Why the toilet cistern is sweating: causes of fogging and how to eliminate them

An increase in the temperature of the water entering the tank as a reason why condensation could form

In the case when all the necessary actions to combat condensate have been carried out, and the presence of moisture on it continues to accumulate, it is worth thinking about forced ventilation of the room. Ventilation problems can be solved in the following ways:

Forced ventilation, one of the effective methods, which is suitable even when moisture collects not only on the tank itself, but also on all surfaces of the bathroom. Such a solution to the problem consists in acquiring a special fan, which is installed in the circulation hole. To supplement air circulation, you can install a grate on interior doors. So moist air will quickly mix with the rest.It is better to entrust installation work to professionals who will correctly calculate the required (specifically for this room) ventilation level

Before starting work, you need to make sure that the ventilation ducts are clean and have good draft.
Often there are situations when the previous tenants of the apartment close the ventilation hole with some material, and the new guests simply do not pay attention to it. To give the hole a more aesthetic appearance, it is enough to buy and install a special grate, which is sold in all hardware stores.
With a slight manifestation of condensate, you can simply leave the doors to the bathroom ajar, or in their lower part, make a strip of space so that they do not sit tightly in the door frame.
A dehumidifier also helps in the fight against condensate.

This is an electrical device in which a fan is mounted. Thanks to him, flows of moist air penetrate into the cooling chamber, where the liquid is separated and collected in a container, and the already dried air is returned to the room.

Perspiration on the tank can form both in winter and in summer. The main reason is the temperature difference. Cold water usually has a temperature of 3 to 6 ° C, and the ambient air temperature in the room can be several times higher. If we add here the conditions of high humidity of the room, then the walls will definitely be heavily covered with drops of moisture.

One of the reasons may be frequent flushing and complete emptying of the tank. In almost all modern toilet bowls, the thickness of the walls of the container is insufficient to exclude the influence of temperature differences. As a result, the surfaces cool down quickly.

Rooms with washing machines and places for drying clothes on bathroom. In combined bathrooms, the phenomenon occurs after taking a hot bath and active evaporation of water.

Insufficient toilet ventilation

Sometimes it is enough to install a ventilation device or an additional fresh air supply device to say goodbye to the problem forever.

How to check the ventilation system?

If your toilet cistern is sweating, you need to urgently check the integrity and serviceability of the ventilation system in the bathroom. Bring paper, a candle or a lighter to the ventilation grille.

The system works great if the paper sticks and the flame burns evenly. If paper falls or the flame goes out, then urgent measures must be taken to restore ventilation.

The process of diagnosing the operation of ventilation can be carried out independently by the owner of the apartment in a simple but effective way with the help of improvised means.

You can solve the problem of the constant appearance of condensate in the following ways:

• Cleaning of ventilation ducts.
• Installation of an additional fan on the exhaust duct.

An effective option for getting rid of exhaust air and obtaining clean air is to leave a gap 2 cm high.

An excellent solution is to install a multifunctional door valve that lets air in from the outside and at the same time blocks unpleasant odors, preventing them from spreading throughout the living quarters.

In any room with high humidity (toilet, kitchen, bathroom) there are ventilation windows that provide optimal air circulation in the room

A malfunctioning ventilation system can be the cause of the cistern sweating. But most owners of living space, trying to make the room look better, simply close the ventilation holes with trim. You don’t need to do this, it’s a good option to buy beautiful decorative grilles, which are intended for this.

Installing a fan in the bathroom

In order to stop the process of fogging of the tank, walls and floor in the bathroom, try installing forced ventilation in the room.

Sometimes a simple fan, which is mounted in the vent and activated when the light in the toilet is turned on, can eliminate the formation of condensation on surfaces. If this does not solve the problem, it is worth calling specialists to install more efficient ventilation systems.

You can improve the quality and circulation of air flows in the bathroom by installing additional modules in the room - fans and hoods

If the toilet cistern is sweating in the toilet, you should first check the operation of the ventilation. Some owners, in order to "cultivate" the bathroom, completely seal the existing ventilation holes.

Consumers should pay attention to the decorative grille, which will save you from problems with ventilation and will look aesthetically pleasing. One way to resolve the issue is to leave the door to the bathroom ajar.

The most effective way to combat condensation is to install a professional ventilation system that maintains an optimal level of humidity in the room.

Installation of forced ventilation is often used in combined bathrooms, which are characterized by the appearance of condensates on the toilet, tiles, ceilings, mirrors and other surfaces.In this case, it is better to install a professional ventilation system.

The power of the equipment must correspond to the operating conditions, then condensate droplets will no longer appear.

Installing an axial fan in the exhaust hole located in the bathroom is carried out in the following order:

Image gallery

Photo from

Step 1: Preparing the exhaust vent for fan installation

Step 2: Marking the fan mounting points on the wall

Step 3: Connect the fan wires to the wiring

Step 4: Attaching the outer axial fan panel

In order to verify whether the ventilation in the plumbing unit works perfectly, you need to re-verify: light a lighter (candle, match), bring it to the hole and look at the light.

If it goes out or is drawn into the ventilation duct, the ventilation system is functioning well. If the position of the flame remains the same or the deviation is small, another method must be considered.

If the toilet lid is broken

Such a minor breakdown, when the toilet lid broke, and, in general, there is nothing to solve. If the plastic is cracked, it's easier to buy a new seat. It's not a big expense. And the new seat looks much more aesthetic than sealed or, moreover, broken. If there is a malfunction in the mechanism, then first you should study this design, which is called a microlift. It is not difficult, but without it, repairs may not be carried out. A possible breakdown is that the rod popped out, to which the cover and the seat itself are attached. If this is not the reason, then it is better to replace the cover with a new one so that it does not work out, as in the designer - after collecting all the details - there are extra ones left.

Summing up

Now it is obvious that repairing the toilet bowl and the barrel, cracks in the toilet bowl and other troubles in the form of blockages and lack of water in the tank - we can decide on our own and it will cost us quite a budget, which is important today, and will not take much time. And the work done around the house with your own hands gives a special pleasure and fills you with a sense of accomplishment.

Summing up our educational program, we can isolate a couple of tips - treat carefully and with love the things that fill your life and ensure your comfort. Wash, clean, adjust and check periodically all the mechanisms and pipes and then you will save yourself from a lot of unpleasant moments and unnecessary expenses. As Professor Preobrazhensky said? The devastation begins with the toilet.... Let's avoid it.

Troubleshooting

First of all, you need to check how well the tank itself is functioning. The technology for performing such work is not particularly difficult. To do this, you need to observe a little how the mechanism performs its functional tasks.

When the toilet is not in use, but water still flows from the tank, even if it pours in a small trickle, the drain system needs to be repaired. Such a leak can be determined by the formation of a trace of water, which eventually appears inside.

To fix the problem, you will need to check every detail of the device, paying special attention to the connecting elements and inlet fittings.If it is not possible to cope with the task on your own, it is better to use the help of a specialist who can perform both diagnostics and troubleshooting. Calling a plumber is the ideal solution for users who do not have enough knowledge and practical experience to get rid of a breakdown in plumbing

Repair will fix the problem and solve the problem with the wet surface of the tank

Calling a plumber is the ideal solution for users who lack the knowledge and practical experience to get rid of a plumbing breakdown. Repair will fix the problem and solve the problem with the wet surface of the tank.

If the problem is too frequent use of the toilet, then installing a two-stage button on the mechanism can help. The latest models of plumbing devices are initially sold in this configuration. The button can be easily purchased at any building supermarket, the cost of production is quite affordable for most consumers.

Thanks to the installation of a button, it becomes possible to drain only a certain part of the water that is contained in the toilet tank. The button is a system that consists of two drain modes - full and partial. This feature makes it possible to save water, which is relevant today for most owners of apartments and houses, and also allows the incoming liquid to warm up over time. This will reduce the chance of moisture forming on the surface of the toilet bowl.

How to eliminate fogging?

In the main, the elimination of either high humidity in the room, or the elimination of temperature differences can help. You can remove condensate from the toilet bowl by one or more of the following actions.

Setting the drain mechanism

For starters, you can try to repair / adjust the drain system. The accumulation of water on the walls of the tank can be caused precisely by a malfunction of this unit. If the drain valve is not firmly seated, water can constantly go into the toilet. The tank in this case will be continuously filled and cooled. In such a situation, the volume of condensing liquid can reach 1-2 liters per day.

The fight against perspiration will be more effective if you start by repairing drain and shutoff valves. You should check the performance of all nodes and, if necessary, replace with a new one. To quickly deal with the repair, we advise you to see how the toilet is arranged.

Before installing a new mechanism, you need to check for lime deposits on the drain hole. If necessary, remove them and replace the rubber seals. To avoid deformation of the sealing gaskets, it is recommended to tighten the nuts not with keys, but with your hands, but with the maximum possible force.

Reducing the volume of drained water

Condensate at the drain tank, you can try to win by reducing the volume of the drain. Of course, with a large number of residents and continuous use of the bathroom, this will be difficult to achieve. However, the amount of drained water should be kept as low as possible. To do this, you can use the half-descent button. In the absence of such a system, it is recommended to replace the outdated device with a modern one. It will help to get rid of condensate and save a certain amount of water.

Elimination of temperature difference

Condensate formations can be combated by heating the accumulating water.If the supplied water is the same temperature as the air in the room, then drops will not accumulate on the surface of the tank. This can be done by connecting a system with instantaneous water heating, which has a thermostat, and creating proper thermal insulation of pipelines. The temperature can be set between 20-25°C.

On the other hand, you can lower the air temperature in the bathroom. But not everyone will like this plan of action.

Air dryer installation

The device must be selected in accordance with the level of humidity, area of ​​\u200b\u200bthe room and your budget. Based on the principle of action, 2 types can be distinguished:

1. Absorption - a container filled with an absorbent substance that perfectly absorbs moisture. Silica gel is often used.
2. Condensation - cools the air, and excess moisture condenses and settles inside the device.

Creation of high-quality ventilation

Protecting the tank from condensation must begin with good ventilation. Not infrequently, during repairs in a private house / apartment, the ventilation openings are closed or they simply do not undergo maintenance. However, this is a significant error, since it is she who is able to completely eliminate problems with fogging of the toilet bowl.

Checking the operation of ventilation can be carried out very simply: just bring a sheet of paper to the hole or bring a lit match and put it out. If sufficient draft is observed, the hood is functioning normally. If there is no draft at all or it is weak, then the ventilation ducts should be cleaned.

One of the easiest ways to solve the problem is to install forced ventilation.

Installation of a special tank

Modern technologies have long begun to solve the problem under consideration. One of them is a toilet with a double tank. The modification looks like this - a plastic tank inside, and outside - a familiar ceramic casing. A gap is created between the ceramic and plastic containers, which ensures that the water temperature is maintained at the same values ​​as room temperature. Installation of such a system can unequivocally solve all issues with the deposition of condensate.

However, such double tanks have one significant drawback - a high price.

Internal thermal insulation

Buying an expensive cistern / toilet bowl is not always advisable. You can solve the problem yourself. For this, polyethylene foam is placed inside the tank. Due to such thermal insulation, it is possible to reduce the temperature difference several times and eliminate drops.

Naturally, the situation with the condensate on the tank needs to be corrected. Otherwise, the consequences may be unfortunate. If you approach the solution comprehensively, then the situation will definitely improve.