Inertial radiators Termor
Thermor inertial electric heating radiators look like ordinary metal batteries. Heating elements are located inside the panels. The body is made of steel or cast iron.
The principle of operation of Thermor inertial wall heating panels is generally similar to water heating systems, only an electric heating element is used as a heat source.
Models are presented in five modifications: Mozart, Pallas, Ovation, Bilbao, Equateur. The main difference between the series is the case design and the material of the heating element used.
Thermor inertial heaters have a built-in electronic control unit. The thermostat is set using the Pass Program system.
Why buy French heating appliances from Thermor
First of all, when choosing a heating device, the buyer is guided by the following criteria: safety, efficiency, ease of operation, ease of installation and operating conditions.
Safety
All heaters, without exception, are equipped with double insulation and a moisture-proof housing. During operation, the device does not dry the air. Electric shock is excluded.
Economy
Modifications have a built-in thermostat: mechanical or electronic. As a result, the efficiency of the device increases by 10-20%. The special design of the devices allows for uniform distribution of heat in the room.
Ease of control and ease of operation
The installation of Thermor infrared radiators, as well as electric convectors, is carried out using special brackets, provided in the kit. You can connect the device through an outlet or power cable.
The temperature is set automatically, just select the required heating mode. The devices operate in fully automatic mode.
Thermor is the best option for those who, above all, value convenience, safety and reliability. To these advantages, it is worth adding the beautiful appearance of climate technology, as well as high efficiency, proven in practice.
Main lineups
If you think that Thermor is a newcomer to the heating market, then you are deeply mistaken. This French brand appeared back in 1931, and 8 years later, the first electric convectors went on sale. Thus, the manufacturer has accumulated enough experience to produce simple and reliable equipment for organizing autonomous heating systems.
Choice today consumers are produced four model ranges:
- Evidence mechanical;
- Vivalto;
- Variations de Silhouette;
- Evidence electronic.
Thermor devices are distinguished by their speed and safety for others. Let's talk about these lineups and find out their distinctive features.
Evidence mechanical
Already by the name alone, you can guess that we have mechanically controlled electric convectors, characterized by their simplicity and reliability. Units from this model range are available in two versions - these are standard and plinth models. They are finished in durable white enamel and have silent aluminum heating elements at their heart. Other features of the series:
- Double electrical isolation;
- Overheat protection;
- Child protection;
- rounded cases;
- Wall and floor mounting;
- Electrical connection without plug and socket;
- Temperature control accuracy is up to 0.8 degrees.
The power of the model range varies from 0.5 to 2.5 kW.
Vivalto
This series combines simplicity and elegant appearance. Vivaldo will become the optimal equipment not only for residential buildings, but also for commercial premises. Inside them we will find hardy heating elements with aluminum fins and mechanical thermostats. During heating, the equipment does not click or crack, which is a big plus. The control elements are located in the upper part of the cases and are completely invisible from the side. The power of heaters varies from 0.5 to 2 kW.
Variations de Silhouette
Behind such a confusing and unpronounceable French name, Thermor electric convectors with advanced electronic control are hidden. They are made in four versions - low, high, standard and plinth. Moreover, all four options are extremely compact.The main differences of the line:
- Precise electronic thermostats;
- Several working modes;
- Antifreeze mode;
- Ability to work on the program;
- Hulls protected from moisture;
- Child protection;
- Complete silence.
The power of the equipment varies from 0.5 to 2 kW.
Due to the presence of moisture-proof housings, Variations de Silhouette can be used in wet rooms.
Evidence
Electric convectors Thermor Evidence electronic is a line of heaters with electronic thermostats that provide precise temperature control. The equipment can work according to the program; several basic operating modes are implemented on board. It is also characterized by a uniform distribution of heat throughout the heated rooms. Each electric convector includes protection against children and an automatic shutdown system in case of overheating. The power of the units is from 0.5 to 2 kW.
What are Thermor convectors
French Thermor electric convectors work on the principle of natural convection. The essence of the method is that the air flows in the room are in constant motion. Heated air masses rise. Cooled air sinks down.
The convector type heater consists of the following elements:
- Special housing - it has convection holes for air circulation. The grilles of the electric convector are made in such a way as to direct the heated air and evenly distribute it inside the room. It is quite possible to heat a house with a Thermor convector, subject to the right choice of power.
The heating element has an external protection, so the air passing through it does not dry out during the operation of the heater. The latest models of heaters use an X-shaped heating element, which increases the efficiency of the heating system.
Control equipment - models are equipped with a mechanical thermostat and electronic control.
Type of installation – the company manufactures Thermor wall-mounted heating electric convectors. Models are easily fixed on the wall with the help of special fasteners. In addition, legs for the convector are provided, allowing you to rearrange the device to any place in the room.
The Thermor wall-mounted electric convector is presented in modifications, the main difference of which is the principle of control and operation.
Mechanical convectors
The line includes two electric convectors: Evidence and Vivalto. Each has its own thermal differences.
-
Evidence with mechanical control - the model is distinguished by a multi-level security system. Sensors are used that block the operation of the device in case of overheating, capsizing, double insulation. There are no sharp corners in the case, the power button is blocked. With a small size, Evidence has high performance indicators.
Vivalto - maximum performance 2 kW. White color. Closed type heating element with aluminum fins. Temperature conditions are set using a mechanical thermostat located in the upper part of the case. Deviations from the set temperature are allowed no more than 1%. When installing Vivalto, no grounding is required.
Electronic convectors
The technical characteristics of Thermor electric convectors - efficiency and autonomy of work have been significantly improved, thanks to equipment with a built-in electronic thermostat.
The line includes two models:
-
Variations de Silhouette - a feature of the modification is the ability to choose equipment of suitable overall dimensions among high, standard, low and baseboard heaters. Traditionally, a closed heating element is used. There are several heating modes: Comfort, Eco, Anti-freeze. Variations de Silhouette is controlled using an LED display. Productivity from 500 to 2000 W.
Evidence with electronic thermostat - the control unit allows you to combine convectors into a single network. The control is carried out by means of a controlling electric convector. The model can be connected to a household plug or directly to the electrical panel, through an automatic machine. As in the model with a mechanical regulator, there is a multi-level security system that allows you to connect the Evidence heater without using grounding. The series has a waterproof case.
The recommended placement height of the Thermor electric convector is 10-15 cm from the floor. This distance provides the best conditions for unobstructed air convection and increases the efficiency of the device.
