Why it is impossible to hide gas pipes: and what threatens for it?

How to hide a gas boiler in a closet?

Those who want to install the unit in the kitchen are interested in the question of whether it is possible to close the gas boiler with a cabinet.It is possible, if you comply with all safety requirements. It is advisable to install a gas boiler first, and then buy or order for it suitable kitchen furniture

When choosing hanging cabinets, you should pay attention to their depth, length and width. These parameters must exceed the dimensions of the device, taking into account the safety clearances

…

planning kitchen with closed gas boiler, you should think in advance about the device of the following points:

• placement height;
• wiring of pipes for heating, water supply, chimney, connection of electricity;
• the possibility of masking communications.

Note! The supply of communications to the unit and the valves must not be closed

Mounting Recommendations

The nuances of installation depend on what is installed first - a furniture set or a gas boiler. If cabinets are installed first, then the block in which it is planned to hide the boiler is left without a bottom and ceiling to ensure sufficient air circulation. Then a specialist is called who installs the unit inside the cabinet and brings the necessary communications to it.

If the gas apparatus has been standing for a long time and there is no desire to call the gas workers, you can install the cabinet with your own hands. Before starting the installation, the door, roof and bottom are removed, cuts are made for supplying pipes and hoses. To add rigidity to the walls, they can be fastened with metal corners.

Note! The bottom and ceiling of the cabinet must be removed to ensure good ventilation. If both the kitchen set and the gas boiler are already installed, you can disguise the device with a homemade chipboard cabinet

For its production, wooden bars (2.5 × 4 cm), chipboard plates and tools are needed.They measure the gas unit and draw a plan of the cabinet, taking into account the ventilation gaps: at the top and bottom - 5-6 cm, from the sides - 6-10 cm

If both the kitchen set and the gas boiler are already installed, you can disguise the device with a homemade chipboard cabinet. For its production, wooden bars (2.5 × 4 cm), chipboard plates and tools are needed. They measure the gas unit and draw a cabinet plan, taking into account the ventilation gaps: at the top and bottom - 5-6 cm, from the sides - 6-10 cm.

The door must be finished to match the style and color of the installed cabinet.

…

What can you do to avoid paying a fine?

If the illegal connection to the gas pipeline falls under the definition of "gas theft", the size of the punishment will be large. The consequences cannot be avoided. In order not to have to pay a large fine, as well as suffer from other types of punishments, it is necessary to legalize the tie-in into the pipeline.

Unauthorized connection of a private house

For this you should:

1. Visit a design bureau specializing in the gas industry to obtain a certificate of conformity for an illegal project.
2. Contact the RegionalGas staff. They will check the work that was carried out by the consumer and find out if the connection complies with fire safety requirements.
3. Make payment of state duty and penalties. How much to pay is determined after the check scheduled on the day the application is submitted.
4. If the requirements are met, the applicant will be issued a permit and the tie-in will be legalized.

In addition to the legal connection to the gas pipeline, the consumer must operate gas appliances in accordance with the requirements. According to current gas supply regulations, owners of gas equipment, such as stoves and water heaters, must perform regular maintenance.

If you do not comply with this obligation, evade signing the contract, do not let gas workers into the apartment, refuse to comply with the order to replace faulty appliances, you will have to pay a fine in within two thousand rubles.

Gas pipeline near a private building on a summer cottage

An additional punishment for the illegal connection of a private house or apartment and non-compliance with the rules will be to stop the gas supply for a while. The user undertakes to pay the fine and follow all instructions.

Methods and tricks for masking a gas pipe

Since it is unacceptable to change the position of the pipes on your own, it is worth trying to hide them using decorating techniques.

Painting

The standards regulate the coloring of the pipes of the external gas pipeline, they must be distinguished and therefore, according to the requirements, have a yellow color. But there are no such restrictions for pipes laid indoors.

Painting pipelines running along the wall is the most budgetary, easy to perform and practical. pipeline masking method, especially if you paint them in a color in harmony with the surrounding finish, or, conversely, stand out against the general background, creating a deliberate accent.

A universal way of painting is to cover the pipes with paint to match the walls. Especially good if walls are lined with wallpaper painting. In this case, there is no need to select the desired shade.

If the kitchen is filled with colorful eye-catching objects, it makes sense to decorate the pipes with a contrasting color palette.

The bright color of the pipes can be skillfully combined with the finishing of furniture facades, with floor tiles, textiles and others.

Often they cover pipelines with metallic, silver, black, because this is how most household appliances are designed, and besides this, this method is ideal for high-tech, loft, modern kitchens.

The last, most difficult, but attractive way is artistic painting. On the surface of communications, you can display a pattern or pattern that repeats the image on curtains, wallpaper, tiles. This is done using stencils, acrylic paints, or using the decoupage technique.

Pipes can be decorated with original elements that can give zest to the whole room. This option will successfully complement the kitchen in the style of country or Provence. Pipes look unusual, on which the finish repeats the texture of wood - birch or bamboo.

Before applying, it is advisable to prepare the surface of the pipes - sand, clean, apply a primer, then the compositions will lie better and last longer.

Railing camouflage

Imitation of railing is the most successful way to disguise prominent pipes. But if hooks for various kitchen utensils are usually hung on the rails, then the pipe should remain free.

Most often, the railings in the kitchen are made in bronze, copper, silver, and the pipe is painted in the same color, if it runs horizontally along the wall, then by placing the railing below the pipe, you can create the impression of a well-executed composition.

Pipe laying over furniture

Horizontal sections of the gas pipeline can be hidden above the furniture.

Another option is to place shelves for kitchen utensils under the pipe. Pots, plates, jugs will close the pipe and make it invisible if it is painted to match the walls.

Placement of pipelines inside furniture

When ordering a modern kitchen from a designer, you can foresee cabinets with cutouts for the gas line and equipment and doors for free access. In this way, it is easy to hide both the horizontal and vertical parts, and also to hide the counter inside.

At the same time, it is quite possible to fully use the furniture, using it for kitchen utensils. In old furniture, skilled owners themselves cut pipe holes.

5 successful and safe solutions

1. Hide the geyser and pipes in the closet

You can hide communications, a column and a counter behind furniture. To do this, you need a cabinet or pencil case without a back wall.

The gas pipes are neatly hidden in the top cabinet. This method will be safer if the top and bottom of the furniture is open to allow ventilation.

It is bad that part of the cabinet will be used for other purposes (not as a place to store kitchen utensils). But this method is simple and safe - there will always be free access to gas equipment.

2. Plasterboard box

Purchase only fire-resistant options - GKLO sheets. The box is constructed from a metal frame sheathed with drywall.

The drywall box with pipes must be removable and ventilated.

By the way, in addition to drywall, you can use other non-combustible materials.

A box built in accordance with all safety rules is an excellent universal way to hide pipes, a meter and other gas equipment units at the repair stage and maintain stylistic unity.

A false wall is often constructed from drywall. Gas pipes are not can be completely sewn into a blank wall.Such a structure will take some area, which is undesirable for small kitchens. But for communications stretched all over the wall, sometimes this can be the best solution. It is possible to make such a design according to all the rules.

How to make a false wall competently and without the claims of gas services, see the video:

Customize your kitchen cabinet by choosing the right materials.

4. Decorate the pipes

The construction of the box is troublesome: it requires skills, the availability of tools. Everything can be done easier and faster. This will make it look no worse.

1. Painting.

Paint the pipe to match the walls, furniture, or backsplash.

The paint to match the headset stands out against the background of the apron, but it looks neat and does not spoil the overall look.

Bright colors in the work area will always distract attention. So, in the photo below, bright yellow did a good job and disguised the gas pipeline

Contrasting, well-chosen color combinations in the interior will turn a disadvantage into a feature. Bright pipes against a dark blue background look stylish and unusual.

1. Decorative painting.

Are you good at drawing? Then you can disguise the gas pipeline, not hiding it at all, but accentuating it.

1. Decoration with handy items.

Twine, ribbons and other things can become a material for decoration.

In fact, the choice of such tools is limited only by safety rules and your imagination.

Depending on the style of the room, you can decorate communications and make them part of the overall design with any other items, you can use various techniques, for example, decoupage.

5. Part of the railing system

Chrome pipes in the working area of ​​the kitchen are an ideal opportunity to hide communications.

The gas pipe can be hidden among the roof rails.

Can do pipe design under the roof rails, painted with chrome paint.

Do they have the right to turn off the gas if there is no maintenance contract

Shutting off the gas due to non-conclusion of this service contract is legal. This is evidenced by the provisions of the Decree of the Government of the Russian Federation "On measures to ensure safety when using and maintenance of the house and in-house gas equipment”(together with the“ Rules for the use of gas in terms of safety ... ”), namely article 80. This is due to the fact that gas appliances become unusable, such as gas water heaters, hoses, and this can lead at least to a leak. Maintenance and replacements are handled by gas workers.

In fact, this Decree obliges gas consumers to conclude these contracts.

Theft of gas through illegal connection to gas networks leads to an increased risk of creating a fire hazard. Huge damage is experienced by gas suppliers themselves, as they actually supply the resource to “violators” for free, and other consumers due to supply problems due to illegal tie-ins. The procedure of official and legal gasification, although not free, however, she is safe for an individual person connecting the gas, and for other consumers living nearby.

Sew up the pipe - what does it threaten?

Some owners prefer to ignore all the rules and regulations and do what is most convenient: sew up the gas pipe with siding. We will discuss the opportunities and threats of this option below.

As a rule, this is done by those homeowners who have gas brought into the house from the back side, invisible from the street, and controllers from the gas service rarely come.However, do not forget about the danger of such a decision, because the rules are not written in order to issue fines, but to ensure the safety of your life and health.

Initially, additional investments are not required - the pipe will simply be under the casing. However, if the controllers see this, you will be disconnected from the gas supply until the situation is corrected, and you will have to pay not only for the installation of a gutter in the casing or the transfer of the pipe, but also a fine and reconnection.

Sewing the pipe tightly will take as much time as it takes to sheathe this wall with siding. If later you have to redo everything according to the standards, then time will be added to the installation time to disassemble the lining of the upper half of the wall.

Leaking gas can cause a fire or explosion. Imagine if such a torch appears under the siding, and even near the insulation

If such a situation arises at the direction of the controller, for the entire period of re-equipment, your house will be cut off from gas supply. In the case of a pipe transfer, it can be a month or more.

If you still decide on this option, take care, if not about following the rules, then at least about your own safety. To do this, do not lay the pipe tightly with insulation, leave at least a small cavity along its entire length.

Make several ventilation holes in the siding at the level of the pipe, and install a gas analyzer in one of the gaps between them - a sensor that can warn you in advance of a leak.

Technology and stages of operations

Works on moving gas supply pipelines do not take much time and labor resources.Dismantling and installation of one pipe fits into one hour of working time for a team of welders and fitters, consisting of two people. The transfer of a gas pipe in the kitchen by one worker is strictly prohibited.

Preparatory activities

apartment owners, private house on your own it is not recommended to change anything in your gas system, not even flexible hoses. The transfer, extension, cutting of pipes has the right to be carried out exclusively gas service representative with the appropriate permission. However, it will not be superfluous for persons using gas equipment to know some of the provisions and sequence of actions during gas pipe transfer operations.

Most often, a specific relocation team consists of two people. Both specialists are trained in all operations, have a certificate for working with gas equipment, professionally carry out welding, metal cutting. Masters start work at the facility within one calendar week after agreeing on the technical documentation for the movement of pipelines.

At the time of the brigade's visit, the points of dismantling, lengthening, and installation of additional gas equipment are already known. Gas water heaters, stoves, ovens, heating elements are subject to refinement. Masters are perfectly familiar with the rules for performing installation operations. According to the regulations, it is not recommended to cut off the valves that block the gas supply. They are essential components of the gas transmission system.

Preparatory measures before transferring the gas pipe

In addition, according to the rules for the use of gas as a fuel, when moving the points of the pipeline, as well as changing the gas valve, the specialist must carry out its installation so that the valve is located in a zone of direct access for the user. The valve installed under the worktop needs easy access through the cabinet door with the rear panel removed. Sometimes access is through a piece of table top that opens up.

Taking this opportunity, the owner of the apartment can install a gas control meter. You can also change all outdated kitchen equipment. These operations should be warned in advance by the team that carries out the transfer of the gas pipe to another place. When connecting ovens, stoves, columns, the owner of the apartment is obliged to buy in advance a bellows hose, matched to the size.

The invited workers buy metal pipelines on their own. The cost of pipelines is included in the total estimate of services, materials and appliances. The owner needs to clear the kitchen space of furniture and bulky items. So specialists will carry out the whole complex faster and better. installation on your gas pipeline. Things that are not subject to removal must be covered with non-combustible dense materials.

Pipeline disassembly

Most likely, when the movement is carried out, it will be necessary to cut out a segment of the old pipeline and build it on a new one, only in the opposite direction. In this case, the specialist, using special tools, cuts out unnecessary elements. Here a huge role is played by the qualification of the worker, who has access to the movement of gas pipes.

Electric welders, gas cutters, mechanics are trained in special courses, where they are certified by professional workers of gas equipment. After passing serious exams, they are issued a special document. Having dismantled the layer leading from the riser to the device, the master leaves a section of the pipeline.It has an LPG shut-off valve.

This section of the horizontal pipe must not be changed or removed under any circumstances! There can be only one situation - an accident with damage to the pipeline. If a complete replacement cannot be dispensed with, then it is allowed. Often in practice, residents of the upper floors of apartment buildings are asked to cut off a long section of the pipeline.

This element rises from the lowest point of the apartment to the highest point to a height of 1.8 m, then bends at an angle of 180 °. It is forbidden to shorten such a pipeline by installing a valve on the remaining piece. But there is a solution for this situation - it is necessary to digest the pipeline, and install the valve at a height of 75 cm from the floor under the tabletop.

Decorative options

Consider options for decorating communications and modeling the interior in the kitchen.

If the kitchenette is small, and there is no room for additional furniture, one thing remains - try to beat the gas pipeline by including it in the interior. There are several options:

Painting

Pipe painting - simple and beautiful

The cheapest and easiest way. Choose a tone that echoes the design of the room, this will make the design less noticeable. Or use painting - fantasy patterns and stylization will look equally interesting.

1. Mosaic and appliqué. With the help of volumetric decor, you will create a truly original composition.
2. Decoupage technique. If there is no desire to test your artistic talent, go the easy way - use ready-made images.

Hanging screens and boxes

Decoupage - an interesting solution in the decor of the pipeline

The design is simply installed on the wall, the problem of the integrity of the interior in this case is not at all - the box can be pasted over with wallpaper, painted, etc.

There is often debate about whether drywall boxes can be used to hide gas pipes. It is possible, if at least partial access to the gas pipeline communications is provided.

How and with what to cover the pipeline - now you have several answers to choose from

Use your imagination and remember to take precautions. Let your interior be stylish and safe

Methods can be combined

Methods and tricks for masking a gas pipe

When deciding how to hide gas pipes in the kitchen, you can not put the interior and design at the expense of safety issues. In the first place is the life and health of people. As for the possibility of masking the pipeline, there are various options for how to do this within the framework of the current rules and regulations. To hide the highway, you can use one of the methods.

Painting

Painting gas ducts is the simplest solution, since it does not require refurbishment of furniture and expensive welding work.

There are such options for finishing communications so that they look organically in the interior of the kitchen:

1. Plain color coating. In most cases, the choice is made in favor of white paint, which is combined with heating risers, windows and corners on their openings. You can choose the paint to match the color of the kitchen, apron or wallpaper.
2. Applying an ornament. This is done manually or through a stencil. The shade is chosen according to your taste.
3. Wood painting. It is advisable to use this option for decorating rooms in country style.The riser is painted to look like a birch trunk, and branches with leaves and catkins are drawn on the walls.

Railing camouflage

It often happens that after installing furniture, a horizontal pipe passes through the area of ​​\u200b\u200bthe kitchen apron. This problem can be solved by simulating the railing system.

To do this, you need to do the following;

1. Remove paint from metal. Polish with fine sandpaper and abrasive paste.
2. Coat the steel with several layers of chrome paint until an even and deep color is obtained.
3. Fix decorative elements (shelves, gratings, hooks) under the communication.

After filling with kitchen utensils, the design will look solid and organic. It will give the impression that all elements hang on stainless steel guide.

Pipe laying over furniture

Such a decision is made when replacing gas communications, when the furniture is already suspended, and it is not planned to change it in the near future. In this case, welders place the horizontal part of the run directly above the cabinets, and the vertical sections with the help of inserts are carried out close to the canisters.

A way to decorate a gas pipe, if it is in plain sight, is to install a plastic corner plinth. A gap is left between the cabinets and pipes for the free removal of furniture. When the highway rises above the shelves, a decorative box is superimposed on it to match the color of the walls or facade of the headset.

Placement of pipelines inside furniture

A popular and effective way to mask the line is to lay it inside hanging shelves, cabinets and canisters. The advantage of this solution is the possibility of unhindered access to the highway. To do this, just open the doors and take out the contents.An additional advantage is the ability to hide gas meter for kitchen in one of the cabinets.

In order to close communications and appliances, it is necessary to remove the back walls from the shelves, take measurements and make cuts. They should be done in such a way that a gap of at least 10 mm remains between the wood and the metal.

The use of drywall

To the question is it possible to close the gas pipe drywall, should be answered positively only if the kitchen box for the gas pipe is equipped with a removable or opening hinged wall. Blind design contradicts fire safety rules. The advantage of the solution is the ability to finish the kitchen gas pipe box in the kitchen with the material that covers the walls.

How to protect?

For this you can use organic or inorganic materials. The first group includes chipboard, textolite, foam plastic, reeds and others. They are resistant to moisture, but with prolonged heating they can be deformed.

Reference! Inorganic insulators are drywall, mineral wool, fiberglass and others. They withstand temperature changes well, are inexpensive, but unstable to moisture.

Protection with chipboard

Chipboard board is considered to be a good protection for the refrigerator from the heat that comes from the stove. It needs to be placed in space. between stove and fridge. For a more aesthetic appearance, the shield can be covered with a laminate or decorative film, and the cut points can be sealed with a special tape.

Tiled screens

Such a solution is considered very practical and effective. The tile screen between the stove and refrigerator is easy to clean.If you build a shield of the same color and texture with an apron finish above the stove, then it will successfully fit into the interior.

It is better to glue the tile on a surface made of chipboard or moisture-resistant drywall.

Barriers with foil or glass

Foil is also considered a heat-reflecting material, but it is thinner than the others, so it is better to stick it on a thicker partition. Due to its high strength, this protection option will last longer.

There are also special insulating materials that are sold in rolls. On the one hand, they have a self-adhesive surface, and on the other, a lavsan film. They are easy to stick to the refrigerator wall using double-sided tape, which can be removed if the insulation needs to be replaced.

Legislative requirements for the gas pipeline

There are a number of legal acts that gas workers can refer to in this matter. Among them: building codes and regulations 42-101-2003, 2.04.08-87, 31-02, 2.07.01-89, as well as the Safety Rules in the gas industry, Rules for the device and safe operation pressure vessels, Rules for the use of gas in the national economy and others.

According to these documents, gas pipelines are external and internal, those that are located inside buildings. The first are divided into above-ground (on supports or walls), above-ground (in embankments) and underground. In addition, gas pipelines differ in pressure, depending on the purpose and diameter.

Private consumers are connected by pipes with low pressure, up to 0.05 kgf / cm2, but the main pipe, from which pipes are diverted to each house, already refers, as a rule, to pipelines with medium pressure, up to 3 kgf / cm2

All work on all types of gas equipment, from laying the pipeline to connecting the stove in the house, must be carried out by qualified specialists, certified and authorized to carry out such work.

Only specialists know and will be able to comply with all standards, requirements for all SNiP, as well as the rules of the Ministry of Emergency Situations and electricity supply services.

Gas supply to the house underground allows you to get rid of pipes in the yard - it's beautiful, convenient and safe

In order to find out whether you have a gas pipe installed correctly now, whether the correct location will remain after sheathing with siding and where it can be moved, if necessary, we recommend that you familiarize yourself with the following requirements of the listed regulatory legal acts:

• gas is supplied to residential buildings in an open way - so that at any time it is possible to assess the condition of the pipe, its prevention, maintenance and repair;
• the gas pipeline can be fixed on support pillars or attached to the wall of the building. Perhaps, in order to solve the problem of decoration and extensions once and for all, it is worth taking it out on supports away from the building. The distance between such supports for each specific case is indicated in SNiP 2.04.12-86;
• the pipe laid along the outer wall must be located at a height of at least 2.2 m from the ground;
• at least 0.2 m must remain from the gas pipeline to the roof;
• it is forbidden to lay pipes closer than 0.5 m from windows and doors, and also to install detachable connections under windows and balconies;
• the valve that shuts off the gas supply must be located no closer than 50 cm from windows and doors horizontally;
• from the wall surface to the pipe, the gap must be at least 6 cm;
• the pipe is fixed to the wall on hook-brackets or clamps with a rubber electrically insulating gasket;
• it is forbidden to fix the pipe to fasteners by welding;
• it is forbidden to lay gas pipes of medium and high pressure along the wall - it is better to bring them underground, with access to the surface immediately before entering the house;
• in a section where there are no footpaths and roadways, the gas pipeline can be located at a height of 35 cm from the ground. However, in practice it is rarely lowered below 2 m, because the pipe must also go high along the wall, and the common distribution pipe is carried out on supports about 2 m high.

Pipes need to be painted only with yellow paint that is resistant to temperature extremes and moisture - for example, oil or alkyd enamel. Under the paint, 2 layers of primer should be applied, and the paint itself is also applied in 2 layers.

According to the norms, it is also necessary to mark with red arrows direction of gas flow, in practice, in low pressure gas pipelines do without it

Thus, according to the regulations, the answer to the question “is it possible to close gas pipes with siding?” will be negative.

Unauthorized replacement and transfer of the column

As we have already found out with you, various types of punishments are provided only for independent work with gas. Next, we will consider what threatens the consumer with unauthorized replacement or transfer of the column.

What threatens self-replacement of the column?

We found out that the consumer has the right to carry out the installation and dismantling of an unattached device on his own or involve third parties.

Clause 10 of Section II of Decree of the Government of the Russian Federation of May 14, 2019 N 410 establishes that the replacement of in-house or in-house equipment should be carried out by a specialized organization.

Independent manipulations with the replacement of gas equipment, in particular columns, will entail a number of consequences.

So, according to Art. 7.19 of the Code of Administrative Offenses, a fine in the amount of ten to fifteen thousand rubles will be assessed, civil servants are subject to sanctions in the amount of 30-90 thousand rubles, penalties from 100 to 200 thousand rubles are applied to business entities.

And Art. 38 of the Federal Law N 69-FZ “On Fire Safety” dated December 21, 1994 states that property owners may be held administratively or criminally liable for violation of fire safety.

It is forbidden to install a geyser in rooms where households stay for a long time, for example, rest or sleep

Breaking the rules use of gas at home in terms of independent replacement of gas devices, leads to liability under Article 165 of the Criminal Code of the Russian Federation.

For the property damage caused, punishment is provided in the form of a fine for unauthorized replacement of a gas column of up to eighty thousand rubles or the amount of the main income of a convicted person with imprisonment of up to 24 months. Other types of influence can also be applied - correctional labor for up to two years, with arrest up to 12 months.

Consequences of unauthorized column transfer

The process of dismantling and reinstalling the water heater is not complicated. But the unauthorized transfer of the gas column will be regarded as an offense.

The measure of responsibility and the amount of penalties depend on the assessment of the illegal action. Thus, the amount of sanctions for an administrative offense, according to Art. 7.19 of the Code of Administrative Offenses of the Russian Federation, is from ten to fifteen thousand rubles.

But paragraph “b” of part 3 of article 158 of the Criminal Code of the Russian Federation defines criminal liability for transferring a water heater if illegal actions led to damage to property or death of people (for example, if the column exploded and there are victims). In such case, the fine for transfer household geyser can be from one hundred to five hundred thousand rubles. This type of offense also provides for arrest for up to six years, or forced labor for up to five years.

For self-attaching the structure, you will need a drill with a set of drills, anchors, self-tapping screws, a laser level

Before starting work, the user should consider the following:

• unauthorized transfer can serve as a basis for shutting off the gas supply;
• installation of a water heater is prohibited on supporting structures;
• transfer is possible only if the distance from the original location does not exceed 1.5 meters;
• to install the device on another wall, you must submit an application to change the technical documentation.

It is also possible to legalize the already completed transfer of the geyser - just go to court or collect documents, a list of which is given in 26 article of the Housing Code RF.

Is it possible to carry the pipe yourself

Alas, advice on the Internet may not always be helpful. Other craftsmen recommend creating a closed drywall box, then decorate it in any convenient way.However, if such a design is noticed by the gas service, you will not only have to get rid of it, but also pay a fine. So when solving problems yourself, remember to follow the five main safety rules:

Communications must be easily accessible. This is necessary in order to quickly prevent gas leakage in the event of an accident. Sometimes non-compliance with this aspect costs the owner of the house and household members health or life.
Pipes must not be closed tightly. Otherwise, in the event of a leak, gas will accumulate in the duct, increasing the risk of an explosion. So any decorative design must have holes for ventilation.
It is forbidden to carry pipes on your own. Only specialists can cope with such work (after coordinating their actions with the special services). If the gas company refused to transfer pipes to you, then this can be dangerous.
Communication systems must be painted regularly. This is done in order to extend the life of the pipes by preventing corrosion.

Naturally, the shelter should be easily dismantled so that you can crawl up to the communications with a brush.
When working with pipes, you should be especially careful. Communication systems should not be damaged during decorative work

Also, it is forbidden to hang any building materials on them that have an additional load on the support.

Gas stove connection

Thus, it is forbidden to carry gas pipes on your own. But the law allows them to be hidden if the decorative design meets certain requirements. But what still threatens a person who has broken the rules and transferred the communication systems?

Consequences of unauthorized transfer

If by some miracle, without the necessary skills and knowledge, you were able to move the pipes to a new place on your own without leaking gas, then be prepared for the fact that your offense will be revealed by the gas service at the first inspection of the equipment. The consequences of an unauthorized transfer can be unpredictable, as they depend on the human factor. One employee may turn a blind eye to this or not notice the transfer at all due to their inexperience. The other one will draw up a protocol on the offense and report to the administration, which in the future will lead to a fine. However, even if the offense can be avoided, remember that by moving gas pipes to another place, you risk not only your life, but also the health of others.