Eva convectors for water heating systems

Features of convectors "Eva"

If we compare convectors manufactured by Eva with similar products of competitors, then domestic devices compare favorably with a number of parameters.

The following characteristic advantages are distinguished:

1. Adaptation to Russian conditions. Produced convectors have proven themselves perfectly when working in domestic central heating systems. They withstand a working pressure of 16 atm., Therefore, they are suitable for apartment buildings. Easy installation is provided by adjusting bolts.
2. A wide range of. Thanks to a large selection, you can choose a device for heating rooms of any size: from residential buildings to large shopping pavilions.
3. Manufacturer's warranty. Offered for 10 years.
4. Low noise level. The devices are equipped with safe and silent German fans (up to 22 dB), so the devices can be installed even in bedrooms and children's rooms.The convector in the working state practically does not make noise, so it will not be distracting.
5. High quality decorative grilles. They are able to withstand a load of 120 kg. Built-in convectors are always covered with bars from above for safety reasons. This decorative element also serves as a decoration for heating equipment. For the manufacture of gratings, decorative or anodized aluminum and precious woods (most often oak) are used. Lattices of lattices connect by means of corrosion-proof springs.
6. Fast production times. For the manufacture of one device, a working week is enough, that is, 5-7 days.
7. Modern technologies. Allow to produce high-quality and reliable products with many functions.
8. Compliance with European standards. The manufactured devices are certified, which indicates their safety. During production, each stage is strictly controlled.

As you can see, domestic products have many advantages. Not every company is able to offer such conditions, not to mention the high quality of equipment. This is what ensures the loyalty of customers in relation to the company "Eva".

Selection Guide

Before buying a suitable convector model, you should pay attention to some things

Be sure to consider the area of ​​\u200b\u200bthe room for which the device is intended, because some models can only heat small rooms, and some samples are specially designed for heating large buildings. When choosing a convector, expect that there should be at least 100–120 W of thermal energy per 1–2 square meters of area

And also consider whether there are additional heat sources in the room, in this case, you need to sum up all the heat transfer indicators from all devices.
The dimensions of the equipment also need to be taken into account. The optimal depth for this technique is 90–110 mm

But in some new buildings, the depth of the floor screed does not make it possible to install such a heater. In this case, it is better to give preference to models with values ​​​​of 70 or 80 mm.
Look at the length of the convector. Models without a fan are best placed in the flooring along the width of the entire window opening. If you purchase a device with forced convection, then the installation must be done at 70% of the width of the window, since they generate much more heat transfer.
The width of the structure also plays an important role. The optimal value is 250–350 mm. If you need to heat a large area, then it is better to give preference to a model with a larger width.

Terms of use

Remember, the operation of the equipment is checked immediately after purchase before installation in the floor covering. After that, the heaters are connected to an autonomous or central heating system.

While moving, the convector must not be exposed to rain or snow.

Do not forget that operation should only be with a decorative grille on the convector. Moreover, it should not be covered with unnecessary objects, because this will lead to a sharp decrease in heat transfer. When the fan is turned on, this component cannot be removed. During installation work, it is unacceptable for dirt or dust to enter the device case. Otherwise, this can lead to a quick breakdown of the fan and a sharp decrease in heat transfer. Don't forget to clean your appliances once a month.The convectors of this company are easy to clean due to the flexible connection hoses. Sometimes this is done with a vacuum cleaner or just wet cleaning.

How to connect Eva convectors, see below.

Features of convectors Eva

Eva convectors have been manufactured in Russia since 2002. The experience accumulated during this time allows developers to create extremely reliable and durable equipment, characterized by its reliability. Today, wall and floor models, as well as intra-floor modifications, are available for consumers to choose from. Let's look at the features and positive features of Eva convectors:

We recommend installing Eva convector heaters in front of doors or panoramic windows.

• Resistance in any conditions - heaters operate at a coolant temperature of up to +110 degrees and a pressure in the system of up to 16 atmospheres;
• High-quality performance - ensures a long service life of Eva convectors;
• Solid design - heaters from this brand can be used in rooms with designer renovation;
• Low noise level - models with forced ventilation work so quietly that they will not wake up even the most sensitive person;
• Long-term warranty - it is 10 years.

Thus, Eva convectors can boast of good technical characteristics and their endurance.

Floor convectors, with natural convection

Eva floor convectors form the backbone of our products. Modifications with natural convection are presented at once by ten models for dry and wet rooms. They differ in their dimensions, heat exchanger area and power.For example, the Eva COIL-K series includes models of reduced power - they can act as auxiliary heating equipment.

Also on sale are Eva convectors of increased power and larger sizes. They allow you to heat large-sized premises - these can be trade and exhibition halls, swimming pools, various pavilions. An interesting feature of some units is the presence of intensive airflow, which is implemented without the use of external power supplies.

Underfloor heaters with forced convection

Eva floor convectors with built-in fans provide more intense and efficient heating. They pump heat in minutes, without making loud noises, without vibrating or buzzing - for this they use low-noise fans. On sale there are models for dry and wet operating conditions, deep and low models, low-power and extra powerful units. Eva convectors are also provided in design execution - for demanding consumers.

Wall and floor convectors Eva

It should be noted the presence of heaters focused on floor and wall operation. They are made in small-sized cases and can be used in both dry and wet rooms. Their height is from 170 mm, and copper, aluminum and stainless steel are used as manufacturing materials. As a result, consumers get the opportunity to enjoy very reliable and durable heating technology.

This category includes Eva convectors with forced ventilation, as well as parapet models designed for installation in window sills.

Models

Eva produces a large number of different types of convectors.The most popular among consumers are several designs.

KC 90.403

This underfloor unit, designed for space heating, has a width of almost 400 mm and a height of 90 mm. It is suitable for working in dry rooms. This model has a high degree of heat dissipation, close to samples with fans. The body of the equipment is made of durable stainless steel. The heat exchanger is made from a base of aluminum and copper. Its temperature is about +115 degrees.

Due to the small depth, it can be the best option for heating in a central heating apartment.

KB 90.258

This floor convector is designed for heating dry rooms. It comes with a fan. Its width is almost 260 mm, and its height reaches 90 mm. The heat exchanger of this model is copper-aluminum. The body is made of stainless steel. These devices are practically silent during operation.

KC 200.403

This model is produced without a fan. Its width reaches 400 mm, and its height is 200 mm. The heater has a high level of heat transfer. The maximum coolant temperature is +115 degrees. This floor convector, due to its relatively large dimensions, is able to produce a large amount of heat. Most often, they are used to heat large shopping centers and shops.

K90.303. +9

This equipment is shipped without a fan. Its width is 300 mm and its height is 90 mm.This convector is used only as an additional source of heating due to its small dimensions. For rooms with a large area, such a source is used together with other more powerful heating devices.

KB - 90x403x1500 mm

This floor convector has a water type of heating. The maximum heating temperature is about +90 degrees. The width of the structure reaches 400 mm, and its height is 90 mm. Temperature control is optional.

K - 100x203x900 mm

This floor convector also has a water type of heating. Its thermal power is 254 watts. The maximum heating temperature is +90 degrees. This model is produced without a fan. Its height reaches 100 mm, and its width is almost 200 mm. The depth is 900 mm. The approximate weight of the device is 7.7 kilograms.

K - 125x303x900 mm

Such a floor convector has a thermal power of 444 watts. The heating area of ​​​​such a device is 4.44 square meters. The height of the model is 125 mm, its width is about 300 mm, and its depth is 900 mm. Temperature control is optional.

KB - 90x403x1000 mm

This device has a power of 2415 watts. The heating area of ​​the device reaches 24.15 square meters. This model is manufactured together with a special fan. The structure is 1000 mm deep, 90 mm long and 400 mm wide.