What to do if the toilet is leaking

The toilet is leaking from below: - do-it-yourself installation instructions, what to do if the pipe is flowing, photo and price

What to do if the toilet is leaking: simple solutions to a difficult problem

Have you noticed that moisture accumulates around the toilet, and do not know how to fix this problem with your own hands? We will give the answer to this and related questions in this article, because a modern comfortable house is unthinkable without functional and high-quality plumbing. And its good condition guarantees an optimal level of life comfort.

But, sooner or later, plumbing equipment loses its performance and requires refurbishment.Such devices, sooner or later, break down, and you will either have to call a professional plumber or fix the problem yourself. Given the price of plumbing services, it is preferable to do the work yourself.

Proper installation ensures no leaks later

Overflow

The most common reason for a toilet bowl to drip is overflowing. Excess liquid in this case is sent to the overflow hole.

The main causes of overflow are as follows:

1. Loss of rubber pad elasticity. As a result of long-term operation, there was a loose overlap of the water flow. As a result, the gasket deforms and begins to leak fluid.
2. Gasket is not tight enough and poorly covers the outlet, which is located near the drain valve and, as a result, a leak occurs. The rubber element retains its elasticity, while there are no signs of deformation. In this case, the connection of the toilet bowl with the tank flows as a result of a weak pressure of the gasket against the wall of the device.
3. Broken valve pindesigned to hold the float. This can happen as a result of prolonged use of the part and the appearance of traces of corrosion on it.
4. Crack in valve body. As a result, water seeps through it and the toilet bowl flows because of this.

If the toilet cistern is leaking, and water is constantly directed into the device, you need to find the real cause of this phenomenon. To this end, experts advise testing equipment. Sometimes it happens the other way around, water is not drawn into the toilet bowl. In this case, the flushing mechanism must also be checked.

To do this, remove the cover of the device and raise the float up by hand. If only a centimeter is enough to stop the leak, this means that the float arm is not bent properly, so it is simply not able to shut off the flow and water flows freely through the drain hole.

In order to eliminate the fact that the toilet cistern is leaking, you need to slightly bend the lever so that it can shut off the water when it reaches a certain mark.

If the leak problem persists, the valve should be inspected. A fixing pin must be present in a certain place. It shouldn't be damaged. This part, located inside the valve, should stop the float lever.

In addition, you need to check the condition of the hole with the pin in it. Perhaps it has deformed. An unusable stud can be exchanged for a large-section copper wire. If the hole is deformed, a new product should be installed.

Perhaps the reason why the drain tank is leaking is the gasket. If, after pressing it against the valve, the liquid does not flow out of the drain hole, then you need to adjust its pressure. If this is not possible, install a new gasket.

But, since more modern designs of tanks with other principles of operation are now appearing, it is advisable to study their device.

What to do if the pipe behind the toilet is leaking

The last reason why there are troubles with the toilet is related to the vent pipe. How to close up the drain pipe in the toilet if it is an old cast-iron outlet and ordinary corrugations do not fit it?

The sewer pipe in the toilet often leaks when the toilet is installed on the cement mortar.Especially often this installation method is found in old apartments without repair. The method is quite simple and reliable, but over time, the pipe in the toilet leaks. Gradually, the putty cracks and crumbles, resulting in leaks. The remains of the solution are washed off into the sewer, and the leak gradually increases.

If a sewer pipe flows in the toilet, how to cover it up and how to do it correctly in our instructions:

1. take a narrow chisel or flat screwdriver, as well as a small hammer;
2. break up the remaining putty;
3. do not hit hard so as not to split the toilet outlet;
4. clean dirt, dust, debris;
5. fill in the void.

To seal the toilet, you can use a solution of sand and cement 1 to 1, diluted with water, but this is not very convenient. It is better to use silicone sealant, which is sold in every hardware store.

What is the best sealant to use to seal the toilet, if the toilet is flowing downstairs, consultants in the store can tell you. Experienced plumbers recommend using a special sanitary sealant - it has good adhesion to sanitary ware.

If you have done everything, but it still flows under the toilet, we recommend that you turn to professionals. Masters of the San Remo company will quickly determine the cause of the problem and fix the problem. If the pipes and plumbing are too worn out, it may be wiser to replace them. Our masters will install a toilet bowl of any type, incl. and suspended, on different types of surfaces.

Why is snot liquid like water

Mucus in the nose is formed by water, salt, proteins and enzymes, it is necessary to protect the respiratory tract from the penetration of pathogenic microflora and moisten the nasal mucosa.A large amount of liquid mucus indicates that many viruses have accumulated in the nasal cavity and an infection develops, accompanied by swelling of the mucosa. The body reacts to the pathological process by the formation of mucus of a liquid consistency, with the help of which pathogens are brought out.

• weaknesses;
• feeling unwell;
• headaches;
• dizziness.

Given the cause of the development of pathology, the following forms of the disease are distinguished:

• infectious;
• non-infectious;
• allergic;
• non-allergic.

If the snot that flows like a stream in an adult is not treated in a timely manner, the acute form quickly transforms into a chronic stage, the danger of which lies in complications - sinusitis, sinusitis, respiratory pathologies and even meningitis.

Attention, the photo may be unpleasant to view.

Faults

Usually, all possible malfunctions with a toilet bowl have the following symptoms:

• water constantly flows into the bowl;
• liquid continuously flows from the plumbing system into the tank;
• the toilet itself is leaking;
• flush button broken
• repeated pressing of the button is required in order for the drain to occur or the liquid to stop flowing into the tank.

To eliminate the breakdown, it is very important to determine its cause.

First option

Overflowing the tank is the likely reason why water is constantly flowing. All "extra" water goes into the bowl through the overflow.

Let's highlight a few reasons for this problem:

• valve crack (found only in plastic products);
• problems with the pin holding the float lever;
• low gasket pressure;
• its wear.

Understanding the reasons, you can roughly figure out how to act.

How to solve:

• We remove the cover.
• Raise the float a little. The flow must end. If this happens, it will only be necessary to slightly bend the lever in order to ensure that the water supply is shut off.
• If it doesn't help, you will have to inspect the valve. Instead of a broken stud, you can use a piece of copper wire. If the hole in which it is attached has become large, the entire valve will need to be replaced. To do this, you should take a sample of the old one with you to the store in order to find exactly the same one.
• If the gasket is worn out, then the entire valve will still need to be replaced, since they are not sold separately.

Second option

Consider the option in which water flows, and its level in the tank is less than the overflow. A common cause is a broken bolt, tightening toilet bowl and shelf. A similar problem existed especially acutely in older models, where there was a pair of steel bolts. Naturally, under the influence of water, they quickly became unusable. In this case, they need to be replaced. Moreover, it is desirable to choose products from corrosion-resistant materials.

You can solve the problem by disassembling and assembling the tank:

• turn off the cold water supply;
• remove the tank cover;
• empty it;
• disconnect the flexible hose;
• we unscrew the bolts that fix the shelf on the toilet: if it doesn’t work, you can use a hacksaw;
• tilt the tank back to get the shelf out of the cuff;
• drain the remaining liquid, lay the tank on a flat surface.

Replacing the bolts with new ones, you should assemble everything

At the same time, it is important to replace the rubber elements so as not to return to repair in the near future.

When tightening the bolts, be careful not to over tighten.The toilet material breaks quite easily.

Third option

What to do if the bolts are intact, there is a lot of space before overflow, and the liquid flows. When there is water in the tank, it does not flow into the bowl as long as the rubber bulb holds it. By pressing the button, the pear rises, the liquid flows out. Over time, the material from which it is made loses its qualities, which means that there is every chance that the pear will begin to let water through.

It is necessary to change the pear. It is fixed on the stem with a thread. You can unscrew it by turning it counterclockwise. You need to go to the store with a sample of the old product in order to pick up an identical one.

A temporary solution could be some kind of weight hung on the stem to press down the rubber, preventing the liquid from constantly flowing out.

Main reasons

If the leak is not eliminated for a long time, a dark smudge will form at the junction

To quickly eliminate the leak, you should identify the real cause of its occurrence. There may be several of them:

The tightness of the joint where the toilet bowl is connected to the sewer pipe is broken - the putty in the cast-iron socket has exfoliated. Often this happens when plumbing is installed on cement mortar.
Worn cuff or corrugation. The tightness of the connection is ensured by rubber membrane gaskets. Rubber is a material that eventually loses its elasticity and shrinks. Therefore, gaps occur between the outlet of the toilet bowl and the sealing joint.
A crack formed in the toilet bowl.
Toilet base cracked

The cause of the crack is inadvertently poured hot water, faience does not withstand a sharp temperature difference, it can crack.
The anchors are loosely screwed to the floor.

Toilet cistern repair: causes of internal leaks and how to fix them

What is meant by the concept of internal leakage of the toilet bowl? This is when water does not flow out of it and does not fall on the floor, but flows into the toilet in a constant stream or stream. Such a malfunction does not threaten the flood, but it affects the water bills. A trickle of water, continuously draining into the toilet, for a month, as a rule, pours into cubic meters, which you will have to pay extra. How to deal with such leaks? How to eliminate them?

It's all about the faulty water supply valve - in the float, or rather in the blocking mechanism itself. It does not completely shut off the water - this happens in most cases, but sometimes the cause of this phenomenon may be an incorrectly adjusted overflow pipe of the toilet bowl. Also, this behavior of the shut-off valves of the drain tank can be caused by a malfunction of the drain mechanism itself. You need to start repairing and troubleshooting these problems with the simplest thing - by checking the correct adjustment of the overflow tube. Try to raise it a centimeter higher and observe the behavior of the valves - if the water rises again and overflows into the tube, then the point here is in the float valve.

What to do if the toilet cistern is leaking

You need to find a plastic nut, which is located at the base of the float attachment to the toilet bowl, and unscrew it - this is where the rubber band is located, which is responsible for blocking the water. Take it out and rinse it well under running water. We do the same with that part of the float where she stood - we remove all the garbage from there. After that, put the gum in place and twist everything, as it was.Should help - if not, you will have to purchase a new gum and install it in place of the old one.

Toilet cistern repair with photo button

And the third reason why the tank can constantly pass water into the toilet is the incontinence of the drain mechanism. Simply put, the drain valve does not completely close. The reason may be hidden both in the debris that has fallen under the valve, and in the valve itself, which over time, like all rubber, dries up and ceases to fit snugly against the drain hole. In the first case, the edges of the drain hole will have to be thoroughly cleaned, and in the second case, the valve rubber should be replaced.

In conclusion, I want to remind you that after repairing the shutoff valves of the toilet bowl, it will not be superfluous to perform a high-quality adjustment of the float and overflow - only by adjusting their coordinated work, you can sleep peacefully and no longer wonder why the toilet bowl is flowing?

Why does water flow from the tank to the toilet

It cannot be said that there is only one reason for leakage and the solution to the problem of leakage is this. The possible cause may be specific to each specific design. But nevertheless, the “classical” design has become widespread in our country, and the consideration of leakage problems, as well as their elimination, will be considered on it. I also suggest watching an informational video that will allow you to understand the design feature of the functioning of the toilet cistern in order to better understand the nature of the flow:

Why is the tank leaking #1

The most popular reason is very obvious - the toilet bowl simply overflows, and all excess water goes through the overflow. And this reason has several reasons that lead to it:

Deformation of the rubber gasket during operation, when the rubber loses its elasticity and, due to loose overlapping of water, begins to pass it.
Insufficient pressure level of the gasket to the outlet of the drain valve. It has not been deformed and has not lost its elasticity - the gasket is simply weakly pressed against the toilet part and because of this, water flows.
Rusted or frayed during operation, the pin holding the float in the valve body.
Hull crack drain valve inside the tank toilet that is leaking.

​Attention! If a brass valve is used in the tank, then point No. 4 should not be taken into account, since cracks are the lot of plastic parts, brass ones are too reliable. Brass valves look like

Brass valves look like in the photo:

Why the tank has a leak number 2

If the cistern does not overflow, but there is a leak - what is the reason for the toilet cistern to leak? The second popular cause of leakage is a problem with the bolt connecting the tank and the toilet itself. Steel bolts rust and leak, plastic ones burst and water starts to leak.

Why is the tank leaking #3

Another popular cause of leakage is a problem with a rubber bulb. The fact is that the pear, like any rubber part of the toilet bowl, loses its elasticity over time, becomes more rigid and no longer takes the necessary shape, as a result of which the water begins to flow. You can recognize it by looking at this photo:

Why the tank has a leak number 4

It may also be that the drain tank is malfunctioning due to a skew or displacement of the float lever.There are quite a few reasons for skew: there may be a hole in it, due to which water flows into the float, or it simply shifted during active operation. Or the purchase of plumbing parts, the quality and service life of which, as well as the possibility of a leak from the tank, is out of the question.

What if cast iron

Repair of the sewer riser in the apartment is possible if a small leak is detected, a slight fistula, a small crack, or a cast-iron style (coupling, adapter) has burst. Such not very dangerous damage will withstand temporary measures.

Quick Repair Methods:

Cement does not need to be diluted. Take a dry solution. From the fistula, water oozes. The cement will get wet slowly. They applied a layer - the solution got wet - again a layer. Slowly, the fistula will “tighten”. Cement adheres well to cast iron - it will hold.

2. A more serious leak cannot be hidden behind cement. A large hole must be closed with a clamp. Get a clamp for the diameter of the riser. Cut a piece of rubber under it. In width, one should be equal to the width of the clamp, it can be a couple of millimeters more. In length - the diameter of the riser.

We wrap the ribbon around the pipe to check if it fits. We open the collar. We hope to stand. We tighten a little. We put a rubber gasket under it. We're trying to get her to close the fistula. And tighten the clamp to the end.
Another repair option is cold welding. But the clamp is more reliable.

There can be trouble in the sewers. Especially if the network is already old and has been serving for more than a dozen years. The most common of them are leaks of varying intensity. They can occur at the joints, through defects. Sewer line needs urgent repairs. If the damage is serious, then a replacement.Let's talk about repairs.

Defects are different. Therefore, the repair activities are also different. Sometimes a simple putty will be enough, and sometimes you will have to "suture". In any case, the repair is a temporary measure. The pipe will need to be replaced soon.

How to fix a leak in a polypropylene pipe in the most effective way

1. Elimination of leaks in a polypropylene pipe using cold welding

With the help of cold welding, almost any material can be joined, from wood to marble and ceramics. But in this case, we are more interested in sealing pipes from a certain material. How to fix a leak in a polypropylene pipe using the cold welding method? Here is a step by step guide:

1. Prepare the repair site. To do this, remove all dirt from the surface of the pipe, degrease it and sand it with sandpaper.

2. Prepare a polypropylene patch, which you are going to impose on a crack in the pipe. The size of the patch should be larger than the hole, and it should be processed in the same way as the surface of the pipe.

3. Prepare a cold welding solution. To do everything right, carefully read the instructions on the package. After you knead the mixture (if necessary), it should warm up a little and acquire some plasticity. You can knead the composition only with rubber gloves.

4. Apply the finished mixture immediately to both surfaces, attach the patch to the pipe. If necessary, secure with a tourniquet or clamp.

5. Wait about an hour - this is how long it takes for the mixture to harden. After that, you can process it in the way you planned earlier: for example, paint it. But water cannot be allowed to flow through such a pipe yet.The fact is that the most durable mixture will become only a day after its application.

6. If after work there is a certain amount of the mixture, it is not necessary to get rid of it. Wrap in polyethylene and leave until better times.

   

   

   

   

   

   

   

   

   

   

2. Elimination of leaks in a polypropylene pipe using a sealant

Using sealant to fix a leak is not a complete pipe repair, but only a temporary solution to the problem that has arisen in front of you.

Once again, I need to remind you of an important point. Whatever way you are going to fix the leak in the polypropylene pipe, the pipe must first be prepared for repair without fail

Namely, it is necessary to degrease and clean all the necessary surfaces

Pay special attention to the joints of the polypropylene pipe and fitting.

Sealant to eliminate leaks can be of different types:

• Neutral. Suitable not only for polypropylene pipes. However, to apply it, you will need a mounting gun.

• Acid. If the pipes in the apartment are not durable, then it will be completely useless for repairs.

• Silicone. Just like a neutral sealant, silicone has universal properties. Its main "field of activity" is the socket joints of sewer pipes.

3. Seal the leaking section of the polypropylene pipe

Before gluing, as in all previous cases, the polypropylene pipe must be prepared for repair. After stripping the pipe, it would be nice to dry it, even with a simple hair dryer.

After that, we select the material from which we will make a bandage for the pipe.It can be plastic or fiberglass (the main thing is that the repair material can be glued to the polypropylene pipe using epoxy glue). If you intend to use fiberglass to eliminate leaks, then keep in mind: the pipe must be wrapped with it at least five turns.

There are also certain requirements for the width of such a patch: it must be at least one and a half diameters of a polypropylene pipe. Apply glue to the bandage material, wrap it around the pipe that has leaked, and then press it with pre-prepared clamps.

Before letting water through the pipe, you need to let the glue dry. The waiting time depends on the type of glue, but usually at room temperature it dries for at least a day. If the ambient temperature is about 15 degrees, then it will take two to three times more time.

Read related material:
Which polypropylene is better for heating: choose a company, color, material

How to fix a leak in a cast iron sewer pipe

When a sewer pipe flows in a toilet in an old house, you will have to face the fact that the sewer structures there are made of cast iron. Before covering the sewer pipe and preventing leakage, it is recommended to determine the nature of the leak, the condition of the joints or places where water flows from.

If the mortar that once sealed the joints is still holding tight, and the sewer is leaking through cracks, treating the cracks with silicone will help. And you can use any waterproof glue or epoxy.

Leakage in the fistulas of the cast-iron sewer system is stronger. It is advisable to warn the neighbors about the problem.Having determined the size of the damage and assessed the strength of the structure, various measures are taken to eliminate leakage. It is recommended to wrap the area with a defect with gauze in a large number of layers and pour epoxy resin on top.

The use of a rubberized bandage, followed by a wire constriction, will help. Suitable for both copper and aluminum. This method is not only good in the case when the pipes are made of cast iron, but also applicable to steel products.

This is a temporary remedy. A reliable way would be to install a metal clamp. Its application will solve the problem for a longer period.

When small chips or cracks are visible on cast-iron pipes along the structure, this may be the result of icing from the inside in severe frosts in winter. The reason is the expansion of water when it freezes. Its strength is such that it easily breaks not only cast-iron, but also steel pipes.

The absence of a sewer smell in the apartment indicates that the cracks did not open completely, but simply condensate formed. It creates the illusion of a leak. Covering such cracks with sealant will be enough. It is previously recommended to dry the resulting defects and thoroughly degrease them.

You need to take care of the thermal insulation of the exhaust pipe in the riser. This will stop condensation from forming.

Leak due to overflow - what to do

If the drain tank is leaking due to constant overflow, you need to carefully examine it and find the cause of the problem using the following technique:

• First you need to remove the tank cover;
• The float is slightly raised and held;
• If the tank does not flow when the float is raised, then the cause of the problem lies in the float lever - it simply does not block the water;
• To get rid of problems with the float mechanism, you need to bend the lever and fix it in a position that allows you to completely block the outlet;
• If the toilet continues to flow, you need to inspect the valve mechanism - its pin could be damaged, corroded or displaced;
• If problems are found with the valve stud, replace it with a large-section copper wire;
• Sometimes there are situations when the cause of the leak is damage to the valve outlet, and the solution to this problem is a complete replacement of the valve mechanism;
• If all the previous operations did not help, then you need to check the seal by pressing it against the valve mechanism;
• A leaking gasket must be adjusted or, if it cannot be adjusted in any way, replaced.