Is the shower system suitable for the faucet: how to determine?

Varieties of racks

In terms of their appearance, design, dimensions and additional functions, shower racks can vary greatly among themselves. The choice here is practically unlimited - manufacturers take into account all possible, even minor, wishes of customers, and everyone can find an option that would fit perfectly into the bathroom.Therefore, we will consider only the main, basic varieties of shower racks.

Shower column with rain shower and faucet

Such a shower rack, perhaps, can be called one of the most comfortable. It is more convenient to use than a separate shower and faucet, and besides, the whole set is made in the same design style. By the way, this option is often cheaper than varieties without a mixer.

True, you must again not confuse the shower column complete with a mixer and just a mixer, to which a watering can bar is attached. These are completely different things - a shower stand with a mixer allows you to get rid of the hose, which many would dream of, but the mixer with a rod in the kit does not provide such an opportunity.

Water in such a shower rack can be supplied either directly through the bar to the watering can, or through a flexible hose, or in both ways - it depends on the specific rack modification. But in any case, the adjustment of the pressure and temperature of the water will be right at your fingertips at a convenient height - you don’t have to reach or bend over for it.

Shower column without faucet

This is the simplest modification of the shower rack - the bar is installed separately from the faucet in any place on the wall, and a watering can is hung on a special mount on a flexible hose. Unfortunately, in such a system, the hose is still a weak point - but thanks to the movable mount, the height of the watering can be adjusted, and additional soap dishes and hooks can be installed on the bar. A rain shower can also be present here.

Shower column with faucet

The main convenience of such a rack is the ability to shut off the water in the shower with a special lever. But to change the height of the watering can, as a rule, in such racks is impossible.In addition, certain connection problems may arise - for example, it will be difficult to attach the stand to the faucet, where the shower hose is connected from below.

Shower column with overhead shower

As a rule, there are two watering cans in such racks - a large one and a small one. The large one, fixed at a height, functions as a rain shower and can reach almost a meter in width, while the second, small one, is a watering can on a regular flexible hose and is hung lower. It is easy to remove and adjust. Such a system is very convenient - if you want, you can stand in the "pouring rain", and if necessary, use an ordinary shower, even sitting on the bottom of the bath.

Rack with spout

By design, the spout is a “spout”, from which a kind of waterfall pours into the bath. Such racks are intended mainly for convenient filling of the bath, they are also used as a cascade shower. The bar of such a rack is equipped with a special switch from spout mode to shower mode.

Another modern option that is popular is the so-called hidden shower rack. Its device in design differs little from other varieties - it’s just that at the first stages of repair in the bathroom, the rod “hides” into the wall, and only a fixed watering can and control levers remain to protrude.

How convenient this option is is a moot point. Of course, the hidden shower column looks very stylish, and visually a lot of space is freed up in the bathroom. But at the same time, the hidden rack can no longer be supplemented with soap dishes, cups, hangers and a thermostat. And the watering can itself cannot move up and down and change the angle of inclination - which means that in this version half of the functionality is lost.Therefore, it is wiser to install hidden shower racks where appearance and originality are more important - that is, in fairly spacious bathrooms.

As already mentioned, almost any type of shower rack can be attached to a thermostat - a device that determines the temperature of the water and regulates it. In addition, if desired, the bathroom can be equipped with multi-colored LED lighting. If your choice is a stand with a rain shower option, this lighting will be a particularly good solution. After all, the benefits of chromotherapy in combination with adjustable powerful rain jets are doubled - after taking a rain shower after a hard day, you will feel just reborn.

thermostatic devices

Thermostats are a new version of taps. This is a panel that is mounted on the wall and has electronic control buttons. The main feature is that it maintains the set temperature, and the buttons also turn on the water. Advantages - ease of use, easy to install, reliability, stylish design. But thermostats are expensive and difficult to repair.

Another new type of faucet is touch-sensitive, there are sensors in the device, they react if you bring your hands to the faucet. The device is powered by electricity or batteries. The spout of such mixers is flat and without an aerator, the water pressure is quite powerful.

Cascading devices do not have an aerator and have a larger and flatter nozzle, which provides a strong jet of water. For such mixers, pipes of large diameter are needed, the devices are powered by the mains or batteries.
Switches from watering can to spout

Switches from a watering can to a bath are of several types.

• Ball
• eccentrics
• Cork
• Cartridges

The eccentric is a double-sided rod, depending on the position in which it is, water will go to the spout or to the shower and vice versa. The eccentric itself is quite bulky and large in weight, it can loosen over time, the gaskets can wear out.

There are switches in the form of a cartridge, they are smaller in size than eccentrics and more practical, have a beautiful appearance, are made of brass, and last a long time. The only negative is that the cartridge cannot be repaired.

The ball deviator is a brass ball with holes and round rubber gaskets. It will depend on its position in which of the holes the water will go - to the spout or to the shower. This type of switch is quite good in quality and usability, but it cannot be repaired or replaced.

Varieties of hygiene systems for the toilet

Among all the systems equipped with a hygienic shower that can be equipped with a bathroom, there are several main types:

wall shower

The most common type of equipment is a mini-bidet. The system includes 4 main components:

• mixer;
• shower hose;
• watering can-bidet;
• wall mount.

Wall hygienic shower for bathroom

As a rule, the faucet is installed with the marking "for bidets and showers". They do not have a tap to fill the tub and when started, the water is directed directly to the shower system. According to the principle of installing the mixer, this type of mini-bidet can be divided into 2 more subspecies:

• with a flush-mounted faucet, when on the wall surface there is only a joystick for controlling the water supply and a separate outlet for the bidet hose of the watering can;
• with an open-type mixer - the mixer-hose-watering can is located in an open space.

Open mixer

Attachment-bidet to the toilet

Pretty rare system. It is a unit mounted directly on the toilet bowl. The range of faucets in supermarkets is presented in a complete set:

• a platform for installing a mixer, equipped with a mount for a watering can;
• mixer;
• shower hose;
• shower head;
• pipes for hot and cold water supply.

Attachment-bidet to the toilet

The faucet is similar to the model designed for washbasins. The difference is the spout. Instead of an aerator, from which water enters the sink, the product has a threaded connection. A hygienic shower is screwed onto it during installation.

Washbasin combination faucet

Such a system is common in a combined bathroom. The faucet, mounted on the washbasin, has an additional outlet, which connects it to the mini-bidet shower system. The branch pipe is located on the bottom of the product in close proximity to the water supply hoses. Sometimes the manufacturer completes the mixer with a special adapter, in the form of a tee. It is screwed onto the spout, and a shower hose is mounted to the auxiliary hole.

Connecting the mini shower to the main faucet

When choosing a hygienic shower system, every detail must be considered. If the repair in the bathroom has already been completed, and the user decides to equip the mini-bidet room with a built-in mixer, it must be realized that the area in which the installation work will be carried out will have to be dismantled. In this case, the best option would be to output an open mixer.

Advice. The hose for the bidet system is selected not very long.To avoid twisting and creases, 100-125 cm will be enough. Depending on the location of the mixer.

In some cases, a small bathroom is equipped with a small washstand, no more than 45 cm wide. The most convenient thing would be a corner sink installed above the toilet. Such a trick will allow not only to install a mixer with a mini-bidet system, but will also make it possible to carry out other hygiene procedures.

Small hand basin with mini shower

Product varieties

Today's market for hygienic shower models is represented by several options. Each of them has its own characteristics and features in the application. The water connection can be hidden in the wall, as well as located in a conspicuous place. In this case, built-in models imply some kind of repair if the device breaks down.

The design of the device is simple and in order to use it, you just need to press the button located on the watering can, before opening the mixer valve.

If a thermostat is provided on the watering can, then the temperature is set only once, and subsequently it remains the same as it was set. In this case, the shower system will remember the desired temperature and will output it every time you turn on the watering can.

In order not to bother with repairs, in the process of connecting water to the mixer, simply lay the necessary pipe by connecting it to the nearest plumbing fixture.

Hygienic shower with sink. If the bathroom involves the location of the sink next to the toilet, then you must choose a faucet equipped with a third outlet for water. Then, if necessary, water will be supplied to the shower head.Such a device works like this: when the tap is opened, water is supplied to the nose of the mixer, and is held there until the control button is pressed. As soon as the button is pressed, the water flows to the hygienic shower head. Such a shower model will perfectly fit into a small-sized or combined bathroom. A variety of product options, allows you to fix the shower directly on the sink. And if the bathroom is very small, you should try to choose a sink with a corner placement, which is installed above the toilet bowl. Such a move will save additional space in the room.

Installation of this type of hygienic shower is quite easy and is equivalent to installing a conventional sink. The main design feature: mixer with a third outlet. After using the tap, do not forget that it is necessary to turn off the mixer, otherwise the water from it will flow into the sink.

Toilet-bidet. This is a multifunctional device that looks like a standard toilet, but is equipped with a special nozzle for water supply. The nozzle must be retractable and have a power button. Usually it is placed on the rim of the toilet bowl.
The water supply to the mixer in such devices is connected to the installation from below through a separate hose.

Such a universal device is good because it can be used both in conventional toilet bowls and in hanging ones, which significantly saves space in the bathroom. The design of the installation itself is a metal frame on which the bowl is attached. By pressing the button on the toilet, the nozzle extends and supplies water at the desired temperature. At the end of use, the nozzle hides in its place. The pipe connection to such a toilet bowl - bidet is carried out behind a false wall.The model is compact, but has a high cost, which depends on the set of additional features and the manufacturer.

Bidet cover. Another option for a hygienic shower. Such a cover has a certain set of functions, which may include heating water to the desired temperature. The toilet lid is portable. It is equipped with control buttons that allow you to select one or another function. The lid itself is connected to the sink or to the tee, which is responsible for supplying water to the drain tank.

Bidet covers are mechanical and electronic. The latter option is mains powered, more expensive, and may have additional features. However, in the absence of electricity, the possibility of using a bidet cover is reduced to zero, due to the fact that the water will be heated from the power supply.

A variety of models allows you to choose exactly the option that is most suitable for a bathroom with certain conditions.

Switching mechanism “spout - shower”

The mechanism for switching between spout and shower is:

• push-button - to switch the flow, you must press the button or raise it. Such a system quickly becomes unusable due to the weakening of the spring and valve wear;
• lever - the mode is adjusted by turning the switch by 90 - 120 ℃. This is a fairly reliable mechanism, but in the event of a failure, it is difficult to find a compatible element;
• ball - to turn on the shower, turn the handle 180 ℃. This is a quality construction that lasts a long time. But in the event of a breakdown, it is impossible to repair it - you will have to change the mixer.

Functions and Benefits

Consider the functionality of the devices.

Rigid faucets are usually equipped with a rain shower head. The watering can itself has a large diameter, sometimes up to 500 mm, thus you seem to fall under the rain, and the water does not fall in a separate stream, but from all sides. It is very convenient, in addition, there is some anti-stress effect and massage qualities.

If the rack has a panel design, it can be equipped with additional jets for hydromassage. Such models are quite expensive, but their owners are always satisfied and leave rave reviews.

A large set of additional features and capabilities is the hallmark of modern plumbing.

A removable watering can, like a stationary one, can have several modes of water supply: form raindrops, jets, fog. This will help you choose the most suitable shower mode for your current mood and get real pleasure from water procedures.

The faucet spout usually has an enlarged internal section for greater throughput. This allows you to fill the bowl faster if you prefer to take a bath in the traditional way.

Pleasant lighting and rain jets will turn an evening shower into a real adventure.

Among the advantages of faucets with racks, you can list the following qualities:

• High reliability;
• Attractive design;
• High throughput in comparison with a hose;
• Watering can of large sizes with the "tropical shower" function;
• A wide range of additional features.

Watering cans have several modes of water supply.

Manufacturers

The quality, performance properties and service life of the mixer largely depends on its manufacturer.

It is for this reason that it is recommended to pay special attention to the brand of products.

So, at the moment, Hyber, Kermi and Huppe are among the most popular German brands.

In addition, the indisputable advantages include a wide range of products and the functionality of mixers. Certified devices that fully comply with all applicable standards are made of alloyed bronze and high-quality stainless steel.

Cerutti and Jacuzzi brands represent Italy in the ranking of world market leaders in sanitary products. The products of these companies belong to the premium segment. Naturally, the list of advantages does not include low cost, and in Russia there may be problems with the acquisition of components if repairs are necessary. However, this is fully offset by high quality and performance.

Italian shower faucets are equipped with integrated heaters, multi-profile diverters and electronic thermostats.

Finnish companies Timo and IDO Showerama offer high-quality sanitary fittings for shower cabins of various models. Manufacturers give a five-year warranty on their products.

It is worth noting that due to a sharp increase in demand, Timo launched production facilities in Hong Kong. According to some reviews, such a decision had a negative impact on the quality of products.

Spout: features and specifications

The part, also called the gooseneck, is a tube with which the shower is attached to the faucet. The long spout is of a swivel type, which allows it to be moved in any direction.In the production of ganders, several technologies are used that affect the characteristics of the finished product.

Below are some of these models.

Tubular

When creating such products, the ganders are bent to give them the desired shape. This type of spouts is the most popular due to the simplicity of design and low price. A plastic ring is located at the junction, which ensures the fixation of the joints and prevents the occurrence of leaks. The end of the tube is adapted for installation aerator - mesh filter for the mixer.

Soldering

The main distinguishing feature of such models is the variety of shapes and sizes. Metal blanks are bent and inflated, due to which tubes of different diameters are obtained. Nuts are located at the ends, ensuring the integrity of the structure and intended for the installation of an aerator. The price of these spouts will be higher than the previous options.

cast

The body of such spouts is monolithic and the most durable. Models are made of durable brass, so they weigh relatively much. At the same time, they are characterized by greater reliability, because the performance of the entire mixer depends on the integrity of the gander. Such a system will cost more, but its service life will also increase significantly.

What functionality can a bathtub stand with faucet have?

Modern shower system with overhead shower can be supplemented with:

• massage mode of a manual watering can - an increased number of narrowed nozzles give out water under increased pressure;
• top watering modes - expensive Grohe shower racks with a mixer and an overhead shower have from 1 to 3 modes, but systems from Hansgrohe - up to 5;
• a wall-mounted holder for a hand shower - a classic shower column with a mixer is available with a holder on a bar;
• easy cleaning system - faucets and shower systems are complemented only by European manufacturers;
• push-button switches - a shower column with a spout is equipped with an extended side of the bar, on which control buttons are placed;
• shelf for detergents - a shower rack with two watering cans and a spout (without a spout) has an enlarged horizontal mounting bar. It is made in the form of a wide shelf.

Full-featured plumbing fixtures are commonly referred to as shower columns with a mixer and an overhead shower due to the increased dimensions of the rod. The Hansgrohe Rainmaker Select 460 3jet Showerpipe 27106400 is an example of a functional design device. Of course, a shower stand with a mixer of this class will cost 80% more than classic models.

How to calculate the installation height of the faucet in the bathroom

When calculating at what height to install the mixer above the bathtub, a distance of 200 mm is taken as the standard, however, practical experience shows that the installed tap can be located at any distance convenient for the consumer. However, in the process of calculating the installation, several basic rules should be observed:

1. Before installing the faucet in the chosen place, attach it to the wall, try it on in height, see if the spout will interfere, evaluate the convenience of such an arrangement of the device.

2.Remember that if you want to install a shower column with a mixer, then the distance from the bottom of the bowl in this case must be at least 1200 mm.

3. When calculating the final height of the faucet above the bathtub, many people make a serious mistake, taking the height of the bowl itself before its installation as a reference point. This is wrong, because in order to ensure greater stability of the bathroom, sometimes you have to resort to the fact that you need to put special stands. As a result, it may turn out that the mixer height of 20 cm verified by previous calculations will “fall” to 10 cm, as a result, the faucet will hang over the bowl, which will not only spoil the appearance, but will also create some inconvenience during use. In addition, not all models of sanitary faucets can be installed at such a short distance.

4. It will not be superfluous to make pre-measurements and calculations of the distance of the mixer from the edge of the bath. This is useful for those who plan to turn the faucet from the sink to the bath and back in the future. Consider the height of the sink itself, models with a height of less than 850mm are extremely rare. To these parameters it is necessary to add the dimensions of the mixing mechanism and centimeters between the sink and the spout - here it would be better to make a mistake in plus than in minus.

5. Installation volumes are also affected by additional accessories that are often equipped with modern faucets - for example, water softeners, as well as the wishes of those who will use the bath, some prefer the faucet above the bath to be located a little higher - this allows you to wash your hair without filling it bath water or take a shower.

6.When installing the faucet on the surface of the bathroom wall, it is necessary to avoid that the structure is attached to the tile, namely to its borders - in this case, the rough texture of the material coating will not allow the faucet reflectors to be tightly fixed. Because of this, the installation height of the crane is often associated with the height of the curb layout (most often it is 1 meter from the floor level).

Follow these simple rules, and the mixing device will serve you for a long time.

Accessories

The durability of the mixer depends on quality components.

Crane box

This is often a weak point in cranes. Such a detail helps to turn the water on and off. If the faucet began to leak or drip even when closed, then the faucet box broke. This is the main component of valve-type mixers.

If a breakdown suddenly occurs, it is important to replace the part and choose the right size. And you can do it yourself, without the help of a specialist.

It is important to contact the store with a broken crane box so that there is no error in size. Crane boxes are worm and ceramic

The former are cheaper than the latter. The service life of the worm gear is short. In addition, they produce more noise during operation and are not very smooth when turning the valve.

Ceramic crane boxes are resistant to various temperatures and last much longer. To open the tap, it is not required to make such a number of revolutions as when using a metal part, which is much more convenient and comfortable to use.

Screen

In touch models of luxury mixers there is a touch screen with which you can set the temperature of the water flow and other parameters.Some very expensive and innovative models include the ability to access the Internet, view e-mail and turn on music. This is a nice addition, but it is expensive and not used by all consumers.

Mounting sequence

The principle of operation of the hygienic shower mixer. 1. Mixer. 2. Hose connection. 3. A watering can with a shut-off valve.

Before you install a hygienic shower in the toilet, understand the configuration of the device. During the installation process, you will need the following devices:

• The watering can is the main element of the design. The size and shape of the device do not matter much (for many manufacturers, they are almost identical). The main difference is usually in the design. An equally important point is the ability to adjust the water supply. Various options are available here, ranging from a thin but powerful jet to a stream like a classic shower.
• A faucet is a device that controls the temperature of the water. Several options are possible here - a thermostat or a lever model. In the first case, the temperature is set only once, after which the system automatically adjusts the desired mode.
• Hose - a device that provides water supply and has a length of up to 2 meters. Give preference to products made of rubber or polymer materials. The presence of a protective outer layer of silumin or plastic with metal elements is highly desirable. Budget devices come with plastic hoses, but they quickly fail.
• Accessories. This includes elements for fixing and connecting a hygienic shower, namely adapters, attachments for a watering can and others. For greater reliability, these components should be made of brass or bronze.In budget models, silumin stainless steel is used, but its disadvantage lies in a small resource and the risk of breakage in the event of an increase in load.

Now let's start installation hygienic shower in the toilet. The connection diagram is as follows:

Wiring diagram for a hygienic shower.

Decide on the device model. Choose the point where the thermostat (faucet) with a clamp for the watering can is attached. Average installation height - 80 cm from gender.

Prepare the strobes using a perforator. Bring pipes with cold and hot water. Connect the pipes to the cold water, hot water system (before that, do not forget to turn off the water supply).

Seal the strobes with mortar, and you can start decorating the walls (laying tiles, applying paint, and so on).

The water supply and the flush-mounted mixer are hidden in the strobes.

For hot and cold water outlets install a faucet or thermostat. Tighten the nuts well to avoid leaks. Act without fanaticism so as not to accidentally violate the integrity of the thread.

Scheme of connecting a hygienic shower to the water supply.

Make a mark where the watering can will stand. Check again that the axle spacing is correct. Using an anchor, secure the mount for the watering can (if it acts as an individual device, and not part of the mixer).

Screw a tube with a watering can to the outlet part of the thermostat or mixer (the device is attached with a threaded connection).

Open the water supply taps and check the tightness of the joints. Select the appropriate temperature and close the mixer.

Drain the water to flush all hoses and pipes, after which the device is available for use.

How to use the hygienic shower in the toilet

It is necessary to install the shower in the socket every time after use, so that the hose is in a straightened position

Before buying the above equipment, you should familiarize yourself with how to use it correctly so that it lasts a long time and does its job perfectly.

Instructions for the correct use of a hygienic shower

The device is used in the same way as a conventional shower, except that the hygienic one is intended for use exclusively over the toilet. Therefore, its operation should not cause particular difficulties. Difficulties can arise only when setting the required water temperature. To avoid this, a hygienic shower is equipped with a thermostat.

Having once adjusted the temperature regime of water supply to the watering can, the thermostat is adjusted to maintain the set value in a constant mode.

Common mistakes in the use of a hygienic watering can

This option is perfect for small toilets.

The most common mistake when using a hygienic watering can is:

• closing the mixer is not completely, which further leads to leakage and the appearance of rust or plaque inside the device;
• twisting of the hose, in connection with which it is damaged and leaks;
• insufficient care and rare cleaning, which again accelerates the failure of plumbing.

Thus, a hygienic toilet shower can be confidently called a multifunctional and practical device that significantly increases household comfort.When choosing a specific model, it is necessary to focus on its size and configuration of your own bathroom.

Production material

Holders for curtains in the bathroom can be made of different materials:

• for the rod, released from the polished "stainless steel", strength, safety and an increased period of use are characteristic. This item is quite expensive, but the duration of the application fully pays for the money spent in a short time;
• aluminum holders entice consumers with their lighter weight, and they are also easier to mount. But aluminum metal is softer than stainless steel, so rods made of it deform faster, which reduces their use time;
• plastic shower rails have earned popularity also because of the budget spending on them. At the same time, along the cornices, which are distinguished by lightness and strength, rings move without unnecessary noise, with the help of which the curtains are held.

Configurations and methods of fastening such structures are diverse. The outlines of the rod are straight and angular, semicircular and round, as well as repeating the edging of the bath.

Shower curtain rods, straight and angular, are leaders among popular products of this kind. The remaining models are less common in the bathrooms of apartment (house) owners. Straight type rods are classified as standard products. They are mounted between the polar wall surfaces of the bathroom or used as devices for a shower located in a recess. Corner cornices are endowed with the outlines of the letter "G" or are made according to the type of arc. Their place of installation is asymmetric or corner baths.

In tandem, consumers select curtains for such rods, made of both hard and soft material (the latter lends itself well to drapery).

corner cornice

Straight cornice

round cornice

Mounting

Turn off the water before installing the faucet.

Installation of the mixer can be done by hand.

The installation instructions for modern wall models are quite simple and do not require special skills from you:

1. At a height of about 15 - 20 cm from the edge of the bathroom, or at a height of 120 cm from the floor in the case of a shower cabin, water outlets are removed. Eccentrics are screwed into them, the thread is sealed with flax or FUM tape;

Eccentrics are screwed into water sockets.

1. The edges of the eccentrics are set so that they are on the same horizontal line, and the distance between the centers of their holes is approximately 15 cm;

The eccentrics are set at the same level and the desired distance.

1. Assemble the mixer body and try on the exits of the eccentrics. If everything converges, then the union nuts with gaskets under them are screwed on, alternately turning one or the other. It is not necessary to seal the thread, nor should it be overtightened;

Try on and screw the body.

1. A bar is installed on the wall using dowels and anchors, a flexible hose is connected with a union nut to the corresponding hole on the body;

Installed rod.

1. If there is a rigid stand, then it is screwed to the mixer, and also attached to the wall with dowels. Mounting configuration and height varies by model;

Scheme of rack mounting.

1. After that, water is supplied and the operation of the system is checked. If no leaks are observed, then the work was completed successfully.

At the end of the work, a test is carried out.

Self-installation of shower panels

Attaching to the wall and connecting the shower column to the water supply is easy. Even a non-professional can install a faucet stand in about an hour. Eccentrics must be attached to the water pipes, and the mixer itself is already put on them. After that, the installation of the rack itself begins. If a model without a mixer was purchased, then this step will be the first.

On the wall, you need to mark the place for mounting under the rack. If you buy one shower column, which consists of a rod, then the installation location will depend on the length of the flexible hose. It is necessary to check whether the hose will reach the mixer from any position. When the place is determined, you need to drill a hole in the wall.

Some models are equipped with fasteners, the distance between which varies. Therefore, you need to make sure that the prepared holes match the fasteners. At the end, fix the shower panel on the fasteners with small screws. It remains only to connect and check the shower.

Shower panels are great for small and spacious rooms as an interesting decor item. A variety of types, the presence of functions, a stylish look are the reasons for the high demand for them.

Criteria for choosing shower faucets

It just so happened that the faucets come with a shower. This is very convenient, since you don’t have to think about purchasing a device.

But if the assembly will be carried out on its own or it becomes necessary to replace the mixer, then you need to pay attention to the following:

1. Installation method. This is a very important factor that directly affects the usability of the shower. In this case, the taste of a particular person is more important.The main thing is that the selected model should match in its design with the installation elements of the rest of the system.
2. Model. Here the main role is played by the preferences of the buyer and the thickness of his wallet.
3. Functionality. Shower cabins, which are sold in our time, have a huge list of different functions. There is a tropical shower, and a cascade, and a Charcot shower, and a massage. The problem is that not the cheapest equipment that needs to be additionally installed is responsible for each function. As for the mixer, the changes in it are reflected only by an additional outlet.
4. Quality, material, manufacturer. All of these parameters are strangely intertwined. By purchasing a product from a well-known brand, we simultaneously receive a quality product from good material.

Summing up

After analyzing the data provided, we can draw certain conclusions about which faucet to choose for a bathroom with a shower.

For middle-class consumers, the most optimal in terms of quality and price category is a single-lever mixer. The shower-spout switching mechanism is built-in cartridge.

Devices with a crane-box principle of operation, using an eccentric as a switch, are not only obsolete, but also have a short service life.

Thermostats are the future. As soon as the price of programmable faucets drops, their sales will skyrocket.