Best Bath Cleaner: A Ranking of Proven Plumbing Cleaners

Introduction

In order to avoid blockages, it is necessary to take preventive measures in a timely manner

To increase comfort, apartments and private houses are equipped with a system of channels for removing sewage. The process of active operation leads to the fact that various contaminants are deposited on the surface of the pipes from the inside:

• rust (inside)
• calcium precipitate
• sand
• body fat
• soap waste
• hair, animal fur
• other waste of human activity

Unpleasant smell when clogged

The cause of blockage can also be improper pipe installation, for example, an incorrect slope, many turns and connection elements. Such difficult situations usually lead to a complete replacement of the entire system.

It will not be possible to avoid clogging if you do not timely prevent the condition of the sewer system. The use of physical force, simple tools and special cleaning equipment will keep the pipeline networks in working order.

TOP 20 Best children's washing powders: review and recommendations for choosing + Reviews

professional tools

2. Effect for plumbing Alpha 103

In terms of its effectiveness, this product is largely ahead of all previously considered bath surface care products. It almost instantly dissolves rust, removes limescale and mold from surfaces of a very different nature. Despite the fact that the base is subjected to a rather intense impact, the products can be used not only for enameled, but also for acrylic baths. The manufacturer recommends that before direct use, pour this composition into a bottle with a trigger, and then spray the liquid over the entire surface area. The product is a clear green liquid. This spray takes care of the surface itself, well eliminates the causes of unpleasant odors, and has very high whitening qualities. The time of exposure to the contaminated area is from 5 to 15 minutes. After the time has elapsed, the surface is rinsed with warm or cool water.

The liquid does not need to be diluted, since it is already available in a completely ready-to-use form.The products belong to the professional means for the care of plumbing of various kinds - it has long been kept in service by the maids of fashionable hotels not only in our country, but also abroad. The whitening qualities of the products allow you to create the effect of purity. The tool is used by housewives, and employees of restaurant enterprises, preventive sanatoriums, and so on.

Advantages:

• Excellent result at a very reasonable price;
• Effectively cleans, bleaches, disinfects;
• There is no need to make an effort to clean;
• Belongs to the group of professional cleaners.

Flaws:

Not so easy to find in stores.

Effect cleaner for sanitary ware Alfa 101

1. Grohe spray GROHclean Professional

It is unlikely that you will be able to find anything better than this product on the Russian and European markets. This composition is produced by a German company, which is also engaged in the production of sanitary ware of various kinds and from various materials. The tool showed itself perfectly when working with any pollution on any plumbing equipment, regardless of the manufacturer. It almost instantly removes lime deposits from the surface, which can be absorbed over time and cause a significant deterioration in the appearance of the product. This is another professional type product, which is characterized by low consumption and efficient operation. In particular, the tool is able to get rid of lime and soap deposits, stains of a very different nature, grease and dirt. The manufacturer recommends using the composition in the process of cleaning bathrooms, kitchens, metal and faience sanitary ware, ceramic tiles, showers.

Available as a spray, which must be sprayed directly onto the contaminated surface and left for about 10-12 minutes. Then the dirt is removed with a microfiber cloth, and it will need to be pre-moistened in cool water. You should not rub too hard - you can’t expect an effect from this, it’s much better to just repeat the operation if the dirt has not completely removed. The main active ingredient is citric acid, as well as biodegradable surfactants.

Advantages:

• Returns faucets and tiles to their original shine;
• Completely removes even old lime deposits;
• Economic consumption;
• Produced in different volumes;
• Works great on grease and stains.

Flaws:

It is rare and quite expensive.

Grohe spray GROHclean Professional

8 NBT-Siberia "Shining tile"

To eliminate lime and grease deposits from tiles, we recommend using the Shining Tile product from NBT-Siberia. Its most important advantage is the absence of chemical components harmful and dangerous to human life. It is based on natural substances, including chlorine, time-tested. However, the use of gloves when cleaning is still mandatory!

The reviews note the versatility of the tool. They write that it is ideal for cleaning not only tiles, but also plumbing fixtures (sinks, bathtubs, toilets) with chrome surfaces. Keep in mind that the product is very liquid, so applying it with a sponge is not very convenient. If you have a spray bottle, it is best to pour the contents into it. This will make cleaning much faster and more convenient. Pros: low price, large volume (500 ml), versatility.Cons: not suitable for cleaning granite or marble, leaves a specific smell.

How to wash an acrylic bath - tips and tricks

How to wash an acrylic bath so that it does not change its appearance, serves for a long time and pleases the eye with its unsurpassed appearance. In view of the fact that acrylic bathtubs appeared on our market quite recently, many people ask themselves the question - what means to wash such bathtubs and how to properly handle them. There are no big difficulties in the procedure for washing an acrylic bath. The main thing here is to follow the rules of cleaning.

We are all used to bulky and heavy cast iron bathtubs, and acrylic bathtubs, which are elegant in their shape and quite light, at first glance seem fragile and impractical. That is why, many are wary of plumbing, which is made of acrylic.

Features of washing and caring for an acrylic bath

Unfortunately, many do not yet know the basic rules for the care of acrylic. It is worth noting that the surface of an acrylic bathtub requires more careful maintenance and therefore you should familiarize yourself with a number of rules for the care of this material. By following the basic rules for care, you will be able to extend the flawless appearance of your bath.

Acrylic is a durable material. Its surface has a dirt-repellent effect, due to which microorganisms do not develop on it. In addition, the acrylic bathtub is not afraid of impacts, but it is easily scratched.

Features of washing an acrylic bath

The main thing is to be careful and careful when washing an acrylic bath.It is not recommended to use powdered and abrasive products, as well as paste containing chlorine, acid, alkali, and ammonia as a washing agent.

Such substances contribute to the appearance of scratches on the surface, and also lead to the loss of natural color. Always carefully read the ingredients of the cleaning agent you use before cleaning your acrylic bathtub. Do not use metal and hard brushes - such brushes violate the integrity of the acrylic coating.

It is also not recommended to bathe your pets in an acrylic bathtub, put metal basins and buckets in them. Never put various objects in the bathroom - stools, metal basins and objects, as well as any other household utensils.

What improvised means can be used to wash an acrylic bath

To properly care for an acrylic bathtub, you must use a liquid with a cleansing effect as a washing agent. Dishwashing liquid, liquid soap, shower gel, etc. are excellent for this purpose.

If you find lime streaks on the surface of the bathroom, then it is not necessary to wash the entire container completely. It is enough to take a soft cloth, soak it in lemon juice or table vinegar and wipe the surface.

If you notice that some areas of the bathroom surface begin to darken, then it is enough to rinse the container with running water and wipe it with a dry and soft cloth.

If there are minor scratches in the acrylic bath, then its surface can be treated with a polishing material, in particular, it can be ordinary mastic. Furniture polish or car polish is often used for this purpose.

Special products for washing acrylic baths

The current level of development of the chemical industry has made it possible to develop special tools, thanks to which an acrylic bath can retain its original appearance for a long time. At the same time, with such means, any acrylic container is washed quickly and safely. I would especially like to highlight such funds as Acrylan, Cillit, Sarma, Acryl-Net, Star-Acrylat.

These cream-gels are specially designed for washing acrylic surfaces. The agent is applied to a napkin and only after that to the surface of the bath. The entire surface of the container is wiped with a napkin and left for 5 minutes. After 5 minutes, the product should be washed off well with warm water and wiped dry with a cloth.

To wash acrylic bathtubs, you can use universal products. The most popular all-purpose cleaner for acrylic surfaces is Ravak. It was developed using a special technology and is intended for washing acrylic surfaces.

In order to qualitatively get rid of the appearance of rust, it is recommended to use products that are designed to combat rust specifically from acrylic surfaces.

In any case, when choosing a product for washing an acrylic bathtub, always give preference to special products. Such products will not only gently clean the surface, but also give it shine and protection, in the form of a thin waterproof film. Now you already know how to wash the acrylic surface and you can provide it with proper care and increase its service life.

6 UNICUM

The place of honor in the ranking of the best is occupied by the concentrated Unicum product. It is designed to remove stains, as well as for complex cleaning.The drug easily copes with pollution and unpleasant odors, perfectly removes stains and restores brightness to flowers. Feature of the agent in the resulting nanolayer. After use, a film remains on the surface of the furniture, protecting it from the penetration of dirt and dust into the upholstery and facilitating repeated cleaning processes.

Buyers say that the tool is very effective and very economical. It has a pleasant aroma, foams quickly, and the result is not long in coming. One of the reviews says that Unicum coped well with such contaminants as milk, baby food, chocolate, old stains. Due to the good quality characteristics, consumers willingly recommend the product to their friends.

5 NORDLAND

In the middle of the ranking of the best is NORDLAND microactive foam. The tool is universal. Suitable for furniture, car, carpets. The preparation does not damage natural surfaces. It is able to penetrate deep into the fabric and remove contaminants such as: grease, dust, dirt and nicotine. In this case, the color of the upholstery becomes brighter.

Users note that NORDLAND copes with the removal of even old stains of unknown origin. With it, you can clean traces of berries, juices and felt-tip pens. The drug has disadvantages - high consumption and high cost. But, as the reviews say, after receiving such efficiency, it is not a pity for the money spent. The main thing is that NORDLAND provides almost dry cleaning, copes with dirt and eliminates odors with a bang.

Chistin Sanitary Stupino Chemical Plant 750 ml the most budgetary means for washing and disinfecting toilets

Average price in the Russian Federation: 45 rubles.

Despite the maximum budget, the product has a convenient bottle, a spout with a lock and amazing efficiency for such a price. It contains a mixture of acids and a corrosion inhibitor, so it is quite corrosive. It is consumed quickly, because it has a liquid consistency. The manufacturer also has the “Chistina” option in the form of a gel, but it is not so popular with housewives.

Pros:

• very low price;
• perfectly removes dirt, plaque and rust;
• neutral smell.

Minuses:

• liquid, and therefore uneconomical;
• Very small print on the bottle.

Typical reviews about Chistin Sanitary:

“Chistin turned out to be a rather liquid agent, it quickly scatters and flows where it is not needed. Nevertheless, I was very pleased with the result: after 10 minutes, there was no trace of the lime stripes.”

“The best effective remedy for limescale, and almost for a penny. Removes ordinary dirt worse, you need to rub it with a sponge. But, in general, very good!”

Rating of the best toilet cleaners - TOP-10

Name of product	Estimated cost, rub.	Peculiarities	Rating, on a 10-point scale
Cillit Bang Lime and Rust Toilet Gel	250	one of the best toilet cleaners on the market	10
Toilet duck active 5 in 1 gel 900 ml	180	great toilet bowl cleaner in the best packaging	10
Domestos 100% Green/Pink 750 ml	150	the best toilet gel in the ratio "price-quality"	9.8
Comet 7 days clean toilet bowl 750 ml –	150	good solution for removing limescale in the toilet bowl	9.7
AIST Sanoks ultra 750 ml –	60	cheap and effective cleaner	9.6
Sanita Antirust 500 ml	50	best inexpensive rust gel	9.6
Faberlic Toilet bowl cleaner 500 ml	200	good quality toilet cleaner	9.5
Sarma Sarma Gel for sanitary ware 750 ml	80	inexpensive toilet cleaner with a pleasant aroma	9.4
Sanfor universal 10 in 1 500 ml	60	inexpensive gel for cleaning plumbing with chlorine	9.3
Chistin Sanitary Stupino Chemical Plant 750 ml	45	The best budget good tool for washing and disinfecting toilets	8.9

Acrylic Bathtub Cleaner Rating

Acrylic bathtubs are in great demand. This is explained by the fact that the material is hygienic, and the baths are easy to install and practically do not corrode.

However, they require meticulous care and careful handling. Experts do not recommend washing an acrylic bathtub with cleaning products more than a few times every seven days.

After use, such a bath must be thoroughly wiped each time so that not a drop of water remains in it overnight. Such measures will help to avoid the occurrence of plaque.

It is strictly forbidden to care for and keep clean acrylic bathtubs using detergents containing acetone, chlorine, ammonia and other acids, as well as corrosive elements.

Acrylic bath care must be carried out using special detergents, which must be fully consistent with their intended use.

Acrylan

Effective care product for acrylic bathtubs. With its help, various dirt, plaque, rust spots and old marks are easily eliminated. It is also used for disinfection. Mistresses speak of it as a quality product that washes and eliminates all kinds of pollution. After use, a special film is formed on the acrylic surface, which remains for several days and prevents the build-up of plaque and dirt.

Average cost: 348 rubles.

Acrylic for bathtubs

Advantages:

• efficiency of elimination of various contaminants;
• ease of use;
• quick result;
• safety for acrylic surfaces.

Flaws:

• strong chemical aroma;
• relatively high cost.

Domestos without chlorine

The cleaner does a great job with all sorts of dirt. It also helps eliminate limescale and rust without harming the acrylic surface at all.

Average cost: 100 rubles.

Domestos gel without chlorine

Advantages:

• reliability and safety;
• acceptable cost;
• efficiency;
• safety for acrylic surface.

Flaws:

Bass

An excellent option for maintaining an acrylic bathtub is Bass Gel. It is specially designed to remove simple and serious dirt, as well as limescale and rust. The composition works gently and does not damage the top acrylic layer.

Average cost: 540 rubles.

Bass Gel

Advantages:

• does not contain abrasives, aggressive acids and does not damage acrylic;
• removes even strong pollution;
• has a thick consistency.

Flaws:

Team Pro

The product perfectly cleans old stains, eliminates unpleasant odors and forms a protective shell on the surface of the bath. Tim-Profi is an effective and high-quality tool that not only removes both minor and intense pollution, disinfects, removes limescale and rust.

Average cost: 700 rubles.

Tim-Profi for baths

Advantages:

• efficiency;
• environmental friendliness;
• disinfectant effect.

Flaws:

Cinderella

An effective and affordable acrylic bath cleaner that cleans surfaces very effectively.Removes soap scum effortlessly, clears away stone buildup and doesn't create a lot of foam when rinsing. Manufacturers recommend wearing gloves and a special mask when using, as the cleaning agent has a pungent odor.

Average cost: 50 rubles.

Bath Cinderella

Advantages:

• low cost;
• efficiency;
• ease of use.

Flaws:

The best granular pipe cleaners

Granular means are used in difficult cases. They are distinguished by a high concentration of active substances and at the same time are easy to use.

Grupa Inco Ludwik "Hydraulic" - an economical tool

5

★★★★★
editorial score

97%
buyers recommend this product

"Hydraulic" - effective granules for removing complex blockages. They are sold in plastic bottles of 500 ml. The screw-on lid reliably protects the product from dust and moisture. The wide neck and well-designed handle on the bottle make it easy to pour the product into the drain hole.

To eliminate the blockage, a small amount of granules is enough, so the packaging lasts for a long time. For maximum effectiveness, it is recommended to fill the product with hot water. After use, there is no unpleasant smell left in the room, which is especially valuable when working in poorly ventilated sanitary rooms.

Pros:

• copes with complex blockages;
• convenient packaging;
• removes odors;
• economical.

Minuses:

• toxic composition;
• hard to find in stores.

The high efficiency of the "Hydraulic" granules is ensured by the increased content of active substances and, alas, by the toxicity of the agent. Therefore, when using it, it is necessary to strictly observe safety precautions.

Mole Tornado - active granules

5

★★★★★
editorial score

95%
buyers recommend this product

Mole Tornado is a granular pipe cleaner that tackles grease, hair plugs, and food debris. It is suitable for all types of pipes and does not corrode their walls.

To use, you need to pour the granules into the drain hole and pour warm water. For complex traffic jams, it is recommended to repeat the procedure. For the reagent to fully act, you need at least 1.5 hours. Granules are sold in tight plastic bags of 90 g. This amount is enough for 1 application.

Pros:

• low price (25 rubles per bag);
• found in most households;
• convenient packing;
• no smell;
• suitable for all pipes.

Minuses:

• can spoil the details of plumbing made of enamel or stainless steel;
• works for a long time.

Despite the fact that the product does not have a pungent odor, Mole Tornado must be used carefully. The dust flying from the pellets can cause allergies or irritation of the respiratory tract.

Bagi Professional Products "Shumanit" - against difficult blockages

5

★★★★★
editorial score

93%
buyers recommend this product

Shumanit granules cope even with complex traffic jams, consisting of soap and grease deposits, hair and food residues. For the action of the reagent, 5-7 minutes are enough. The product removes bacteria and unpleasant odors from pipes. This efficiency is due to the addition of a complexing agent, which is responsible for loosening dense plugs of organic and inorganic origin.

Pros:

• sold almost everywhere;
• copes with most blockages;
• acts quickly;
• eliminates bacteria and odors.

Minuses:

• high price (from 90 rubles per 70 g);
• an unpleasant odor remains in the room for an hour.

Bagi "Shumanite" due to its pungent odor can only be used in well-ventilated areas and requires strict adherence to safety regulations.

Means for effective cleaning of cast iron bathtubs

A cast iron bath often has a lightly colored top layer and is particularly durable. However, this characteristic does not mean that it is better able to resist plaque or the formation of small dirty spots.

This type of bathtub requires quality care, so it is important to choose a cleaning agent for this type of bathtub.

Cif Cream

Probably the best cast iron bath cleaner on the market today. Cream "sif" will allow you to clean as carefully as possible not only the surface of the bath, but also the tiles or tiles on the floor of your bathroom. A feature of this tool is that it includes special small granules, which are surrounded by a small number of bubbles. This unique formula allows the substance to dissolve better when in contact with water and activate its properties faster. Even the most corrosive and complex stains such a tool can literally neutralize before your eyes.

If you regularly use only this cream, then soon your bath will become even whiter than it was before, since bleaching elements are included in this product.

Pros:

• cleans the contaminated surface of the bath in the shortest possible time and at the same time you do not need to make the maximum of your efforts;
• a fairly powerful formula allows you to clean even the most corrosive and stubborn stains;
• during the cleaning process, you can not worry that the surface of your bath will be damaged;
• this tool is very convenient to apply to the surface of the bath, so you do not have to fiddle for a long time in order to find the ideal proportions for combining this substance and water;
• the cream is able to remove stains of any complexity;
• after you have cleaned your bath, you will be able to feel a pleasant aroma that will fill your entire bathroom, and during the cleaning process will not irritate your senses;
• very affordable price for half a liter of substance.

Minuses:

Pretty small amount in one jar.

Comet gel

If you are dealing specifically with a cast-iron bath, then you must definitely use either substances that are available in the form of a cream or in the form of a gel. The third, as a rule, is not given, since any other forms, such as powders, can only harm the surface of your bath during the cleaning process. Comet gel has been heavily advertised on a large number of television screens recently, but this by no means means that its effectiveness is greatly exaggerated. On the contrary, this tool is able to very quickly clean all the stains and excess plaque from your bath.

As manufacturers advise, in order for the product to demonstrate its best properties, it is necessary to apply it to the surface of your bath and leave it for a while. The most optimal - for 10-15 minutes. And then rinse thoroughly with a sponge. This way you won't spend too much time cleaning your bathroom properly. In addition, this gel can be used on tiles and tiles, so you get several in one product at once.

Pros:

• is able to remove all the most complex contaminants, and also penetrates into the most inaccessible places in order to properly rinse the space there;
• in its composition, this tool does not have any aggressive elements, so you can not worry if it gets a little on the skin of your hands, since it is practically not capable of causing irritation;
• during the cleaning process, you can not worry that this product will scratch or otherwise damage your bath;
• in addition to cleansing properties, this gel also contains disinfectant elements;
• after you have cleaned the surface of your bath from excess contaminants, this substance creates a special protective film that will maintain this state of your bath for a long period of time;
• after several applications, you can see how your bathroom has become an order of magnitude whiter, and this all happens thanks to the special bleaching agents included in this composition;
• the standard volume is half a liter.

Minuses:

Not everyone likes the smell that remains after cleaning.