6 kettle decalcifiers that can be found in almost every kitchen

Causes of scale in the kettle

Water flows from water pipes in our apartments, as well as from wells in suburban areas, containing impurities dissolved in it. The more these impurities, the more sediment is formed when it is heated. The amount of scale formed, including in the kettle, is determined by the degree of hardness of the water, which is responsible for the calcium and magnesium compounds in the liquid.

Precipitating, calcium and magnesium salts fall into our cups with hot drinks.In such quantities, they can not greatly harm the body. Settling for a long time on the heating element of an electric kettle, scale gradually grows in thickness and becomes a serious threat both to the appliance and to tea and coffee lovers. The fact is that on the surface covered with a layer of scale, which consists of a large amount of magnesium and calcium, a favorable environment arises for the development of bacteria and other microorganisms. The precipitate itself has good heat-insulating properties, contributing to the failure of the electrical appliance.

The hardness of water is determined by a special pH scale. If the pH value of a liquid is 7, then it is neutral. If less than 7, then the environment in it is acidic, otherwise it is alkaline. Alkaline water is called hard water.

Calcium carbonate, one of the main "culprits" of hardness, is an element sparingly soluble in water. However, as the water temperature rises, it gradually crystallizes and precipitates. This process begins at a temperature of 40 C and accelerates with its further increase. So gradually, from heating to heating hard water, a precipitate forms in the kettle.

Cleaning with home remedies

In order to properly clean the enamel kettle from scale at home, you will have to exert considerable endurance and patience, supplementing them with knowledge about permissible and prohibited means. Patience will be required while waiting for the boiling and further exposure of the solutions to the scale. The further functioning of the kettle depends on the right tool - the main thing here is not to do more harm to the dishes than good. Choose the Right Ingredients for folk compositions when cleaning enameled teapots.And remember that you can’t use acids thoughtlessly, as they damage the surface.

Sodium bicarbonate is a safe and effective way to deal with scale

Ordinary baking soda has proven to be an effective cleaner that does an excellent job of removing old limescale deposits without harming either your health or your enameled kettle.

Ingredients:

• baking soda - 1 tbsp. l.;
• water - 2 glasses.

Instruction:

1. Pour water into the kettle and put baking soda inside. Stir.
2. Put on fire and wait until it boils.
3. Boil the solution over low heat for half an hour.
4. To clean the surfaces, wait for the liquid to cool to prevent cracking.
5. Use soft sponges for rinsing and removing.
6. When you have finished the cleaning procedure, rinse the kettle and dry it, both inside and out.

Cleaning from plaque and scale

An effective way to remove scale are solutions prepared on the basis of apple and potato peels. The method is effective and safe.

You will need:

• cleaning from two potatoes or apples;
• water;
• soft sponge.

Mode of application:

1. To wash the kettle with cleanings, you should use only fresh peels. They contain more elements responsible for cleansing. Be sure to thoroughly rinse potatoes or apples.
2. Send the cleanings to the kettle.
3. Pour in enough water to cover the entire area of ​​the scale.
4. Put the kettle on the fire and bring to a boil.
5. After boiling, turn off the heat, and leave the solution in the container for 2 hours.
6. It remains only to remove the scale using a soft sponge and dry the cleaned surface.

If vinegar, then only apple

Choosing from the entire list of acids available for purification, give preference to soft, natural ones. For example, when choosing between vinegar and citric acid, choose the latter, but not in a concentrated form. If citric acid is not available, use vinegar-based cleaners with a low acid percentage. Apple cider vinegar will help to safely remove scale in an enameled teapot. The advantage is its naturalness, which is responsible for the mild and gentle effect on the dissolved carbonates.

Mortar Ingredients:

• Apple vinegar;
• soda.

Application:

1. Pour the vinegar into a tall container - in the next step, a reaction will occur, as a result of which a large amount of oxygen will be released.
2. Add baking soda until you get a mushy paste. Remember that abrasives should be completely absent, so knead the mixture well.
3. Apply the solution to the places with scale, leave for 1-2 hours.
4. Rinse off using a soft sponge.

Carbonated drinks quick descaling

Remember that only uncolored drinks are suitable for getting rid of scale in enameled teapots. Any liquids with dyes can stain the coating.

Take:

• sprite;
• running water;
• soft fabric.

Instruction:

1. Pour enough soda into the kettle to bring it to the middle of the volume.
2. Place on stove to boil.
3. Boil 20 minutes.
4. Turn off and wait for the liquid to cool.
5. Drain the content.
6. Wipe dry using a soft cloth or sponge.

What to do to prevent scale

In order for scale and plaque to appear on your dishes and appliances as rarely as possible, you need to follow some recommendations for prevention:

Iron:

• pour filtered and distilled water;
• always leave the device in a vertical position;
• after use, the water from the iron must be drained.

Washing machine:

• use only high-quality powders when washing, marked automatic;
• try to wash at low temperatures (up to 500C). Pre-soak very dirty things;
• for prevention, it is not planned to carry out descaling once a year.

Coffee machine:

• use filtered water;
• cleaning every three months for prevention;
• do not mix special decalcification agents with folk remedies.

Cleaning the coffee machine from scale at home is easiest using special tools.
dishwasher:

• thoroughly clean the plates of food, scale settles on the residues in the drains;
• always use dishwasher salt, it changes the composition of the water and prevents scale and lime deposits.

Electric kettle:

• try to use filtered water;
• constantly pour out the remaining water from the kettle, do not leave a drop;
• fill the kettle with new water each time;
• do not wash surfaces with abrasive products, harm the kettle and yourself, because plaque forms faster on the surface with microcracks.

Features of special anti-scale products

A wide range of anti-scale chemicals provoked a logical question, which one to choose? All special products of this nature contain an acid, which, reacting with a solid lime sediment, dissolves it. As an active ingredient, manufacturers of products most often use citric, raspberry, malic, lactic, sulfamic and other acids.

It is important to remember that acid in high concentration can damage the rubber and plastic parts of the devices. Therefore, it is important to follow the instructions for using the products on a particular water heater.

Often, manufacturers of household appliances produce related care products (typical for manufacturers of coffee machines). They use components that gently remove scale without harming the details of the devices. This is not to say that an all-purpose descaling agent will not cope with plaque, but it may be more aggressive to the materials from which the internal parts of the devices are made. At the same time, the exact dosage for a particular device is not always indicated on universal products.

Funds are most often produced in three forms: liquid, powder and tablets, but, as verified by experience, this does not affect their effectiveness in any way. If liquid and gel products are already ready for use, then powder and tablet products still need to be dissolved in water. Consider the best, according to users, anti-scale products in 2020.

Special descaling products

Now there are too many special tools for descaling. Some are too aggressive and can make things worse, some are too forgiving and a waste of money, some just don't fit the type of car. We bring to your attention a small list of recommended tools:

• "Magic Rauer" (Magic Power). German descaler for washing machines, which allows you to clean even the oldest plaque. Sold in volumes of 250 ml.
• "Topper 3004" (Topperr 3004). Also from Germany.Especially recommended for use in Miele and Bosch washing machines. Volume - 250 ml.
• "Luxus Professional" (Luxus Professional). Domestic product for cleaning washing machines from scale. Many people love it for the fact that after its use a pleasant citrus aroma remains. Volume - 500 ml.
• "Bork K8P" (Bork K8P). Korean product, which is available in powder form. Before use, the product is diluted in water, and then poured into the machine. The package is designed for four times.
• "Top House" (Top House). Budget German cleaner for washing machines and any other household appliances. Volume - 500 ml.
• Antiscale universal. Domestic product for cleaning household appliances and utensils. Produced in bags of 100 grams. It does not need to be diluted with water, it is used as a powder.

Consumers speak positively about domestic products, as well as the Korean "Bork" and the German "Top House".

So, people who used domestic Antinakipin and Luxus note:

• They do the job well and are inexpensive.
• It is enough to use them once a year for the machine to work without failures.
• These products are multifunctional and applicable for cleaning not only the washing machine, but also other appliances, and even dishes. At the same time, expensive products are single-functional.

Staged cleaning

Like any other household appliance, the washing machine will appreciate the care of the owners, having served longer than the service life promised by the manufacturer. But for this it is necessary to clean every detail of the “mechanical laundress”.

How clean washing machineWhat parts can be put in order by yourself?

"Facade".

Outside, the housewives, of course, wipe the “washer” when they do the cleaning in the apartment.It is enough to wipe the sides, the “roof” and the door with a damp cloth to make the appliances shine like new. Light dirt can be easily removed with any detergent composition.

dispenser.

It would seem, why wash this part at all, if it is already in constant contact with the powder and anti-scale preparations that are added with each wash? However, the remaining moisture in the powder receptacle will lead to the appearance of mold, and this trouble is not so easy to get rid of.

Rubber compressor.

Liquid accumulates under the cuff, dirt particles, which, overheating, give rise to mold, which literally grows into rubber. And where there is dirt, there are bacteria. The seal must be cleaned after every wash. Otherwise, if the machine is “resting” with the door closed, the cuff will “suffocate”, which will cause mold to form under it. In case of severe contamination, a cleaning agent will help.

Drum.

It needs to be cleaned quarterly. Due to contact with dirty linen and powder, an unpleasant coating forms on the walls, and the wet film is not destroyed, even if it is ventilated around the clock, which is very problematic.

Drain filter.

It’s even scary to imagine how much dirt accumulates in it. This detail is one of the most important, if the filter is clogged, the mechanism will refuse to work. If you still manage to turn on the washer, a flood is inevitable.

General cleaning begins with filter cleaning. To do this, you need to pull out the drain plug, after placing a basin or a deep bowl under it - so that water did not flow on the floor. Clean the hole, removing debris, wipe thoroughly. Without a cork, the filter should stay for a while, so ventilation will occur. This procedure should take place at least once every two weeks.

Heating element.

To clean it, you will need to “drive” the washing machine without laying laundry at a temperature of no more than 60 degrees, adding a cleaner. The next step is to run the machine in an idle wash without detergent. Maintenance cleaning of the heater is required every three months.

General prophylaxis should be carried out once a quarter. But if pets live at home, then it is necessary to arrange cleaning more often, because no matter how clean the pet is, microscopic hairs accumulate on the clothes of the owners, which fall into the drain, settle in hard-to-reach places.

Thus, a brief step-by-step instruction for cleaning a home assistant looks like this:

1. free the drain filter from dirt;
2. turn on the machine by adding a cleaning agent to it;
3. "scroll" again with clean water;
4. wash the dispenser;
5. wipe the door seal;
6. dry "walk" with a rag on the drum;
7. wipe outside.
8. leave the machine with the door open and the powder receptacle for ventilation.

Dedicated washing machine cleaners

Prices for popular washing machines

In order for the equipment to serve for a long time, it is not recommended to make “daring experiments” on it, trying to save on cleaning products, since such “savings” may well lead to more serious expenses.

The table below shows several special compositions for the care of washing machines. Perhaps this information will help the reader to choose the best remedy in all respects.

Illustration	Brief description and approximate price level
	Cleaner for washing machines "Dr.Beckmann, which contains activated carbon, is manufactured by a German company. This tool is designed to clean the device from scale and dirt, as well as from any deposits located even in hard-to-reach places. In addition, this product contains special additives that protect metal and rubber parts from premature wear. With constant use With this tool, machine parts such as a rubber cuff and hoses, a heating element and a drum will always be in a clean condition. Thanks to this, electricity will be significantly saved, and the trouble-free life of the device will increase. The approximate cost of the cleaner is 275 rubles.
	Magic Power was developed by a German company that manufactures washing machines. The composition has earned good reviews from users who regularly use it. The basis of this cleaner is acid, so it is recommended to use it only when white scale deposits appear on metal parts. This tool is recommended to be used twice a year to remove difficult build-ups of scale. When using, strictly follow the instructions provided. The average cost of the descaling cleaner shown in the illustration is 110 rubles.
	"Topperr" - this tool was developed by the well-known German company "Bosch" in Russia, which produces household appliances. The composition is suitable for dealing with scale in all models of washing machines. "Topperr" is a complex tool that removes not only scale from the parts of the device, but also dirt, as well as salt deposits that collect on the heating element. The average cost of a package of such a composition is 300 rubles.
	"Kristall-fix" is a biological scale remover from a Russian manufacturer, developed on the basis of plant components. The product is suitable for all types and models of washing machines and dishwashers. It effectively and quickly acts on lime deposits, softening and separating them from machine parts. The advantage of this tool is that its effect on pollution occurs at a temperature of 60 degrees. The composition includes citric acid and a water-soluble polymer. The average cost of packaging such a tool is 140 rubles.
	Antinakipin is produced by various companies, but all formulations of this type are affordable budget funds. Users who regularly use Antinakipin leave positive feedback on its cleansing action. This composition is produced in different versions, which are intended for cleaning various household appliances. However, many housewives claim that they are all suitable for cleaning washing machines. The cost of this tool varies in a very wide range, starting even from 10 rubles per 100 grams.
	"Sandokkaebi" is a Korean-made product that is intended not only for cleaning the drum of a typewriter from scale pollutionbut also for its disinfection. The composition is effective for removing plaque that has arisen on parts technique when using hard water. Thanks to its formula, "Sandokkaebi" will help to keep the washing machine in working condition for a long time. The average cost of packaging this product is 145 rubles.

It should be noted that improper use of special tools can also lead to increased wear of the washing machine.

Therefore, it is very important to carefully study the instructions provided by the manufacturer before using a cleansing powder or gel, and not to exercise unnecessary "amateur"

The best descaling products for coffee machines and kettles

HG for coffee machines

Rating: 4.9

Safe for the human body, a highly concentrated liquid agent perfectly copes with scale in all types of coffee machines. It is thanks to the combination of safety and efficiency that "HG" got into our rating. Easy to use, with regular use, "HG" guarantees high-quality preparation of delicious coffee and saves time on cleaning the coffee machine. The volume is enough for 6-7 applications. The average price is 300 rubles.

• natural composition;
• high cleaning efficiency;
• no specific odor after application;
• biological safety.

• does not protect against corrosion;
• the range of application is limited due to the danger of the composition for surfaces that are unstable to the action of acid (enamel, zinc, aluminum).

Filtero coffee machine cleaning tablets, 4 pcs.

Rating: 4.8

The product takes a worthy place in our rating due to reasonable quality for reasonable money. The product is suitable for descaling automatic coffee machines and coffee makers of absolutely any type. One tablet is enough not only to clean the coffee machine: consumers advise a life hack - the composition remaining after cleaning the device can be used to clean the kettle. Consumption - 1 tablet for 1 application. Average price per package (4 tablets) - 300 rubles.

• high efficiency - quickly removes scale even in hard-to-reach places;
• versatility - suitable for all automatic coffee machines;
• affordable price.

not detected.

Top House for tea and coffee makers, 500 ml

Rating: 4.7

The completely natural composition provides the “Top House” decalcifier with a place in our rating. Made on the basis of citric acid with the addition of sodium salts, the cleaner will not only perfectly cope with potassium deposits on the walls of household appliances, but will also help extend the life of products by gently acting on their internal parts. A 250 ml bottle is enough for 2 applications. The average price is 320 rubles.

• does not leave an unpleasant odor after cleaning equipment;
• safe for the human body;
• economical;
• There is a child safety lock on the bottle cap.

not detected.

Topperr for coffee machines, 250 ml

Rating: 4.6

Another German-made cleanser. The most budgetary of all presented, nevertheless, it is equally effective for descaling coffee machines, for which it falls into our rating of the best. The volume is enough for 2-3 applications. The average price is 200 rubles.

Pan Cleaning Methods

How to clean an old frying pan? This question has been bugging me for quite some time now. It’s a pity to throw it away, but I don’t want to spend money on detergents, the price of which is very high.

You can save any kitchen utensils, the main thing is to choose the right cleaning methods.

7 ways for cast iron

At first glance, cleaning cast iron frying pans may seem like a very complicated and time-consuming process. But, knowing some tricks, you can easily cope with this problem.

How to clean the cauldron from soot and clean other cast-iron utensils:

Image Instructions Method 1. Soda + citric acid

• Wet a cast iron skillet with warm water.
• Prepare a dry mixture of citric acid and soda (1 to 1).
• Cover the entire surface with the mixture and leave for 10 minutes.
• Use a damp foam sponge to remove grease and wash the dishes in the usual way.

Method 2. Mustard Powder

• Heat the utensils on the stove.
• Drain off melted fat.
• Sprinkle the entire surface with a thin layer of mustard powder and leave for 20 minutes.
• After a while, rub the bottom and walls of the dish with a sponge without strong pressure.
• Finally, rinse it with plenty of water.

Method 3: Salt + Vinegar

• Spread a few tablespoons of salt in an even layer across the bottom of the cauldron.
• Top with the same number of tablespoons of 9% vinegar.
• Put the structure on the stove and wait until the components evaporate.
• Wash the cauldron as usual.

Method 4. Soda + Vinegar

• Mix one part 9% vinegar with one part baking soda.
• Rub the mixture on all sides of the pan and leave for 30 minutes.
• After half an hour, remove the remnants of soot with a sponge.

Method 5. PVA glue + soap

This is the most effective way to clean an old cast iron skillet. Algorithm:

• Grate 50 gr. laundry soap.
• Take a heat-resistant container that can easily fit the object to be cleaned, and pour half the water inside.
• Boil water, add soap shavings to it and add a small jar of stationery glue.
• Dip the cast iron product in this solution and boil for 3 hours.
• Finally, be sure to rinse the pan with detergent.

Method 6. Activated charcoal

• Wet a bowl with warm water.
• Grind 10 tablets of activated charcoal and sprinkle it on the desired surface.
• Leave for 60 minutes, and after a while, rinse the container thoroughly under running water.

Method 7. Glue + soap + soda ash

• Fill a container that will fit the resuscitation vessel with water and boil it.
• In boiling water you need to add: 50 gr. grated laundry soap, 100 ml PVA glue and 100 gr. soda ash.
• Boil the cauldron in liquid for 5-6 hours.
• After a while, let the pan cool and clean it with a hard sponge.

3 ways for aluminum

We figured out how to clean a cast iron skillet at home. Now let's deal with aluminum utensils. Details are shown in the table:

Image Description Method 1. Digestion.

The procedure is completely the same as the 7th method of cleaning cast iron. The only difference is that it takes 2-3 hours to boil.

The result of digestion can be seen in the photo.

Method 2. Boiling

• Pour 5 liters of water into a large container.
• Boil water and pour in 150 gr. salt.
• Dip dirty utensils in boiling water and boil for 1.5 hours.
• At the end, wash with the addition of detergent.

Method 3. Incandescence

• Fill the entire container with sand.
• Heat the structure on fire and leave to cool completely.
• Finally, rinse thoroughly under running water.

2 ways for ceramic and teflon coated cookware

Finally, we will find out how to remove carbon deposits and fat from pans with Teflon and ceramic coatings:

Image Description Option 1: Ignition

• Fill the bottom of the container with water and put on a slow fire.
• Boil water for 15 minutes.
• When the bowl has cooled, you can remove the carbon deposits with a soft brush.

Option 2. Alcohol.

The best product for cleaning carbon deposits from delicate coatings:

How to clean the kettle from scale in folk ways

The appearance of plaque occurs due to the presence of salts and impurities in the water. They settle on the walls of heating devices, which contributes to their premature wear.

The rate of formation of solid deposits depends on the quality of the product, the frequency of heating and the concentration of chemical impurities in the water. The accumulation of scale is also facilitated by improper processing of kitchen utensils. The use of aggressive cleaning compounds or mechanical action with metal sponges leads to the formation of defects, the cracks of which are gradually filled with limescale.

To avoid such consequences, you should ensure careful care of the dishes and adopt folk remedies for descaling the kettle. Their advantage is the undoubted cheapness, the disadvantage is the risk of spoiling certain surfaces.

1. Vinegar essence. 2/3 of the teapot should be filled with water and 1/3 of the vinegar. After boiling, the device is removed from the fire or turned off. After two hours, the contents are drained, and the walls are washed with water.
2. Soda. Take a tablespoon of soda per liter of water, bring everything to a boil and leave on fire for another 30 minutes. Then the solution is poured out and the walls of the dishes are thoroughly washed. True, to remove all contamination, you will have to make a lot of effort. At the same time, it will still not work to dissolve a dense coating of deposits.
3. Lemon acid. For 500 ml of water you need 1-2 tbsp. spoons of powder. Fill the kettle with water, dilute the mentioned descaling agent and bring the contents to a boil. After that, it remains to wait 30 minutes, pour out the liquid, and remove the remaining plaque with a sponge.
4. Brine. Cucumber is considered the most effective. It is poured into a kettle, boiled, cooled and the plaque is carefully removed.
5. Apple stonecrops.The peel of the fruit is placed in a bowl, filled with water, put on the stove. As soon as the contents boil, the container is removed from the heat for 2 hours, after which the solution is drained and washed.
6. Soda. The Sprite drink is ideal for the procedure. They fill the kettle halfway and wait for it to boil. Before you get rid of scale, it is desirable to free the water from the gas.
7. Lemon. The fruit is cut in half and placed on the bottom of the kettle, poured with water. After boiling, 10 minutes should pass. If necessary, the procedure can be repeated.

The listed means cannot be called universal. Some of them cannot be used for stainless steel cookware or water heaters. Prolonged exposure to aggressive substances can damage the material or individual elements. For example, citric acid can corrode coffee machine components or lead to corrosion.