Overview of electric convectors with a power of 1.5 kW

What is a heating convector

This is the name of heating devices that heat rooms by convection. If we talk about them in general, then many heat sources with a wide surface fit this description - radiators, registers, and so on. In practice, these are products with one or more tubes through which a coolant or other heat source moves. One of the key structural elements is the pressed-on transverse finning, which is necessary to increase heat transfer.

Device

This type of heating equipment has a rather simple design: it is a metal case with holes, inside of which a heating element and a control unit are installed.The lower holes are used to take in cold air, and the upper ones are used to return the already prepared warm air. Some models may use a special fan that increases the intensity of heating, accelerating air convection.

Now there is a wide variety of heating equipment, which is produced by many world-class brands. Models of a particular company may have certain differences. These are additional functions that facilitate the operation of the device.

Operating principle

Such equipment works on the principle of convection - this is when, during heating, the air begins to mix in the room. Heated air masses expand, their density decreases, as a result of which they are forced out to the ceiling by colder air. When cooled, the density increases, and the mass falls back down. The cycle is repeated until the room is completely warmed up. Today there is a large selection of heating equipment.

To supply heat in the devices, 2 processes are provided:

1. The air in contact with the heating device is heated. This is where the principle of convection comes into play.
2. Heat is transferred by infrared (thermal) radiation. That is, objects and surfaces close to the device, such as furniture or the floor, are first heated, and heat is transferred from them to the surrounding air.

The difference between IR heating is that if you come close to a working device, it will heat the human body. Because of this, it may seem that the room temperature is higher.

Benefits of using

Each type of heater has its strengths and weaknesses.Nowadays, the most in demand are those devices that run on electricity - they are affordable, efficient and reliable.

Advantages of electric heaters:

1. Easy installation. There is no need to lay pipes or cables during installation.
2. Compactness. Many models have a thin and light convection chamber, which allows the production of devices with low weight.
3. Safety. During operation, the body of the device does not heat up above +65 ° C, which makes it in demand in living quarters.
4. High efficiency up to 100%. This efficiency is explained by the fact that almost all the electrical energy the device needs is to heat the air masses. This is what allows you to quickly heat the room.
5. Easy maintenance and operation. Many models have electronic control, so the user can only select the desired heating temperature.
6. Design. All models are characterized by an attractive and discreet appearance, while they do not have sharp corners, which makes them safe.
7. Environmental friendliness. During heating, the air will not overheat, dry out or become polluted.
8. Life time. Products manufactured by reliable manufacturers can work for about 20 years.
9. Profitability. Energy-saving models are now being produced, the design of which includes a thermostat. They automatically turn off after reaching the desired heating point.

With the use of such devices, high-quality space heating can be achieved. But you need to choose the right model, taking into account many characteristics - only this will be the key to optimal efficiency.

Flaws

There are the following disadvantages:

1. Due to the convection air currents in the room, dust is transferred, which is contraindicated for allergy sufferers.
2. In the area of ​​\u200b\u200bthe floor and ceiling, a temperature difference will be noticeable, especially if the room has ceilings above 2.5 m.
3. The device is not particularly effective if the house is poorly insulated.
4. To heat large areas, you will need several devices.

It should also be noted that heaters consume electricity to operate, which entails an increase in utility costs. If a water convector is installed, then certain operational requirements will need to be met: the coolant must be of high quality, and the pressure in the system must be stable.

Budget

The review contains models that can be used as an additional source of heat when the batteries of the central heating system are not warm enough, as well as for work in the off-season in an apartment, in the country, in the office.

They quickly fill the space with heated air, are inexpensive. Experts have identified several successful models:

Edisson Polo 1500M - three operating modes

Edison Polo 1500M is a model powered by electricity, which requires certain safety measures to be observed when using it.

Manual control allows you to adjust the temperature in one of three positions. The convector is installed on legs. Handles are provided for its transportation.

During production, a STITCH heating element is installed. The model is easy to manage. The compact dimensions allow you to move the device between rooms.

Advantages:

• mechanical control;
• overheat protection;
• handles for transportation are included in the package of delivery;
• there is a heating indicator;
• compact;
• can be hung on the wall;
• three modes of operation (1.5, 0.9, 0.6 kW).

Flaws:

• light;
• build quality.

Engy EN-500 mini - compact, efficient

Engy EN-500 mini is a convector designed for heating domestic premises. Can be used in offices. The model is able to warm up a room up to 12 m2, evenly distributing heat throughout the space.

Thanks to the thermostat, Engy EN-500 has flexible power settings and consumes little electricity.

Design features allow you to install on the floor, mount on the wall. Overheating protection is provided for increased safety.

Advantages:

• power - 500 W;
• universal type of fastening;
• overheat protection.

Flaws:

• no power indicator;
• no remote control.

WWQ KS-15 - STITCH element

The WWQ convector of the KS-15 series is a household-level heating device designed for indoor operation. The model works due to the STITCH element, which quickly heats up to the set temperature, which makes it energy efficient.

At the outlet of the system, a warm air stream is obtained, which, due to its high speed, quickly spreads throughout the space. The WWQ KS-15 has a mechanical control with three modes of operation. There is a thermostat that automatically maintains the temperature at a given level.

If the convector temperature reaches critical values, it will automatically turn off. The package includes several types of mounts that allow you to use it as a floor or wall heater.

Advantages:

• heats up quickly;
• good air circulation;
• mechanical control;
• two mounting options.

Flaws:

one mode of operation;

RESANTA OK-500S - easy to use

Electric convector for space heating.The design of the device allows air to pass inside the convector, as a result of which it heats up.

RESANTA OK-500S complies with international standards and is produced using our own developments. The model is adapted to Russian climatic conditions, designed for daily use.

RESANTA OK-500C can be used at home, in the office. This is a safe technique that works silently, does not dry out oxygen, and provides comfort, regardless of the weather conditions outside the window. The scope of delivery includes a bracket for mounting the heater on the wall.

Advantages:

• ease of installation;
• fast heating of the room up to 10 m2;
• high efficiency;
• energy efficiency;
• the body heats up to no more than 60 degrees Celsius.

Flaws:

• the model is not suitable for use in rooms with high humidity;
• low power.

Hyundai H-CH1-1500-UI766 - basic functions

Hyundai H-CH1-1500-UI766 is a model with a simple design, made in black. Convector power - 1500 W with the ability to adjust the power. The device is capable of heating a space up to 15 m2, which is enough for any room in an apartment, private house.

There is a mechanical thermostat that controls the operation of the heater. The simple design of the Hyundai H-CH1-1500-UI766 ensures years of trouble-free operation.

The model has special legs that provide stability. The body of the convector is protected according to IP20 class. There is an overheating protection system. The model has a convenient, simple control system. Hyundai H-CH1-1500-UI766 is powered by the mains.

Advantages:

• powerful;
• heats up quickly
• light.

Flaws:

• short cord;
• flimsy legs;
• the device emits a buzzing sound;
• At the first use, an unpleasant odor may appear.

Rating of electric convectors

The most popular heating devices that consume electrical energy. This is not surprising, since there are quite a few advantages of this type of heaters:

• ensuring the same temperature in all points of the room;
• noiselessness;
• work without accumulation of dust and unpleasant smell;
• during operation, humidity does not decrease, since oxygen is not burned;
• high heating rate;
• energy saving;
• small dimensions;
• ease of use and reliability.

There is no single answer to the question of which electric convector is better. The products of such well-known brands as Noirot, Neoclima, Electrolux, Ballu, Timberk have been tested by many users and time. Therefore, the models of these companies often take first place in the rankings of the best electric convectors. Every day, new manufacturers of microclimate household appliances appear on the market. The cost of the products they offer is slightly less due to the uncertainty, but it is difficult to judge their quality and level of reliability.

Microclimate devices for the home

For a dwelling with an autonomous heating system, in which people are constantly present, convectors select low power, since they serve mainly as additional sources of heat.

Top 5 best electric heating convectors for the home.

Country house heating

When wondering which convector to choose for a summer residence, one should take into account that there is no central heating there and heating is needed only for a few days in the winter or cold autumn-spring period. Therefore, when rating convectors for summer cottages, the main criterion is the selection of high-power equipment, preferably with an anti-freeze function. One kilowatt of device power will be enough only for 10 square meters of heated space.

Five of the best electric convectors for summer cottages

Despite the numerous advantages of electric convectors, their disadvantages are dependence on an uninterrupted supply of electricity and the impossibility of heat storage. Therefore, the ideal option is to use them in combination with other heating methods.

Hosseven HDU-3DK

Main characteristics:

• type - wall;
• power - 2.7 kW;
• heated area - 27 m²;
• Efficiency - 90%;
• heat exchanger - cast iron;
• thermostat - mechanical;
• electric fan - no;
• dimensions (H × W × D) - 635 × 470 × 270 mm;
• weight - 22.8 kg;
• gas consumption - 0.28 m³ / h.

Model description

Modern design combined with optimal power, reliability and high safety performance make it possible to install the Hosseven HDU-3 DK convector in any premises, from country houses and cottages to technical buildings.

Thanks to the heat exchanger with a ribbed surface, the Hosseven HDU-3 DK gas convector is characterized by increased heat dissipation and a quick increase in operating power immediately after start-up. The set temperature in the room is maintained by means of a thermostat integrated into the body of the unit.

The coaxial telescopic pipe along its inner side ensures the removal of combustion products. The air flow is carried out on the outside of the pipe.It is noteworthy that due to the exhaust gases, the air coming from the street is heated, and this has a positive effect on the complete combustion of the fuel.

The devices have a cast-iron combustion chamber, which is reliably isolated from the air in the rooms due to the closed design. For the operation of the burner, air circulation and the removal of combustion products are carried out through a coaxial pipe connected to the reverse side of the convector. As it becomes clear from the description, the convector does not need a traditional chimney. The cast iron combustion chamber has a long service life, which averages 50 years.

The device is produced both as standard for connection to natural gas mains, and can be equipped with parts for connection to a liquefied gas cylinder, which allows heating a room in non-gasified places.

Advantages and disadvantages of the device

First of all, I would like to note the durability of the Hosseven HDU-3 DK convector, which is achieved thanks to the cast-iron heat exchanger. Also, the device is very reliable, because in its design the well-proven Italian fittings SIT are used. The unit is easy to use and is switched on with an electronic ignition powered by a standard AA battery.

Safety

Manufacturers paid special attention to the safety of the heater, which outputs exhaust gases directly to the street. Consumers note the versatility of the units, because they are equipped with adapters for working with liquefied bottled gas, which is convenient for those who plan to connect to the central gas pipeline in the near future

Installation and additional functions

The installation of the Hosseven HDU-3 DK convector is very simple, so you can do it yourself. The advantages include the fact that the device immediately warms up the air in the room, and not the coolant. This allows you to quickly obtain the desired air temperature in the range of 13 - 38 ° C with minimal heat loss (90% efficiency).

The built-in thermostat regulates the room temperature automatically. The compact dimensions allow the convector to be installed in small spaces. It is also very convenient that the device works almost silently and does not need piping, which can freeze in winter.

Flaws

The negative properties of the convector include a significant weight and high cost of the device. Due to the lack of an electric fan, the warm-up speed is lower than for models in the DKV range, in which it is built in.

9 Royal Clima REC-MP2000E Milano Plus Elettronico

It would seem that the inhabitants of warm Italy can know about heating. However, in this country there are many well-known companies for the production of climate technology. Royal Clima is one of them. Its unique feature lies in the most affordable prices. Yes, the product was released in China, but this does not prevent many companies with a similar approach to production from still inflating the price tag.

Before us is the cheapest electric convector, definitely worthy of attention. It is very economical. With a power consumption of 2 kilowatts, it is able to heat a room of 25 square meters. It has 4 degrees of adjustment, allowing you to set the temperature regime as accurately as possible. Or you can use the electronic system. True, she is not the best here. It is possible to set only the timer and the warm-up level. There is no job programming.But installation is acceptable both wall and floor. Very convenient for cottages with limited space.