Overview of the Electrolux ESF9423LMW dishwasher: a set of necessary options at an affordable price

Instructions for adding detergents

All Electrolux dishwashers have a similar structure, which makes it easier to follow the instructions for filling cleaning agents.First, you should add special salt, which will soften the water and provide a better wash.

In Electrolux household appliances, the substance compartment is located on the left in the near corner. The neck cap is unscrewed and salt is added. for dishwashers. Edible salt should not be placed, as this will damage the internal elements. You can add the product only before the next start of washing, otherwise the crystals that have fallen into the pan will cause corrosion.

Detergent is added in the form of powder or tablets to the compartment on the door on the left. With a half load, half of the substance prescribed by the norm for a specific dishwasher capacity is also used. On the right, there is a container for a glossing agent. It is filled to the top, making sure that the lock of the compartments has worked, after which you can proceed to the choice of the program.

Dishwasher testing

When a long-awaited device appears in the house, the owner wants to immediately turn it on and check its performance.

Don't be in a hurry. To begin with, you should carefully read the instructions so that the standard actions of the equipment do not seem like signs of breakdowns.

The operation of dishwashers from different manufacturers can vary significantly, so the manufacturers of the equipment draw up detailed instructions for the first start. Do not ignore their recommendations, otherwise you may encounter unexpected problems during the operation of the device.

The purpose of the dishwasher test

Before the first working inclusion, it is mandatory to test the dishwasher - they run one cycle without loading the dishes.

This test has several purposes:

• Cleaning.After manufacturing at the factory, traces of lubricants and small particles of debris remain inside the parts of new equipment. While the car is in the store, it is inspected, touched with hands, which leads to stains. The test run removes dirt and prepares the equipment for operation.
• Functionality check. During the first inclusion, defects in the manufacture of equipment appear. If it has been damaged during transit, this will also become apparent.
• Control of correct installation and connection. There are always unfortunate accidents in life. Installers could make a mistake when installing, connecting to a water supply or sewerage system. Sometimes they just forget to remove the transport elements. The test will reveal deficiencies.
• User training. Even if you bought not the first dishwasher, you still have to adapt to the new technology. Machines from different manufacturers have their own characteristics, and you need to deal with them before the device is put into operation.

For a test run, you will need a starter kit - detergent, salt and rinse aid. It is either bought separately specifically to test the machine, or use the one that is planned to be used for washing dishes in the future. This will help determine the amount of salt, the type of detergent.

Sometimes users make the mistake of running the first cycle without detergents, loading only salt. In this way, they are trying to save an extra pill or dose of gel. Do not do this. Hot water will wash away the technical lubricant, but traces of the greasy composition may remain under the rubber bands.

Idling procedure

First of all, the dishwasher is carefully inspected.You need to make sure that it is not damaged, and there are no foreign objects in the chamber. Sometimes foam sealing inserts, stickers, etc. are forgotten inside the device. If everything is in order, you can turn on the machine in the network, unscrew the valve that shuts off the water.

Then they act according to the following scheme:

Check if the machine is level.
All supply and return hoses must be securely connected and the joints sealed. Check it out.
Open the chamber door. You need to check if the atomizer rotates freely. To do this, you need to turn it several times.
The drain filter is unscrewed, thoroughly washed with running water with household chemicals, and then installed in place.
When choosing detergents, you need to find those that will not damage machine parts. The required amount of salt and rinse aid is calculated immediately to set the program for the future.
When all preparatory work is completed, the machine is set to the longest dishwashing mode without loading the basket

It is important that the temperature is as high as possible.
It remains only to close the door tightly, start the dishwasher and monitor its work. If everything is going well, there is no need to intervene and try to improve something.

To prevent the regenerating salt from sticking together while the machine is running, about a liter of clean water is poured into the empty compartment.

Only after this procedure it can be filled. The recommended amount of liquid is 300-500 g.

If the dishwasher itself does not determine the chemistry, you must manually enter the type of detergent and the salt supply mode into the settings. Modern machines remember the entered parameters.

Aspects requiring attention

While the dishwasher cycle lasts in test mode, you need to check the following functions:

• water supply - normally it flows smoothly, the machine does not stop;
• heating - you should make sure that the heating element is in order; it cannot be checked in the store, so only a test run can detect problems;
• drain - water should flow out completely and without delay;
• drying - you need to check whether moisture remains in the chamber after the end of the cycle.

How to choose and what to look for?

When buying a dishwasher, the following technical characteristics of the device should be considered:

• Washing and drying class. The higher the class, the more expensive the equipment. Class A dishwashers can wash even stubborn stains, after which they effectively dry the dishes.
• Water consumption. Water consumption depends on the specific model. Inexpensive freestanding machines can use 14-16 liters of water per cycle, while more expensive or desktop models can use 7-8 liters. In any case, this figure is much less than what you spend when washing by hand.
• Noise level. Modern manufacturers produce equipment with noise characteristics of no more than 55 dB. There are models with indicators of 42-45 dB. Built-in devices are less noisy than stand-alone devices due to their placement in the kitchen set.

A brief overview of the most popular models

In our country, dishwashers of the Electrolux brand are popular due to their reliability, functionality, and affordable cost. The most popular, according to user reviews, are models of the Electrolux brand in the following categories:

• compact, free-standing - "ESF 2400OH";
• built-in narrow - "ESL94200LO";
• narrow, free-standing - "ESF9453LMW";
• full-size, free-standing - "ESF9526LOX";
• built-in full-size - "ESL9532ILO".

"Electrolux ESF 2400ON"

The model has a stylish design, the door and control panel are made in red.

Model "ESF 2400OH"

It is a compact, stand-alone, leak-proof device with A+ energy class and overall dimensions: 438×550×500 mm (height×width×depth). Electrical power - 1.18 kW. The dimensions of the working chamber allow you to place 6 standard sets of dishes. The washing mode has 6 programs, including:

1. "20 Min Party Program" - "party".
2. "Eco": temperature regime - 55 ° С.
3. "Glass" - sparing, with a temperature of the detergent composition - 40 ° C.
4. "Intensive" - ​​providing the maximum effect (70 ° C).
5. "Normal": temperature regime - 65 ° С.
6. "Fast" - works at a washing liquid temperature of 40 ° C.

"Electrolux ESL94200LO"

This built-in dishwasher with a width of 45 cm is the leader in this category of devices.

Model "ESL94200LO"

Its distinctive features are ease of operation and the presence of a third basket for dishes. The dual hose used for filling provides leak protection and the small size allows for use in confined spaces. The model has an energy efficiency class "A", as well as five programs and three temperature modes for washing dishes. Overall dimensions - 818×446×550 mm, which allows you to load up to 9 sets of dishes. The upper basket can be adjusted in height and has a foldable cup shelf. On the lower basket there is a non-removable shelf for plates, equipped with a wire handle.

Electrolux ESF9453LMW

The model is equipped with sensors that control the flow and temperature of water, which allows you to optimize the duration of the washing process and, as a result, reduce the cost of electricity consumption. The presence of the AirDry technology, which ensures the opening of the door after washing, eliminates the possibility of condensation on the inner surface of the working chamber and washed dishes.

Model "ESF9453LMW"

This is a stand-alone device that will require the following dimensions - 850×446×615 mm. In the dishwasher, you can load 9 standard sets of dishes at a time and process them in four temperature modes using six programs. The model has a delayed start function limited to 24 hours.

Height-adjustable upper basket that is accessible even when fully loaded. It also has a collapsible cup shelf. The control panel has indicators for salt and rinse aid. Energy efficiency class - "A +".

Electrolux ESF9526LOX

Model with standard size of 850x600x625mm and standalone. Overall dimensions allow you to load up to 13 sets of dishes at the same time. Energy efficiency class - "A +", the body and facade of the machine are made of stainless steel.

Model "ESF9526LOX"

The model has four temperature modes and is equipped with five dishwashing programs:

1. "Eco": temperature regime - 50 ° С.
2. "Intensive wash": detergent temperature - 70°C.
3. "Normal": temperature − 65°С.
4. "Fast +" - the washing process takes 30 minutes at a washing liquid temperature of 60°C.
5. Rinsing and waiting.

The upper basket is adjustable and has a shelf for cups. Standard type hot water hose. The model is equipped with the "Start Delay" function, which is 3 hours.

"Electrolux ESL9532ILO"

This 60 cm wide built-in dishwasher is equipped with an intensive wash program for maximum cleanliness of your dishes. The overall dimensions of the model are 818 × 596 × 550 mm, which allows you to wash up to 13 sets of dishes at a time. The filling hose of the “Aqua control” type ensures the safety of operation from the appearance of leaks, and the sensor installed on the water supply controls the degree of contamination and consumption.

Model "ESL9532ILO"

Five programs and four temperature settings provide a variety of work options.

The upper basket is adjustable and equipped with a shelf for cups, and the lower one is a folding shelf for plates.

Overview of manufacturer's models

Devices have several series, which differ in size, capacity, cost. Below are the rating models that have gained their popularity due to user ratings.

Built-in standard

Full-sized built-in dishwashers from Electrolux have an average width of 60 cm. They are distinguished by large capacity and the presence of various modes.

Electrolux ESL 9531LO

A full-sized dishwasher is designed for 13 sets, while consuming up to 10 liters of water. The device is equipped with leakage protection, clean water sensor, condensation drying. The machine is controlled with 5 programs and 4 temperature modes.

Pros:

• there is a child lock;
• good capacity;
• there is a connection to hot water;
• low noise level.

Minuses:

• no water hardness adjustment;
• washes for a long time.

Electrolux ESL 7310RA

Built-in full-size PMM measuring 59 * 55 * 81 cm, despite its compactness, has a large loading chamber. It is designed for 13 sets of dishes. The adjustable basket allows you to load even large pots or large diameter plates. Using the digital display, you can set the desired program, and there are only 6 of them.

Pros:

• capacity;
• soundproofing;
• low water and electricity consumption;
• there is a "beam on the floor" function.

Cons: not found.

Built-in narrow

Due to its compactness, the built-in narrow dishwasher is in great demand among consumers. This is a great option for a small kitchen or a rented apartment.

ESL 94200LO

This model attracts with a budget price - from 15 thousand rubles. The total volume of sets is 9. The narrow-sized model supports 5 washing programs and 3 temperature modes. There is a hot dry mode. Both the hose and the body of the device are protected from leaks.

Pros:

• connection to hot water;
• compactness;
• reliable case;
• There is a half load mode.

Cons: increased noise level.

ESI 4620 RAX

Partially built-in model from Electrolux is designed for 9 sets of dishes. Has 6 programs of work and 4 modes of regulation of temperature. A special sensor is provided for automatic adjustment of water purity. For 1 cycle consumes up to 10 liters of water. Dimensions: 45*57*82 cm.

Advantages:

• capacity;
• compactness;
• low noise level;
• understandable management.

Cons: No door closer.

freestanding standard

This range of freestanding models is the easiest to install, requiring no additional tools.

It is important to have free space in the countertop or outside it

ESF 9552 LOW

Thanks to the automatic dish volume sensor, this model can save the maximum amount of water. Large capacity allows you to wash not only 13 sets of dishes, but also load baking sheets, pans and other large appliances. At the end of the wash, the door automatically opens, which is a nice bonus. Dimensions: 85*60*62 cm.

Pros:

• capacious;
• clear management;
• high-quality cleaning;
• noiselessness.

Minuses:

• no child lock
• uncomfortable basket;
• no water hardness adjustment.

ESF 9526 LOW

Large families will love this standard size floor standing model with 13 sets. The model is equipped with maximum protection against leaks. The laconic design will easily fit into the kitchen with any interior. There is no electronic display, but there is clear control using buttons and indicators.

Pros:

• the presence of a basket for cutlery;
• capacity;
• economical energy consumption.

Minuses:

• noisy;
• condensation collects on the door.

freestanding compact

There are several models in this category, but the more popular one is the ESF2200DW. Despite its compactness, the desktop PMM can accommodate large kitchen appliances. The dishwasher is controlled with 6 programs and 5 temperature settings. It can be put on the countertop, or it can be placed in a special cabinet under the sink. PMM is small and does not take up much space, convenient to use and saves time. Dimensions: 55*50*44 cm.

Pros:

• price;
• compactness;
• a large selection of programs;
• quality assembly.

Cons: pump noise when draining water.

Free standing narrow

This includes the ESF 9453 LMW model.Narrow PMM with a width of 45 cm with a stylish design will look harmoniously with any appliances and furniture. The case and an internal surface are made of qualitative steel. Thanks to folding mechanisms, dishes of various diameters and volumes can be loaded into the device.

Pros:

• automatic door opening;
• low noise level;
• convenient display;
• quality sink.

Cons: no child lock.

Suitable detergents for dishwashers

Manufacturers recommend using detergents and auxiliaries designed for dishwashers. Only they will guarantee the operability of the equipment and a long service life.

What can be used

The use of specialized detergents favorably affects the operation of the dishwasher. But very often these funds have a rather high cost. In order to save money, people begin to select analogues from a number of "folk remedies".

Products not intended for use in a dishwasher may cause the mechanism to malfunction or break. If you choose not a special powder, but a washing powder as a detergent, this can lead to increased foaming and failure of electronic programs.

And the use of ordinary salt instead of regenerating salt can lead to insufficient protection of heating elements from alkali metals contained in running water. And as a result, the accumulation of deposits and scale will lead to damage to the device.

Another danger that kitchen salt is fraught with is the lack of sufficient purification from natural particles, limestone deposits, and grains of sand.This can also adversely affect the performance of the equipment.

It is worth mentioning the comfort: regular salt must be poured into the machine with each use. And if you accidentally forget about it, then such forgetfulness will add scale to the heating element.

Water softening salt

Salt for dishwashers sold in stores and has the appropriate information on the label. It is a purified compressed crystals that do not contain impurities and slowly dissolve under the influence of a liquid.

The use of special salt for water softening will allow you to get rid of excessive scale on the heating element, which will significantly extend its service life. Salt helps to reduce the consumption of expensive detergents, as water with a high concentration of sodium chloride softens dirt and makes it easier for them to fall behind the dishes.

Why you need rinse aid

Rinse aid is a dishwashing aid. There are doubts about the rationality of the purchase, since many owners of dishwashers do not quite understand what the point of using it is.

Conditioner is needed to give the dishes:

• mirror shine;
• radiance of purity;
• the smell of freshness;
• characteristic creak.

Rinse aid removes traces of streaks from the surface, it does not allow drops to linger on the dishes. Thus, the dishes at the exit shine, as if they were specially rubbed. In addition, the tool performs a protective role and further protects the dishes from stains and handprints.

Another important function is that the conditioner helps to remove from the dishes all the remnants of aggressive surfactants contained in the detergent, and also neutralizes alkaline acids.

Special detergents

Such formulations contain solvents that allow you to easily deal with dirt and food residue on your dishes. For ease of use, they are available in various forms:

• tableted;
• powdered;
• gel-like.

The most popular compositions

Tableted	gel-like	Powdered
Finish Quantum	clean home	Claro
BioMio Bio-total	Five Plus	Sodasan
Clean and Fresh all in 1	Finish	Bravix
Minel Total 7	Fairy	Somat Standard
Frosch Soda	Somat	snowter

It is necessary to select a detergent depending on the type of dishes, the degree of soiling and the mode. There are several categories.

Aggressive products containing chlorine have an excellent whitening effect and are able to remove the most stubborn stains. Not suitable for dishes from:

• porcelain;
• crystal;
• silver;
• cupronickel;
• with hand painting.

• More gentle substances containing weakly alkaline substances are enzymes. They cannot boast of a bleaching effect, but they are able to remove dirt from dishes made of fragile materials.
• Safe substances containing natural ingredients are marked with the prefix "Eco". They are inferior to the first two categories in terms of the quality of washing dishes, but they are absolutely safe. Do not cause allergic reactions. The composition includes:

• soda;
• natural essential oils.

Dishwasher Electrolux ESL94201LO

Angelina. Built-in type machine, width 45 cm. Before buying, I read a lot of positive reviews about this model. And my review is not so positive.

From the very beginning of work, the sink behaved unpredictably. My first problem with it is that the programs crashed, the program simply interrupted. Inexplicably, over time, the problem disappeared on its own. The second is management issues.And in addition, she began to flow. At first there was a slight leak (a couple of drops), and then more seriously. I had to call a specialist. I regret the choice.

Among the advantages:

• Laconically fit into the furniture set in the kitchen.
• It does not consume much water and electricity in operation.
• It has a practical program - quick washing, which is economical in time.

Flaws:

• Leak proof legend. I didn't think the technology was that bad. This can be fraught not only for your apartment, with such equipment it is easy and simple to flood your neighbors.
• Deals with pollution to no avail. Heavy pollution is an insurmountable barrier for her.

Dishwasher connection

Do-it-yourself dishwasher connection is carried out in the following sequence: drain, water, power supply. Recommendations - well, they say, anyway, are untenable already because the fittings and inputs on the machine itself are located based on just such a safe connection order. Those who want to do it their own way will have to work hard and probably redo it.

Stock

To connect the dishwasher to the drain, you just need to pull the drain hose onto the fitting. But two conditions must be met:

1. Upper bend. It will prevent the drain from the sink from getting into the dishwasher (circled in red).
2. Lower knee (circled in brown in the picture). This is the same water seal as in the sink or toilet. For a washing machine, a water seal is especially important: if the drain is empty, the miasma from the sewer will not go into the air, but into the enclosed space of the dishwasher. Therefore, the lower knee should be made as deep as possible, and its bend as short as possible.

Sometimes you can find recommendations - to solve the problem of draining by leading the drain hose straight into the sink.This cannot be done for the following reasons:

• The drain hose may slip out of the sink and drain from the sink onto the floor.
• The sewage pump of the machine, in order to pump the drain high, will have to work with an overload, and it will quickly fail.

Water

For any type of washing machines, it is strongly not recommended to connect hot water to the water supply. Firstly, the savings on heating water here are apparent: hot water costs more than electricity. If you already have an electric boiler, then you yourself know this.

Secondly, the quality of hot water is inevitably worse than cold water: its path from the water intake to you

longer and more complex - through the boiler room, where it comes into contact with the metal of the water heating system, and through additional pipes. All over the world, in contracts with subscribers, water supply organizations write that it is impossible to use hot water for cooking.

On the dishwasher, this affects very specifically and unpleasantly: the non-return valve fails. With proper installation, there will be no leakage to the floor, but an unpleasant smell from washed dishes may appear.

Actually, connecting the dishwasher to the water supply is done like this:

• We turn off the water in the apartment.
• We disconnect the cold hank of the kitchen faucet from the pipe; We remove the old waterproofing and throw it away.
• We attach a tee to the pipe, connect the mixer to it again and, in series, the filter (circled in blue in the figure), the ball valve and the dishwasher handle. Do not forget to isolate all threaded joints with a fumka.
• Check if the ball valve is closed.

Since the additional outlet is already installed, just plug in the dishwasher's plug.

Leak test

We turn on the water in the apartment. Then, without turning on the dishwasher, open its stopcock.Check to see if it's leaking anywhere. We turn on the dishwasher, start the test mode, or simply lay a portion of the dishes and wash. So nothing has flowed anywhere - we leave the stopcock open, the automatic machine of the machine is turned on, and we use it.

Video

We offer you to watch a video on the topic of the article:

An expert in the field of housekeeping and a master of culinary masterpieces (according to relatives and friends). She got used to relying on common sense, worldly experience and female intuition.

Found an error? Select the text with the mouse and click:

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m 2 of its area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

If the first signs of gestation in the form of untidy pellets appear on your favorite things, you can get rid of them with the help of a special machine - a shaver. It quickly and effectively shaves off clumps of fabric fibers and returns things to a decent look.

Rates

The cost of repairs depends on several factors: the complexity of the breakdown, the need to install new parts and additional work to remove the machine from the furniture. Here are approximate prices for signs of malfunction without accounting for the cost of new parts.

Symptoms	Repair time	Price *
Home visit and diagnostics**	in 24 hours	0 rub.
No drain	20 to 70 minutes	from 1600 rub.
No water heating	from 30 minutes	from 1300 rub.
Washer won't turn on	from 40 minutes	from 900 rubles
Doesn't flood water	15 to 60 minutes	from 900 rub.
Does not dry dishes well	from 30 minutes	from 1200 rub.
Doesn't wash	from 10 minutes	from 1000 rub.
Leaking from below	from 20 minutes	from 1200 rub.
Door won't stay open	20 to 60 minutes	from 1200 rub.

* Spare parts are not included in the price and are paid additionally

**Departure and determination of the breakdown are not paid with the consent to the repair

If you know the causes of the malfunction, see the price list for repair work on individual nodes.

Name of works	Repair time	Price *
Home visit + diagnostics**	in 24 hours	0 rub.
Replacing the heating element	30 - 60 minutes	from 1900 rub.
Drain pump replacement	30 - 70 minutes	from 1700 rub.
Cleaning filters	15 – 30 minutes	from 1300 rub.
Drain hose replacement	20 - 40 minutes	from 1500 rub.
Replacing the door seal	20 - 30 minutes	from 1200 rub.
Dishwasher door repair	20 - 60 minutes	from 1200 rub.
Control module repair	40 - 90 minutes	from 2700 rub.
Replacing the KEN (filling valve)	30 - 60 minutes	from 1600 rub.
Replacing the circulation pump	40 - 70 minutes	from 2400 rub.
Replacing the water level switch	40 - 60 minutes	from 1700 rub.
Replacing the inlet hose	10 - 20 minutes	from 1000 rub.
Replacing the control module	30 - 80 minutes	from 2300 rub.

* Spare parts are not included in the price and are paid additionally

**Departure and determination of the breakdown are not paid with the consent to the repair

Getting ready for the first launch

The first dishwasher start Electrolux, Bosch or any other is a kind of acquaintance with new technology. Feel free to be curious, the more you strive to get to know the dishwasher, the faster you will learn how to use it correctly. Experts have developed a certain procedure that is recommended to be done before the first start of the dishwasher, let's look at it.

• You need to make sure that the Electrolux, Bosch or any other dishwasher is plugged in and the water supply tap is open.
• We open the washing chamber and make sure that the impeller rotates normally, the filters (which are nearby) are installed, and there are no foreign objects on the walls of the chamber, such as stickers, foam balls and other things.
• Next, you need to get a starter kit for dishwashers. It is specially designed by the manufacturer in order to start the dishwasher for the first time. It is up to you which set to purchase, our experts prefer Filtero, although there are many other good options. Read more in the article Dishwasher Starter Kit.
• The first thing we need to get from the starter kit is salt. Salt is needed by the dishwasher to regenerate the resins of the ion exchanger, which in turn serves to soften hard water. Salt must always be present in a special salt tank, this must be strictly monitored. Pour a little water into the salt reservoir, and then pour salt into it and stir.
• Now we take out a special powder from the set for the first start of the dishwasher and pour it into a special cuvette for detergents in the powder compartment. Instead of powder for the first run, you can use regular dishwasher powder.

• Next, you can turn on the Electrolux dishwasher or another and select a washing program. Find the longest high temperature wash program and run it empty. When you start the dishwasher for the first time, the baskets must be empty. Save the dirty dishes for the second run.
• The first start-up of the dishwasher with special means is designed to clean the unit from the inside of dust and residues of machine oil, so that later all this does not get on the dishes. At the end of the program, make sure that the waste water goes down the drain normally, unplug the machine from the mains and open the door a little so that moisture evaporates from the washing chamber.

How to start the dishwasher in the future?

The first start was successful, which means that the dishwasher is ready for long-term operation in normal mode. How to run a dishwasher every day, because just like that, “as God puts it on your soul”, you can’t do it. In this case, there are also rules, which, by the way, are described in the instructions for the dishwasher. Let's analyze these rules and remember them well!

1. Remember to add detergent and rinse aid before each dishwashing.
2. Load the dishes into the baskets correctly, according to the instructions. Do not overload the baskets, this will affect the quality of the wash.
3. Before placing dishes in the wash baskets, do not forget to clean dishes, cups, spoons, etc. from food residues, since large pieces do not pass through the filter, clogging it.
4. Before each start, check how well the rocker rotates and whether its nozzles are clogged with dirt. In addition, also inspect the filters and clean them if necessary.
5. Choose a washing program that is adequate to the level of soiling of the dishes, there is no need to waste too much water and electricity on lightly soiled plates and bowls.

Washing tips

In order for the Electrolux, Bosch or any other dishwasher to wash dishes well, while not wasting too much time, water and electricity, you need to correctly select the washing program.Moreover, you need to study all the programs “available in the arsenal” of your dishwasher in order to use them if necessary. Most users do not particularly bother, choose the most convenient program for them, and then use it constantly in all cases, even when it is unjustified.

First dishwashing

After performing a test run, making sure that the device is working correctly, you can proceed directly to operation. To do this, you need to acquire special detergents and carefully study the instructions. Then, having decided on the choice of programs, you can start using the device.

The market offers many options for chemicals for the first run of the dishwasher. Making a choice can be quite difficult. When buying, you should consider the following nuances:

1. Release forms. The drug can be produced in the form of a gel, powder, capsules, tablets and granules. Their dosage, dissolution rate and the final result of use depend on this.
2. Compositions. The composition of the product may include various active substances. All of them are responsible for performing separate tasks.
3. Degree of security. Aggressive products can be toxic. Therefore, when choosing them, one should take into account the purpose of use, whether there are old people, children, allergy sufferers, people with asthma in the house.
4. Price. The use of a dishwasher makes life easier for housewives. But at the same time, it is necessary to take into account your financial capabilities and calculate in advance the costs allowed for servicing the PMM - dishwasher.

Before you buy them, you should carefully read the composition. The set of active ingredients is selected according to the type of dishes and how dirty they are.

If there are allergy sufferers, small children or asthmatics in the house, then you should give preference to products with an eco-composition. They do not contain dyes, aggressive chemicals and other dangerous components. Unfortunately, they are not as effective as chlorine and enzyme containing products.

Buying and running a dishwasher for the first time is an exciting experience. Great hopes are placed on household appliances. It is she who should save the hostess from unpleasant everyday work. However, before starting active operation, it is necessary to test the unit. Don't know how to do it?