Cleaning sewer pipes: an analysis of the best ways to clean pipes from blockages

"Tiret Professional"

Tiret is a fairly well-known, thanks to TV advertising, sewer pipe cleaner. However, this is exactly what you should not buy. It cleans very badly.To clean the most banal simple blockage in the kitchen, I had to pour out the whole bottle and wait about 2 hours, despite the fact that the smell throughout the apartment was incredibly smelly. Tiret smells terrible.

First, I poured the amount of gel indicated in the instructions and waited 15 minutes, there was no effect. Then she poured it in and waited again, again 0. As a result, she poured out the whole bottle and spent 2 hours on it, then the blockage resolved. It costs 300 rubles for a 0.5 liter bottle and I think it's quite expensive for one use. So I definitely don't recommend it.

Methods for cleaning sewer pipes

To decide how to eliminate blockages in sewer pipes, you must first find out exactly where the stagnation occurs and for what reason.

In cases where there is only a slight deterioration in the throughput of pipes, you can solve the problem yourself. But in very difficult cases, it is advisable to call the master.

We can name the following main methods of cleaning pipes:

• mechanical;
• chemical;
• hydrodynamic;
• folk ways - soda and vinegar; soda, salt and boiling water.

It is worth noting that with the help of folk tricks at home, everyone is quite capable of getting rid of blockages and smells from pipes.

If you decide to eliminate blockages in the pipes with folk remedies, then you can do this in one of the following ways:

Soda and boiling water. To do this, you need to dissolve a glass of soda in three glasses of boiling water and pour the pipe with this solution.
Soda and salt. For cleaning, you need half a cup of soda dissolved in water and the same amount of salt. The entire composition must be left in the pipe for 10 hours to interact with the blockage.
Soda and vinegar. Half a cup of soda and vinegar should be poured into the drain hole and, covering it with a cork, wait 2 hours

In this case, be careful, because mixing the ingredients leads to a violent reaction.

Blockage prevention

The most common cause of clogged drains is grease. It gradually accumulates on the walls of pipes after washing dishes, especially if you wash them in cold water or use a poor quality detergent.

The best prevention is to install a grease trap. It is a small structure with two sections, which is attached to the sink. The principle of its operation is that at first water with particles of dirt and fat enters the first section of the device, where the liquid is cleaned of debris.

In the second section of the structure, water is cleaned of fat and only after that it enters the sewer pipes, which ensures trouble-free operation of the water supply system.

Once a week, use a solution of vinegar and soda as a preventive measure. This simple method will not only save your pipes from blockages, but also prevent unpleasant odors.

Prevention of blockages also involves a number of other measures. Remove food particles from dishes before washing.

It is important to avoid getting leftover food down the drain. Sticking to the pipes, they later become the cause of all sewage problems.

Also, do not pour the fat remaining after cooking into the sewer - it must be disposed of separately, otherwise problems with blockages cannot be avoided.

Make it a rule not to throw hair from combs, paper, various objects into the toilet. Additionally, install a special protective mesh on the drain.

Once every 2 weeks, turn on hot water at full pressure for 1-2 hours. Also, use a plunger regularly.

At least once a month, use one of the specialized products that are sold in the departments of household chemicals. This simple prevention will help to forget about traffic jams in the pipes.

Cleaning the drain with folk methods

Boiling water can be used to eliminate small pipe contaminants, such as soap or grease deposits. At the same time, you qualitatively eliminate unwanted precipitation on the first 2-3 meters of pipes. Further, the water cools and ceases to dissolve the fat.

To remove a small amount of hard water, use baking soda. She falls asleep directly into the pipe. Following it, vinegar (9%) is poured along the walls. The ratio is 1:1 (half a glass). Due to the neutralization reaction, the structure of the scale (plaque) is destroyed.

Since vinegar and soda react quite strongly, the drain must be closed with a cork. In this form, the pipeline is left for a while (the duration of such cleaning depends on the degree of contamination of the pipes), and then washed with boiling water.

You can use a mixture of salt and soda, but it will act more slowly. It is also washed off with boiling water. You can also combine different means.

With small blockages, a plunger will help

The use of chemicals contributes to the elimination of bacteria and the smell of decomposition. So you clean and disinfect the pipeline at the same time. At the same time, funds from “chemistry” are undesirable while cleaning the blockage in the bath. On its surface, particles of detergent can remain, which will damage your skin during bathing.

Physical methods for cleaning pipes from blockage

If the sewer is clogged thoroughly (water is standing or leaving very slowly in the sink, toilet bowl), an iron cable or a plunger is used to clean it. The cable directly breaks through the blockage.Since it is impossible to predict exactly where it was formed, the length of the cable must be at least 10m.

With the help of a vacuum, the plunger draws out a part of the lump of dirt (hair, food residue, etc.) from a narrow section of the pipe, loosens it, and then pushes it further along the pipeline with a pneumatic impact.

Cleaning pipes with water through a cone under high pressure

At the moment, in addition to traditional cone-shaped plungers, more effective syringe-like ones are produced, as well as specialized ones for cleaning toilet drains (they have a specific shape for ease of use).

Special chemicals for cleaning pipes

For high-quality cleaning of the pipeline from the inside, many products have been developed based on caustic soda, lime or strong mineral acids. The most popular and famous of them:

At the same time, when cleaning the pipeline with Potkhan and Flup, you must be extremely careful - be sure to use protective rubber gloves and, preferably, increase the ventilation of the room where the work is carried out (for example, open windows). "Potkhan" is produced in the form of a powder, "Floop" - in the form of granules. Both products, in addition to the effectiveness of cleaning surfaces, are also distinguished by a high price.

Rules for the Use of Drain Cleaning Chemicals

If you are going to clean the pipeline with one of the above products, carefully read the instructions for use

It is important not to overexpose the solution on the surface of the pipe, as the substance will begin to corrode the walls, cause rust, holes in the water supply and other unpleasant consequences. All these substances are washed off with plenty of warm or hot water.

If you use powdered substances, you should make sure that they act in the right place, and do not settle on the surface of the sink, toilet bowl, etc. and corrode it. To do this, remove all the water from above and below the blockage - it may be necessary to partially dismantle some sections of the pipeline (which is not necessary during gel cleaning).

Chemicals for removing blockages in sewer pipes

For each of the proposed chemicals, the volume recommended for high-quality cleaning is indicated. You can use more, but this is usually inappropriate and sometimes even harmful.

The unused substance will simply wash away further into the pipeline and settle on its walls. If it is not washed off in a timely manner, it will continue to react as intended.

Any of these tools should be used once every six months to prevent the occurrence of sewer blockages, as well as eliminate harmful bacteria and other organisms in the pipeline.

The volumes of active ingredients (as well as types of products) during emergency cleaning are larger than during planned ones, which also testifies in favor of regular preventive work.

Use of special tools

Minor blockages can be dealt with at home, but if the situation is more serious, it is better to purchase a special tool for cleaning pipes. Let's figure out what drugs exist and how to choose the best pipe cleaning products.

Funds classification

According to the form of release, two groups of funds can be distinguished:

• Bulk - granular or powdered.These products are usually packaged in foil bags, one bag is designed for one application.
• Liquid or gel. These funds are considered safer. They are better washed out, so the risk of adverse effects on the pipe is reduced.

Depending on the main active substance, two groups of drugs can be distinguished:

• Alkaline funds. Alkalis are great at dissolving grease, so these products are well suited for use in kitchens.
• Acid agents. Acids, on the other hand, perfectly remove soap deposits and dissolve hair, so such preparations are best used in bathrooms.

Overview of the most popular tools

Today, manufacturers offer a wide range of products for cleaning sewer pipes. Consider the most popular drugs:

• Mister Muscle. Under this brand, a whole line of effective pipe cleaning products is produced. This is a granular product, and gels, and foaming liquids. Among the products you can find preparations intended for preventive cleaning, as well as a more powerful anti-clogging agent, the use of which allows you to dissolve a dense plug of sediment in the pipe.
• Tiret. This effective cleanser is widely advertised, so many have heard of the drug. The series produces drugs for the prevention, elimination of small blockages and emergency assistance in emergency situations, when water does not go down the drain at all.

• Pothan. The tool is universal, it will clean the sewer pipes from grease, lime and collagen deposits. It must be remembered that Potkhan is a professional tool, it is highly concentrated, so when working with it, you need to be careful, hands should be protected with rubber gloves.
• Flup.This product is available in granules. The line contains two versions of the drug, the first is intended for pouring with hot water, when using the second, you can use cold water.
• Mole. This is the most famous sewer cleaner, it has been produced for over 50 years and has managed to gain a strong reputation among consumers. The tool is produced by several manufacturers, so it may vary slightly in composition and exposure time. Therefore, before use, you must carefully study the instructions.

Standard instructions for the use of special tools

When purchasing a special tool, you must carefully read the instructions in order to know exactly how the sewer is cleaned. You need to make sure that a preparation is selected that is suitable for use with the type of pipes that are installed in the apartment. The standard instructions for the use of drugs look like this:

• First of all, you should take care of security. It is necessary to improve ventilation (open a window or turn on an exhaust fan), put on rubber gloves on your hands, and protect your face with a medical mask.
• Now you need to decide on the dosage by measuring the right amount of the drug.

• If the selected drug is liquid or gel-like, then the measured dose of the drug is poured into the drain. In the event that the drug is dry, then it is carefully poured into the drain, after which 1-2 glasses of water are poured after it.
• Now you need to withstand a certain time (the exposure time is indicated on the package).

There are different ways to clean sewers. The choice of the most effective depends on what caused the blockage.Special chemicals are effective if the blockage is formed by accumulated sediment on the pipe walls.

Determination of the location of the blockage

Preventing a problem is always easier, and often cheaper, than fixing it, this is clear to many. And problems with sewerage in a private house are no exception. Prevention measures will minimize the likelihood of pipe clogging if they are carried out regularly and systematically.

A significant problem can often be created by the very search for the place where the trouble occurred. This can be a difficult task for a non-specialist.

Usually, pipes do not clog immediately, but debris accumulates gradually. It accumulates in the pipe, interfering with the free passage of water. Accordingly, the main sign of blockage formation is poor water flow.

If there is a water seal, an unpleasant smell from the pipes due to the dirt and solid inclusions collected inside can appear only in a very neglected case. Otherwise, the source is something other than a garbage plug.

A water seal or water seal protects against unpleasant odors from the sewer, but is itself one of the most vulnerable elements in the drainage system

With a dense blockage, the water, in the end, simply stops leaving and stands in the sink or toilet. Often this can happen due to the irresponsible flushing of small household waste, even plain paper. Before it gets worse, the problem needs to be fixed as quickly as possible.

The water seal is provided by:

1. On sinks, sinks, bath and shower trays - siphons.
2. In bathrooms, washing, laundry rooms, in garages - ladders are installed in the floor.
3. The toilets have a built-in elbow.
4. In dishwashers and washing machines, a water seal is organized by placing a drain hose with a lift, or using a special device.

Among other things, water seals are the most common place for debris plugs.

They are present in any sewerage system, with the exception of very primitive drainage systems, which are found in some dachas. It is also the simplest situation, which most often can be dealt with on its own.

If a garbage plug occurs, it must be eliminated before it has time to bring serious problems. The most harmless of which is the appearance of an unpleasant odor.

Chemical sewer cleaning

Remove organic blockages, you can not only mechanically, but also with the help of chemical compounds

At the same time, it is important to remove the water in front of the cork, a large concentration of the drug increases its effectiveness

A common tool for cleaning sewer pipes is the Mole composition. This is sodium hypochlorite dissolved in water. It is poured into a clogged pipe and kept for 4-8 hours, then the sewer is washed with water.

If there is no Mole, then you can remove the blockage with alkali or acid. In terms of chemical composition, Whiteness bleach is similar to the composition of the Mole. But you can use other substances:

• Electrolyte;
• Caustic soda;
• Vinegar;
• Lemon acid;
• Cleaning preparations (for example, Sillit or Dometos);
• Oxalic acid.

A sewer system clogged with a rag can be cleaned with a plumbing cable, but only indoors. If the bed or the main riser is clogged, where the cable will fold into loops, use a hard wire.

How to clean a blockage in the pipes in the bathroom at home

How to clean the blockage in the pipes in the bathroom at home with a plunger? The bathroom, unlike the sink, is equipped with a safety drain hole. It must be closed before cleaning. With the help of a plunger, a water hammer is formed, which shifts the accumulation of dirt down the pipe from the bottleneck of the drain, where blockages are most likely to form. First you need to draw water into the bath so that the cup of the plunger is covered. Install the plunger over the drain hole, press firmly against the hole and sharply press the handle 3-4 times and sharply remove the plunger from the water. Repeat if necessary until water flows freely.

You can clean the bathtub with a brush, for which it is introduced into the sewer hole and the resulting blockage is pierced with sharp movements. If necessary, you can attach a ruff to a flexible rod to lengthen the structure and get the blockage at great depths.

If a plumbing cable is used for cleaning, the siphon is turned out and the cable is inserted into the drain hole as deep as possible. At the same time, it rotates in both directions. Screwing into the pipe, the cable clears all blockages, debris moves along the drain and is washed out. At the end of cleaning, all elements of the drain channel are washed and the siphon is cleaned.

If you do not have wire or cable at hand, you can take an electric drill or a screwdriver, which will also effectively help to deal with blockages.

Now let's look at how to clean the blockage in the pipes at home safely and effectively using folk methods. Baking soda is great for this.This is the cheapest and easiest way that any housewife can use without waiting for the help of a plumber.

In equal proportions, you need to take soda and vinegar, for example, one glass each. Soda is poured into the drain hole and then vinegar is poured on top. The hole is closed with a cork and left in this state for 2-3 hours, after which the pipe is washed with hot water. This method of cleaning the blockage is completely safe for pipes. It can be used not only to eliminate the existing blockage, but also for prevention.

Consider a few more solutions made from soda that will help get rid of the blockage. To do this, take about 150 g of soda and ignite it in a cast iron pan for about 15 minutes. After it has completely cooled, dilute it with a glass of water and stir thoroughly. Such a composition can be compared in effectiveness with the well-known store-bought chemical agent "Mole".

Another safe way to clean the drain is with a regular lemon. To do this, take a few lemons and squeeze them right into the drain hole. Soak without opening the water for at least an hour. If lemons are not available, you can use half a cup of lemon juice concentrate. This method is also quite effective.

If a clog has formed in the sink from a fatty plug, you can prepare a strong salt solution. It is poured directly into the drain hole and they begin to clean the drain with a plunger. To ensure a better fit of the plunger, its edges can be smeared with an inexpensive cream.

A simple blockage in the sewer can be removed with a powerful vacuum cleaner using its blowing function.

Causes of clogged sewer pipes

Pipes can become clogged for a number of reasons:

• errors at the stage of laying the sewer system.If the slope of the pipe is insufficient, lumps of debris will form on an ongoing basis. In this case, the solution to the problem lies in the complete replacement of the sewer;
• long-term operation of pipes - even plumbing products made of high-quality materials begin to cope with their functions worse over time, the pipes loosen, and their inner surface is covered with various growths;
• primary choice of materials - for example, deposits will form faster on cast-iron pipes than on plastic counterparts;
• ingress of foreign objects through the drain;
• lack or insufficient care of home sewerage.

Hair is the main cause of clogged pipes

What causes blockage in pipes

A clogged bathtub can be caused by a variety of reasons. The main ones are:

• Settling of debris, spools in the siphon and on the walls of the sewer pipes after draining the water from the washing machine, clinging a large amount of hair to the drain grate, clogging the through hole.
• Draining into the bath of liquid food waste, dirty water after cleaning also contributes to the accelerated formation of blockages, the accumulation of fatty deposits on the walls of pipes.
• If the siphon in the bath has not been installed correctly, or the sewer pipes are laid with a slight slope, the pipeline will clog too often and form blockages.
• The general deterioration of the system with rough inner walls of pipes contributes to the appearance of persistent odors and significantly accelerates the formation of blockages, preventing the dirt from quickly leaving the sewer.
• Prolonged lack of hot water when using the bathroom leads to the formation of greasy deposits on the walls of the pipes and the adherence of dirt to it.This narrows the passage channel and contributes to frequent blockages.

The principle of operation and types of nozzles on plumbing cables

No effort to protect the drain system in the house from clogging is guaranteed to be 100% successful. Even the smallest mesh on the drain hole and the constant use of hot water are not a guarantee of clean pipes. What is the reason for weed plugs in the drain system?

The main blockages in drain pipes:

• fat from kitchen utensils
• leftover food, hair, wool and other debris,
• pipe rust,
• sediment from running water.

The reason for the blockage of the riser or other veins of communication may depend on the pipes used, they are of two types:

1. Cast iron.
2. Plastic.

In the first case, cast iron tends to collect plaque and rust inside the pipe. Due to corrosion, the walls become uneven, which contributes to the collection of waste. Often, when dismantling them with a diameter of 110 mm, the patency was the size of a little finger (2–3 cm).

Causes of blockage

In any apartment or private house, a channel system is installed that removes sewage. However, regular operation leads to the settling of various contaminants, which leads to clogged pipes.

The main factors causing blockages are:

• The use of the pipeline for other purposes. Ingress of sparingly soluble substances and compounds into the pipeline: food residues, hygiene products and pieces of rags or sponges, which are pressed into a lump, thereby blocking the flow of water;
• Errors in the design of sewerage. If the installation of pipes does not comply with the norms, such as the angle of inclination, turns or pipe connections, then it is necessary to change the entire sewer system to prevent blockage;
• natural deposition process.The active use of soap, detergent and protein content over time causes corrosion, so it is easier for residues to linger on the surface of rusty pipes;
• Lack of prevention. To keep the pipes clean, it is sometimes necessary to carry out preventive measures - light pipe cleaning.

Prevention of blockages in the sewer system

In order to avoid such problems, it is worth adhering to some ordinary rules:

1. It is necessary to throw away leftover food in the trash before washing the dishes;
2. A piece of toilet paper, rags, sponges or hygiene products thrown into the toilet can gradually form a blockage, so it is necessary to throw household waste into the trash can;
3. The habit of washing off cement, sand and plaster residues through the sewer also provokes a congestion, so you should not resort to such actions;
4. It is worth applying a pipeline cleaner once within a month so that any residue does not accumulate on the surface of the pipes.

Rating TOP 7 best pipe cleaners

Our rating currently includes:

• "Antizasor";
• Gel for removing blockages "Sanfor";
• Bagi "Pothan";
• HG;
• "Tiret Turbo";
• Unicum "Tornado";
• Bagi "Shumanit".

Let's consider the selected models in more detail.

"Anti-blockage"

The anti-blocking agent is made in Russia. It quickly cleans sewer pipes from blockages, is able to dissolve deposits from grease, hair and perfectly removes unpleasant odors. Sold in a convenient package of 7 g (the size of the package itself is 13x9x1 cm) in the form of granules.

View	granules
Manufacturer	Russia
Weight, kg	0,07

Price tag: from 29 to 35 rubles.

anti-clog pipe cleaner

pros

• convenient packaging (sachets of 7 g);
• quickly copes with its task - 5 minutes.

Minuses

not intended for pipes in the kitchen.

Gel to remove blockages "Sanfor

Using the Sanfor drain cleaning gel, the result can be achieved in 5 minutes. The liquid can be used with any type of pipes in the sewer, even if plastic ones are present. The gel effectively dissolves food residues, hair and fat. At the same time, it kills the microbes in the pipes within 60 minutes.

View	gel
Manufacturer	Russia
Weight, kg	1

Price: from 170 to 200 rubles.

sanfor pipe cleaner

pros

• quickly copes with blockage - 5 minutes;
• large volume - enough for a long time (1000 g).

Minuses

poor quality packaging.

Bagi "Pothan

Pothang is a granular, very economical substance for removing blockages. Absolutely safe for both plastic and metal pipes. Qualitatively dissolves pieces of food, limescale, hair, paper. Produced in Israel.

View	granules
Manufacturer	Israel
Weight, kg	0,6

Cost: from 439 to 480 rubles.

bagi pipe cleaner

pros

• economical, enough for a long time (600 g);
• effective - granular acids dissolve quickly at the point of blockage.

Minuses

when using, it is necessary to ventilate the room well - the reaction gives an unpleasant odor.

HG

The Dutch two-component remedy is used to eliminate the most severe blockages caused by toothpaste residue, stuck food pieces, and hair in pipes. Depending on where the substance will be used (bath or kitchen), a different number of components must be used. That is, pour a different volume from two different bottles. Read the instructions carefully before use.

View	liquid
Manufacturer	Holland
Weight, g	2x0.5

Take: from 558 to 670 rubles.

pipe cleaner hg

pros

• universal - can be used both in sinks and in baths without fear for the plumbing coating;
• copes with the most severe blockages.

Minuses

it was not easy to fill in the liquid, you must follow the instructions; for the kitchen and bath, 2 substances are mixed in different quantities.

Tiret Turbo

An excellent tool - "Tiret Turbo", is designed to clean water runoff into the sewer. Produced in Russia and sold in a thoughtful container - a bottle with a sealed lid. Suitable for removing blockages in any pipes, including plastic ones.

View	Gel
Manufacturer	Russia
Weight, l	1

Get: from 433 to 500 rubles.

tiret turbo pipe cleaner

pros

• cope with any kind of blockage;
• elimination of unpleasant odors.

Minuses

Tiret effectively eats away organics, but if the pipes are old, then leaks may appear.

Unicum "Tornado

Regular use of a granular product will save you from problems with cleaning the sump and sewer pipes. Acts quickly and efficiently. Packaged in a 6x11x26 cm bottle with an interesting neck.

View	granules
Manufacturer	Russia
Weight, l	0,6

Price: from 262 to 300 rubles.

pipe cleaner unicum

pros

• domestic production;
• in the composition of more than 30% - sodium hydroxide.

Minuses

very strong smell.

Bagi "Shumanite

Shumanit, a granular remedy for sewer blockages, is produced in Israel and is sold in a compact package 9x7x3 cm. It perfectly dissolves hair, grease and various other deposits.

View	granules
Manufacturer	Israel
Weight, g	112

Price tag: from 105 to 130 rubles.

bagi pipe cleaner

pros

• works quickly (3 minutes);
• convenient packaging (112 g).

Minuses

when applying, do not breathe, wear gloves and long-sleeved clothing.

The best granular pipe cleaners

Granular means are used in difficult cases. They are distinguished by a high concentration of active substances and at the same time are easy to use.

Grupa Inco Ludwik "Hydraulic" - an economical tool

5

★★★★★
editorial score

97%
buyers recommend this product

"Hydraulic" - effective granules for removing complex blockages. They are sold in plastic bottles of 500 ml. The screw-on lid reliably protects the product from dust and moisture. The wide neck and well-designed handle on the bottle make it easy to pour the product into the drain hole.

To eliminate the blockage, a small amount of granules is enough, so the packaging lasts for a long time. For maximum effectiveness, it is recommended to fill the product with hot water. After use, there is no unpleasant smell left in the room, which is especially valuable when working in poorly ventilated sanitary rooms.

Pros:

• copes with complex blockages;
• convenient packaging;
• removes odors;
• economical.

Minuses:

• toxic composition;
• hard to find in stores.

The high efficiency of the "Hydraulic" granules is ensured by the increased content of active substances and, alas, by the toxicity of the agent. Therefore, when using it, it is necessary to strictly observe safety precautions.

Mole Tornado - active granules

5

★★★★★
editorial score

95%
buyers recommend this product

Mole Tornado is a granular pipe cleaner that tackles grease, hair plugs, and food debris.It is suitable for all types of pipes and does not corrode their walls.

To use, you need to pour the granules into the drain hole and pour warm water. For complex traffic jams, it is recommended to repeat the procedure. For the reagent to fully act, you need at least 1.5 hours. Granules are sold in tight plastic bags of 90 g. This amount is enough for 1 application.

Pros:

• low price (25 rubles per bag);
• found in most households;
• convenient packing;
• no smell;
• suitable for all pipes.

Minuses:

• can spoil the details of plumbing made of enamel or stainless steel;
• works for a long time.

Despite the fact that the product does not have a pungent odor, Mole Tornado must be used carefully. The dust flying from the pellets can cause allergies or irritation of the respiratory tract.

Bagi Professional Products "Shumanit" - against difficult blockages

5

★★★★★
editorial score

93%
buyers recommend this product

Shumanit granules cope even with complex traffic jams, consisting of soap and grease deposits, hair and food residues. For the action of the reagent, 5-7 minutes are enough. The product removes bacteria and unpleasant odors from pipes. This efficiency is due to the addition of a complexing agent, which is responsible for loosening dense plugs of organic and inorganic origin.

Pros:

• sold almost everywhere;
• copes with most blockages;
• acts quickly;
• eliminates bacteria and odors.

Minuses:

• high price (from 90 rubles per 70 g);
• an unpleasant odor remains in the room for an hour.

Bagi "Shumanite" due to its pungent odor can only be used in well-ventilated areas and requires strict adherence to safety regulations.

How to remove pollution in the siphon

The simplest case of a clogged sewer is that only one sink does not drain water. Most often, this problem occurs in the kitchen, a little less often in the bathroom. In this case, cleaning the sewer is the easiest. It is necessary to unwind the siphon, remove the debris there, wash the insides with detergent, and put everything back in place. If this was the reason, the drain should work.

Parsing

How to disassemble the siphon at the sink, see the photo. The lower part of the siphon is unscrewed - there is a regular thread. Before unscrewing, substitute some kind of container down - a certain amount of water will drain. Removing the lower part, you will see contamination. It is necessary to wash the removed part and clean the one that remained on the sink - there, between the walls, a decent amount of dirt accumulates. We delete everything, we clean it.

How to disassemble the siphon and clean the blockage of the sink

Under the bath, the siphon has a different shape. It is more difficult to disassemble, but if you do remove it, you will see a dense plug of hair and various plant residues there.

The siphon under the bathroom is more difficult to understand

In order not to remove the siphon, they usually try to get by with mechanical influences. In the picture on the left, you can see what a clogged tub looks like. The main task when removing it is to push the plug further into the pipe so that it goes into the sewer. To do this, they usually use a plunger - this is a rubber nozzle on a wooden or plastic handle.

How to clean without removing

The plunger is pressed tightly against the drain hole, water is poured into the bath / sink. Next, you need to sharply press and lift up the plunger handle, creating water vibrations that break up deposits and push the remnants further. At the same time, it is desirable that the rubber part of the plunger fits snugly, without cracks, to the surface of the bathtub or sink.Then, when it is separated from the surface (sharply press and pull towards you), a sharp push occurs, which best breaks the cork. This operation must be repeated until the water leaves without problems, forming a funnel. But even in this case, it is still desirable - for prevention - to clean the sewer using any of the fat-dissolving agents described below.

Bath clog removal method

If some members of the family have long hair, clogged tubs are most likely caused by them. Usually the hair clings to the grate, then dirt sticks to them and all this together blocks the flow of water. In this case, you can remove the grate, make a hook from a piece of wire and use it in the drain. Most likely, you will pull out something that looks like a dirty tow. Gradually, you will pull out everything that has accumulated there, it will be possible to wash off the remnants.

Blockage in the corrugation

There is another place in our sewer where blockages most often form. These are corrugated hoses. Their structure is such that it contributes to the accumulation of any debris. If the sink from which the corrugation comes from does not work, first check the siphon, then the corrugation. If everything is clean in them, but the water does not go away, the problem is somewhere further, in the pipes.

The corrugation is attractive because it easily adjusts to any length and is easy to mount / dismantle. So, take it off, clean it, put it in place (you can put a new one so as not to bother with cleaning).

If this "pleasure" does not attract you, you can try to clean the sewers with chemical means. They cope well with almost all pollution, in any case, they are good until everything is completely clogged.