How to get rid of mold in the washing machine with improvised means at home

How to remove the smell of mold?

Removing mold odor is a complex process. If the smell appears, you need to perform a few simple and accessible actions for everyone:

• inspect the drum of the washing machine for mold;
• check the drain hoses and filter for clogging, if necessary, clean and eliminate leaks at the connections.

First of all, experts recommend manual cleaning of the places where the fungus forms: in the folds of the sealing ring of the loading hatch, the detergent container, if necessary, rinse the drum.

The work is carried out with a soapy solution with the addition of dishwashing detergent. It is necessary to remove and rinse the drain hose with the same composition. In case of heavy contamination, the hose should be pre-soaked in clean water.

After the end of the manual cleaning of the mold of all elements, the washing machine is "run" without loading to the rinse function for washing.

For the final elimination of the smell of mold, it is necessary to load 2-3 tablespoons of washing powder into the container, add 100 ml of apple cider vinegar, 1/2 cup of citric acid. At the maximum temperature without loading laundry, this procedure must be carried out 2-3 times. In the middle of the cycle, it is recommended to pause for 2 hours and then continue. Applying citric acid and vinegar at the same time will also help descale the heating elements to reduce the smell of burnt rubber.

Causes of mold

Most often, mold appears due to a violation of the rules of operation or due to improper care of the equipment. The fungus quickly spreads along the rubber door seal, settles in the powder compartment, on the drain hose and filter.

Mold often appears on the rubber cuff in the hatch of the washing machine

Black mold can cover not only the washing machine, but also the walls or furniture in the room. The problem occurs due to several factors:

• high humidity;
• lack (low level) of ventilation;
• high air temperature.

A common place for the appearance of the fungus is the bathroom, which most often contains a washing machine. The microclimate in this room is unfavorable for equipment, so you need to carefully monitor the condition of the machine and timely prevent the appearance of mold.

Reasons for the appearance

Mold appears in the machine if:

• the hostess, for reasons of saving time and electricity, turns on a semi-automatic or automatic machine for quick washing and low temperatures;
• uses conditioners and powders in large quantities. In this case, their excess settles on the surfaces of the container and the drum;
• does not remove the laundry from the drum immediately after the completion of the washing process;
• rarely cleans parts from scale;
• does not wipe the cuff around the door and the container for powder and conditioner after washing from moisture;
• does not clean the filter from contaminants according to the schedule once every 2-3 months;
• does not completely drain the water from the washing machine due to improper arrangement of the dirty water drainage system.

Mold in the washing machine tray

All these points are a direct answer to the question of why mold appeared in the machine. But if you really had to face it, you need to immediately move on to an active struggle.

How to remove mold from a washing machine

Before starting the fight against mold, it is necessary to conduct a visual inspection of all machine components and find pockets of mold. Inspect the seal, powder compartment, hoses, drain filter. These areas must be well cleaned with a brush and available products, after which it is recommended to treat with a specialized composition to eliminate mold.

Next, we consider separately the substances with which you can remove mold from a household appliance.

Lemon acid

Citric acid is one of the most effective budget remedies against scale, limescale, and fungal microorganisms.

To clean a standard apparatus, you need to purchase a couple of bags of acid. Acid must be poured into the powder compartment, or directly into the drum and run the program at maximum temperature in order to disinfect.

Also, citric acid can be used in conjunction with the aggressive Domestos. This combination is appropriate for especially neglected cases. The sequence of actions is as follows:

1. First you need to put on gloves and close the windows in the bathroom, if any. The liquid is applied to the drum itself and the seal around it.
2. After that, the device is closed and left to "sour" for four hours.
3. Next, you need to select a rinse and start the device, after pouring three tablespoons of citric acid into it.
4. At the end of the rinse, start the washing program at 90˚C, adding 200 grams of acid.
5. After completion of work, the automatic machine is wiped and ventilated.

Interesting! Citric acid can also be used in combination with laundry detergent and a small amount of bleach to eliminate mold.

Soda

Baking soda is another budget-friendly way to get rid of mold in electrical appliances. To do this, dilute and mix soda with water until a slurry is obtained. Apply the resulting mixture to the areas of accumulation of mold fungus and leave for half an hour. Use a soft brush or sponge to rub the resulting substance over the surface, then rinse it with water.

Another version of the recipe:

1. 1 liter of table acetic acid is poured and 400 grams of soda is poured into the powder tray.
2. The empty machine starts at the highest temperature.

This method is very simple, however, not safe, because with significant wear of the components of the device and non-compliance with proportions, there is a high risk of breakage.

Vinegar

To eliminate the fungus from the surfaces of the product with vinegar, you will need 200 milliliters of acetic acid. It must be poured into the powder compartment and set to wash at 90˚C. This will eliminate dirt, mold and the resulting mustiness. At the end of the work, the machine must be wiped with a dry, clean cloth and run in the quick wash mode without the addition of auxiliary agents.

washing powder

To obtain a cleaning agent, the powder is mixed with water and citric acid. The resulting substance must be treated with moldy areas of the device. In this state, the device is left for a day, after which all nodes are wiped with a brush, and hard-to-reach areas are cleaned with a toothbrush. Next, the device should be run at the highest temperature.

Dishwashing liquid

Dishwashing gel can also be used in conjunction with citric acid to form a paste that is applied to areas where mold has accumulated for 10-20 minutes. Next, these areas should be rubbed with a brush and rinsed with water. If the first time the result does not appear, repeat this procedure.

Products containing chlorine

Chlorine is one of the most effective mold killers. It is best to use sanitary ware cleaners and bleaches for this purpose.Such solutions are abundantly applied to the affected areas, after which the device is left to “soak” for a certain time.

On a note! The minimum time interval is half an hour, but with excessive contamination, the product can be left on couple of hours. After cleaning, thoroughly rinse off the active substance and run the empty machine at the highest temperature.

The use of whiteness is widespread due to the significant content of chlorine. The use of whiteness provides a total cleaning of all elements and the tank of the device.

Reasons for the appearance of a fungus inside a household appliance and on an elastic band

The ideal habitat and reproduction for mold is high humidity and moderate above zero temperatures. Based on this, the first thing that can provoke the development of black spots on the walls and the rubber band of the refrigerator is not enough low cooling temperature and condensation on the internal surfaces of the household appliance.

Mold can also be caused by:

• violation of the shelf life of food (spoiled food is covered with a fungus, infects everything around it with spores);
• violation of the rules of operation (the household appliance is switched off for a long time with the door closed);
• laying in the refrigerator fresh food already infected with fungus and mold spores;
• irregular, poor-quality cleaning;
• leaky adjoining of the rubber door seal to the walls of the refrigerator (warm air, penetrating inside, provokes the appearance of condensate, which, combined with a positive temperature, is an ideal breeding ground for pathogenic microorganisms).

When the first signs of mold appear (an unpleasant characteristic musty smell), you should immediately begin to fix the problem.

Video

To learn more about how to clean the washing machine from mold, the video below will help.

About the author:

She graduated from the Institute of Tourism of the FPU with a degree in Manager, she loves to travel and communicate with people. Interested in psychology, enjoys dancing, studying English. For five years of maternity leave, she thoroughly mastered housekeeping, not forgetting about her own development. Skillfully wields a word, can support a conversation on any topic due to interest in different areas of life.

Found an error? Select it and press the buttons:

Ctrl+Enter

Interesting!

For washing small items on the road or in a hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside a tied bag along with water and a small amount of detergent. This method allows you to pre-soak things and perform washing without damaging the fabric and without spending a lot of powder and water.

Prevention

To prevent mold from appearing in the washing machine, a number of preventive actions should be taken:

1. After each wash, it is advisable to wipe the detergent tray, drum, seal and other rubber elements with a dry cloth.
2. The powder container must be pulled out and the machine door left open for ventilation.
3. Never leave washed laundry in the drum for a long time. High humidity promotes the growth of fungus.
4. Do not store dirty clothes in the drum of the machine. It is better to have a special container for collecting dirty things.Otherwise, microorganisms and an unpleasant odor will appear in the machine.
5. You need to add detergents in accordance with the instructions. Too much of them will not make the laundry cleaner, but will become a favorable environment for the spread of mold. After all, excess detergents are poorly washed out and create a sticky coating on the walls of the washing machine.
6. Once a month, preventive washing should be carried out at the maximum temperature. You can add bleach or citric acid to the main wash.

In order not to miss the appearance of mold, it is necessary to regularly inspect the sealing gum, powder tray and filters of the washing machine. If a fungus is found, you must immediately begin to remove it, otherwise the infection will get on the linen.

Cleaning products

As a means for cleaning a washing machine from a musty smell, mold and dirt, both folk and special detergents from the household department of the store are used. This process is easy and you can do it yourself. Consider popular cleansers.

blue vitriol

Copper sulfate can remove the mold itself for a long time, as well as get rid of the mold smell in the washing machine. It is small blue particles. This strongest poison is used in agriculture in the treatment of bacteria, so gloves must be used for protection. To prepare the solution, copper sulfate, washing powder and water are mixed. Apply it to areas of mold accumulation and hold it for several hours, then use a rinse cycle to remove residue.

Hydrogen peroxide

An easy and quick way to get rid of mold is replacing chlorine bleach to 3% hydrogen peroxide.As an antiseptic when used in medicine, it also combats several problems in the processing of equipment:

1. Kills fungus.
2. Removes limescale.
3. It has an antibacterial effect.
4. Destroys viruses.

Use with hot water will help remove traces of mold more thoroughly. At the same time, it is safe and does not harm health.

Lemon acid

Citric acid is a commonly used remedy for getting rid of mold. For use, use a couple of packs of acid, which are sold in any market. Place it in the detergent compartment or in the drum, start the washing cycle at a temperature above 90 degrees, preferably with a soaking program. It is recommended to apply this method every 4-5 months. Citric acid helps with musty smell from the car.

Bleach

You can clean the washing machine from mold using chlorine bleach. Apply it with warm or cold water, as in hot water it ceases to act. Limescale after bleach does not disappear and additional measures must be taken. Bleach may not get into the internal parts, so this method is good for light contamination. During cleaning, the product is left for several hours and an additional wash without powder is started at a high temperature to remove residual chlorine-containing substances.

Soda

You can clean the washing machine from mold, you can get rid of the smell inside with soda. Soda is diluted with water to a state of slurry and applied to the places of accumulation of mold, leaving this mixture for half an hour. Next, rub the product over the surface with a sponge, and start the rinsing mode. More effective cleaning will be when mixing the product with washing powder. Baking soda is good at getting rid of musty smells because of its ability to absorb bad odors.

Vinegar

Vinegar helps clean your washing machine, as does acetic acid. Only use a 9% solution of the agent. It is recommended to use a synthetic substance. Apple cider vinegar or wine vinegar may contain oils that will only leave additional marks on the surface of the equipment. After cleaning, the unit must be wiped dry and well ventilated.

Chemicals

You can use the following substances:

• toilet fluid;
• washing powder;
• dishwashing liquid.

Toilet fluid is excellent at killing fungus and various pathogens. Apply it to the inside of the machine, rubber surface, powder container. Leave for a few minutes, clean with a sponge. Wipe dry and run an express wash to remove excess substances.

External manifestations of black mold can be removed using the same washing powder and dishwashing detergent. This will not get rid of the fungus and it will start to appear again. Therefore, other methods must be applied. The method of using cleansing is the same as with any cleaning. It is necessary to thoroughly wash all components of the equipment, then thoroughly rinse, wipe and ventilate the machine. The powder and dish detergent is safe for the skin and can be used without gloves.

Special funds from hardware stores

Many people recommend cleaning the car with products from hardware stores. These products remove three problems at once: dirt, mold and scale.

They look in the form of sprays, solutions or special powders. They are used both externally and added to the detergent compartment during washing.Cleaning in this way is very effective, but requires additional costs. These products can be used for disinfection after washing very dirty clothes or for cleaning when washing children's clothes.

Why does mold and fungus appear

Mold in a washing machine is a fairly common phenomenon associated with improper operation of the device or with a neglect of the preventive measures recommended by the manufacturer.

Here are some of the most common causes of mold:

• Constant washing at a fairly low temperature (30-60˚C). In order to save energy, many housewives prefer to wash things at a low temperature. The fungus and its spores feel very comfortable in such conditions. And if the machine is not yet periodically cleaned of scale and dirt, then this becomes a direct path to the growth of a mold “fur coat” on all parts of the device.
• Insufficient use of chlorine bleaches. Some people are absolutely in vain afraid to use chlorine bleach when washing things in an automatic machine. Treatment with chlorine bleach is an excellent preventive measure for the appearance of fungus and mold on all parts of the appliance: from the detergent tray to the heater and tank.
• Refusal of funds designed to remove scale. Special anti-scale products in the washing machine remove not only hard mineral deposits, but also particles of dirt and mold from all parts of the machine.
• Abuse of gel-like detergents and rinses. Washing gels and conditioners have come into use relatively recently, but have already firmly won the sympathy of housewives. Washing clothes with them is fast, convenient, economical, comfortable.Washing machine manufacturers do not share the enthusiasm of consumers, and urge to alternate the use of gel products and regular loose powder.

Conditioners should be used in very moderate doses. The thing is that gel products and rinses are poorly washed out from the internal parts of the machine, which can lead to the appearance of fungus and even damage to the unit.

• Storing dirty laundry in the drum of the machine. A damp washer is an ideal breeding ground for bacteria and the tiny mold spores that are found in abundance on dirty clothes. Items intended for washing should be stored in a special basket!
• Permanently closed hatch door. The washing machine needs time for the moisture accumulated after washing to evaporate from the internal surfaces of the machine. A closed hatch door prevents normal air exchange, which can result in mold.
• Accumulated water in the rubber cuff. Often, after washing, water and small particles of debris accumulate in the rubber seal of the machine. If you do not wipe the elastic from moisture and dirt in a timely manner, in the future this will inevitably lead to the appearance of mold and the replacement of the cuff itself.

How to remove folk remedies?

The first thing you need to start fighting mold is a thorough inspection of all work surfaces to identify all mold pockets.

These surfaces include:

• drum door seal
• detergent tray,
• filter,
• water inlet and outlet hose.

In general, places that are constantly in contact with water. After processing and cleaning, these places should be re-examined.

Before using even safe products, you must wear household gloves.

Vinegar is the main enemy of bacteria

Many housewives prefer to use table vinegar in the fight against harmful microorganisms, as a practical and inexpensive remedy. By its effectiveness, vinegar is not inferior to expensive household chemicals.

Vinegar cleaning sequence:

1. Pour at least 200 ml of table vinegar into the bleach container. For convenience, you can use a measuring cup.
2. Start the longest operating mode and set the maximum temperature. Make sure the water in the washing machine is hot and the heating element is working.
3. After the end of washing, it is necessary to pour 200 ml of vinegar into the container again. If desired, vinegar can be replaced with citric acid - it leaves a pleasant and fresh smell inside the drum. Start the rinse cycle.
4. After the end of the washing machine, it is necessary to repeat the process and turn on the rinse mode again. Now you don’t need to pour vinegar or add citric acid, just rinse everything with plain water.
5. After rinsing is over, you can open the door and wipe the inside of the drum clean with a dry cloth. Leaving wet spots is strictly prohibited.

The method is simple, fast, does not require any costs. The main thing is to subsequently follow the rules for operating the washing machine and prevent the recurrence of mold on the rubber.

Lemon acid

The sequence of simple and quick cleaning of the rubber of the washing machine with citric acid:

1. Work surface preparation. To do this, the rubber seal over the entire surface must be wiped with an ordinary damp cloth.You can also use a soft sponge for washing dishes and a mild soap solution. Use a sponge or cloth to wipe off dirt and debris on the seal.
2. Cover the seal with cleaner. It's best to use a heavier-textured laundry cloth. Soak the cloth in a surface cleaner, then rub the rubber around the drum cover liberally.

   You can not skip hard-to-reach places, this is the first hotbed of mold and fungus.

3. Close the door tightly and leave the machine for at least 2 hours. After the end of the specified time, the seal can not be wiped, but simply run the washing machine in the "Rinse" mode. It's better to do it a couple of times.
4. Pour in citric acid and turn on a short-term operating mode with a maximum temperature. Make sure the heating element is working properly.

After the above steps, the cleanliness of the rubber seal is guaranteed, you can safely proceed to washing clothes.

peroxide and boric acid

You can clean the rubber of a washing machine with the help of products sold in every pharmacy: hydrogen peroxide and boric acid.

Hydrogen peroxide cannot be applied directly to rubber, it must first be cleaned of mold before the process. This drug is very effective - it kills the remnants of bacteria that are not visible to the human eye, and then whitens the surface.

Hydrogen peroxide is the first enemy of the paintwork. Do not apply to enamel or paint.

Before using boric acid, it must be diluted with plain water. After dilution, the solution should be applied to the rubber seal with cotton wool and left for 1-1.5 hours, then rinsed off.

Before applying boric acid, it is necessary to protect the skin, simple household gloves are suitable for this.

Baking soda

Baking soda is an inexpensive and practical way to remove mold from both rubber and paintwork surfaces.

Soda diluted in water (one teaspoon per glass of water is enough) will not harm paint or enamel.

It is enough to wipe the infected surfaces several times with a sponge or household cloth, then rinse the solution with plain water.

Where to begin

To successfully clean the washing machine from mold, you need to find all the places where the fungus settled down. Check first:

• rubber seal around the door;
• tray for dispensing powder and rinse aid;
• a hose leading from the tray to the washer tank;
• drain hose and filter on it.

Everything that is possible, you need to try to clean it with ordinary detergents and a brush. Then all these places must be well treated, following the instructions, with a special composition for removing mold. It is sold in the economic departments. There are even chemicals designed to treat washing machines.

But black mold can also settle on the walls of the tank. How to clean hard-to-reach places that cannot be reached without disassembling the machine into parts? How is cleaning done in this case? To successfully clean the most inaccessible nooks and crannies of the unit, you need to understand why this scourge appears in the car at all.

When to Seek a Specialist

When independent methods do not work, folk, professional remedies do not help, the smell remains, it is not possible to determine its origin, it is recommended to contact a specialist, he will help get rid of mold.

A professional will disassemble the automatic washing machine, carefully check the details, advise which ones are better to replace, what to look for.

You can find out from the repairman which of the existing methods actually work, and which spoil, wear out the parts of the washing machine. It is recommended to follow the advice of professionals so that the unit lasts a long time, does not require replacement or expensive maintenance.

Fighting methods

You can get rid of mold in the washing machine with the help of commercial and home remedies. The former act faster and often more efficiently (due to the content of aggressive chemical components in the composition). Some folk recipes are beyond the power of serious defeats, but if the scale of the problem is small, start with homemade formulations.

Shop household chemicals

The market is replenished daily with new offers with improved formulas

But can all manufacturers be trusted? In order not to spend large sums of money in search of the "same" purifier, pay attention to the rating of proven and sought-after products

Table 1. Finished chemicals

Name	View	Producing country	Mode of application	Volume, ml	price, rub.
"Domestos Universal"	Gel	USA	Apply to the drum, wipe the cuff with a sponge dipped in the product. Leave for 4 hours. Then turn on the rinse cycle, followed by a 90° wash with citric acid added to the tray	1 000	120
"White"	Liquid	Russia	Pour the maximum possible amount of bleach into the compartment (the whole bottle), turn on a long wash cycle at high temperature. After 2 hours of operation, put on pause (1.5 hours). Continue washing by adding a liter of vinegar to the rinse aid compartment.	1 000	35
"Deo-anti-mold"	liquid concentrate	Russia	For 5 liters of water, 0.5–1 liter of concentrate is required (treat severely affected surfaces without diluting).	1 000	170
Cilli Bang	Foam	Great Britain	Removes black mold in 15 minutes. Spray inside the drum, after a quarter of an hour wipe with a washcloth, turn on the wash	750	300
neomid	Antiseptic concentrate with water in a ratio of 1:20.	Russia	Antiseptic helps in advanced cases. Apply to problem areas, wash off after 40 minutes	500	535
Savo	Spray	Czech	Eliminates and prevents the appearance of fungus and mold. The active substance acts for 15–20 minutes, then it is washed off with water.	500	160
Astonish Mold Mildew	Spray can	England	The method of application is similar to the previous one.	750	270

Advice. Using any store-bought mold cleaner, after the procedure, wipe the tank with a dry cloth and leave the door open for 2 days so that the machine is well ventilated. Work with chemicals with gloves.

homemade recipes

On the forums about home economics, you can find many stories about the fight against the fungus with folk remedies. But if you do not want to join the ranks of word of mouth, use ready-made, and most importantly, proven recipes.

Vinegar

Vinegar helps to get rid of the fungus in the machine, removing salt deposits. Do not use natural apple and grape formulations that may contain dyes and oils - traces will remain on the details of the machine. The best option is 9% table vinegar.

Pour additional vinegar into the drum itself

Pour 150 ml into the powder compartment, select the maximum temperature and wash cycle. Pause when starting rotation.To eliminate mold, 30 minutes is enough, for limescale - 1.5 hours. After waiting for the right time, remove from pause, complete the cycle. At the last stage, remove and clean the outlet filter, with acetic solution (50 ml of concentrate per 1,000 ml of water) treat the seals, drum, powder tray.

Soda

Soda is relevant in cases where we are talking about minor manifestations of the fungus. Prepare a slurry by adding water, and treat the seal collar, drum surface, and cleaning agent bins with this composition. As a tool, use a toothbrush (for hard-to-reach parts), thin brushes, sponges for washing dishes.

Keep the composition from half an hour to an hour. Finish the process by adding washing powder (1 tablespoon) to the tray and starting the machine. At the end of the wash, pull out and dry the outlet filter, wipe all surfaces dry, and ensure that the drum is ventilated.

Lemon acid

A safe tool in the form of a lemon helps to remove mold from the car. The effect will be noticeable if the fungus has affected small areas. More often, acid is used as a preventive cleaning every 3 months or to eliminate musty odors.

For the best effect, run the machine twice with lemon

Pour 250 g of lemon into a dry powder container and turn on the longest washing program. There is no need to pause in this case. After the end of the cycle, repeat all the usual steps to remove the filter, wipe parts, rubber, drum. Do not close the hatch or door until the machine is completely dry.

How to avoid mold?

It is an indisputable fact that any problem is easier to prevent than to eliminate.Therefore, you must adhere to simple rules when operating a washing machine:

• leave the container for supplying detergents and rinses, the door for loading laundry after the end of each wash to improve ventilation of the internal units of the machine;
• use traditional types of powders, since helium products are not completely washed out of the container and contribute to the development of mold;
• install the washing machine in a room with good natural light;
• improve ventilation of the room in which the washing machine is installed;
• establish strict control over the complete draining of water from the drum after each wash;
• at least once a week use the function of the washing machine with a high water temperature (boiling);
• correctly connect the hose to completely drain the dirty water and prevent sewage from entering the washing machine.

Incorrect connection of the drain hose to the sewer system leads to unpleasant odors from the washing machine.

At least once every six months, it is necessary to start the washing machine at maximum temperature without laundry. For this, 1 liter of vinegar and 400 g of citric acid are used. Such a mixture eliminates both the slightest signs of the birth of a new mold, and the destruction of the old one.

It is necessary to wash, wipe, dry the sealing rubber of the loading hatch of the washing machine after each wash. In this case, the appearance of the fungus is minimized.

What and how to do to prevent or defeat mold? The answer is simple! It is necessary to strictly adhere to the rules for operating washing machines, to carry out preventive work in a timely manner.Strict observance of routine maintenance during operation prolongs the "life" of the washing machine, reduces risks to human health.

Causes of mold in the washing machine and its danger

If you ignore the rules for caring for household appliances, a fungus will appear inside the drum, which is difficult to remove.

Causes of mold in the washing machine:

1. Poor drum care. Helium compositions, fabric softeners are not washed off the walls of the drum and plastic containers, leave a coating on the rubber seal in the form of mucus and a pest settles on it.
2. Poor disinfection. In a machine where clothes are not washed at a high temperature, but are used at 40-60 degrees, surfaces are not disinfected. You can get rid of the problem of mold by washing at high temperature.
3. cheap powders. Expensive household chemicals care for clothes and the drum of the machine. Bleach is an aggressive handy tool that helps prevent the appearance of fungus.
4. Fascination with gel-like laundry products. Air conditioners don't clean well. Manufacturers recommend that to get rid of mold, you need to alternate powder and gel.
5. Storing dirty things in a closed car. Dampness, dirt promote the growth of bacteria. Dirty clothes do not accumulate in the tank, but use the laundry basket.
6. Closed washing hatch. The machine should dry out regularly, you need to keep the door open until the water has completely evaporated from metal and plastic surfaces.
7. Water behind the rubber seal. It needs to be cleaned with a sponge. Otherwise, black mold will appear in the automatic washing machine, which will be difficult to get rid of.

How to permanently get rid of mold

Rules to help get rid of mold forever:

• after washing, it is better to keep the machine door open until it is completely dry inside;
• do not leave washed clothes in the washer;
• after washing, carefully remove moisture from the drum and the rubber seal outside and inside;
• at the end of washing, it is necessary to wash the detergent dispenser and dry it;
• run the machine every month without laundry at 90-100 degrees, using a bleach for cleaning;
• it is necessary to clean the washing machine 3-4 times a year with citric acid or vinegar in hot water;
• use water improvers (air conditioners, rinses) as little as possible - after them it is difficult to clean the tank from the fungus;
• regular cleaning of the filter and hoses helps to get rid of mold.

When following these rules, it is easy to clean the fungus from the walls of the tank and rubber at the time of its appearance - the spores will not have time to multiply and spread throughout the car. Regular cleaning and drying will extend the life of the washing unit. Pathogenic spores, bacteria will not get on linen and in the respiratory tract of family members and pets. The fight against mold will save both equipment and the health of the inhabitants of the house. Now you know what to do if mold appears in the washing machine and how to get rid of it forever.