Where is used
The burner in question is designed to work with solid fuel and combined heating boilers, which are equipped with external connected burners. It burns high-calorie pellets and does not require frequent fuel supply. The device does not need the constant attention of the owner, does not leave dirt in heating equipment and contributes to obtaining a clean flame without smoke.
Take note that the ash that remains after burning fuel can be used to feed agricultural crops. Wood ash is an excellent fertilizer, containing a lot of potassium, calcium, iron, various trace elements and nutrients.
The Pelletron 15 burner is designed for domestic use, for heating small country houses and large houses outside the city. Of course, it can also heat utility rooms, small buildings for production. The device is easily connected to many modern heating boilers and does not require special settings and frequent maintenance.
Difference burner Pelletron 15
The Pelletron 15 burner was made specifically to work with universal heating boilers that can operate on various types of fuel.Such boilers have backup burners - gas, liquid, and pellet. The above burner device will save the owner from the time-consuming process of loading new volumes of fuel. For this purpose, a large bunker is also installed.
Learn more about gas, pellet and diesel burners
Timely loading of new portions of pellets is a problem for many residents. To maintain the temperature in the house, sometimes you need to get up even at night, if you don’t want to wake up in the morning from the cold. The Pelletron 15 burner will easily solve the problem of stable heating.
The following technical features of the pellet burner Pelletron can be distinguished:
- Operating power - from 3 to 15 kW for heating an area from 30 to 150 m², respectively.
- Built-in storage capacity for pellets - 56 liters / 34 kg of pellets.
- Fuel consumption is 220 g/kW*h.
Storage for pellet pellets is quite large. In the warm-up mode, when the burner is operating at maximum power, the consumption of such volumes that the bunker becomes empty after 10-15 hours. After warming up the heating system, a single load will be enough for up to 60 hours.
The gravitational pellet burner Pelletron 15 has no mechanisms responsible for supplying fuel. In this case, the fuel is in the combustion chamber with the help of gravitational forces, that is, it is filled by gravity, under its own weight. The pellets are burned almost completely and leave a minimum amount of ash. In addition, inside there is protection against sudden ignition of fuel in the bunker itself, so you should not be afraid of a possible fire.
As users confirm and reviews testify, the Pelletron wood pellet burner is fully automated. Its power is adjusted manually - 3-15 kW. The device does not fade, because in this case there is no kindling automation.
It does not take much electricity, about 0.004 kW / h. In case of failures in the power supply network or overheating of the liquid in the system, the operation will be stopped.
To avoid interruptions in the supply of electricity, Teplovan recommends installing an uninterruptible power supply
Two modifications of Pelletron 15 pellet burners are known - these are 10 MA and 15 MA.
| Model | 10 MA | 15 MA |
|---|---|---|
| power, kWt | 2,5-10 | 2,5-15 |
| Room area, m² | 70-100 | 100-150 |
| Efficiency, % | 95 | |
| Consumption of pellet granules, kg/kW*h | 0,22 | |
| Bunker, kg | 34 | |
| Cost, rub. | 16 900 | 17 900 |
The Pelletron burner device under consideration can be easily installed independently on many double-circuit solid fuel boilers.
Boiler device Vector
The vector solid fuel unit is made on the basis of a branded burner. It includes the following main elements: a bunker tank for a fuel reserve, a combustion chamber equipped with a pellet burner, a heat exchanger made of metal pipes with the possibility of three-way movement of the coolant, an air blower and an ignition heater.
- Removal of products of combustion,
- upper rotary chamber of the heat exchanger,
- three-way shell and tube heat exchanger,
- flare furnace,
- the lower rotary chamber of the heat exchanger,
- ash collection box,
- combustion air supply
- fuel resource.
Structural features
The combustion chamber has a horizontal design, made for flare combustion.At the end of the furnace there is a hinged door with a built-in Pelletron M burner. To increase the heat removal area, the solution is to place the combustion chamber inside the water jacket, which surrounds it in a circle.
At the back of the pellet boiler there is a vertical heat exchanger made of steel pipes. The incandescent streams of flue gases passing through it participate in heat exchange with maximum efficiency and share their heat energy.
The upper section of the heat exchanger is equipped with a smoke exhaust pipe and a smoke exhaust motor. The turbofan creates forced draft and removes combustion products to the street, which decompose during photosynthesis.
The reserve of pellets is provided by the bunker, with their subsequent supply to the furnace burner. The granules from the bunker enter the burner, where they are mixed with air and burned with the release of heat. The volume of the bulk hopper is determined according to the characteristics of the boiler output. The bunker should be kept clean, avoiding clogging with foreign inclusions.
The pellet boiler Vector is declared as a device with continuous operation up to 4 days according to the set mode. During operation, the required temperature of the coolant is maintained. The regulation of heat transfer by heating devices (radiators, underfloor heating systems, etc.) occurs by changing the flow rate or by adding a coolant.
The power characteristics of the machine are adjusted automatically by the control unit. Pellet boiler Vector is equipped with multifunctional sensors that provide a protective blocking of equipment operation in case of:
- excessive heating of the feeder;
- exceeding the specified temperature regimes for the coolant;
The unit is equipped with the necessary complex for organizing a fire extinguishing system. Connecting the equipment to the electrical network is carried out in accordance with the wiring diagram attached to the operating instructions. A prerequisite for operation is the use of a circuit breaker and a residual current device. Grounding of the unit is also a mandatory requirement.
Boiler Pelletron
The company presents three models with power modifications, from domestic to industrial units. In more detail, we will consider a domestic boiler, since it is he who is most often in demand in the heating system of a private house.
VECTOR 25/36/50 is a vector pelletron boiler, as the manufacturer's slogan says: turn it on and forget it. The boiler turned out to be economical. Requires little maintenance time. Works in automatic mode. Pellet boiler vector serves as a heating device with the possibility of a hot water supply device (DHW). The performance of the boiler varies within three modifications and reaches a maximum of 50 kW. Able to cope with heating in a room up to 500 sq.m.
V-100 / V-200 is a line of powerful industrial units. Pellet boiler Pelletron – V is able to operate automatically, according to the programmed parameters. Enlarged bunker receiver with a size of 5 cubic meters. It is used in heating industrial facilities with the possibility of installing a hot water supply system. The line is represented by two models, with power from 100 to 200 kW. The heated area reaches 4000 sq.m.
COMPACT 20/40 - Pelletron compact, the most affordable model operating in semi-automatic operating conditions.Pellet boiler Pelletron compact is used only for heating. It is delivered in two options of power 20-40 kW. Heats an area of 100-400 sq.m. The parameters are adjusted and controlled manually.
Pellet boiler Pelletron Vector
Most popular because it is designed to run on pellets. The boiler was not converted from a solid fuel boiler by installing a pellet burner, but it was developed from scratch.
Thanks to technical solutions, the time interval of the boiler's operation from a single load of granular fuel was increased. In addition, it was possible to reduce the consumption of pellets and reduce the time for maintenance, which eventually added positive reviews to the collection of the pelletron boiler.
Torch burner Pelletron vector, designed in such a way that it is permissible to use granules of “gray” pellets containing bark. The burner is equipped with a movable grate, moving in a reciprocating direction, it loosens the sintered ash and it freely falls into the ash receiving container.
Pelletron deserves another good review, as the use of gray pellets significantly reduces operating costs. In addition, it is easier to find a seller of pellets with low prices.
