Overview of popular electric convectors with a power of 2 kW

Timberk TEC.E0 M 2000 – environmental friendliness and safety

The main task of the TEC.E0 M 2000 convector is to heat rooms up to 15-20 sq. m. Such equipment is worth buying both for use in an apartment, and for a summer residence or office. Operational safety is ensured by the presence of a protective sensor.

In addition, the design of the device allows both wall mounting and installation on the floor.The kit includes parts for two options - brackets and support legs. You can choose the optimal mode using a convenient regulator. The first stage provides a power of 1.2 kW, the second - 2 kW.

The technology features include the applied Heating Energy Balance technology. It increases the environmental friendliness of the use of the device and provides instant heating. Permissible microclimatic conditions will be obtained in just 30-60 minutes after turning on the device.

Among other reasons for buying - the resistance of the device to voltage drops, low weight, no noise during operation or shutdown. The latter feature allows the device to be used for heating living rooms, including a bedroom or a nursery.

Technology advantages:

• noiselessness of work;
• installation on the floor and fastening on the walls;
• lightness - the device weighs only 5 kg;
• compactness - the heater does not take up much space;
• the presence of power adjustment;
• fall protection;
• heating rate.

Cons of the device:

• drying air during work;
• the length of the cord, due to which the equipment will have to be placed close to the outlet;
• lack of wheels on the legs to move the device.

Comparative table of the cost of organizing heating

House area, m2	Heating method	Manufacturer and model	Total cost, rub.	The price of 1 kW of thermal power, rub.
60	Electric convectors	Ballu BEC/EZMR-2000 (3 pcs.)	3 000*3 = 9 000	1 500
	Electric convectors	REDMOND SkyHeat C4519S (3 pcs.): el. control, association and programming through the application	9 600*3 =  28 800	4 800
	Electric boiler and radiators	Protherm Skat 6 KR 13 + Rifar Base 500 x6 (4 pcs.) + harness	32 000 + 4 200*4 + 5 000 = 53 800	8 966,6
100	Electric convectors	Ballu BEC/EZMR-2000 (6 pcs.)	3 000*6 = 18 000	1 800
	Electric boiler and radiators	Protherm Skat 12 KR 13 + Rifar Base 500 x6 (9 pcs.) + harness	35 000 + 4 200*9 + 6 000 = 78 800	7 880
150	Electric convectors	Noirot CNX-4 1500 (10 pcs.)	6 300*10 = 63 000	4 200
	Electric boiler and radiators	Vaillant eloBLOCK VE 18 Rifar Base 500 x6 (13 pcs.)	39 000 + 4 200*13 + 9 000 = 102 600	6 840

As you can see from the table, the larger the area of ​​the house, the higher the cost of each kW of thermal energy obtained by heating with convectors and the lower by heating with an electric boiler. At the same time, the advantages and efficiency of an electric boiler are obvious.

How is a convector arranged?

First, let's talk about the devices themselves. Heating convectors work on the principle of the physical phenomenon of convection, according to which the heated air rises, and the cooling air falls down.

Each convector has in its body a hole for taking in a cold floor from below and a hole for supplying heated air from above. Inside the device there is a heating element - heating element. It can be electric or gas, but the speed and efficiency of heating your room or other room depends on its operation. Also, in any model of the convector there is a heater heating regulator - a thermostat. Some models of heaters are equipped with an electronic thermostat, others with a mechanical one.

So, cold air in your apartment or house is drawn into the convector, heats up, goes outside and rises to the ceiling. Cold air is displaced and goes down, where it enters the convector and heats up. As you understand, the change of air currents occurs almost imperceptibly for the one who is in the room, that is, you will not be blown alternately with cold or hot air.

What are convectors?

As we have already said, depending on the type of heating element used in the convector, the devices are divided into two types - electric and gas convectors. The former are more common in everyday life, they are convenient to heat small living quarters, apartments, rooms.It is better to buy a gas convector if you are going to heat a huge hall or house and have a centralized gas supply system at hand.

According to the type of installation, household convectors are also divided into two types - floor and wall. As a rule, good models of electric convectors are sold complete with legs for installation on the floor and with brackets for hanging the device on the wall.

Design

Electric convectors are endowed with durable housings with outlets. The design of cases can be both simple and more expressive. By releasing electric convectors, manufacturers strive to give their customers the opportunity to purchase equipment of any kind. Thanks to this, the sale appears:

• Electric convectors with a special shape of housings;
• Devices with an unusual color;
• Electric heaters with decoration with decorative materials.

Glass convectors look great in the interior.

Models with front tempered glass look best. The glass itself can be black, white, gray, colored and mirrored. Often some drawings or abstractions are applied here.

Designer electric convectors are the best suited for rooms with a good repair. They can be mounted both under windows and along blank walls, delighting consumers with their excellent appearance. Some models differ significantly in their cost, but this is typical for all non-ordinary equipment.

Glass electric heaters look best indoors. They work at the expense of a heating element made of glass, inside of which there is a conductive gel or a conductive coating. These devices are quite expensive, but they look just great.Some modifications are made on the basis of mirror glass, resulting in combined units - they combine heaters and bathroom mirrors.

The best multifunctional convectors

Of course, the heater will not start making coffee for you and will not take over the duties of an alarm clock in the morning. Additional functions, as a rule, make the convector more convenient and efficient when performing the main task - space heating. But other optional options may also be present in the device. Traditionally, we have chosen 4 excellent units for the category, but there are other worthy solutions on the market.

1. Timberk TEC.PF9N DG 2000 IN

Externally, the TEC / PF9N DG 2000 IN model completely repeats the device described above from the same brand Timberk

Only the colors differ here, and if a white rather than a black appliance suits the interior of your apartment better, then this is an important advantage. But the dimensions and weight are the same here - 80 × 44 × 9 cm and 8.3 kilograms

The security system of the Timberk convector is just great. The unit is protected against overheating, freezing, tipping over and moisture. Three power levels (2 kW, as well as 800 and 1200 W) and a choice of temperature in the range from 60 to 100 degrees allow you to create a comfortable environment, regardless of the weather outside the window.

Advantages:

• high power;
• temperature control;
• first class design;
• flawless assembly;
• high quality materials;
• convenient management.

Flaws:

stained tempered glass.

2. Ballu BEP/EXT-2000

Next in line is another device from the previously noted manufacturer Ballu. And even though the BEP/EXT-2000 is not the most powerful convector in the ranking, it definitely deserves attention because of its cool design and good functionality.

Control in one of the best Ballu electric convectors is electronic. And a particularly important plus of the unit against the background of competitors is the remote control. In conclusion, we also note the timer function (up to 24 hours).

Advantages:

• several power levels;
• you can set the timer;
• electronic control and remote control;
• parental control function;
• protection against overheating and overturning.

Flaws:

clicks while working.

3. Electrolux ECH/AGI-1500 MFR

The review continues with the convector of the most reliable manufacturer - the Electrolux company. The ECH/AGI-1500 model has two modes of operation - full and half power at 1500 and 750 watts, respectively. The manufacturer claims the efficiency of the heater in rooms of 20 square meters, but it is better to take into account a small margin.

One of the main advantages of the convector according to user reviews is a dust filter and a multifunctional air purification system. In particular, it will appeal to people with respiratory diseases and allergies. Also, the device has an advanced protection system: from moisture, overheating and tipping over.

Advantages:

• quality assembly;
• heating efficiency;
• low cost;
• thermostat operation;
• starts quickly;
• air filtration.

Flaws:

may overheat at maximum power.

4. Noirot Spot E-5 1500

What do buyers first of all pay attention to when choosing a convector manufacturer? Of course, on the reputation of the company and the reliability of its products. And it's hard to find a more worthy brand than Noirot

And although the model we have chosen with the official cost of 9599 rubles cannot be called the people's choice, its price is well deserved.

With a power of 1500 W, the device effectively copes with the heating of the declared 20 m2 area.The control in the heater is electronic, and a screen is available to control the temperature. Spot E-5 1500 has 4 operating modes, frost protection and shutdown function in case of overheating. The body of the convector is waterproof, and the device weighs 4.7 kilograms.

Advantages:

• warms up quickly;
• works effectively;
• does not dry the air in the room;
• corresponds to the declared area;
• uniformity of heating;
• reliability and durability of parts;
• small size and weight.

Flaws:

high price.

Working principle and classification

The design of the device for heat generation is quite simple: housing, air ducts, heating element, equipment for connection. The principle of operation is also not difficult: cold air from the environment enters the device. With the help of additional devices, it heats up and is released through the hole at the top of the device.

To save energy and maintain the optimum temperature, space heaters are equipped with temperature sensors. The main advantage of convectors over similar heat sources is safety. Temperature on the body of the device does not exceed +60°C.

In this video you will learn how to choose a heater:

Classification of convectors:

• by mode of action (water, electric, gas);
• by type of fastening (floor, wall, universal);
• according to the design of the heating element (monolith, heating element, needle).

See also: installation of floor convectors.

The advantage of gas convectors in comparison with water heaters is the independence of operation from low temperatures. The disadvantages include the significant dimensions of the installations, increased explosiveness. The best choice for heating apartments and cottages is electric convectors.

Convectors differ, at least, in the way of fastening

Design features

TEN in the convector

When choosing a convector, it is desirable to take into account the design features of the device:

• spiral tape. The simplest yet least effective option. They are inexpensive, heat up quickly, but dry the air, burn oxygen, and are inferior to other types in terms of reliability;
• needle. An advanced model where loops of nichrome filament are embedded in the platinum of the dielectric material. The solution provides fast heating. The reviews are positive, but users note that needle convectors dry the air;
• TEN. The spiral is hidden in a hollow tube, the outer surface is ribbed to speed up air circulation. Such a convector is not afraid of humid air. At the same time, it has a low efficiency, crackles during operation; monolithic. Efficient design where the filament is soldered into the housing. The monolithic heater has a high efficiency, heat exchange, efficiency. Typically, devices are protected from moisture and dust ingress according to the class

Top 2020, where the best models of several segments are presented, is as follows:

9 Royal Clima REC-MP2000E Milano Plus Elettronico

It would seem that the inhabitants of warm Italy can know about heating. However, in this country there are many well-known companies for the production of climate technology. Royal Clima is one of them. Its unique feature lies in the most affordable prices. Yes, the product was released in China, but this does not prevent many companies with a similar approach to production from still inflating the price tag.

Before us is the cheapest electric convector, definitely worthy of attention. It is very economical.With a power consumption of 2 kilowatts, it is able to heat a room of 25 square meters. It has 4 degrees of adjustment, allowing you to set the temperature regime as accurately as possible. Or you can use the electronic system. True, she is not the best here. It is possible to set only the timer and the warm-up level. There is no job programming. But installation is acceptable both wall and floor. Very convenient for cottages with limited space.

Heater electricity consumption calculations

Let's consider the case of a 2000 W convector. To begin with, it is necessary to set the air temperature on such a heater, which the convector must maintain, for example, 25 C. After supplying electricity to the heater, it will work for heating in full power mode, i.e. 2000 W., and in this mode the convector will work up to until (let's say 20 minutes) until the air temperature that was originally set is reached, in our case it is 25C. After that, the temperature control system will work and the supply of electricity to the heating element will stop, which means that the consumption of electricity will stop.

Top 1. Nobo NFK 4S 20

Rating (2020): 4.69

6 reviews from resources are taken into account:

• Nomination

  The simplest organization of the heating system

  The convector is able to work not only autonomously, but also in a chain with other heaters, thereby forming the main or auxiliary heating system.

• Characteristics
  • Average price, rub.: 14 720
  • Country: Norway (produced in Ireland)
  • Heating power, W: 2000
  • Number of modes: no data
  • Mounting: wall
  • Management: mechanical
  • Programming: yes (option)
  • Remote control: no
  • Features: ecoDesign technology, 10 year warranty

The Nobo NFK 4S 20 convector is capable of heating the air in a room of 20–28 sq. m. up to 25 °. It is controlled manually using the complete NCU 1S thermostat, which can be replaced for a fee with a self-programming NCU 2T or with remote programming NCU 1R, NCU 2R, NCU ER. The functionality of the latter includes support for the Orion 700 and Nobo Energy Control systems, due to which it is possible to combine several heaters into a single circuit and control it or a stand-alone convector through any type of PC. According to reviews, the device is easy to use, economical thanks to ecoDesign technology and can be easily installed in an apartment and a small private house or in a country house.

Pros and cons

• 10 year warranty, 30 year resource
• The possibility of replacing the thermostat with a self-programming one
• Narrow and long body: 1125x400x90mm (WxHxD)
• Uniform heating without air drying

Basic thermostat - only with manual control

Comparison of the characteristics of the top 3 participants

Nobo NFK 4S 20	Noirot Bellagio Smart ECOcontrol 2500	Electrolux ECH/R-2500T
Average price, rub.: 14 720	Average price, rub.: 129 860	Average price: 6 058 rubles.
Country: Norway (produced in Ireland)	Country: France	Country: Sweden (made in China)
Heating power, W: 2000	Heating power, W: 2500	Heating power, W: 2500
Number of modes: no data	Number of modes: 1	Number of modes: 3
Mounting: wall	Mounting: wall	Mounting: wall, floor
Management: mechanical	Management: electronic	Management: electronic
Programming: yes (option)	Programming: yes (option)	Programming: yes
Remote control: no	Remote control: yes (option)	Remote control: no
Features: ecoDesign technology, 10 year warranty	Features: Energy Saving Features	Features: LED-display, choice of equipment, parental control

Rating of the best underfloor heating convectors for 2020

with natural circulation

3rd place: Polvax Ke

A worthy sample from the Ukrainian manufacturer. This model is distinguished by a qualitatively manufactured heat exchanger. All materials and components used in the construction have passed international certification

Particular attention is paid to the corrugation of aluminum plates

Name	Index
Manufacturer country	Ukraine
Width in mm	230
Height in mm	90
Length in mm	2000
Heat dissipation in watts	671
Cost, rubles	17500

Polvax Ke
Advantages:

• The small pitch of the fins provides increased heat transfer;
• Applied certified materials;
• Good value for money.

Flaws:

Rarely found on the Russian market.

2nd place: Varmann Ntherm

This model is intended for a point arrangement on the area of ​​the heated room. Thanks to the applied technology, with relatively small dimensions of the convector itself, the maximum effect of heat transfer is achieved. More than democratic price deservedly made this model popular with Russian consumers. The structural elements themselves are made of heavy-duty materials using Italian technology.

Varmann Ntherm

Name	Index
Manufacturer country	Russia
Width in mm	230
Height in mm	90
Length in mm	800
Heat dissipation in watts	205
Cost, rubles	14300

Advantages:

• Use of innovative technologies in the design;
• Democratic price;
• No big difference in temperature.

Flaws:

Not found.

1st place: Carrera S

These convectors are specially designed for equipping premises where it is necessary to create a special microclimate (winter backs, museum halls, closed arboretums). For rooms with high humidity, the design provides a special outlet for accumulating condensate. The standard kit includes a decorative crate of our own production.

Name	Index
Manufacturer country	Italy
Width in mm	230
Height in mm	90
Length in mm	2000
Heat dissipation in watts	642
Cost, rubles	35000

Carrera S
Advantages:

• Special purpose model;
• Used heavy-duty materials;
• There is a drain for condensate;
• The grate is included.

Flaws:

• High price;
• The kit does not include ball hoses, flexible hoses required for connection.

With forced circulation

3rd place: Verano VKN5

This heater can be controlled by sensors installed on the fans (automatic activation of the fans when the temperature falls below a predetermined level). Manual remote control is also possible. Air is taken from both sides of the heating element.

Verano VKN5

Name	Index
Manufacturer country	Poland
Width in mm	280
Height in mm	90
Length in mm	1950
Heat dissipation in watts	4900
Cost, rubles	67000

Advantages:

• Dual air intake path;
• Automatic temperature control;
• Improved thermal efficiency.

Flaws:

Works only with Danfoss original thermostats.

2nd place: Mohlenhoff QSK

A real icon of European quality.In addition to the use of heavy-duty materials, a fan is installed in the design, which meets European noise standards. Connection is possible both from the end of the device and from the side. The warranty for the device is 10 years!

Name	Index
Manufacturer country	Germany
Width in mm	260
Height in mm	90
Length in mm	2000
Heat dissipation in watts	3400
Cost, rubles	96000

Mohlenhoff QSK
Advantages:

• Super quiet windzale;
• Extended warranty period;
• Network connectivity options.

Flaws:

High price.

1st place: Jaga Mini Canal

This heater is the ideal solution for raised floors in apartment buildings. The internal elements of the apparatus are painted in a solid gray metallic color. At the same time, it is possible to choose the top crate in combination with the color of the rest of the flooring. The F-tube heat exchanger used in the system allows you to achieve greater performance with just one fan.

Name	Index
Manufacturer country	Germany
Width in mm	260
Height in mm	90
Length in mm	1900
Heat dissipation in watts	750
Cost, rubles	35000

Jaga Mini Canal
Advantages:

• Innovative design;
• Increased optimal performance;
• Increased heat dissipation.

Flaws:

Overcharge.

Top 2. Noirot Spot E-5 2000

Rating (2020): 4.59

228 reviews from resources taken into account: Yandex.Market, Ozon, Vseinstrumenti

• Characteristics
  • Average price, rub.: 14 990
  • Country: France
  • Heating power, W: 2000
  • Number of modes: 3
  • Mounting: wall
  • Management: electronic
  • Programming: yes
  • Remote control: no
  • Features: frost protection, waterproof case

Noirot Spot E-5 2000 boasts good build quality and a power of 2000 watts, thanks to which it is able to heat a room up to 25 square meters. m. A distinctive feature of this device is the presence of a thermostat that allows you to maintain the temperature automatically at a given level. A convenient frost protection function prevents the room from freezing and premature failure of the convector. In numerous positive reviews, buyers talk about fast heating, ease of operation and quiet operation. In addition, the device has a thickness of only 8 cm, so that when mounted on the wall it will not stand out too much. Among the minuses are a short power cord and the absence of a sleep timer.

Pros and cons

• high power
• Durability, lightness, portability
• energy efficiency

• High price
• The sensor is sensitive to drafts

Unaccounted for electricity costs

air conditioning - summer consumption 100-150 kW / h per month Of course, one more item must be added to the previous calculation, characterizing unforeseen costs. It is not only about using a coffee machine and other small household appliances, without which we can no longer imagine a comfortable life. Depending on the living conditions, a water supply station, a circulation pump in the heating system, electrical equipment of a gas boiler and convector, as well as a water heater, heating boiler, electric stove or oven, welding can be used. The list can be listed for a long time, because in modern life, many home appliances are powered through the mains.

The consumption of electricity in this case "pulls" the electrical appliance in the "standby" mode when the wire is connected to the network.In fact, this is a trifle, but if you calculate the costs for a month, a year ...

oil heater - 150-300 kW / h in winter

Owners of air conditioners are also forced to pay extra for the possibility of a comfortable rest from the hot temperature. In winter, consumption increases due to the use of a gas boiler, convectors and heaters. The electricity consumption of an air conditioner, even with the most minimal use, will cost about 100 - 120 kW per month, which can significantly increase your costs. The power of household heating appliances is also enough to “wind up” the same amount in cold weather, therefore, before buying such equipment, it is necessary to calculate the feasibility of its use.

Which is ultimately more economical and efficient: an electric boiler or convectors

As mentioned earlier, the choice depends on the area of ​​\u200b\u200bthe private house and the model of the electric boiler / convectors.

For a house with an area of ​​40-80 m2, you can safely choose 2-4 convectors with a capacity of 2 kW each, the total cost of the solution will be about 5,500-10,000 rubles. + organization of separate wiring for their power supply, tk. it is simply unsafe to turn on devices of such power for a long time and is fraught with constant overloads.

The minimum costs of organizing heating for many years will cover the high operating costs by 5-20%

With a larger budget, in order to increase efficiency and driving comfort, you can pay attention to the more expensive Noirot, Electrolux, Ballu or Nobo models.

For houses with an area of ​​80-120 m2, the choice is still not obvious, since the total cost of convectors is already closer to the cost of organizing a heating system with an electric boiler and radiators, and the advantages of good electric boilers are already obvious.

For houses with an area of ​​​​120-300 m2 or more, it is better to use an electric boiler. The heating system will be more stable, the savings due to control through an external room thermostat will be extremely noticeable, the connection of a powerful electrical appliance will be carried out at one point, you can easily solve the issue of hot water supply, connect underfloor heating, rationally use the buffer tank.

How to accurately calculate the required boiler outputIndividual calculation, formula and correction factors