the user gets the opportunity to reduce / increase power.
Until the required temperature has been reached, the inverter motor runs at maximum power. As a result, the room cools or heats up many times faster.
Inverter models of air conditioners work constantly, maintaining the optimum temperature and consuming 50% less electricity. They are able to create the most comfortable conditions for people and pets in a house or apartment.
The list of advantages of inverter air conditioners should be supplemented with their durability and reliability. This is explained by the fact that the compressor wears out the most when it is constantly turned on and off, as classic units do.
We recommend that you familiarize yourself with the top ten inverter split systems, based on popularity among buyers and positive feedback from the owners of these models.
A few tips for choosing
Many people mistakenly believe that by purchasing a cheap air conditioner, they save a significant amount of money. However, this is not the case, since cheap air conditioners consume huge amounts of electricity, which leads to even more expenses.
In addition, when choosing an air conditioner, special attention should be paid to its appearance, since this technique will become an integral part of the interior of the apartment. It is worth noting other points that should be considered when choosing such a technique:
First of all, you should pay attention to the country of origin.
As practice and research have shown, the most reliable manufacturers in this area are Thailand, Malaysia and Belgium.
In this case, Chinese technology is somewhat inferior in quality.
It is very important to choose air conditioners that produce very little or no noise. The same is true for vibration.
The presence of an increased level of noise and vibration may indicate a short life of the device. It will break down pretty quickly. In addition, the operation of the indoor unit will interfere with the sleep of the residents, while the external unit will not allow the neighbors to rest peacefully.
The best wall-mounted split systems
Most often, split systems are placed on the walls of the room. This is the best option for offices and apartments. On the floor, they get in the way and take up space. Under ceilings are expensive, and if necessary, they are not easy to get to. We need different models, buyers have their own tastes and preferences. But the wall option is a priority. The wall-mounted split system serves comfortably, is easy to install, and requires a minimum of consumables. We present the 3 most successful models of this series.
Electrolux EACS-07HG2/N3
The split system will create climatic comfort in rooms up to 22 square meters. Nice strict design will perfectly fit into the interior of an office or apartment. The technical characteristics of the device are thought out just for this format. 2200W for cooling and 2400W for heating. Does not take up much space on the wall and even decorate it.
The Electrolux EACS-07HG2/N3 has an original filtration system. These are essentially three filters: plasma, deodorizing and fine cleaning. In the room where the split system works, it is easy and safe to breathe. The direction and strength of the air flow can be adjusted using the remote control or set the comfort programming option.
Advantages
- High density prefilters;
- Cold plasma air ionization function;
- Fan speed control;
- Anti-ice system;
- Ingress protection class IPX0;
- Backlit digital display.
Flaws
No Wi-Fi control.
Like all quality systems, Electrolux EACS-07HG2/N3 has self-diagnosis, warm start and motion sensors.
The best mobile air conditioners
Toshiba RAS-09U2KHS-EE / RAS-09U2AHS-EE
The Japanese brand Toshiba serves as a reference for quality and durability. This applies to the split system RAS-09U2KHS-EE / RAS-09U2AHS-EE. Its technical capabilities are designed for 25 sq. meters. In this volume, it will create an ideal microclimate.
The model has its own highlights. Blinds of the original design direct the air flow not only up and down, like all air conditioners, but also to the right and left. The design of the air damper is unusual. It was designed specifically to make cleaning easier. Easily removed and put in place. It is also easy to wash the coarse filter. Its long service life will not change from this.
Advantages
- Cooling power 2600 W;
- Heating 2800 W;
- Cooling range up to +43° outside;
- High power mode Hi-power;
- Compact indoor unit;
- Easy installation.
Flaws
Not detected.
The materials and components of the split system do not contain any of the metals and substances prohibited by ecologists. This is recognized in the European Directive on human and environmental safety.
Ballu BSG-07HN1_17Y
Easy to operate, functional split system. You can say about it “turned on and forgot”. It is enough to set the program before this, the rest will be done by itself. If the electricity suddenly turns off, after it appears, the device will resume operation in the previous mode: it will increase or decrease the temperature, purify the air, and ionize it.
At night, it will automatically lower the room temperature to ensure sound sleep. With the help of a split system, you can lower the humidity, ventilate the room. In emergency cases, the “hot start” and “turbo” functions are connected.
Advantages
- Cold Plasma generator;
- Protective coating of the Golden Fin heat exchanger;
- Function of automatic defrosting of the external block Defrost;
- High Density air pre-filters;
- Additional noise isolation of the external block;
- High quality UV-resistant plastic;
- Drainage outlet on both sides.
Flaws
Short connection cord.
The owners of Ballu BSG-07HN1_17Y noted the ease of installation. As noted in one of the reviews: “It was more difficult to dismantle the old ones than to attach the blocks of the new split system.”
1 Daikin
The Japanese manufacturer of air conditioners Daikin needs neither advertising nor introduction. Only one number is worth mentioning. The average service life of split systems is 105120 hours of continuous operation, which is almost twice as much as that of competitors. The company's products are also leaders in terms of resistance to frost. Even at -50 ° C, air conditioners are able to work. It should be noted that the Japanese manufacturer cares about the state of the ozone layer. Daikin was one of the first firms to transfer its equipment to safe (for the atmosphere) freon R410. The company also became famous for moving the assembly of air conditioners from Asian countries to Europe, which had a positive effect on quality.
When experts are asked about the best air conditioner, most of them immediately mention Daikin. Users support the high praise of experts, noting efficiency, quiet operation and versatility.The only downside is the high price.
Attention! The above information is not a buying guide. For any advice, you should contact the experts!
Rating of cassette air conditioners
These are very reliable and high quality devices. They are almost inaudible, but they provide a comfortable air temperature. They also help cleanse it. These models are difficult to install in apartments, but in private houses they are not uncommon, so it is worth considering which air conditioner is better to buy for a home, the price and quality of which will be at its best. These devices have high performance. Therefore, installation is recommended only in large houses.
Shivaki SCH-364BE/SUH-364BE
Model with excellent performance. It allows you to connect several indoor units to an external unit, which is especially important for cottages and business centers. Enough power to work on 70 sq. meters. The device operates very quietly due to the characteristics of the fan blades.
Shivaki SCH-364BE/SUH-364BE
Characteristics:
- area 70 sq.m;
- cooling element R 410a;
- power 10 550 W;
- timer, night mode, auto-restart, self-diagnosis;
- energy efficiency a.
pros
- high efficiency;
- there are necessary useful functions;
- suitable for any interior;
- radiator self-cleaning;
- ease of operation.
Minuses
high price.
Shivaki SCH-364BE/SUH-364BE
Dantex RK-36UHM3N
This is an option for most private houses, since the usable area is 105 sq. meters. The cost of the device is high, but it has the necessary set of functions. It is able to make the air cleaner thanks to modern filters. There are no maintenance issues.
Dantex RK-36UHM3N
Characteristics:
- area 105 sq.m;
- cooling element R 410a;
- power 11 720 W;
- timer, night mode, auto-restart, self-diagnosis;
- energy efficiency a.
pros
- quiet operation and fast creation of the optimum temperature;
- the body is very durable;
- self-defrosting;
- there is a self-diagnosis;
- simple control.
Minuses
not identified.





























