Water heating convectors Licon

Licon-convectors: types, features

In addition to traditional Licon Clasic heating radiators, the company produces Licon convectors. The devices have the following features:

• The room in which Licon convectors are installed heats up faster, they require less water as a heat carrier. The amount of coolant (1.5 liters) contributes to a quick response to temperature changes in the room.
• Unlike traditional radiators, the temperature on the inner surface reaches 90 degrees Celsius, on the outer surface of the Likon convectors it does not exceed 40 degrees.
• The use of convectors "Likon" is economically beneficial, a small amount of water requires minimal electricity costs (energy consumption - 0.143 kWh).
• Light weight facilitates installation (on average - 16 kilograms).
• The manufacturer on the official Licon website confirms a ten-year warranty.
• Licon produces convectors in three versions with different modifications:
• floor;
• intrafloor;
• wall.

All models are equipped with thermostats: mechanical (remote, built-in) or electronic, differing in the accuracy of adjustment. For mechanical devices, the temperature is regulated with an accuracy of 1-2 degrees, and for electronic devices - 0.1 degrees. Convectors with mechanical thermostats are cheaper than analogues equipped with electronic devices and they are not dangerous for power surges.

• Floor convector with fan (PKOC, PKIOC, PKWOC). It has excellent heat dissipation, it is rational to use it in rooms with significant heat losses (lobbies, corridors). Dimensions from 90 x 160 x 800 to 450 x 420 x 3000 millimeters.
• Bench convector with fan (OLOC), power 473-4 733 watts, standard length and width 18.24 centimeters.
• Wall convector with fan (OKIOC) – productive, effective in cold climates. Heater power 266-2 735 watts.
• Licon PK floor convectors operate on the principle of natural convection. Used in dry areas.
• Facade convector FK.

Other models are also available, information about them is on the official website of Licon.

The standard delivery of Licon convectors, according to the official website, includes:

• convector (plus heat exchanger, lamellas and purge valve);
• box (painted with black paint, galvanized, stainless steel);
• anodized frame;
• fixing anchors;
• hoses (flexible);
• sololite panels;
• mounting bolts;
• instructions.

Depending on the material of the box, color and heat exchanger, models are distinguished:

• Economic - steel; box cover - black, lacquered; heat exchanger - not painted;
• Exclusive - steel, black lacquer paint;
• InPool (wet environment) - stainless steel, unpainted heat exchanger;
• Inox (dry environment) - stainless steel, the heat exchanger is not painted.

At objects that are subject to increased aesthetic requirements, equipped with stained-glass windows, French balconies, it is advisable to install floor convectors, characterized by:

• temperature indicators - 110 degrees Celsius (maximum);
• 1.2 MPa (maximum pressure);
• 87-410 Watts (power).

In accordance with the interior of the room, a decorative grille made of aluminum or steel is installed at the floor level. Decorative grilles Licon are presented in various versions, so everyone can choose the right model.

Floor convector licon

Floor convector iTermic ITF.500.250.2800 (15702 W)

Convector wall or floor Techno Vita KPZ 185-1.

Floor convector Varmann MiniKon Standard SFV 135.13.

Convector wall or floor Techno Vita KPZ 85-18.

Floor convector Varmann MiniKon Comfort KFV 135.130.

Convector wall or floor Techno Vita KPZ 185-2.

Electric floor convector RESANTA OK-2000

Convector floor Hardware esthete mini 230x130x1.

Floor convector iTermic ITF.80.900.250 height 80 mm.

Floor gas convector Hosseven HDU-3V Fan for a score.

Convector wall or floor Techno Vita KPZ 185-1.

Floor convector KZTO Breeze 200x80x1500 with bars.

Floor electric convector RESANTA OK-1000

Floor convector MiniKon MSFV 85.80.600

Floor convector KZTO Breeze 260x80x2200

Floor convector iTermic ITF.080.200.1600 (1811 W)

Floor convector Techno Usual KVZ 250-105-1.

Convector wall or floor Techno Vita KPZ 85-25.

Floor convector iTermic ITTB.090.250.1500 (2403.

Convector Techno Vent KVZV 420-105-3 built into the floor.

Built-in convector KZTO Breeze 300x80x2200 room

KZTO Convector Breeze-V 120 x 260 x 5000

Floor convector Royal Clima REC-MPE2000M electrical

Floor convector iTermic ITF.080.200.1600 (1811 W)

Floor convector (built into the floor) KZTO Breeze.

Electric floor convector RESANTA OK-1600

Russian convector KZTO Breeze 200x80x2200 room

KZTO Briz-M (200x80x1000) floor convectors

Floor convector Elegant Mini 130x130x2000 with 2 copper.

KZTO Convector without fan breeze 200x80x2200

Convector Electrolux Ech/as -1000 er

Long convector KZTO Breeze 200x80x3000 room

Floor convector iTermic ITF.200.1500.80 height 200.

KZTO Briz-M (200x80x800) floor convectors

Radiator tubular aluminum KZTO Elegant-mini 1 130x80.

Floor convector Oasis Kpo-20

Convector Hyundai H-hv15-10-ui617

KZTO Convector Breeze-M 120 x 200 x 1500

Copper convector KZTO Breeze 300x80x2000 lamellar

KZTO Floor convector Elegant mini 180.130.800 (3 units)

Floor convector KZTO Breeze 260x80x1800

Convector Delsot EVUB-1.0 LUX

Electrolux ECH/AS-1000MR convector

Convector Techno Power KVZ 300-105-1 built into the floor.

Floor convector iTermic ITF.500.2000.80 height 500.

Convector KZTO Effect 1-80-7 Conc

Convector Techno Vent KVZV 250-105-1 built into the floor.

Convector KZTO Effect A 2-240-18 Conc

Floor convector type KZTO Breeze V 240x85x2200 m.

Convector floor Hardware esthete mini 230x130x2.

Floor convector Oasis Kpo-20

Floor convector KZTO Breeze 300x80x2500

Electric convector Royal Clima REC-MP2000M d.

KZTO Briz-M (380x120x1800) built-in convectors

Floor convector iTermic ITF.080.130. 500 (351W)

Household heater NeoClima Convector Comforte T1.5 E.

Radiator tubular aluminum KZTO Elegant-mini 2 130x130.

Convector KZTO Effect A 1-240-33 Conc

Convector Oasis KPO-20

Convector Delsot EVUB-2.0 LUX

Convector Ballu BEC/EZMR-2000

Convector Techno Power KVZ 300-105-1 built into the floor.

Russian convector KZTO Breeze 200x80x2200 room

Floor convector iTermic ITF.500.2000.130 height 500.

Convector KZTO Elegant mini 130x80x2200 1to nv

Floor convector (built into the floor) Techno Usu.

Radiator tubular aluminum KZTO Elegant-mini 2 130x130.

Floor convector water Varmann MiniKon comfort MKF.

Convector KZTO Effect 2-80-12 Conc

Floor convector iTermic ITF.400.350.2800 (17592 W)

Convector Ballu BEC/EZMR-1500

Convector RESANT OK-2000

Floor convector iTermic ITF.080.130.2400 (1677 W)

Floor convector water Varmann MiniKon comfort MKF.

Floor convector (built into the floor) with a fan.

Heater RoyalClima REC-MP2000M Milano Plus

Why do we recommend the installation of water heating floor convectors?

This type of heating equipment is different:

Economy. Floor convectors do not depend on electricity. Innovative fan-equipped appliances don't even need to be connected to an isolating transformer to run 12V motors. Their design provides for the generation of sufficient electricity from the warm water supplied to them through the PTG system.
Fire safety. Not a single fire inspector will have the slightest complaint about a floor convector for water heating. The devices do not pose a fire hazard and do not contain toxic materials.
Ability to connect to a single control scheme. Connect all radiators to a common system so that the owner of the house can control it from one remote control: turn it on and off, adjust the temperature.
air quality

Relative humidity remains comfortable for humans, which is very important, especially for people with reduced immunity and children.

Floor convectors of heating from the Grostal company are reliably protected from corrosion. Their housings and heat exchangers are made of aluminum and copper - metals that are resistant to corrosion and rust. Heating equipment withstands pressure up to 12 atmospheres without deformation and malfunctions. This allows you to successfully connect it and use it in central heating for many years.

Also floor heating convectors:

• Various in color and size. Managers of the Grostal store will assist in the selection of floor convectors that match the style and area of ​​the room.We will take into account the style of the rooms, suggest the best places for the location of convectors and tell you about the appropriate scenario for their use.
• Reliable and durable. The warranty period set by the manufacturer is 7 years. Practice shows that convectors can easily serve their owner for up to 10 years.

Floor convectors have only one drawback. Due to their laconic strict form, they fit into a limited number of interior styles. Heaters of this type are suitable for installation under large windows or in niches:

• Cottages and apartments, the interior of which is made in a classic style, hi-tech and minimalism styles.
• Shop windows.
• Trading rooms.
• Bank and office buildings: corridors, halls and offices,
• Kindergartens, schools, institutions of additional education,
• Polyclinics and hospitals.
• Any other public space.

It is difficult to imagine floor convectors in an elegant room, the design of which was inspired by retro motifs. Floor convectors will not find their application in restaurants or hotels, the halls and halls of which are often decorated in a majestic and deliberately rich style. If you are the owner of such an institution and still decide to install floor convectors, then take care of the decorative design of heating structures, using niches in the walls, gratings and other accessories for installation, the purpose of which we will tell you before making a purchase.

Place an order for Minib, Kermi, Arbonia floor convectors directly on our website by adding your purchases to the basket and filling out the form.Within an hour after receiving the application, we will contact you to clarify the desired delivery time and advise on the payment method.

Bench floor convectors Licon OLN/D | OLNB/D

For heating and relaxation? Yes. Sit back, rest, relax, or just wait. for convectors with a top panel made of solid oak, beech or artificial stone, the load is no problem. You will appreciate the proven and well-thought-out combination of design, power and useful properties not only in apartments, but also in public spaces.

The Licon OLN/D convector has been designed for installation in recreational areas. The bench convector is equipped with a closing panel that can easily withstand static loads, so you can sit on the convector

Attention! The panel is ordered separately. The panels installed on the convector are attached to the convector structure. The Licon OLN/D convector is perfect, for example, for a hall or a winter garden

to install the convector in a swimming pool, it is recommended to order a model made entirely of stainless steel, i.e. provided for the pool

The Licon OLN/D convector is perfect, for example, for a hall or a winter garden. to install the convector in a swimming pool, it is recommended to order a model made entirely of stainless steel, i.e. provided for the pool.

• for natural convection
• wide range of models and designs
• ease of maintenance and cleaning

floor convector body height (mm)	290
width (mm)	260
length (mm)	1000, 1200, 1400, 1600, 1800, 2000
bench length with panel (mm)	1060, 1260, 1460, 1660, 1860, 2060
Power, W)	from 1369 to 2902
Max. working pressure (MPa)	1,2
Max. working temperature	110°C
Max. surface temperature	40°C
connecting thread	internal G 1/2“
connection method	bottom connection recommended, side connection possible
closing panel option	stone imitation (terrazzo), wood – beech, oak

• Economic model (OLN/D) • sheet steel casing painted in white RAL 9010 lacquer
• Model InPool (OLNB/D) • housing in AISI 316 chemical stainless steel lacquered in white RAL 9010, model suitable for humid environments

• sheet steel casing painted white RAL 9010
• Al/Cu heat exchanger with low water content, purge valve and uniquely shaped fins for higher heat output
• the kit is securely packed, contains installation instructions

• bottom connection kit, consisting of a thermostatic valve with a Licon/Danfoss thermostatic head, including extension piece
• closing panels made of material imitating stone (terrazzo) or wood – beech, oak
• when ordering more than 5 pcs. you can choose a different color shade from the RAL color chart (changes should be consulted with the manufacturer)
• convectors are made entirely of stainless steel, which makes them suitable for use in humid environments, such as swimming pools, the body is made of stainless steel AISI 316 and varnished in RAL 9010
• for installation in the pool, the convector must be equipped with a stone panel (terrazzo)

Model	Height (cm)	Order code	100	140	180	OLN/D	26	29	economic	OL-□□□/D	456,02	505,85	555,17	590,73	658,63	724,52
InPool	OLB-□□□/D	683,98	758,78	832,7	886,02	987,97	1086,76
Thermal power (W), 90/70/20°C	1754	2148	2541	2935	3328	3720
bench	30	3	Wood	Beech	135,19	160,75	181,22	211,89	237,25	262,8
Wood	Oak	148,74	176,78	199,45	233,03	261,04	289,05
Teraco	Teraco	140,19	154,36	96,86*	106,41*	117,5*	127,05*

* For convectors with a length of 140, 160, 180, 200 cm, the Terrazzo panel consists of 2 pcs. The price list shows the price for 1 piece.

Installation of floor convectors "Likon"

The design features of floor convectors require the installation of their lower part in a recess provided in the screed. Given that the floor surface may be uneven, bolts are included to help level the equipment relative to the floor plane.

Licon heating systems are an excellent solution for any type of premises, only the price can be attributed to the disadvantages of Licon convectors. So, the cost of Licon PK starts from 15,000 rubles, while the floor convector of a domestic manufacturer costs 2 times cheaper, in fact, it is not inferior in quality, heat transfer, power and design.

The Moscow Radiator Plant presents high-quality and inexpensive products. Cooperation is beneficial for large construction companies, specialized trade organizations, public organizations, offices. Interested customers will receive information about floor convectors of a domestic manufacturer on our website.

Water heating convectors Licon

Here you will learn:

Water heating allows you to heat buildings of any purpose, and the efficiency of the system consists of the correct selection of the boiler, radiators and other equipment. For example, if we use Licon convectors here, we will have at our disposal reliable and durable heating that pleases us with warmth. Let's see what the heaters from this brand are.

The main types of Licon convectors

The Licon trademark has been known in Russia since 2011 - it was in this year that the official representative office of this brand was opened in the Russian Federation. It cannot be said that the manufacturer is very famous, but he makes good heating equipment. Today, Licon convectors are used for heating residential buildings, commercial premises and industrial buildings. The choice of consumers are available:

• Floor models - for installation in rooms with panoramic windows;
• Licon floor convectors are small-sized devices in interesting form factors;
• Wall convectors - heaters with an interesting design;
• Special Licon convectors are devices designed to solve non-standard tasks.

Here is a brief description of all the lines produced.

Floor convectors Licon

By releasing underfloor convector heaters, the manufacturer offers consumers two solutions at once - these are devices with natural and forced convection. They are used in residential areas with panoramic glazing, in cinemas, in hotels and shops, as well as in many other buildings where a hidden heating system needs to be installed.

Models with natural convection have a power of 87 to 4100 W, and their length is up to three meters. They are available in painted or unpainted form, which determines the scope of their use - unpainted modifications in stainless steel boxes are oriented to use in wet areas. There is also a wide range of Licon floor convectors with forced convection, which are characterized by high efficiency and almost silent operation.

Floor convectors Licon

Small-sized convectors Likon floor type is an excellent solution for rooms with large windows and low window sills. They are mounted directly on the floors and connected to the heating mains. Consumers can choose from several model lines with aluminum gratings, galvanized steel or stainless steel. Power - up to 5 kW, convection type - forced or natural.

Licon floor convectors include a very interesting model line, which presents models in the form of small benches. Their upper surfaces, which are seats, are made of wood or artificial stone. You can safely sit on such benches - they are designed taking into account possible loads.

Wall convectors Licon

The manufacturer has done everything possible to give customers efficient and safe space heaters for any purpose. Advantages and features of wall models:

• Natural or artificial convection;
• Power - up to 2.6 kW;
• Low outer surface temperature;
• Expressive design;
• Small dimensions;
• The presence of modifications with various options for processing the casing.

Some models can be used in wet rooms.

Special convectors Licon

This category includes Licon facade convectors and heating registers. Facade models are small-sized units mounted on the facades of buildings with a large glazing area. They perform three functions at once - they heat the premises, prevent the penetration of cold, protect against the formation of condensate.The units are available in several finishes and colors.

Heating registers are frameless heat exchangers designed to be built into various niches and structures. They are designed to solve very narrow tasks, when it is simply impossible to apply the classic options in traditional casings.

Types of steel radiators Licon Classic

The production of Licon steel radiators is designated by 2 types:

• heating radiators Licon Clasic C, equipped with lateral connection with profiled panels responsible for heat transfer;
• radiators Licon Clasic V, produced with internal connecting leads, lower right outlet, valve.

Steel radiators Licon Clasic are considered the main ones in the production program. Steel panel radiator Licon Clasic is equipped with left and right side connections.

On the official website, Clasic radiators are represented by LCC and LCV models.

Heating radiators Licon Clasic C and V are equipped in heating systems using natural and forced circulation of the heat carrier. Prices for Licon radiators depend on their dimensions, types and method of connection. The price of Licon Clasic with a bottom connection is actually 2 times higher than the cost of Licon Clasic with a side connection (with the same standard sizes). Prices for Licon radiators include:

• the cost of a kit for mounting the battery to the wall;
• air vent;
• plugs.

Licon | Manufacturer of heating radiators

ROSPARTNER LLC is the official dealer of Likon Rus LLC throughout the North-West.This partner status grants the right to conduct technical and commercial negotiations on Licon products, conclude deals and sell Licon heating appliances. The dealer certificate allows you to conduct a flexible trade policy: wholesale Licon convectors and radiators at competitive prices.

Assortment

The model range of radiators and convectors for heating systems under the Licon brand is distinguished by a functional variety of options: stationary floor, wall, recessed, floor and bench types. In general, Licon panel radiators, which are connected to the complex heating system of a building or structure, account for a significant share of the manufactured products. Their application is everywhere: in apartments, private houses, office buildings, business centers, restaurants, hotels. The catalog "RosPartner" presents a wide selection of heating devices of different types and sizes. Here you can also find the necessary related products: tools for radiators and radiator fittings.

Benefits of Licon radiators

Consumer preferences for convectors of the Czech brand Licon are explained by several factors:

• rapid heating of the room to the optimum temperature;

prompt response to changes in the microclimate in the room;
maintaining a favorable temperature;
uniform distribution of heat;
low water content in the radiator;
saving water and electricity consumption;
light weight construction.

A distinctive feature of Licon heating convectors is a small amount of water, which contributes to the rapid build-up of temperature in the room and to minimize heat loss.So, to heat a medium-sized private house, no more than 70 liters of water will be required. In addition, Likon radiators are absolutely safe for children: if the temperature of the water in the radiator is at around 90°C, the temperature of the outer panel of the convector will not exceed 40°C.

Consumer confidence in Licon heating devices is also due to the long warranty period from the manufacturer - 10 years for the tightness of the heat exchanger!

The Licon brand is 40 years old

Licon heating convectors are produced by Licon Heat s.r.o. in the Czech Republic. The concern borrowed the experience of manufacturing radiators from Likov Liberec and organically brought it into its own 40-year history of manufacturing convectors.

In 2009, Licon opened a modernized innovative production facility in Liberec. The factory site is 2,400 sq. meters, warehouses occupy another 1,000 m2. Today, Licon is a modern, consolidated and high-tech company, focused on a progressive trade policy and in accordance with the observance of the ISO 9001:2008 standard system.

The main competitive advantage of the Licon brand is a highly technological and environmentally friendly level of production. Most of the operations take place on CNC machines, and when processing surfaces, epoxy-polyester powder paints are applied.

About 10 million CZK were invested in the modernization of the Licon production in 2009. The Likon radiator sales market includes about 25 European and Asian countries. At the same time, exports of products account for more than half of the total sales volume.