Wall mounted infrared heaters

How to choose an infrared heater for a summer residence

Now we come to the most important question - how to choose an infrared heater for a summer residence. Immediately mention the fact that for economical heating you will need a thermostat. It can be built-in or plug-in, mechanical or electronic. The highest efficiency is provided by electronic temperature controllers, which more accurately maintain the set temperature.

Next, you need to decide on the operating conditions and the presence of certain energy carriers. If there is main gas in the country, nothing prevents you from using gas country infrared heaters.They are economical and provide relatively cheap heating. Their disadvantage is that for indoor use it is required to provide good ventilation. But if you plan to heat terraces or verandas, then gas heaters will be an ideal option.

The same heaters can operate on gas cylinders of various capacities - these can be full-fledged cylinders with reducers or miniature cylinders with collet connectors.

By installing a gas infrared heater in your summer cottage, you can enjoy pleasant evenings on the street.

Economical electric infrared wall heaters for summer cottages, these are the carbon models mentioned above. They provide fast warm-up with minimal energy costs. If necessary, they can be placed on the floor, forming one or another direction of infrared radiation. Similar heaters can be used for heating outdoor areas, verandas and terraces.

Wall-mounted quartz heaters are useful for space heating. They are quite thin and tiny. Being mounted on walls, they will provide the generation of directional infrared radiation. If you do not want to use wall-mounted equipment, you should look at film ceiling heaters. Their advantages:

• low power consumption;
• ease of installation;
• high fire safety;
• the ability to work in premises of any purpose.

The disadvantage of such heaters will be their high cost, but it will quickly justify itself.

To heat the cottage, you can use ordinary ceiling infrared heaters, including for false ceilings. They do not clutter up the space and provide good heating.Complete them with a thermostat, which will help maintain the desired temperature and ensure economical energy consumption.

When installing thermostats, avoid direct sunlight. Thermostats should not be located in the range of infrared heaters, as this will cause their direct heating and failures in maintaining the temperature.

Advantages and disadvantages

There are many varieties of electric infrared heaters. They have the same principle of operation, there is only a difference in the design and type of radiating material. Infrared heaters have become widespread, and today they are used not only as auxiliary, but also as the main heating equipment. They heat living rooms, kitchens, bathrooms, ancillary rooms, garages, outbuildings, production workshops and much more - the scope is almost unlimited.

We will talk about the varieties and features of infrared electric heaters in the next part of the review, for now we will consider their general advantages and disadvantages.

Advantages:

The undeniable advantage of infrared heaters is the ability to use them outdoors.

Compactness - infrared heaters, even of the highest power, are small in size. Some of them are so thin that they can be hung on the wall like a picture (some models are made in such an unusual form factor);
High efficiency and economy - for all varieties this indicator is different, but in general it is so

Separately, you should pay attention to carbon models - with a power of 1 kW, they can heat 22-25 square meters. m

residential or non-residential area;
Ease of control - provided by built-in or plug-in thermostats;
Ease of deployment of the heating system - in order to create heating in the house, you only need to determine the area of ​​\u200b\u200bindividual rooms and purchase electric infrared heaters of suitable power, while classical heating requires laying pipes and installing heaters;
Safety - if an electrical appliance is in good working order, it is safe. The same applies to infrared heaters. They are electrical appliances, but they do not have a conductive coolant, which in the event of an equipment failure can only aggravate the situation;
The ability to work in open areas - for this, outdoor electric wall or floor infrared heaters are used. And here they give pretty decent results, giving warmth and comfort;
Possibility of operation in wet rooms - for this you need to choose a device with a protected housing;
An abundance of modifications - allows you to solve any problem of space heating. For example, with their help, you can organize the main or auxiliary heating. Certain types of heaters can even be rolled up and taken away with you (for example, from a summer house to a city). There are also film heaters that are sewn to the ceiling and allow you to create an invisible heating system.

Let's take a look at some of the disadvantages:

IR heaters installed too close to your family's resting places can cause headaches and dry skin.

• You need to monitor the health of the equipment - if you want to ensure that infrared heaters do not cause an accident, you should check them regularly. In particular, the electrical wire and the resistance between the wires and the case (more precisely, its absence) need to be checked;
• High cost - the devices themselves are cheap if you compare their total cost for heating a house with the cost of a full-fledged water heating system. But operating costs, when compared with gas costs, remain high;
• Infrared electric heaters can cause headaches - to prevent their unpleasant effects, you must follow the rules for operating the equipment.

Despite some shortcomings, electric infrared heaters continue to be popular heating equipment for summer cottages, country cottages, small workshops, utility rooms and even greenhouses.

Noirot Royat 2 1200

We have already talked about Noirot electric convectors in detail, now let's recall one of the most popular Noirot Royat 2 1200 models, which is installed on the wall. This model is capable of operating in three modes, so it can be used in rooms of different sizes and ceiling heights. The main feature of this model is the ability to set the impact zone within a radius of 30 degrees. The model is turned on with a convenient switch. On the case there is a practical control unit.

Noirot Royat 2 1200 is one of the best heaters

Here are some of the main advantages of this model:

the average price is 8 thousand rubles, due to which it can be called affordable;
compact dimensions: 45, 12, 11 s;
housing is waterproof

Therefore, this heater can be installed in bathrooms;
installed various surge protection systems;
it warms up the rooms well and works quietly, which is very important, since the sound of the heater always frightens or annoys;
the unique heating element does not dry the air, so that the room always maintains a comfortable temperature and climate. Despite a number of advantages, we highlight the disadvantages that you should also be aware of:

Despite a number of advantages, we highlight the disadvantages, which are also worth knowing about:

1. It is far from always convenient to regulate the power of its work with a rope. As a rule, this process will take some time to get used to.
2. Rather high cost, but it is completely compensated by its performance and safety.

How to choose a ceiling infrared heater

Ceiling infrared type devices are installed in residential buildings, in open areas, in greenhouses and in industries.

What are IR devices

There are IR devices for outdoor and indoor installation on the market. Manufacturers produce household and industrial models that differ in appearance, heating temperature and power. There are samples for rooms with a high level of humidity (saunas) and with explosion protection.

Ceiling-type infrared heaters are:

• with and without thermostat
• gas;
• electrical;
• with open and closed coolant.

There are differences in the wavelength emitted by the device:

• shortwave, designed for rooms with a height of 6 m;
• medium wave - for objects 3-6 m high;
• long-wave - installed in rooms up to 3 m high.

Heating elements are:

• carbon fiber (heating occurs due to carbon filaments);
• quartz (heating is carried out by a tungsten filament);
• ceramic (the case of such a device does not heat up);
• tubular (heaters);
• halogen (the coolant is an inert gas, which is in the tube).

Manufacturers produce low and high temperature models. For small rooms choose dark samples (do not glow when heated) with low temperatures. For large production areas, light-type heaters are chosen. They are used in stadiums, warehouses, open marketplaces.

For greater efficiency of the ceiling-type IR heater, a thermal curtain is installed together with the device. It retains heat and reduces energy losses.

Advantages of infrared heaters

The efficiency of devices is 95-98%. The room is heated vertically, in the direction from bottom to top. Thanks to this, heat fills the room faster, energy consumption is reduced by 5-10% for each degree saved. The operation of IR devices does not require constant human control. They are cheap compared to other heaters. Since ceiling systems are static and contain no moving parts, maintenance is minimal and no maintenance is required.

Also, IR heaters have advantages in comparison with other types:

• high heating rate;
• since there are no fans in models of this type, they operate silently;
• easy and quick to install;
• do not emit light;
• fireproof;
• the possibility of heating a separate zone of the room is provided;
• IR rays have a positive effect on the body.

Minuses

A relatively new type of equipment for space heating has a number of disadvantages:

• after turning off the room cools quickly;
• there is a limitation in the power of the heat flux (if it exceeds 350 W / m², the radiation becomes harmful to the body);
• paintings, objects made of artificial materials are not placed in the zone of action of the rays (they can be deformed when heated);
• when buying a ceiling appliance, take into account that the distance from the heating source to the person’s head must be at least 50 cm;
• installation on a ceiling made of materials that are not resistant to heat is not allowed.

Subtleties of choice

Depending on the heated area and operating conditions, the number of heaters is calculated. For a small room, one device is installed, for working in large areas - several. When choosing a model, a number of indicators are taken into account.

1. Before choosing a ceiling infrared heater, determine on what area it should work. For industrial, office and warehouse premises of a large area, powerful light-type heaters are chosen.
2. An important indicator is the condition of the ceiling. Beams, ceilings, tension structures must support the weight of the model.
3. The height of the ceiling must ensure normal heat flow.
4. Heat carrier type.
5. For ceiling mounting, light models with an aluminum case, film devices are chosen.
6. The presence of a remote control, overheating sensor, thermostat in the sample. With these devices, the maintenance of the model is simplified.
7. Several models are installed on a large area.

Subject to the selection rules, the device will last a long time, and power consumption will be minimal.

Installation subtleties

Heaters are installed parallel to windows, doors, external walls.If you plan to install several devices, make a calculation to ensure uniform heating of the room.

One heater, mounted on the ceiling at a height of 2.5 m, operates on an average of 20 m². On sale there are suspended heaters and built-in models.

The best wall-mounted infrared heaters

Wall-mounted heaters also do not take up much space and are suitable for both primary and secondary space heating. They can be placed next to a work desk or sofa for local impact.

Hyundai H-HC2-40-UI693 - a large heater for spacious rooms

5

★★★★★
editorial score

90%
buyers recommend this product

See review

High power and increased dimensions make this heater suitable for large rooms. It can be used not only as an additional, but also the main type of heating. In addition to wall mounting, the model also provides for ceiling mounting.

Hyundai H-HC2 is suitable for semi-open spaces and can be used as a small air curtain. The IR heating element is hidden behind the case, which prevents burns.

The equipment does not emit visible light, operates silently and does not dry out the air. Produced in Russia, the birthplace of the brand is South Korea.

Advantages:

• High power;
• Silent operation;
• Hidden heating element;
• Work in semi-open spaces;
• Universal installation.

Flaws:

There is no remote control.

The H-HC2-40-UI693 heater from Hyundai is suitable for large residential and non-residential premises, it can be used in apartments, cottages, garages, offices or factories.

Timberk TCH AR7 2000 is a high quality device with economical energy consumption

4.9

★★★★★
editorial score

87%
buyers recommend this product

High performance with low electricity consumption are the main advantages of the heater of this model. It is equipped with a reliable, durable heating element, easy to mount on the wall and does not require constant maintenance.

The device is protected from overheating and can be used in the absence of people in the room, as it is protected from fire. A high degree of moisture resistance makes it suitable for rooms with high humidity and poor insulation. The country of production is China, although the brand is Swedish.

Advantages:

• Profitability;
• High performance;
• Overheat protection;
• Resistance to high humidity;
• Power adjustment;
• Small width.

Flaws:

The thermostat is only available as an option.

Timberk's TCH AR7 2000 infrared heater is ideal for medium-sized residential or industrial premises.

Ballu BIH-LW-1.2 - ergonomic model

4.7

★★★★★
editorial score

86%
buyers recommend this product

A compact heater from the Dutch manufacturer perfectly copes with its purpose in any room - with a low and high level of insulation.

The built-in quartz lamp quickly heats objects within the range of the device, while emitting a soft orange light comparable to the sun's rays. It is comfortable to be under the heater during the day and in the evening, but it is uncomfortable to sleep.

Thanks to the built-in bracket, the case can be tilted up to 5 steps in 15° increments. It can be installed to a height of up to 2.5 m, while it has compact dimensions and does not occupy the usable space of the room.

Advantages:

• outdoor efficiency;
• Tilt bracket included;
• Compact dimensions;
• Fast heating;
• Economical electricity consumption.

Flaws:

Glow orange light is not for everyone.

The BIH-LW-1.2 Ballu heater is suitable for apartments, cottages, loggias, summer cafes, gazebos and any other indoor and semi-open space.

Thermophone ERGN 0.4 Glassar - stylish and modern

4.5

★★★★★
editorial score

81%
buyers recommend this product

In appearance, this IR heater resembles a plasma TV, but it is intended for local heating of residential premises.

The model is produced in white and black colors, organically fitting into most modern interiors. The case is made of glass, which acts as a radiating panel.

During operation, the heater is almost silent, does not give a visible glow. It is protected from overheating and equipped with a built-in thermostat.

Advantages:

• Stylish design;
• thermostat;
• Overheat protection;
• No visible glow;
• Slim body.

Flaws:

Little power.

The ERGN 0.4 Glassar heater from the Russian company Teplofon is suitable for small enclosed spaces.

The best shortwave infrared heaters

Short-wave heaters provide the fastest warming up of the premises. They are valued for their high performance at an affordable purchase price.

Ballu BIH-LM-1.5

Main characteristics:

• Power, W - 1500/1000/1500 W;
• Recommended heating area, sq. m. - 25;
• Management is mechanical.

Frame. The infrared floor-type heater has a durable, heat-resistant paint-coated rectangular body measuring 35x46x31.5 cm, mounted on a pair of supports made of bent metal tubes. The front grill protects the heating elements from accidental contact and mechanical damage.Ventilation holes prevent excessive heating of the walls, which eliminates the risk of burns. The device can be carried by holding the wide handle.

Air vents Ballu BIH-LM-1.5.

Control. A pair of switches is installed on the side surface, allowing you to use 1/3, 2/3 or the full power of the emitter, designed for a maximum consumption of 1500 watts.

Switches Ballu BIH-LM-1.5.

Heating element. The source of heat waves here are three quartz tubes fixed in a horizontal position. A wide reflector made of heat-resistant stainless steel creates a directed stream of soft radiation. Its surface does not lose its original luster during the entire service life.

Quartz tubes Ballu BIH-LM-1.5.

Pros of Ballu BIH-LM-1.5

1. Compact dimensions and weight of only 3.5 kg.
2. Quality accessories.
3. There is a compartment for laying the power cable.
4. Simple power control.
5. Safety shutdown in case of capsizing.
6. Affordable cost.

Cons of Ballu BIH-LM-1.5

1. Short wire.
2. Narrow heating sector.
3. You cannot change the angle of inclination.
4. Plain appearance.

Hyundai H-HC4-30-UI711

Main characteristics:

• Power, W - 3000;
• Recommended heating area, sq. m. 35;
• Thermostat - yes;
• Control - mechanical, temperature control.

Frame. The device for local heating is enclosed in an oblong metal case measuring 1010x95x195 mm. The decoration contains elements of heat-resistant plastic. The heater is sold with a wall mounting kit. Additionally, you can purchase a tripod that turns it into a mobile model. The direction of radiation is adjustable.The weight of the product is slightly more than 3 kg.

Control. The degree of heating is smoothly regulated by means of a mechanical thermostat located on the end wall. The maximum power reaches 3 kW, which is enough to quickly warm up rooms with an area of ​​30-35 sq.m.

Heating element. Thermal waves are generated on a long tube with a stainless reflector. The protective metal lattice reliably protects it from mechanical influence.

Pros of Hyundai H-HC4-30-UI711

1. High power.
2. Quality build.
3. Silent operation.
4. Stylish appearance.
5. Universal mount.
6. Smooth setting.
7. Built-in overheat protection.
8. Acceptable price.

Cons of Hyundai H-HC4-30-UI711

1. With a recommended installation height of at least 1.8 meters, not everyone can control the mechanical thermostat located on the case.

Timberk TCH A3 1000

Main characteristics:

• Power, W - 1000;
• Mounting options - wall, ceiling;
• Management - the ability to connect a remote control, the ability to connect a room thermostat.

Frame. This model is designed for ceiling or wall installation at a height of about 2.5 m. It has a lightweight aluminum case measuring 93.5x11x5 cm. The weight of one product does not exceed 2 kg, which makes installation extremely simple. The front surface of the device is protected from mechanical damage by metal brackets.

Control. The infrared heater in the working position is located at a considerable height, therefore, a remote control is provided for controlling it, which is not included in the price of the device. It is possible to turn off by timer and operate in automatic mode with correction according to the readings of the room thermostat.

Heating element.The source of thermal energy here is a straight tubular heating element with a reflector made of stainless steel. Power consumption reaches 1000 W, which is enough to heat small rooms or local work areas.

Pros Timberk TCH A3 1000

1. The high quality of the materials used.
2. Silent operation.
3. Possibility of remote control and automatic operation.
4. Aesthetic appearance.
5. Easy installation.
6. Low cost.

Cons Timberk TCH A3 1000

1. Little power.
2. The remote control and power cable must be purchased separately.
3. The instruction in Russian is not attached, but it can be found on the Internet.

Heating efficiency and speed

According to the speed of heating the room, heating devices can be arranged as follows:

1. Fan convectors;
2. Infrared heaters;
3. conventional convectors.

But there is one nuance in this rating. If you heat a room with an infrared heater, the air in it will heat up more slowly than when heated with convectors. But all objects in the room will heat up faster.

Example:
If you turn on the convector, it will quickly warm up the air. But as soon as you sit down in a chair, you will feel that it is rather cold. And it will take a long time to warm up.

When you turn on the infrared heater, it will start heating everything in the room (walls, floors, furniture, household items). And they will give off heat to the air. Heating will be more even. But the comfortable temperature will have to wait longer.

Disadvantages and cons

And now, after a colorful description of all the advantages, it is worth talking about the cons. One of the main ones is still insufficient power. As you know, to heat a room of 10m2, an average of 1kW of power is required.

These heaters are good in very small rooms. Do not expect any miracles from a single picture hung in the bedroom or hall.

For example, such a film heater will never be able to raise the temperature from 18 degrees to 25. Yes, you can send radiation from it to the bed and warm it up to a comfortable temperature. But it can be done much more efficiently and faster with a heated blanket or sheet.

For a specific rise in temperature in the apartment, your walls should be literally hung with such warming pictures. And in this case, just forget about free sockets.

As you understand, in this case it would be simply ridiculous to talk about energy efficiency and some kind of savings.

If you want to warm up some small room, clog all the windows and entrance doors to it. Only a day later you can really feel the temperature increase by several degrees.