Why condensation appears on the toilet bowl and how to get rid of it

Double wall cistern

In the future, this will lead to the following consequences:

• increased humidity in the bathroom;
• the occurrence of mold and fungi;
• the appearance of an unpleasant smell of dampness;
• plumbing will corrode, which will rust and lose its attractive appearance;
• the formation of rust and corrosion, the gradual destruction of the sewer pipeline;
• the tank and its bolts will begin to rust, become unusable and require replacement;
• rotting of floor and ceiling materials, which can cause partial destruction of floors.

The problem of condensation in the bathroom, at first glance, may seem insignificant, but if this phenomenon is ignored for a long time, serious consequences may occur.

Dampness, black mold, an unpleasant smell, discomfort, and complaints from downstairs neighbors about stains on the ceiling are the results of continuous condensation on the surface of your toilet cistern.

Due to the constant condensate in the bathroom, the pipes corrode and rust, which subsequently leads to their destruction and leakage.

In addition to pipe corrosion, there is a more serious problem. If you ignore the formation of puddles on the floor for a long time, then under the influence of moisture, a gradual process of decay of floor materials occurs.

We offer you to read How to wipe the rust from the toilet

As a result, water seeps below, provoking the processes of decay of materials on the ceiling of the neighbors living below. At first, raw stains will be observed on the ceiling. In the future, the destruction of the overlap between the apartments is possible.

Image gallery

Photo from

The condensate that forms on the toilet bowl collects in drops and falls to the floor. As a result, rather impressive puddles gather around the toilet. Water penetrates through the seams of the floor tiles, eroding the adhesive mortar. Having reached the overlap, the water has a negative effect on the reinforced concrete structure

Due to excess moisture, which is actively supplied by a cold toilet bowl, black mold appears in toilets and mixed bathrooms. It is a threat to both structures and people.

The presence of weakly evaporating or not evaporating condensate adversely affects the decoration of walls and ceilings, as well as building structures

Humid environment is harmful to metal parts of plumbing and plumbing valves. Threaded connections rust, which makes it difficult to disassemble plumbing fixtures, equipment and taps for cleaning, repair, replacement

Negative impact on coating and overcoating

Black mold on bathroom floor

Damp walls in the toilet

Metal plumbing parts and fittings

Manufacturers of modern toilets are aware of the problem of condensation and offer their own effective solution. The latest models of toilets are being produced with an improved cistern design that does not allow them to “cry”.

The double-walled flush cisterns of today's toilets never sweat.

In these models, an additional plastic container is inserted inside the tank, the walls of which do not come into contact with the ceramic surface of the product. As a result, its temperature is always constant and equal to room temperature. This constructive solution allows you to solve the problem once and for all. However, for many buyers, these models remain inaccessible at a cost that is several times higher than the price of conventional toilet bowls.

Some amateur craftsmen are trying to deal with condensate on the tank by pasting its inner walls with heat-insulating material

If expensive "non-crying" models are still too expensive for you, then try installing forced ventilation. Even a simple fan inserted into the ventilation window and turned on when the light in the bathroom is turned on will solve the problem of condensation on cold surfaces.If after that the toilet bowl sweats, then call specialists to install more powerful ventilation systems.

How to eliminate fogging?

In the main, the elimination of either high humidity in the room, or the elimination of temperature differences can help. You can remove condensate from the toilet bowl by one or more of the following actions.

Setting the drain mechanism

For starters, you can try to repair / adjust the drain system. The accumulation of water on the walls of the tank can be caused precisely by a malfunction of this unit. If the drain valve is not firmly seated, water can constantly go into the toilet. The tank in this case will be continuously filled and cooled. In such a situation, the volume of condensing liquid can reach 1-2 liters per day.

The fight against perspiration will be more effective if you start by repairing drain and shutoff valves. You should check the performance of all nodes and, if necessary, replace with a new one. To quickly deal with the repair, we advise you to see how the toilet is arranged.

Before installing a new mechanism, you need to check for lime deposits on the drain hole. If necessary, remove them and replace the rubber seals. To avoid deformation of the sealing gaskets, it is recommended to tighten the nuts not with keys, but with your hands, but with the maximum possible force.

Reducing the volume of drained water

You can try to overcome the condensate on the drain tank by reducing the volume of the drain. Of course, with a large number of residents and continuous use of the bathroom, this will be difficult to achieve. However, the amount of drained water should be kept as low as possible. To do this, you can use the half-descent button.In the absence of such a system, it is recommended to replace the outdated device with a modern one. It will help to get rid of condensate and save a certain amount of water.

Elimination of temperature difference

Condensate formations can be combated by heating the accumulating water. If the supplied water is the same temperature as the air in the room, then drops will not accumulate on the surface of the tank. This can be done by connecting a system with instantaneous water heating, which has a thermostat, and creating proper thermal insulation of pipelines. The temperature can be set between 20-25°C.

On the other hand, you can lower the air temperature in the bathroom. But not everyone will like this plan of action.

Air dryer installation

The device must be selected in accordance with the level of humidity, area of ​​\u200b\u200bthe room and your budget. Based on the principle of action, 2 types can be distinguished:

1. Absorption - a container filled with an absorbent substance that perfectly absorbs moisture. Silica gel is often used.
2. Condensation - cools the air, and excess moisture condenses and settles inside the device.

Creation of high-quality ventilation

Protecting the tank from condensation must begin with good ventilation. Not infrequently, during repairs in a private house / apartment, the ventilation openings are closed or they simply do not undergo maintenance. However, this is a significant error, since it is she who is able to completely eliminate problems with fogging of the toilet bowl.

Checking the operation of ventilation can be carried out very simply: just bring a sheet of paper to the hole or bring a lit match and put it out. If sufficient draft is observed, the hood is functioning normally. If there is no draft at all or it is weak, then the ventilation ducts should be cleaned.

One of the easiest ways to solve the problem is to install forced ventilation.

Installation of a special tank

Modern technologies have long begun to solve the problem under consideration. One of them is a toilet with a double tank. The modification looks like this - a plastic tank inside, and outside - a familiar ceramic casing. A gap is created between the ceramic and plastic containers, which ensures that the water temperature is maintained at the same values ​​as room temperature. Installation of such a system can unequivocally solve all issues with the deposition of condensate.

However, such double tanks have one significant drawback - a high price.

Internal thermal insulation

Buying an expensive cistern / toilet bowl is not always advisable. You can solve the problem yourself. For this, polyethylene foam is placed inside the tank. Due to such thermal insulation, it is possible to reduce the temperature difference several times and eliminate drops.

Naturally, the situation with the condensate on the tank needs to be corrected. Otherwise, the consequences may be unfortunate. If you approach the solution comprehensively, then the situation will definitely improve.

How to get rid of condensation on the toilet bowl with your own hands

To solve the problem with condensate in the bathroom, you must correctly identify and then eliminate the cause.In most cases, you can deal with the trouble yourself with the help of improvised means and simple manipulations. However, sometimes the help of specialists or the replacement of plumbing is required.

Why is it important to identify the cause and eliminate it as soon as possible? The answer is simple - a neglected problem quickly manages to cause many serious consequences:

1. The appearance of rust on the pipes and the gradual destruction of the water supply.
2. An increase in air humidity, which contributes to the development of mold and an unpleasant odor.
3. Rotting materials from which floors and ceilings are made. This phenomenon leads to the destruction of floors between apartments and very expensive repairs.

Condensation in the bathroom or toilet leads to the appearance of fungus. It not only spoils the aesthetic appearance of the room, but also poses a health hazard to residents of an apartment or house.

Forced ventilation and normalization of humidity

If the problem of condensation is due to high humidity in the room, take care to create additional forced ventilation. The fan pulls out moist air, and it is replaced by dry air from the living quarters.

For the normal operation of the ventilation system, follow a few simple steps:

1. At the bottom of the interior door, install a small grill to ensure normal air circulation in the room.
2. Clean the ventilation well and opening from construction and other debris.
3. Install a mains powered fan in the system.

When installing the appliance, select how it will be turned on. The best option is a direct connection to the switch. In this case, it will start when the light is turned on.

With an isolated connection, the fan is switched on as required by a separate switch.

The first step in eliminating condensation is setting up the ventilation system. Clean out the well and make sure there is sufficient draft to remove damp air from the room

A special device, a dehumidifier, will help to normalize the humidity in the bathroom in a private house. The principle of its operation is quite simple - a powerful fan transfers air into a special chamber, where it condenses under the influence of low temperatures, and moisture is collected in a special container. Then the dried air is heated and returned back to the bathroom.

Normalization of water temperature in the tank

If the temperature difference is the cause of the problem, protect the tank from contact with cold water. For insulation, use thermal insulation materials: tepofol, polystyrene or foamed polyethylene.

Work order:

1. Empty the tank and dry it well.
2. Glue the thermal insulation material with waterproof adhesive and press firmly to the surface.
3. Sealant fill all the cracks and go through the joints.
4. Wait for the glue to fully set and open the tap for water supply.

To get rid of perspiration on plumbing will help increase the temperature of the liquid in the tank. This can be achieved by connecting a warm water faucet or boiler to the toilet system.

Another way to deal with condensation is to increase the temperature of the water entering the tank. To this end, insulate and insulate all pipes. If such a trick does not help, you will have to install a boiler that will heat the water to room temperature and supply it to the toilet system.

An easier and more affordable way is to install a half-drain mechanism.Thanks to this, half of the warm liquid will always remain in the tank, which will dilute the ice water coming from the water supply.

Installing a half-drain mechanism will help to avoid condensation and save the family budget.

Toilet replacement

If none of the methods used has brought the desired result, it's time to update the plumbing. When buying a toilet, give preference to products equipped with an anti-condensation shell.

Such toilets have a unique design: outside it is a classic tank, and inside - a plastic vessel for water. The presence of an air gap between ceramics and plastic provides protection against condensation.

With the ineffectiveness of simple ways to deal with perspiration, a radical method remains - replacing plumbing. Choose a toilet in which the tank has a double system and an air gap

To install a new toilet, ask a plumber for help. Even the slightest mistake can lead to an accident and flooding, as well as to financial expenses that are many times higher than the cost of the services of the master.

What threatens the accumulation of condensate

High-quality plumbing has virtually no parts that can be subject to the destructive power of corrosion. Fasteners used to assemble equipment are made of stainless metals or wear-resistant plastics. However, not all plumbing manufacturers use high-quality materials. Moisture drops formed on the walls of the drain tank increase the level of saturation of the air with water vapor, which can lead to corrosion on the metal parts with which the tank is fixed.

Constantly collecting droplets will lead to corrosion on metal elements.

In order to avoid the appearance of rust, it is desirable to cover the fasteners with a layer of anti-corrosion grease.

If the design of the toilet bowl provides for a hinged tank, and not installed on a shelf, then drops of condensate will leave not only unsightly smudges on the walls, but also create favorable soil for the appearance of mold or fungus.

Drops of perspiration can drip onto the floor, forming a puddle that will become a hotbed of bad smell. In addition, the water, evaporating from there, will serve as a source of increased humidity, which again will lead to the appearance of fungal infections. Water flowing from the walls of the drain tank will inevitably come into contact with the pipes, which will cause them to corrode. Rust will appear on all unprotected steel parts of the structure, even on the tank itself if it is made of metal.

How to get rid of condensation?

Before proceeding with the elimination of the problem, you need to study the main causes of its occurrence. For each case there is an individual instruction, which can be found below.

Forced climate change

Condensation is often caused by poor ventilation. First of all, it is worth checking its contamination. This problem is relevant both for apartments in new buildings, where construction dust and materials often accumulate, and for Khrushchevs, which have not been cleaned by public utilities for years.

An effective way to control humidity is to install an automatic hood. However, before that, you can check the hole itself for clogging by bringing a match or a lighter to it.If the ventilation is in order, then you can install a portable dehumidifier, which will bring the microclimate back to normal.

heat water

As noted above, heavy sediment accumulates due to the high difference between the temperature of the water and the room itself. Increasing the temperature of the liquid to normal will help get rid of the eternal leak. There are several ways to solve the problem:

• insulate the pipeline, relevant for owners of a private house. The easiest method is polyurethane foam;
• conduct warm water to the tank;
• install a heating system - a boiler room;
• create conditions for heat exchange, as an alternative, install an apartment riser;
• half drain. This is when cold water will be diluted with hot.

Difficulties can arise if too hot water is used. Scale forms an unpleasant crust inside the tank, which can also bring even more problems. The average water temperature should be equal to the indoor microclimate.

Repair drain

You can also repair the drain with your own hands. It is enough to remove the tank cap and find the cause of the constant leak. How nodes interact:

• The filling valve regulates the amount of water in the tank. As soon as the float in it reaches the desired level, the water supply stops;
• the plastic float works like a rocker. Very often, due to poor quality water, it collapses. If this happens, you need to make a replacement;
• the drain valve in modern models is regulated by a button. Often it sticks or does not reach the desired level;
• overflow prevents the water from reaching the top level.

Most often, the lever mechanism breaks (associated with the button). Water slowly penetrates through the drain, cold water refills the tank.You can solve the problem with condensate by repairing the fittings of the drain tank. Only 10-15 minutes of work with tools, and you can forget about excess moisture. Additionally, you can fix the joint with sealant.

Reduce the amount of drain water and air humidity

The less water in the tank, the faster it heats up. Moreover, reducing the consumption will help save money, as the meter also reacts to the set of water in the bathroom. As an alternative to the load that citizens often place inside the tank, an additional tank can be used. The distance between the walls and the new plastic tank should be 3-4 mm. To avoid leakage, it is recommended to install a seal.

Experts recommend that citizens purchase improved models with double faience. Then you can forget about adjusting the microclimate. Their cost is 20-30% higher than the usual option, however, citizens return their funds by reducing water consumption and the cost of future repairs of the entire premises.

How to get rid of condensation on the toilet bowl

The appearance of condensation on the toilet cistern is a rather unpleasant phenomenon. Condensation accumulates, covering the entire tank with drops. Droplets roll down, forming a wet spot around the toilet. And such dampness is not at all harmless.

Accumulating moisture causes mold and fungi to quickly spread along the walls and plastic panels, covering them with a black coating, and also destroying the floor covering.

Mounting bolts rust, mirrors become cloudy, wood lice and other insects appear, as well as microorganisms that destroy the finish and cause irreparable harm to health.

Fungal spores, easily carried through the air, contribute to the development of pulmonary diseases in those who live in such an apartment. Once in the body, spores cause the appearance of lesions of the respiratory system up to pulmonary edema.

Therefore, it is necessary to get rid of condensate immediately, as soon as they notice its appearance in the bathroom, so as not to wait until excess moisture becomes a breeding ground for fungi and black mold, which corrodes everything around.

Let's find out why condensation appears on the walls of the toilet cistern and how to deal with it on your own.

Better ventilation

Set up ventilation. if it doesn't work well it's not that hard. To improve the operation of the hood in the bathroom or bathroom, you can install a small axial fan that provides forced ventilation and removal of heated moist air from the room into the ventilation duct and then into the exhaust stack of the building's ventilation system.

The fans produced today are characterized by low power consumption and ease of installation, which allows you to install it in a matter of minutes, even if you do not have experience in performing such work.

When choosing a fan, you should first of all pay attention to its performance. In accordance with modern sanitary norms and rules in such premises, air exchange in the amount of 25 cubic meters / hour should be provided

Earlier we already wrote how to choose and install a fan. You can also see the installation of a silent modern exhaust fan Silent 100 CZ Design below:

In addition to installing a fan, you should pay attention to whether it is possible to supply fresh air to the room.So, for example, many people put a threshold in the bathroom

If installing a threshold in other rooms helps prevent drafts on the floor and is fully justified, then installing a threshold in the bathroom prevents air from entering, contributing to the creation of constant stuffiness in the room

So, for example, many put a door with a threshold in the bathroom. If installing a threshold in other rooms helps prevent drafts on the floor and is fully justified, then installing a threshold in the bathroom prevents air from entering, contributing to the creation of constant stuffiness in the room.

You can improve air exchange by making holes in the bottom of the door or by installing special doors with ventilation holes in the bottom:

Why does condensation form?

Condensation on plastic windows from the side of the room can form for various reasons that must be established, otherwise you will not be able to get rid of the problem that will appear every time there is a temperature drop on the street.

The most common causes of condensation on plastic windows are as follows:

Lack of ventilation in the room with high humidity. With wooden windows, this problem does not arise, because they have the ability to breathe: passing moisture through themselves, they take it out into the street. The plastic construction does not have this ability, because it is absolutely tight. That is why, in order to cope with the problem, you will either have to ventilate the room as often as possible, or install a special valve on the windows for ventilation. In addition, you can check whether the ventilation provided in the apartments is working, and if not, restore its operation. It must have good traction.You can check this by holding a piece of paper to the vent. He should cling to him without falling to the floor.

Proper ventilation in the apartment

Condensation on plastic windows may appear due to too wide window sills. Due to the fact that such a window sill prevents proper air circulation from the heater to the window, and the window is the coldest part of the structure, since outdoor cold directly affects its glass, drops may appear on the glass surface. This is especially noticeable if there are a lot of pots with plants on the windowsill, which, as a result of their vital activity, affect the appearance of condensate. In addition, moisture can spill out of the pots, and the earth also creates excessive dampness. In order for condensation to stop forming, the pots should be at a distance from the glass, and the window sill should be wide enough to allow warm air to rise unhindered and dry the glass.

For wide window sills, additional ventilation grilles are needed to access warm air.

• If a double-glazed window consists of two glasses and has only one chamber, it cannot sufficiently resist low temperatures and freezes quickly enough if the temperature is exceeded by 15-20 degrees. Due to the difference in temperature indicators between the room and the street and the insufficient thickness of the window, the condensate will turn into frost, which will melt when it gets warmer and end up on the windowsill. This problem can be solved only by replacing the double-glazed window with a thicker one, for example, a two-chamber one.
• Errors were made while installing windows. In order for a window with a double-glazed window to function correctly, its competent installation is necessary.During the installation process, violations can be made, for example, a double-glazed window will depressurize, the distance between the wall and the window frame will not be sealed, the ebb is correctly installed, the slopes are insulated and installed correctly. Sometimes such problems can be corrected, for example, by removing the ebbs and slopes, making the joints airtight (for this you can use mounting foam and sealant), re-installing the ebbs, but now observing the technology. Moisture, thus, will not accumulate and appear on the glass.

Plastic window failure

• Another reason why condensation forms on plastic windows is the installation of a skewed window. If the structure has not been leveled, it may not close tightly. Because of this, the gaskets that are between the sash and the frame do not provide a sufficiently tight fit for the structure. Moisture passes through these slots, cold air can enter, as a result of which not only condensation will appear in the room, but also a draft or its rapid drying is possible.
• The use of low-quality fittings that cannot ensure a snug fit of the sash to the structure or allow you to adjust the sash. Replacing such fittings, as a rule, quickly solves the problem.
• Use of poor quality sealant. If the seal is worn out or initially not of high quality, it will let in moisture and cold air, as a result of which you will notice condensation. You can get rid of it by replacing the seals in the windows.
• Depressurization of a double-glazed window.If the double-glazed window has cracks or any defects, it was disassembled and dry air or gas escaped from there, it will accumulate condensate, including between the glasses. This problem is solved only by replacing the double-glazed window with a new one.

Knowing why condensation forms on plastic windows can help you fix the problem by getting rid of its cause, so take a close look at your window before you start fighting this phenomenon.

Conclusions and useful video on the topic

The toilet bowl can be insulated from the inside using heat-insulating material. You can see this in action in the video:

The video clip demonstrates how the simplest 10-mm insulation inside the toilet bowl will behave after a year:

On the effective disposal of condensate by supplying heated water to the toilet bowl in the video:

In addition to insulating the drain tank, it will not be superfluous to take care of the pipes that supply cold water to the apartment / house. About it in the video clip:

Having dealt with the cause of the appearance of condensate on the drain tank, you can choose the most appropriate option for getting rid of it, based on specific conditions.

This can be a budget solution, which is easy to implement with your own hands, or the purchase of a modern model of a sanitary ware with a tank that has a condensation protection function.

Share with readers your experience in removing condensation from the toilet bowl. Please leave comments on the article and ask your questions. The feedback form is located below.