Overview of storage water heaters with a capacity of 100 liters

What should you pay attention to when choosing a water heater?

The choice of an electric water heater is a responsible decision and can affect not only you, because in the event of a malfunction, you can flood your neighbors, cause a short circuit in the electrical network, and so on. Therefore, you should not consider cheap and promotional options - cheap has never been of high quality.

Before visiting the store, it is worth assessing the condition of the electrical wiring in your home, as different water heaters have different capacities.The choice of tank volume also depends on the power - the more powerful the device, the faster it heats the water and the smaller the volume of heated water required.

The needs for which a storage water heater is purchased should be assessed. A device with a tank of about 10 liters is suitable for washing hands and performing other household operations, but will not be enough for taking a shower, the minimum tank size for such needs is 30 liters. For a small family, a device with a capacity of 50 - 80 liters is suitable. For a family of 4 or more people, a water heater with a tank of at least 100 liters should be installed.

The best storage water heaters from 100 l

quality storage water heaters 100 liters and more are suitable for large families or for the autonomous organization of hot water in a house or apartment. Modern modifications have their own differences - despite the large volume, they are economical. The developers managed to realize the possibility of long-term retention of heat in the tank, so secondary heating is rarely required.

The choice of a full-fledged hot water supply device must be correct, because the heaters are in the highest price category. The selection from our editors includes 4 models that best meet the highest requirements of quality and durability. It is the best choice for any buyer purchasing a device for residential or commercial purposes.

1.Hyundai H-SWS11-100V-UI708

Due to the use of modern materials, the economical boiler of the Hyundai brand retains heat for a very long time, thereby significantly reducing energy consumption. This allowed the manufacturer to reduce the power of the heating element to 1.5 kW without increasing the cycle time.The volume of 100 liters and a high maximum temperature make this inexpensive storage water heater a good alternative to centralized water supply, even for a large family

According to customer reviews, the build quality and reliability of the device did not suffer due to the low cost and deserve special attention from those who appreciate a large resource.

Advantages:

• cools down for a long time;
• inexpensive;
• profitability;
• three heating modes;
• high service life;
• low price.

Flaws:

underdeveloped service network.

2. Ballu BWH/S 100 Rodon

This model has established itself as a good storage electric water heater with a multi-level protection system.

A reliable safety valve, blocking in case of overheating and switching on without water, excellent thermal insulation make the device safe to use, which is especially important if there are children and animals. It also makes it possible to leave the water heater unattended for a long time, without fear of leaks and other undesirable consequences.

The device is made of good materials to ensure the longest possible life, which is confirmed by the eight-year warranty. The boiler works very quietly - even during the intake of water it is almost inaudible. According to the owners, there are no critical shortcomings, only the complexity of visual control over the inclusion is noted.

Advantages:

• high reliability and safety;
• good thermal insulation of the case;
• stainless steel tank with anti-corrosion coating.

Flaws:

inconvenient location of the power indicator and adjusting wheel.

3. Gorenje GBFU 150 B6

An excellent wall-mounted electric water heater from a Slovak company will become a reliable assistant in domestic conditions.The developers took care of safety - 4th degree of protection against water, a safety valve, a heating temperature limiter, and a magnesium anode. A capacious 150-liter tank is enameled on the inside, and the manufacturer installed durable dry heating elements as a heater. The heater is suitable for installation in a private house - it has a frost protection function. There are also other functions - thermostat, power indicator.

Advantages:

• vertical or horizontal installation;
• frost protection;
• resistance to corrosion;
• affordable price.

Flaws:

average heating rate.

4. Ariston ARI 200 VERT 530 THER MO SF

When looking for the most capacious device in the rating of storage water heaters, the ARI 200 model will be the only right choice. The manufacturer tried to create an ideal high-end device: Titanium + titanium enamel on the inner surface, 5 degree of protection against leaks, a protective valve. The accumulator with a capacity of as much as 200 liters of liters is fully heated in 5 hours to a maximum temperature of 75 degrees. Mechanical control, but very simple and convenient. The model is simple and devoid of a number of functions, which made it possible to reduce the cost without sacrificing Belgian quality.

Advantages:

• durable Titanium+ protective coating;
• convenient management;
• corrosion-resistant heater with magnesium anode.

Flaws:

high price.

The best storage water heaters for 100 liters

Large volume boilers are most often in demand in residential areas where there is no water or supply occurs very rarely, in summer cottages and in country houses. Also, a large device is in demand in families where the number of members is more than 4 people.Any of the 100-liter storage water heaters proposed by experts will allow you to bathe and perform household tasks with hot water without turning it on again.

Zanussi ZWH/S 100 Splendore XP 2.0

A rectangular compact boiler with a large capacity will allow you not to limit yourself in water procedures, while saving electricity and free space in the room. Stainless steel will protect against dirt, damage, corrosion. For comfortable control, the Smart electronic system, display, light indication and thermometer are provided. Power Zanussi ZWH / S 100 Splendore XP 2.0 2000 W, the check valve will withstand pressure up to 6 atmospheres. Protective functions will save the device from running dry, overheating, scale and corrosion. It will be possible to bring water to 75 degrees in an average of 225 minutes.

Advantages

• Compactness and light weight;
• Clear management;
• Water sanitation system;
• Timer;
• Safety.

Flaws

Price.

Maximum heating accuracy down to a degree ensures uninterrupted stable operation. Good thermal insulation and anti-freeze preserve the integrity of the body, and this guarantees a long service life. The manufacturer notes that inside the tank the water is disinfected. Inside the Zanussi ZWH / S 100 Splendore XP 2.0, a good check valve and RCD are installed.

Ariston ABS VLS EVO PW 100

This model demonstrates impeccable aesthetics and concise design. The steel snow-white body in the shape of a rectangle does not take up as much space as round boilers with greater depth. The increased power of 2500 W guarantees heating up to 80 degrees much faster than expected. Mounting can be either vertical or horizontal.For clear control, there is a light indication, an electronic display with information and an accelerated work option. Safety is ensured by a temperature limiter, overheating protection, non-return valve, auto-off. Unlike other nominees, there is a self-diagnosis here.

Advantages

• Convenient form factor;
• 2 anodes and heating element with silver for water disinfection;
• Increased power and fast heating;
• Display for control;
• Good security options;
• Exposure to 8 atmospheres of water pressure.

Flaws

• There is no fasteners in the kit;
• Unreliable display electronics.

In terms of quality and functions, this is an impeccable device for home use, which is confirmed by numerous reviews. The control system is not so durable, after some time it can issue inaccurate information. But this does not affect the performance and safety of the Ariston ABS VLS EVO PW 100 boiler.

Stiebel Eltron PSH 100 Classic

The device guarantees a high level of performance, classic design and quality. With a volume of 100 liters, it can operate at a power of 1800 W, heating water in the range of 7-70 degrees, the user sets the desired option. The heating element is made of copper, resistant to mechanical stress, corrosion. The water pressure should not exceed 6 atmospheres. The device is equipped with protective elements and systems against corrosion, scale, freezing, overheating, there is a thermometer, mounting bracket.

Advantages

• Low heat loss;
• service life;
• High security;
• Easy installation;
• Convenient management;
• Ability to set the optimum temperature.

Flaws

• No built-in RCD;
• A relief valve may be required.

Unlike many nominees in this device, you can set the water heating mode up to 7 degrees.The boiler consumes not so much electricity, withstanding heat longer due to the polyurethane coating. The inlet pipe inside the structure provides 90% of the unmixed water in the tank, which also protects the water from rapid cooling.

The best manufacturers of inexpensive water heaters

Most domestic homeowners are looking at budget models when buying water heaters. Many manufacturers supply reliable products to Russia at affordable prices. Experts selected several popular brands.

Zanussi

Rating: 4.8

The leader in the ranking of budget water heaters was the Italian company Zanussi. Initially, the company produced cookers, and after joining the well-known Electrolux concern, the range of household appliances expanded significantly. Electric water heaters are represented by both storage and flow models. A somewhat more modest assortment of gas water heaters is presented on the Russian market. All products are distinguished by their exquisite design, the manufacturer is constantly introducing new models, updating equipment and improving technologies.

According to experts, which are confirmed by consumer reviews, the brand is an example of high quality at an affordable price of products. Water heaters serve homeowners for a long time, economically consume energy through the use of innovative technologies in production.

• high quality;
• affordable price;
• durability;
• economy.

not detected.

Ariston

Rating: 4.7

Another Italian company is considered the world leader in the production of household appliances, heating and water heating equipment. Products under the Ariston brand are supplied to 150 countries around the world.The company supplies several lines of water heaters to Russia. Equipment that uses energy from gas combustion is widely represented. This category includes storage and flow heaters, indirect heating boilers. Not inferior in assortment and electrical appliances.

The consumer is offered accumulative models with different tank capacity (from 30 to 500 liters). You can choose stainless steel tanks or choose enameled containers with additional protection with silver ions. Thanks to effective thermal insulation, the heaters are economical and durable.

• rich assortment;
• high quality;
• profitability;
• safety.

there are no devices with "dry" heating elements.

Thermex

Rating: 4.7

The international corporation Thermex is on the third line of the rating. It specializes in the production of electric water heaters. Therefore, the Russian consumer is offered models with different tank sizes, differing in power, type and purpose. The manufacturer boasts a huge number of innovations. To create new products, there is a large scientific laboratory, which employs the best scientists from around the world.

Accumulative models are made of stainless steel or biological glassware. Magnesium anode provides additional protection against corrosion. Users appreciated the range of water heaters. That's just a lot of complaints come in for leaks.

Tank quality. What material is it made from?

In order for the device you have chosen to serve for more than one year, you need to pay great attention to its quality and material of manufacture. Tap water negatively affects the boiler from the inside, so many manufacturers use steel and resort to coating the container with a protective compound

Pay attention to the inner coating - ceramics and glass-ceramics protect the product well from corrosion. Finely dispersed enamel as a coating also does an excellent job of protecting a steel tank.

Also, the effect of tap water affects the heating element of the tank. There are wet and dry types of heating elements. The first option is in direct contact with water, as a result of which scale forms on it, it undergoes corrosion, which ultimately leads to a breakdown of the heating element. Therefore, a wet heating element requires regular repair and replacement, while a dry heating element is isolated from water and is more practical. The price of a boiler with a dry heating element is higher than the cost of its counterpart, but for installation in an apartment it is better to give preference to just such a boiler.

Which storage water heater to buy

When choosing the best storage water heater, do not neglect the possibilities - power, capacity, functions. On the technical side, the device must meet all the needs of users, otherwise the purchase will be unsuccessful. One of the key factors is the capacity of the tank, if it is not enough, the heater will have to be loaded frequently, and this will affect its service life. The brand is important, but quality and functionality are more important. And the rating of the best storage electric water heaters will help limit the choice to only high-quality devices.

Question-answer of choosing a water heater

Buy an underfloor water heater. Safer. The exception is flow models that are not heavy.

How to buy a water heater cheap.

Saving on a water heater

Find great deals on promotions. Discounts reach 40%. Be prepared that the dealer will try to sell the marriage.Whatever you say, and no matter how you convince, first of all, stick to the scope of the guarantee. It will not be good to be left alone, clutching a broken water heater with grief for 8 rubles (the average monthly salary of a Russian from the outback).

Does a water heater need a magnesium anode?

A storage water heater needs an anode, a flowing water heater is an overkill. If the dealer says that the spare part is not installed, because the “dry” heating element, the third or tenth, call the factory for clarification. They will say that buying an anode for a water heater will be an extra step - make sure that there are no copper parts upstream and downstream of the device: supply pipes, instantaneous water heaters, bushings, couplings.

Where to get a water heater.

It's easier to order close to home. Buying a water heater is not an easy undertaking, unless you're Arnie in his prime. Instruments weigh 100 kg or more. Take care to carefully transport the equipment, free up space in advance. Take the dimensions, guided by the reference information of the Internet.

How to hang a storage water heater.

To prevent the device from falling, solid anchors are needed. Not always the fasteners of the kit are suitable. For plastered walls, problem masonry, hollow bricks, it is reasonable to use chemical anchors. The main thing here is not to get to the neighbors when drilling, be afraid to pay for repairs. It's better to overdo it than get hit on the hump by a filled water heater, which is unsuccessfully suspended above the toilet. Ceramics will shatter.

We tried to find Atlant water heaters on the Yandex market, unsuccessfully. What to do.

Where did the insulation resistance of 20 MΩ come from when checking the heating element.

Typical insulation resistance of current-carrying parts of household appliances, which is prescribed by the standards.The real value is greater, we do not aim to rewrite GOSTs by the forces of the VashTechnik portal. Just gave the order of numbers indicative.

This will help you avoid mistakes. Remember, today you will not always take a quality product for a promotion. Not every expensive thing is a model of durability. When buying a water heater, you need to rely on advice and your own discretion.

The best flat storage water heaters for 100 liters

Flat EWHs have a specific application. They are well suited for embedding in niches and other places where they will not interfere with residents. TOP 5 such devices are presented below.

Electrolux EWH 100 Centurio IQ 2.0

The rating of the best storage-type flat EWHs is opened by the Electrolux EWH 100 Centurio IQ 2.0 model. This wall-mounted pressure vessel has a universal arrangement (horizontal and vertical).

Electronic control with the ability to set the turn-on delay timer.

Water connection - bottom. The tank is made of stainless steel.

Specifications:

• heating element power - 2 kW;
• maximum heating - up to 75 degrees;
• heating time to maximum temperature - 228 minutes;
• pressure in the system - up to 6 atm;
• dimensions - 55.7x105x33.5 cm;
• weight - 24.1 kg.

Advantages:

• the ability to connect Wi-Fi;
• Electrolux Home Comfort mobile app (climatic appliances for Android 4.1 or ios 6.0);
• frost protection;
• convenient display with mode indication;
• increased service life;
• TEN dry type.

Flaws:

only an increased cost is noted, which is typical for flat models.

Zanussi ZWH/S 100 Smalto DL

Numerous positive reviews have a flat model Zanussi ZWH/S 100 Smalto DL.It is designed to provide several points of hot water consumption (pressure type).

Can be placed both vertically and horizontally.

The inner coating is high-strength enamel.

Electromechanical control is highly reliable. The model is distinguished by the presence of 2 water tanks.

Specifications:

• heating element power - 2 kW;
• maximum water temperature - 75 degrees;
• warm-up time to 75 degrees - 192 minutes.
• pressure in the system - 0.8-6 atm;
• dimensions - 57x109x30 cm;
• weight - 38.4 kg.

Advantages:

• small thickness;
• all necessary protections;
• the presence of a display with an indication of the mode;
• protective anode for water treatment.

Flaws:

• increased weight, which requires strengthening the wall when hanging the device;
• increased cost.

All shortcomings are covered by specific embedding abilities and high reliability.

Electrolux EWH100 Formax

The top three is opened by the Electrolux EWH 100 Formax model. This is a wall-mounted pressure unit that can be placed in a vertical or horizontal position.

Electromechanical control with good indication.

The inner coating is a special enamel.

Specifications:

• dry heating element power - 2 kW;
• mains voltage - 220 V;
• maximum heating temperature - 75 degrees;
• warm-up time to maximum - 230 minutes;
• pressure in the system - up to 6 atm;
• dimensions -45.4x88x47 cm;
• weight - 32 kg.

Advantages:

• accelerated heating mode;
• eco-mode with heating up to 55 degrees;
• economical consumption of electricity;
• reliable protection and safety.

Flaws:

• mechanical control,
• increased weight, which makes it difficult to hang the device.

Popularity is due to a successful combination of cost and power.

Pointu BWH/S 100 Smart WiFi

Among the leaders, the accumulative EWH Ballu BWH / S 100 Smart WiFi is especially noted. The model can be attributed to a flat variety, a pressure type with a universal location and wall mount.

It has electronic control, is able to work in the "smart home" system and has a Wi-Fi communication protocol.

Specifications:

• power of heating elements - 2 kW;
• maximum heating temperature - 75 degrees;
• time to reach the maximum temperature - 228 minutes;
• size - 55.7x105x33.6 cm;
• weight - 22.9 kg.

Advantages:

• stainless steel tank;
• the presence of a display with an indication of the mode;
• eco mode;
• USB connector for connecting to a Wi-Fi module.

Flaws:

not detected.

Zanussi ZWH/S 100 Splendore XP 2.0

The leader among flat storage water heaters is the Zanussi ZWH / S 100 Splendore XP 2.0 model. Its electronic control ensures easy maintenance and perfect control.

The device belongs to pressure type with universal installation.

The tank is made of stainless steel.

Specifications:

• heating element power - 2 kW;
• mains voltage - 220 V;
• maximum heating temperature - 90 degrees;
• pressure in the system - 0.8-5.9 atm;
• time to reach the maximum mode - 90 minutes;
• dimensions - 55.5x105x35 cm;
• weight - 24.1 kg.

Advantages:

• convenient and bright indication;
• fast heating;
• universal mounting method;
• antibacterial water treatment;
• turn-on delay timer;
• temperature setting accuracy 1 degree;
• protection against scale;
• power regulation.

Flaws:

not detected.