DIY crafts from propylene pipes: homemade options for the home

The process of building a chair

Creating an original chair from plastic pipes is quite within the power of any home craftsman or craftswoman.To work, you will need a minimum set of tools, which is sure to be found in every home and, of course, the remains of polypropylene pipes.

Step 1 - project of the future chair

At the first stage, it is necessary to decide on the purpose of the chair and its design. If you decide to make a bright chair for a child, you should definitely take into account the height of the small owner.

If you plan to use the stool in the kitchen or in the country, in order not to miscalculate with the size, be sure to measure the height of the existing furniture.

For those who first decided to try their hand at this creative and creative work, it may be worth starting with the manufacture of the simplest design - a stool. It does not require a lot of skills and materials, and having coped with this task, you can begin to manufacture more complex structures.

For those who are already a little familiar with the technology of working with plastic pipes, you can try to make a folding chair. When assembling such a homemade product, you need to take into account the weight of the owner so that the structure does not break during use.

In addition, folding chairs are used on various uneven surfaces (loose ground, sandy shore, slopes), so the design must be stable.

Having decided on the homemade option, you can proceed to the next step.

Step 2 - preparing tools and materials

Depending on what type of chair it was decided to assemble, the set of tools and materials may vary somewhat.

But, in general, for work you will need:

• PVC pipes with a diameter of 25 to 32 mm - needed to create a structure frame;
• connecting fittings - for connecting plastic parts to each other;
• soldering iron for plastic pipes - if it is not there, you can use a lighter;
• a piece of thick plywood or thick fabric - depending on what type of chair was chosen;
• screws or self-tapping screws - to secure the seat (in the case of creating a stool);
• tape measure and pencil - to perform the necessary measurements;
• pipe scissors - this tool can replace a hacksaw or a regular knife.

In addition to this set of tools and materials, you may need threads for stitching the fabric (it is better to take reinforced ones, since there are increased loads on the chair). The fabric is also better to choose dense.

If in the case of creating children's chairs you can use ordinary coarse calico, then for folding stools for adults it is better to choose a more durable fabric - such as raincoat fabric or tarpaulin.

Step 3 - product assembly

Having prepared all the necessary materials, making a drawing and all the necessary measurements, you can start cutting pipes and assembling the structure.

To make it more clear, we will consider the process of making polypropylene chairs with our own hands using the example of the three most common designs.

Option number 1 - kitchen stool

It will not be difficult to build a kitchen stool even for those who have never held a soldering iron for pipes in their hands.

To build this homemade product, you will need the following set of materials:

• polypropylene pipes with a diameter of 25 mm or more - the length will depend on the height of the product;
• connecting fittings: cross - 2 pcs, tees - 8 pcs, plugs - 8 pcs; the latter is better to take without thread;
• a piece of plywood or a board that fits the size of the chair seat;
• self-tapping screws for fixing the seat;
• varnish or paint of a suitable shade.

Having prepared all the necessary materials and armed with a set of tools, you can start making a kitchen stool.

1. The basis of the chair is a cross. To make it, you need to connect a cross, 4 pieces of pipe and 4 tees. The length of the pipe must be taken with a margin, taking into account the distance for soldering parts. In size, the cross should be slightly smaller than the size of the seat
2. The next step is to make the frame of the stool. To do this, using polypropylene pipes of the required length, we connect both crosses together. The presence of plugs allows you to adjust the height of the product if there were inaccuracies in the calculations
3. The stool seat can be made from a piece of plywood or board, after sanding them. Having decided on the size, with the help of a jigsaw, the seat of the desired shape is cut out, and then it is polished around the perimeter. For fastening to the frame, 4 holes are drilled for self-tapping screws, so that they coincide with the frame
4. At the last stage, we fasten the seat to the frame with self-tapping screws and check the stability of the chair. If desired, the product can be varnished or painted in a color suitable for the interior.

As a rule, the standard size of a chair seat is 35 * 35 or 30 * 30 cm. It is better to use a jigsaw for sawing, but if it is not on the farm, an ordinary hacksaw will do.

Crafts from plastic pipes for the playground

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developmental rug, an arena, a swing, a sled, a football goal, a playhouse, an outdoor shower and a theater screen.

A very useful design for kids is a playpen made of PVC pipes.

Kids will love the lightweight swing that dries instantly after a warm summer rain.

In winter walks, homemade sleds will be the most reliable and fastest.The design is quite complicated, but with the help of practical videos you can figure it out.

For active games in the yard, safe football goals can be made from the remnants of plastic pipes.

Many children often dream of their castle in miniature. Making your childhood dreams come true is quite simple and not at all expensive. The frame is done very quickly. It remains to pick up a beautiful dense material for the roof and walls, and the house is ready!

The following structure will help to freshen up on a hot summer day. Such an open shower will be a joy not only for children, but also for adults.

From polypropylene pipes you can make a theatrical screen. It is enough to collect 3 frames, connect them together and close them with beautifully designed curtains. The home theater develops the creative abilities of children and creates good conditions for an exciting pastime.

Photo crafts from PVC pipes

We also recommend viewing:

• Making a diaper cake with your own hands
• Crafts from egg trays with your own hands
• DIY crafts from birch bark
• What can be done from the constructor
• Crafts from baby food jars
• DIY matryoshka for kindergarten
• Beautiful colored paper applications
• Crafts from pumpkin and sunflower seeds
• What can be done with PVA glue
• DIY mushroom crafts
• Walnut Shell Crafts
• DIY paper angels
• The best DIY foam crafts
• Balloon figurines
• How to make a paper frog
• Simple DIY straw crafts
• Do-it-yourself volumetric paper application
• Interesting DIY wood crafts
• DIY crafts from old things
• Interesting ideas for applications from circles
• Interesting plasticine crafts for children
• The best DIY wine cork crafts
• Beautiful fabric appliqué
• Application from colored paper Cockerel
• Toilet paper roll crafts
• Application of geometric shapes for children
• Overview of hot glue craft ideas
• Do-it-yourself original crafts from wood cuts
• Funny felt toys
• Educational soft books made of felt
• Beautiful DIY crafts from socks
• Original crafts for the cement garden
• Crafts from light bulbs with your own hands
• DIY crafts from coffee beans
• We sew a phone case from felt
• What can be done from dried roses
• What can be done from old tires
• DIY original valentines
• Amazing towel figurines
• DIY felt crafts
• How to make DIY rattle toys
• DIY felt animals
• DIY felt letters
• Craft paper bunny do it yourself
• DIY crafts from scraps of fabric
• Original crafts from tin cans
• Ideas for using old fur
• Epoxy resin jewelry
• Original do-it-yourself pumpkin crafts
• DIY wallet for paper money and coins
• Charming flowers from felt do it yourself

Please repost

Cool homemade plastic pipes

Plastic pipes are widely used in the modern economy: plumbing, sewerage, heating, etc. If you are a fan of collecting scraps, then it's time to find a useful use for them. Let's talk about how to make the necessary things from plastic pipes and their scraps of different diameters.

• Case for a hacksaw from a polypropylene pipe with a diameter of 20 mm. Measure the desired length.Mark the cutting line and cut the hole a few millimeters short of the edges. Now cut to the exact size and drill a 5mm diameter hole on the end of the case. Insert a bolt with a lamb into it. It will tightly clamp the pipe and the protective cover will not fly off from an accidental impact.

• Device for processing figured concave surfaces from a polypropylene pipe with a diameter of 20 mm and sandpaper. Cut the last to the size of the pipe. Protect the spatula with household tape. Lightly dampen the sandpaper and apply polyurethane glue to it. Spread it with a spatula evenly over the entire surface. Sand the pipe first. Glue sandpaper to it and fix it with molar tape. Leave for two hours for the glue to dry completely.
• Device for processing curly convex surfaces of PVC pipes for sewerage with a diameter of 32 mm. Cut it in half on both sides under the ruler, not reaching the edges. Get two semicircular blanks. Glue sandpaper inside each and leave the glue to dry completely.

• Case for chisel. Heat up the PVC pipe. Flatten one end. Insert a chisel into the resulting case. For convenience, write the size of the tool directly on the case.

• Adapter for blowing a jigsaw. Its inlet is small, and the pipe is thick. Heat the pipe and narrow it to the desired size. Insert into a jigsaw and leave to cool there. If it turns out too narrow, then wrap the pipe with several layers of molar tape. In this way, any conductors can be formed, increasing or decreasing the diameter of the pipe, as well as giving the desired shape.
• Clips for paper from a sewer pipe with a diameter of 50 mm. Cut into pieces and cut them across. Treat with sandpaper.
• Quick-acting clamp made of a polypropylene coupling with a diameter of 60 mm. Cut the pipe into two equal halves. Make cross cuts. Mark the places for attaching the handles. Drill with an 8 mm drill. Cut two rods with a diameter of 8 mm and a length of 20 cm. Insert the studs into the clamp, fix with nuts. Bend the rods a little, wrap with molar tape and put on heat shrink.

• Organizer for scarves and underwear. Cut the PVC pipes to match the height of the chest of drawers. Glue together and place in a box. Now every thing will be in its place.
• Shoe shelf. Cut pipes of suitable diameter into cylinders. Paste with a film that matches the main color in the interior. Connect with each other. Install in the hallway.
• Frame for a picture or a mirror. Cut the PVC pipe into small rings. Connect them together in the form of a flower, heart, square. Frame a mirror or picture with a finished ward.

For students and creative people:

• Organizer. Cut pipes of different diameters into cylinders of different heights. Connect together, fix on a stand made of plastic or wood.

• Pencil. Cut off a piece of plastic pipe. Paste the resulting cylinder with self-adhesive paper or colored tape. Glue a wooden or plastic base.

• Shelf for books. Fasten medium-sized plastic pipes at a distance of 5-7 cm from the wall. It will turn out something like a serpentine in the bathroom. Arrange books on this design.

Learn more about the arena. For work you will need:

• elbow with a slope of 90 degrees, diameter 20 mm,
• tee (each outlet with a diameter of 20 mm),
• coupling with a diameter of 20 mm,
• unreinforced hot water pipe with a diameter of 20 mm, length 2 m.

1. Cut the pipes to the desired height.
2. Connect the parts together. Use an iron for welding. First, the bottom of the arena. Then weld the vertical pipes. They have triplets. Connect the tees with short pieces of pipe.
3. Connect the two parts of the arena with plastic ties-clamps. Fasten the front parts with Velcro cable organizer.

Crafts from polypropylene pipes for giving

Idea 1. Crafts from PVC pipes in the form of a country chair

The most important thing to consider when designing country furniture: the more polypropylene pipes will be included in the design of a chair or garden lounger, the more weight it will be able to withstand. If you need a high chair for a child, a minimum number of PVC pipes is enough, and the seat for the chair can be made of dense fabric. Do-it-yourself summer chaise longue for an adult is best made entirely of plastic.

Idea 2. Flower vertical landscaping of a garden from propylene pipes

If you have unsightly, ugly walls in a suburban area, whether it be a bathhouse or a barn, they can be decorated with vertical gardening made of polyethylene sewer pipes. Polypropylene pipes with holes, plugs covering their side parts, and metal fasteners - this is all that is needed to make a suspended country flower bed. Here it is good to grow the same flowers that can be planted on the balcony in boxes - petunias, violas, pelargoniums, marigolds.

Idea 3. Side for a crib

The idea is not entirely summer cottage, but those who have small children will appreciate it. To prevent the child from falling out of bed at night, make crafts from PVC pipes with your own hands in the form of a side for a crib.

Idea 4.Crafts from pipes in the form of a stand for wine glasses

Great idea for a country bar. A cut is made in the polypropylene pipe along the width of the stem of the glass, the holder legs are screwed on top, for which the structure is attached to the ceiling.

From PVC pipes in the country, you can make a cool stand for forks, knives and spoons. Stylish and tasteful, right?

Idea 6. Vertical beds made of PVC pipes for summer cottages

A fabulous place for friendly gatherings and at the same time vertical beds can be made from plastic pipes. Such an original gazebo will surely become a favorite place for summer vacation. It is done simply:

• Dig in pipes for the base of the gazebo.
• Strengthen the roof in the form of slopes, make several transverse shelves on which you plant climbing plants, for example, bunch cucumbers.

When they grow up, it will be pleasant to be in the gazebo even on a sunny day. To make the gazebo look more picturesque, use brown polypropylene pipes.

Idea 7. Do-it-yourself garden swing for children

Plastic pipes, in which the ropes holding the swing are threaded, will become convenient handrails. The scheme for manufacturing such a country swing is quite simple. Eight pieces of pipe with holes, a rope and a board - that's all you need.

Idea 8. DIY crafts from polypropylene pipes for a dog

Here is an interesting step by step tutorial on how to make a yard shower for dogs. Today I will give my husband this idea for Rex!

The author of this device for a long time had difficulty in bathing his dog. When the water was turned off for a short time, the dog ran away, and the hose scared her to death, so she had to somehow get out, and this took a lot of time and effort.Not everyone dares to bathe a dog in their own bath. But to create such a shower from simple plastic pipes, even clumsy can do it.

For this original do-it-yourself plastic pipe craft, you will need:

• 12 m polypropylene pipe of suitable section
• 8 elbow tees
• 3 x 90° tees
• swivel adapter from pipe to hose
• flexible hose for water supply
• metal hose clamp
• hacksaw for metal
• screwdriver
• construction tape measure
• drill with a drill for making holes in the pipe

How to make crafts from propylene pipes

Start by preparing the details. Mark the polypropylene pipe into such segments: 79 cm - 8 parts, 101.5 cm - 3 parts and one part 100 cm, 93 cm, 6 cm and 4.5 cm. Cut the parts with a hacksaw.

Measure the desired length of the flexible hose for supplying water to the shower and prepare a segment of the required size. Then proceed to the pre-assembly of the structure.

Assemble the side frames from 79 cm lengths using angled tees. Also connect them together with long pipe sections of 101.5 cm.

The fourth segment is divided into two parts: 93 and 6 cm. Between them there will be a tie-in for supplying a flexible hose.

Use a drilling machine to drill holes. Select the correct drill size. If the water pressure in the plumbing system is low, it is better to use a smaller drill.

Before using the shower, test it. Turn on the water supply and check all connections for tightness.

Particular attention should be paid to the metal adapter from the pipe to the hose. Leakage is possible here if silicone sealant was not used when connecting the parts.

Alcove

If there are long enough and thin pipes, then you don’t even have to fix anything. It will take only 4 pipe mounts to be driven into the ground to ensure the stability and strength of the structure.

And you will also need a dense awning fabric. It will serve as a roof. In fact, the construction will be completed on this

Please note that the distance between the fasteners is selected individually.

But at the same time, it should be sufficient that such garden furniture as a table and several chairs could be placed in the gazebo in height and width. If desired, you can create walls by making some adjustments to the design. It will be somewhat more difficult, take more time and effort.

Shoe rack

For this do-it-yourself propylene pipe craft, you will need large diameter pipes. Depending on the planned number of compartments, a different number of pipes may be needed. The very structure of the shelf can be absolutely anything. The creation process will be the same for any of its variations.

Initially, it is necessary to measure the required length so that the shoes fit freely there. Next, cut the pipes into these segments, process with sandpaper, in order to avoid injuries and damage to shoes in the future.

After that, all pipe sections are glued to each other in such a way as to form a multi-level shelf. The shelf itself can be in the form of a square, rectangle, triangle, any other shape.

If the shelf is too high, care must be taken to secure it to the wall against which it leans. This will give the product greater stability and strength.

Crafts from plastic pipes for the playground

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developmental rug, an arena, a swing, a sled, a football goal, a playhouse, an outdoor shower and a theater screen.

A very useful design for kids is a playpen made of PVC pipes.

Kids will love the lightweight swing that dries instantly after a warm summer rain.

In winter walks, homemade sleds will be the most reliable and fastest. The design is quite complicated, but with the help of practical videos you can figure it out.

For active games in the yard, safe football goals can be made from the remnants of plastic pipes.

Many children often dream of their castle in miniature. Making your childhood dreams come true is quite simple and not at all expensive. The frame is done very quickly. It remains to pick up a beautiful dense material for the roof and walls, and the house is ready!

The following structure will help to freshen up on a hot summer day. Such an open shower will be a joy not only for children, but also for adults.

From polypropylene pipes you can make a theatrical screen. It is enough to collect 3 frames, connect them together and close them with beautifully designed curtains. The home theater develops the creative abilities of children and creates good conditions for an exciting pastime.

How can you use the remains of polypropylene pipe materials in the garden

A greenhouse made of PP pipe materials will be a good replacement for the old wooden or metal version. After all, the metal is covered with rust, and the wood begins to rot in a short time.

A greenhouse made of polypropylene materials will allow you not to think about painting and repairing the structure for a long time, you will need to change the plastic film once a season.

For such a structure, you will need the following materials:

• Polypropylene pipes, their dimensions are selected in accordance with the desired dimensions of the structure.
• Sand and cement.
• Polyethylene film.

The building is easy to install. The blanks are concreted on one side. Then they are bent and concreted on the other side. To increase rigidity, each arc is connected to the other with a longitudinally laid workpiece using clamps. At the end, the structure is covered with plastic wrap.

Also, this structure can be fixed with polypropylene tees.

Video: we make a greenhouse on our own

Pallet sofa

A sofa made from shipping pallets will easily fit into both the garden space and the home interior. Sometimes specimens are so pleasing that they “ask” for an urban setting. Making the product is not difficult.

You do not need to have carpentry skills to do this. It's simple:

• take ready-made pallets;
• pallets are polished, connected with a corner;
• the frame is covered with an old mattress in a bright cover or a pile of pillows specially sewn for this purpose.

Similarly, it will turn out to build a couch or garden lounger. If you understand the intricacies of the process in more detail, you will get a magnificent swing.

Original and functional little things for decorating the interior

Our review of interesting ideas is opened by the simplest products from a plastic pipe, which even novice masters of homemade art can make.In addition, such crafts require a minimum amount of material, and in some cases even the shortest trimmings can be used.

From scraps of pipes of large and medium diameter, you can make convenient and practical organizer for office or workshop.

There are two options available here:

• fastening with screws to a wall or table, for which one end of the segment is cut off at an angle - a stationary option;
• gluing the segments together to form a stable figure is a portable option.

The segments can be left white or gray, or you can paint it in your favorite color. Such an organizer is indispensable for schoolchildren and people involved in creativity and needlework. With him, everything will always be at hand, and on the table - the perfect order.

Additional comfort on the desktop will be provided by a drawing tablet and a laptop stand, which can be made from small-diameter polypropylene pipes.

Bookshelves are a special element of the interior. Their presence in a certain way characterizes the landlord. High-tech style corner shelf will not go unnoticed.

From numerous short cuts of different diameters, you can make a patterned frame for a mirror or photograph. It is enough to glue the cut rings according to a pre-prepared layout, which can be applied to a sheet of cardboard. It can be floral patterns or something abstract. The dimensions of the frame will depend on the amount of suitable material.

Scraps of large diameter can be used to create a comfortable shoe shelf with numerous compartments-cells. This design will not take up much space in the corridor and will ensure proper storage of shoes and a quick search for the right pair.The elements are connected using glue or self-tapping screws. To fix the shelf on the wall, you can use a plywood sheet, to which the assembled shelf is first glued.

Some crafts made from PVC pipes will really appeal to lovers of fresh flowers. A reliable flower stand is simple in execution and looks pretty.

For the manufacture of flower pots for transplanting or breeding pets, small pieces of sewer pipes are well suited. Having shown imagination, such pots can be decorated with colored paper, paint or bright stickers.

It is easy to make a stylish vase for artificial flowers and dried flowers from elongated cylinders of medium diameter. If you approach the implementation of this idea creatively, then an original gift for a significant event can come out.

Another extraordinary idea for the interior is homemade techno-style lamps. There are a lot of execution options, but they all adhere to the principle of minimalism: no unnecessary details.

With the help of unused scraps, you can also make useful things in the hallway or corridor: a hanger for clothes and bags and a holder for garbage bags.

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developmental rug, an arena, a swing, a sled, a football goal, a playhouse, an outdoor shower and a theater screen.

A very useful design for kids is a playpen made of PVC pipes.

Kids will love the lightweight swing that dries instantly after a warm summer rain.

In winter walks, homemade sleds will be the most reliable and fastest. The design is quite complicated, but with the help of practical videos you can figure it out.

For active games in the yard, safe football goals can be made from the remnants of plastic pipes.

Many children often dream of their castle in miniature. Making your childhood dreams come true is quite simple and not at all expensive. The frame is done very quickly. It remains to pick up a beautiful dense material for the roof and walls, and the house is ready!

The following structure will help to freshen up on a hot summer day. Such an open shower will be a joy not only for children, but also for adults.

From polypropylene pipes you can make a theatrical screen. It is enough to collect 3 frames, connect them together and close them with beautifully designed curtains. The home theater develops the creative abilities of children and creates good conditions for an exciting pastime.