Overview of heating radiators "Sira"

Global

The Global brand was founded in 1971 by the Fardelli brothers. At the beginning of its activity, the company produced only aluminum radiators. In 1994, the company successfully began to conquer the Russian market and then, they had to start producing bimetallic batteries as well. Equipment manufactured by Global meets Russian GOSTs.

Modern radiators manufactured by a company from Italy are made of high quality materials. Inside are steel vertical and horizontal tubes. The outer part of the radiator is aluminum, which indicates high strength.

Radiators Global

Bimetal radiators Global

Model	Peculiarities	Dimensions, mm	Heat transfer, W	Average price, rub.	Number of sections, pcs.
global style 500	Suitable for apartments with narrow windowsills. Can be combined with metal-plastic, polypropylene, polyethylene, copper pipes. Classic design.	575*80*80	168	700	1-20
Global style plus 500	Suitable only for window sills of standard width. They allow you to save heat due to the fact that they respond very quickly to commands from the shut-off and control equipment. To make it easier to maintain them, it is necessary to install two ball valves: on the supply pipe and the return pipe.	575*80*95	185	730	1-20
Global style extra 500	Suitable for autonomous and centralized heating systems. Covered with enamel. The upper sole is rounded.	566*80*80	192	450	2-20

Aluminum radiators Global

Model	Peculiarities	Dimensions, mm	Heat transfer, W	Average price price, rub.	Number of sections, pcs.
Global Iseo	Differ in the improved aerodynamic characteristics. Cast body.	432*80*80	134	390	1-20
Global Vox	Radiators can be installed under low window sills. Differ in the improved thermal convection. Not suitable for central heating system.	440*80*95	145	420	1-20

Ferroli

Of the Italian manufacturing companies, Ferroli, which is steadily developing, should also be mentioned.

Ferroli aluminum radiators

Ferroli POL aluminum radiators have a high thermal output.

Ferroli radiators are very convenient thanks to the following points:

1. Slow change in temperature gradient (slight temperature difference at different heights, which are between the ceiling and the floor).
2. Proper location of batteries in a horizontal version (installation under the window and along the walls facing the outside, in order to reduce the negative effect of the cold that comes from windows and external walls).
3. Attractive appearance and a large selection of models.
4. Durable and high quality.

You can also pay attention to the German heating radiators.

As you can see, Italian radiator manufacturers offer a wide range of radiators and are leaders in the production of aluminum and bimetallic batteries. Especially on the market there are products of a large number of manufacturers from Italy.

Sira is a model of efficiency and beauty

Features of Italian batteries

The Sira heating radiator, being one of the best representatives of bimetallic radiators, organically combines the advantages of a steel core and an aluminum heat exchanger.

Benefits of Sira batteries

Thanks to the use of two materials, Sira batteries are distinguished by the following features:

1. The presence of an all-metal frame completely eliminates the contact of the coolant with aluminum, so that the latter is protected from corrosion, which, as a rule, is caused by a bad coolant.
2. The use of high-quality materials and constant control of the production process significantly increase the life of the radiator compared to similar products from other manufacturers.
3. The special shape of the heat exchanger increases the power of the panel.One section of the radiator allows you to heat a large area of ​​​​the room, so you can use smaller radiators (or fewer sections).

But the main advantage of Sira radiators is their elegant and attractive appearance. Their characteristic curved body without sharp edges and protruding corners will not disappoint even the most demanding customer.

In addition, they can be installed in children's and other similar institutions where security issues are given increased attention.

Advantages of Italian heating panels:

• innovative design and smooth outer surface - batteries do not accumulate dust and are easy to clean with common household detergents;
• low inertia - after a minimum period of time after switching on, the air in the room will warm up to a comfortable temperature;
• strength - the radiator perfectly withstands high pressure inside the system (up to 170 atmospheres) and tolerates hydraulic and pneumatic shocks well;
• long period of operation - the absence of welds, which are often destroyed, allows the manufacturer to guarantee a 20-year period of operation of their products;
• the highest quality technology for assembling individual sections - unique patented O-Ring gaskets are used;
• noiselessness - during thermal expansion, the steel frame does not make noise and crackles.

The design of Sira radiators is beyond praise

Varieties

The widest range of Siri radiators allows you to choose a model that perfectly suits your needs. The distance between adjacent sections can be from 300 to 800 mm. The power also changes accordingly.Therefore, even in large areas, Italian bimetallic batteries will look organic.

The most common products are:

1. Sira Bimetal. Aluminum batteries with a steel core that do not have sharp corners and edges. Steel pipes with a diameter of 12 mm are used as a frame (wall thickness is 1.25 mm). Thanks to these design features, maximum heat transfer is achieved. A prominent representative of this type of batteries are bimetallic heating radiators Sira RS-500, RS-300 and RS-800.

In the photo - Sira RS-300, RS-500, RS-800

1. Sira Twin. These batteries can serve as part of a hydraulic heating system and work from the mains. A special heat-radiating heating element makes their use as economical and safe as possible. Such radiators will be an excellent choice for homes where there are problems with the supply of coolant.

Sira Twin can also be powered by electricity

TOP 4 aluminum heating radiators

Aluminum batteries have the highest thermal conductivity and rapid heating due to thin walls. They are recommended for heating a private house: they are simple, economical, there is no need to overpay (closed autonomous system). But aluminum is sensitive to water quality, subject to corrosion, therefore it is not used in systems where a long stay without water is provided (for example, draining the coolant for the summer in apartments of multi-storey buildings).

ROMMER Al Optima 500x12

All aluminum radiators provide lateral connection (1 inch). The center distance is standard - 500 mm. One section of the radiator weighs 0.81 kg and holds 0.28 liters of water.This type, unlike the others presented in the rating, will require a minimum of coolant in the system, so heating occurs much faster. Withstands temperatures up to 110 °C. The wall thickness of the vertical collector is 1.8 mm. Treated with anti-corrosion coating. The power of one section is 155 watts. Heat dissipation - 133.4 W at a temperature of 70 ° C. Designed for a pressure of 12 bar (maximum pressure testing - 24 bar).

Advantages:

1. It's easy to set.
2. Laconic design.
3. Lungs.
4. Reliable.
5. Inexpensive.

Flaw:

1. The material is fragile. During transportation, it can be crushed (there are isolated cases).

ROMMER Al Optima 500 for 3500 rubles for 12 sections is the most economical option, with a discreet design and a normal degree of reliability. Provides good heat dissipation, although less than Rifar Alum 500. 86% of users recommend these batteries for purchase.

Rifar Alum 500x10

It has a much larger weight - 1.45 kg. The volume in one section is almost the same - 0.27 liters. The upper part has rounded petals that enhance convection. Withstands much higher pressure - 20 bar (up to 30 when pressing). Designed for any temperature up to 135 °C. Heat dissipation is quite high - 183 watts. 10 sections are needed to heat an area of ​​​​about 18 square meters. m.

Advantages:

1. Nice view.
2. High heat dissipation.
3. Heat up the room quickly.
4. Convenient easy installation.
5. Reliable, high quality.

Flaw:

1. High price.

Rifar Alum 500 for 6 thousand rubles (10 sections) provides an optimal level of heat transfer. This type of radiators has excellent characteristics, but also a little overpriced. A model with a small number of reviews, but they are all positive.

Royal Thermo Revolution 500x10

Weigh less than Rifar Alum 500 - 1.2 kg. The ribs are also made somewhat "wavy", which improves the appearance. Differ in large volume. One section holds 0.37 liters. Withstands the same pressure in the system. The limit temperature is 110 °C. Heat dissipation is also high - 181 watts. The power of one section is 171 watts.

Advantages:

1. Design.
2. High heat dissipation.
3. Good paint quality (does not peel off like cheap models).
4. They warm up well.

Flaws:

1. There are isolated cases of a small marriage: the back wall is poorly painted, a drop of paint on the thread.
2. Expensive.

The price of Royal Thermo Revolution 500 is 6250 rubles for 10 sections. Despite the larger amount of coolant in the system, radiators provide fast heating. High heat dissipation. 92% of buyers are satisfied with the reliability, quality of materials and painting.

Global ISEO 500x10

Model in a laconic design with subtle petals. One section weighs a little more than the Rifar Alum at 1.31 kg. It is distinguished by the largest volume of coolant in one section - 0.44 l. Designed for a pressure of 16 bar (24 bar - crimping pressure). Maintains temperature of the heat carrier up to 110 °C. The heat output of one section is less - 115 watts. The power is higher - 181 watts.

Advantages:

1. Appearance.
2. Normal heat dissipation.
3. They heat great.
4. Good quality coverage.

Flaw:

High price.

The cost of Global ISEO 500 x10 is 6500 rubles. In terms of heat transfer, it loses to all aluminum radiators in the rating. It has a very large amount of coolant in the system for this segment. But 91% of buyers are satisfied with the purchase and recommend it for purchase.

Step-by-step instruction

• First of all, it is necessary to make markings for the subsequent installation of brackets.
• The brackets are then attached to the wall.
• Mayevsky cranes are installed on radiators.
• After that, heat supply regulators, plugs, valves and taps are mounted.
• The horizontal alignment of the heaters placed on the brackets is carried out.
• Radiators are connected to the piping system with the help of transition fittings.
• At the end, the heating system is pressure tested and the coolant is pre-launched.

In practice, the efficiency of even a high-quality heating system decreases over time. In this regard, the owner often faces the problem of replacing its individual components.

To change or install radiators, you do not need to have special skills, just follow the step-by-step instructions, have the appropriate tool and at least a little understanding of the specifics of this area.

Models of batteries for heating the bathroom

The Termoarredo group is represented by stainless steel heated towel rails. Devices serve simultaneously for heating and for household purposes. Moisture-resistant material allows coils to be placed in bathrooms, saunas and similar areas. Sira heated towel rails are made in a sophisticated style and can decorate any interior.

Characteristics:

• 3 versions: straight, curved, chrome-plated;
• height: 0.8–1.2 m;
• width: 0.5 m;
• heat dissipation: 340-865 watts;
• warranty: 2 years;
• working pressure: no more than 6 bar.

The cost of Syrah heated towel rails is from 14,800 rubles.

Sira range of radiators

• Bimetal sectional radiators Sira (steel + aluminium)
  • RS Bimetal
  • Ali Metal
  • RS Twin
  • Concurrent
  • Gladiator
  • Alfa Bimetal
• Bimetallic panel "130" (copper + aluminum)
• Cast aluminum sections Sira
  • Ali Princess - the top is slightly rounded, which contributes to more active convection
  • Ali Queen - a special form of air ducts guarantee fast heating of the room;
  • Ali Roya - custom design, smooth curved lines;
  • Alfa - a thin heating device;
  • S2 - with a rounded top and increased safety - without sharp corners;
  • Diamante - with increased heat dissipation;
  • Zaffiro - with enhanced convection;
  • Quarzo - a special form of air ducts directs the air flow from the radiators to the center of the room.
• Extruded aluminum radiators - there are models with different depths - 80 mm and 100 mm;
  • Alux
  • Rovall has an unusual shape of air ducts - they seem to converge at the top due to which the flow of warm air rushes up;
  • Swing is a model with increased heat dissipation for this class of radiators.

Aluminum radiators Sira

Aluminum heaters are produced according to two technologies: casting and extrusion. Cast modifications are more massive and reliable: they do not have seams, but their price is higher - more metal is consumed, the technology and equipment itself are more expensive. Extrusion is made from several parts: the central part with ribs and air ducts is squeezed out, giving them a given shape. Then it is pressed, welded or glued to the collectors. This design is less reliable - there are seams, the collector walls are thinner. But less metal is consumed, and radiators cost less. Often recycled aluminum is also used in this technology, which also reduces the price.

What are the best aluminum radiators? Of course, cast. But with a very limited budget, extrusion can also be used. They will work well with a small stable pressure and good quality of the coolant, that is, in individual heating.

Cast aluminum radiators

Some models of die-cast aluminum radiators: Sira Ali Princess, Ali Queen, Ali Royal

The company provides a 15-year guarantee for all heating devices of this group. Outwardly, they are slightly different: there are a different number of air ducts, the shape changes. But in any case, there are no sharp corners. Sira cast radiators can be used in heating systems with high and low temperatures, from alternative energy and heat sources. They have a low inertia, because the heating of the room occurs in a matter of minutes after the system is turned on. A small amount of water in the radiators also makes it possible to maintain the required temperature level in the room with high accuracy (it is possible to install radiator regulators).

Technical characteristics of Sira aluminum radiators are summarized in the table. Collector diameter - one inch, working pressure - 16 atm

Please note that when installing, each radiator must have a manual or automatic air vent valve.

Technical characteristics of cast aluminum radiators "Sira" (click on the picture to enlarge it)

Extruded aluminum radiators

Some models of extruded aluminum radiators: Sira ALUX, Rovall, Swing

Despite the shortcomings of the technology itself, Sira gives this type of product the same great warranty: 15 years. For 50 years, considerable experience has been accumulated, technologies have been worked out. At the factory, all radiators undergo two-stage testing. Apparently, the technology used is advanced, since the working pressure of this group exceeds that of those made by casting: 25 atm, versus 16 atm.

Specifications of Sira extruded aluminum radiators (click on the picture to enlarge it)

Innovation and Design

Onice's design and technology are the result of years of research and innovation, seeking new solutions for living spaces. The appearance of the Onice is a benchmark for the entire industry, representing one of the most modern examples of Italian style in industrial design. Its exclusive lines, fluid and dynamic, make it suitable for any space, making it the perfect piece of furniture for the most modern and prestigious environments.

The electronic display of a new ergonomic concept has been designed to provide the best possible intuitive use, together with comprehensive temperature management and usage schedule. Its locking system provides additional security for the elderly and children, who are thus insured against the possible consequences of incorrectly set parameters.

Connecting the Sira battery

The Italian company produces not only heating devices, but also components that are necessary for installation. Sections of the radiators are connected at the factory, so the device is provided with high-quality tightness. If there is a leak, you will have to buy a repair kit.

For the correct installation of heating radiators, it is necessary to take into account some recommendations:

1. In order to remove the radiator during repairs without turning off all the heating system, it is necessary to install shut-off valves for each device.
2. The hanging bracket can only be installed in a horizontal plane. The deviation can only be allowed by 0.1 degrees. If there are large discrepancies, then the heat transfer of the device will decrease. It is impossible to fix the radiator close to the wall.The distance between the appliance and the wall must be at least 3 to 10 cm for air movement.
3. The thermostat must be installed separately for each device. The control valve must be installed on the heat carrier supply pipe. You can fix it on the radiator using a special adapter.
4. In the RS series, the lower connection is made using a special connection block. In addition, a duct extension is installed at the same time. Sufficient circulation of the heat carrier and uniform heating of all sections of the radiator is carried out thanks to the unit. If you install a radiator with more than 10 sections, then you need to lengthen the duct.
5. After the radiator is connected to the heating system, it is necessary to screw the plugs onto the device. In the traditional model of the radiator in the case, you can see 4 holes for connection. After the battery is installed, 2 inlet channels remain. The most optimal solution would be to connect Mayevsky's automatic faucet to the upper hole of each radiator in order to remove excess air from the system.
6. Sections can only be connected in production. With self-connection, the radiator will fail in further operation. But employees of a company that has a manufacturer's license can perform a technical connection. If the work was carried out by a specialized company, then the guarantee for the radiator remains unchanged.

Radiators

It is difficult to imagine a modern house or apartment without heating radiators. They allow you to comfortably spend time in your home in the frosty season. At the same time, their appearance should match the style of the interior.This fact determines the popularity of acquiring bimetallic radiators.

Among the many variations, Sira bimetallic heating radiators are the most acceptable in terms of price-quality ratio. At the same time, many buyers note that the installation does not require the possession of special skills.

The Sira RS radiator is ideal for introducing metal radiators after the old cast iron ones. The installed elements will last a long time and, if properly installed, will not require replacement and technical repairs until the next overhaul.

The most common combination for a bimetallic radiator is steel and aluminum.

The ability to use the desired metal in “problem” places in a greater proportion increases the strength characteristics of the future room heater. Each millimeter of the battery is calculated and manufactured precisely and scrupulously, so there can be no doubt about the quality and durability.

Overview of the range of bimetallic radiators

Radiators of the Bimetal line have a two-layer structure. The basis is a steel core, which is a connection of collectors and channels through which the coolant moves. Welded joints are made according to the technologies used in the aviation and aerospace industries. The outer shell is aluminum alloy.

The layers are interconnected in a patented way. Models successfully combine the resistance of steel to corrosion and the high heat transfer of aluminum.

Hybrid radiators have a bimetallic composition. Their difference lies in the fact that they have 2 alternative connection options: from the mains or from the heating system.

Bimetal devices are assembled from separate parts - sections.The tightness of the joints is ensured by special gaskets.

RS Bimetal

A series of classic bimetallic radiators "Sira" is presented in five standard sizes. The body of the models is distinguished by a slight elegant curve and a discreet design. Batteries can have from 4 to 12 sections 8 cm wide each. The units are suitable for heating systems with pressure up to 40 bar.

The cost of RS Bimetal radiators: from 3,320 to 20,500 rubles.

Alice Bimetallico

Line with improved aerodynamic performance. High-quality heating is provided by 3 convective outlets that direct the heat flow into the depths of the room. Available in versions from 4 to 14 sections. The width of the module is 8 cm. The operating pressure must not exceed 35 bar.

Prices for radiators Sira Alice Bimetallico: 2 560–9100 rubles.

RS Twin

Series of hybrid radiators Sira. The devices are equipped with a dual power supply system: from the 220 V network and from the heating circuit. Convenient for heating a separate room, for example, a nursery, regardless of the season and the activity of the heating system.

The devices are available in 0.5 m wide models with three power options. They have a built-in electric heating element.

Concurrent

A range of compact heaters with increased heat dissipation. Hull depth is only 85 mm due to the reduced number of side ribs (5 pieces). The number of sections can be selected from 4 to 15. The maximum pressure is 35 bar.

The cost of Sira Concurrent devices: 2,780–10,300 rubles.

Gladiator

The series has an original design. Models have an attractive appearance, so Gladiator will decorate any apartment or office. The minimum cabinet width is only 20 cm, which allows you to place radiators under low window sills.The maximum center distance is 50 cm for the Gladiator 500 model.

Air guides provide fast heat supply to the center of the room. The special shape allows the device to have a high heat output at a shallow depth of 8 cm. The radiators withstand a standard pressure of 35 bar. The number of sections in the collection is from 4 to 15 pieces.

Alfa Bimetal

The series is distinguished by a rounded upper part without sharp corners. The battery has three directing channels for an exit of warm air. Available in 50 cm width with 4 to 15 modules. The working load is allowed within 35 bar.

The price of Alfa Bimetal Syrah products: from 740 rubles. per section.

130 Aluminum-copper

A series of bimetallic radiators with a copper core and an aluminum shell. They have a modular structure: they consist of 4–7 sections, each 13 cm wide. The body depth is only 6 cm. Due to the use of copper, which has a high thermal conductivity, the 130 series is characterized by efficient heat transfer.

Main lineup

Sira radiators on the official website of the manufacturer are represented by six main model ranges:

• Sira Competitive;
• Sira Gladiator;
• Sira RS Bimetal;
• Sira Alice;
• Sira Primavera;
• Sira Omega.

Let's take a look at these models in more detail.

Sira Competitive

Bimetal radiators Sira Compurent are distinguished by the absence of welded seams. This made it possible to increase the strength of the equipment and make it more resistant to ruptures - the test pressure is 52.5 atm, the working pressure is up to 35 atm, the burst pressure is 170 atm. The heat transfer of the model range is 149 W/section with a center distance of 350 mm and 187 W/section with a center distance of 500 mm.Today it is one of the most durable devices.

Sira Gladiator

Sira Gladiator radiators are distinguished by their affordability - this model range is characterized by a low price and excellent technical characteristics. The maximum capacity of one section is 0.2 liters of coolant, the working pressure is up to 35 atm. Consumers can choose from models with a center distance of 200 mm (heat output 92 W per section), 350 mm (heat output 148 W per section) and 500 mm (heat output 185 W per section). Batteries are guaranteed for 20 years, while the actual life span can be up to 50 years.

SR-Bimeta

The SR-Bimetal series is the most advanced. Radiators from this model range are distinguished by high heat dissipation, small capacity, pleasant appearance and unsurpassed build quality. If you want to buy really cool radiators, feel free to choose the Sira SR-Bimetal range. It includes:

• RS-300 - center distance 300 mm, volume - 165 ml, heat dissipation - 145 W;
• RS-500 - center distance 300 mm, volume - 199 ml, heat dissipation - 201 W;
• RS-600 - center distance 600 mm, volume - 216 ml, heat dissipation - 230 W;
• RS-700 - center distance 700 mm, volume - 233 ml, heat dissipation - 258 W;
• RS-800 - center distance 300 mm, volume - 250 ml, heat dissipation - 282 watts.

The maximum working pressure for Sira SR-Bimetal radiators is 40 atm.

Sira Alice

The Sira Alice series is divided into three intermediate ranges - Alice Bimetall, Alice Princess and Alice Queen.The first model range includes high-strength Sira bimetallic radiators, the cores of which are manufactured using space-welded technologies. As for the aluminum "shirt", it is made by injection molding. The sections in these radiators are welded together, which significantly increases their strength. There are models on the market with 350 mm center distance and 151 W heat dissipation, as well as models with 500 mm center distance and 190 W heat dissipation.

The Alice Princess range includes rounded aluminum radiators that are safe. The center distance varies from 350 to 800 mm, heat transfer - from 149 to 270 W, the volume of one section - from 0.26 to 0.47 liters. The maximum working pressure is 16 atm - this is quite enough to work in autonomous heating systems. As for the Alice Queen model range, it is characterized by increased heat dissipation - it is 191 W for models with a center distance of 500 mm and 220 W for models with a center distance of 600 mm.

Sira radiators from the Alice Princess and Alice Queen ranges are manufactured using high pressure casting.

Omega

The Omega range is represented by inexpensive aluminum radiators with low heat dissipation. It is 172 W for models with a depth of 96 mm and a center distance of 500 mm. The production of thin aluminum radiators with a depth of 80 and 75 mm with a center distance of 350 to 500 mm and a heat output of 132 to 164 W is also carried out.

An offshoot of this model range is the Omega Bimetall series - it includes Sira bimetallic radiators with a depth of 75 and 80 mm. Their heat output varies from 140 to 174 W, center distance - 350 or 500 mm.The maximum working pressure is 35 atm. The warranty for devices from this model range is 15 years.

Features of Sira radiators

Bimetal radiators Sira saw the light in 1961. The patented production technology gave impetus to the further development of the brand. A few years after entering the heating market, Sira becomes known in many other countries, delivering quality and durable radiators. Further improvement of assembly technologies has made it possible to achieve impressive results, thanks to which the products of this Italian brand are becoming known almost all over the world.

What are the main features of Sira bimetallic radiators?

• Resistance to high pressure - this gives them the ability to work in centralized heating systems.
• Adaptation to Russian working conditions - the manufacturer has done everything possible so that his products can work even in the most severe conditions.
• High quality workmanship - it was achieved through careful control over the technological processes of production.

Bimetal models are excellent Italian quality!

Sira devices are made from environmentally friendly components, which allows you to achieve high quality finished products. These Italian radiators are used to heat apartments, offices and workrooms, clinics and hospitals, kindergartens and schools, as well as industrial and industrial premises. They tolerate water hammer well, cope with increased pressure in heating systems, and resist the effects of aggressive coolant.

Bimetallic batteries can boast such an advantage as a high heating rate - in this parameter they easily bypass competitors. One of the factors affecting the speed is the small internal volume. It should also be noted that the Sira bimetallic heating radiators are resistant to leakage - high-strength gaskets located between the individual sections are responsible for this.

Radiators "Sira" are made of steel and aluminum - such a "sandwich" of two metals allows you to achieve resistance to negative influences. The production of aluminum "shirts" in some models is carried out using extrusion. Due to this, exact dimensional conformity and resistance to destruction are achieved. As a result, very durable and reliable bimetallic batteries of true Italian quality are born.

The main guarantee of the strength of Sira bimetallic batteries is the use of high-strength steel, from which the internal cores are made - they are responsible for resistance to pressure and corrosion.

Also on the market are aluminum Sira models - they will be useful for heating private houses as part of autonomous heating systems. The devices are distinguished by a long service life, good appearance and a large margin of safety.

Extrusion batteries brand "Sira"

The Aluminum line is manufactured by extrusion. With this method, the aluminum melt is squeezed out using a special machine (extruder) through the molding holes.

The group is represented by two models: Rubino and Alice+. Thanks to the extrusion technology, the heaters can be placed vertically and reach two meters in height.Batteries are inferior in strength to bimetal and aluminum casting.

Characteristics of radiators:

• operating pressure - up to 16 bar;
• manufacturer's warranty - 25 years;
• coolant temperature - 110 °C.

The Rubino model is made in a restrained style. It has a wide range of sizes: from 0.2 to 2 meters. The number of sections is offered to choose from - from 2 to 10. Cost - from 600 rubles per section.

Alice Plus has a more elegant appearance. The width varies from 0.9 to 2 m. The number of modules in the assembly: 2-6 pieces. The price of the module is from 1,900 rubles.