Cascade waterfall mixer: device, pros and cons + review of the best manufacturers

Cascade basin mixer

The faucet "Waterfall" for the sink is considered the most affordable option for a wide range of users.As a rule, these structures are mounted:

• Directly on the sink or countertop. When installing for water supply, a flexible hose is used, which allows you to choose the appropriate mounting option for plumbing.
• On the wall. The Wall Mounted Waterfall Basin Faucet is a versatile device, as it can also be used for a bathtub. The installation of such a model involves a preliminary supply of cold and hot water in the wall, and its disguise. The mixer is mounted on the outlets of the inlets. This type of attachment is considered the most convenient and popular.
• Floor. "Waterfall" - a mixer, which in this version is a vertical rack attached to the floor, where the cold and hot water supplies are hidden. It is through it that water is supplied directly to the mixer itself. The design of such models is very original, but requires large bathrooms.

The main difference between cascade faucets and conventional faucets is the spout method - it is wide and flat. In all such structures, there is no aerator - a device that enriches the water with air, as a result of which the water consumption increases quite a lot.

Faucet Manufacturers Niagara

These mixers are manufactured by companies from:

Russia. (BAS, Aquatek, Triton)

The Russian manufacturer produces faucets BAS Cascade Niagara, as well as Aquatek Niagara, which are in great demand in the plumbing market. Triton NSK Niagara cranes on board with a 1-year warranty period are very popular.

Slovenia (Kolpa San).

Slovenia produces Kolpa San Niagara products and bears warranty obligations to all buyers.The country's location in the center of Europe gives it the ability to instantly respond to customer needs. The responsibility of the manufacturer is ensured by the availability of quality certificates for products, as well as the provision of information support.

Turkey (NSK Grand).

No less famous are Turkish products, the durability of which is ensured by Italian SEDAL components. Turkey has been producing faucets since 1980, and entered the Russian market about 10 years ago. A Turkish representative office for the export of Turkish sanitary ware operates in Moscow, due to which it is easy to purchase NSK Grand Niagara faucets. For example, the NSK Grand Niagara 20905.02 is four-section with a hose length of 1.5 m, as well as a convenient spout-shower switch.

The high quality of this manufacturer is complemented by a beautiful bronze finish on the faucets.

Czech Republic (RAV SLEZAK).

Czech faucets RAV SLEZAK Niagara are produced using proven cartridges of Hungarian and French brands. The company ensures the reliability of its products and provides a 6-year product warranty.

Niagara faucets have gained great popularity due to the high-quality brass body and chrome finish. The mixer device is compact and easy to use. When choosing a manufacturer, you should consider your financial capabilities. The Russian Aquatek will be more budgetary, and, for example, Kolpa San will be more expensive. But the high quality of the latter fully justifies its cost.

By leaving a comment you agree to Privacy Policy

source

Advantages and disadvantages of cascade mixers

We will give objective performance data and debunk some not-so-true advertising gimmicks.

1. The bath is filled with cascade mixers 2-3 times faster than ordinary ones. It is not true. The fact is that the volume of water depends on the diameters of the outlet of hot and cold water on the mixer, the diameter of the spout in all types of ordinary mixers is much larger than the total diameter of these elements. The type of spout does not matter, it can be at least a meter in size, but it will let in as much water as it gets from the mixer.

   Bath faucet with cascade spout

2. Ease of use. A very controversial statement. Ordinary spouts can be rotated, while taking a bath, users have the opportunity to fill the bath in the place that is most convenient for them. Cascade mixers supply water only in one place, it is impossible to change direction. Another disadvantage of them is that there are difficulties if it is necessary to draw water into a container of small diameter. And such situations can arise for each user of the bathroom.

   Illuminated cascade mixer

3. Difficulties with care. The usual spout is much easier to maintain, water flows in a hidden pipeline, only the external visible surfaces have to be cleaned. Cascade mixers are difficult to clean from solid deposits; contamination appears both on external surfaces and on those over which water is poured. Often they are closed and transparent, removing calcium deposits or rust from there is a very big problem.

   Waterfall faucet mounted on a wooden countertop

4. The relative humidity in the rooms increases. Hot water from open wide spouts evaporates intensively, which significantly increases the already high humidity in the premises.High humidity creates problems both for finishing materials and for blizzards and plumbing in bathrooms. In addition, heat losses for filling the bath increase, and this is an unpleasant fact at current energy prices.

   Mixer with wide spout

5. High price. The average price of cascade bath faucets is many times higher than the same indicator for traditional types.

   Cascade mixers are much more expensive than classic ones.

6. Installation difficulties. Most models of cascade mixers have several elements that require separate mounting on the wall or bathtub edge.

   Bath faucet

As you can see, cascade mixers have only one indisputable advantage - the original appearance. If you have a desire to decorate your bathroom with such an accessory, then first read the installation instructions.

Faucet with cascading spout - LED lighting

Illuminated faucet on the side of the bathtub

Design features of cascade mixers

The main difference between a waterfall faucet and a standard faucet is the wide spout shape. Thanks to a flat plate, water flows in a continuous stream and very reliably imitates a one-stage mini-waterfall.

To enhance the resemblance to a natural phenomenon and give the design originality, various decorative details can additionally be used.

Waterfall faucet controls can be installed in one place, and the spout is located at a considerable distance without compromising the functionality of the system

But, in addition to visual nuances, such taps also have an important design feature - separate installation of the mixer and the control lever.The water supply is carried out simply - using metal-plastic tubes or flexible hoses.

A glass or glossy metal faucet with backlight looks very impressive. But before you install a similar decorative element in your own bathroom, think about the difficulties of care.

In addition to the aesthetic pleasure that gives the appearance of a man-made mini-cascade, swimming under a wide stream of water gives an unforgettable feeling of relaxation and comfort. At least, that's what the slogans of cascade crane manufacturers say.

But in order not to get confused in the sweet networks of advertising, we propose to consider in more detail the real advantages and disadvantages of home waterfalls.

This is interesting: Franke faucets - the best models

Bathroom faucets: 30 photos of a variety of models

Choosing beautiful and reliable plumbing can be an interesting quest for the average person. Bathroom faucets, presented in store windows, may have the most sophisticated design, but turn out to be of low quality.

In this article, we will consider the types of modern mixers, as well as recommend reliable manufacturers. In the photo in the article, we have placed variations of mixers that are in demand.

This article should help you make the right choice.

Bathroom faucets: choosing a reliable faucet

The most durable are brass bathroom faucets. In order to avoid corrosion, the surface is coated with chrome, nickel or enamel.

Quite high-quality is stainless steel plumbing, which can last up to half a century.But, most likely, during this time its design will become obsolete. Materials such as cermet, glass, crystal and even wood can be used in the manufacture of designer models.

Bronze occupies a separate niche in sanitary equipment. Bronze bathroom faucets are highly durable and have a golden hue, making them look harmonious in interiors made in classic or retro styles.

Aluminum-silicon and plastic bathroom faucets are a cheaper option that has low strength characteristics.

Types of bathroom faucet designs

According to their design features, all mixers are divided into four main types. In order to make the right choice, let's get acquainted with their main characteristics.

Single lever bath mixer

Bath faucets, the photos of which are presented in the article, may have one lever as a control mechanism. Lever single lever bath faucets have a shower switching system provided by a built-in button. A feature of this type of device is the presence of a cartridge in the internal equipment, which can be ceramic or ball.

The disadvantage of this design is the high requirements for water quality. If the water filtration is insufficient, the cartridge will become clogged and require cleaning or replacement.

Bath faucet with two valves

Such taps are familiar to everyone since childhood, but, nevertheless, they do not lose their popularity. In some cases, for example, when decorating a bathroom in neo-classical or retro styles, two-valve bathroom faucets, as shown in the photo, become one of the main figures.Inside it is a small chamber, where, in fact, the mixing of water takes place.

Bath mixers with thermostat

In apartment buildings, there are often situations when, during the adoption of water procedures, there is a sharp decrease or increase in water pressure, which entails a change in the flow temperature.

This causes discomfort and inconvenience, since you have to adjust it again. Bathroom thermostatic faucets solve this problem quite well. Such devices help to achieve the supply of water at the temperature it was set, despite the pressure.

Externally, thermostatic bathroom faucets practically do not differ from ordinary ones. The whole secret is in the internal structure, namely, in the presence of a valve with built-in plates that respond to temperature changes.

Touchless bathroom faucets

These mixers include infrared and touch models. These are, in a way, "electronic faucets" that require power from an outlet, battery or accumulator. Touchless bathroom faucets have sensors that respond to putting your hands under the spout.

Special mechanisms bring the mixer into working condition, and automatic water supply begins. Some models have a visible electronic display that displays the set parameters.

A touchless bath faucet (photos of various models are in our catalog) has a rather beautiful aesthetic appearance, it is comfortable and easy to use. In addition, compared to other types of mixers, it consumes much less water.

Bath faucet: types of spouts

Faucet spouts come in a variety of sizes and shapes, each with its own characteristics.There are stationary and rotary designs, as well as design options that can bring a touch of elegance and originality to the interior.

Bath mixer with long spout

The most convenient model is considered to be a design with a long spout, since such models can serve both the bath and the sink located near it at the same time. Thus, funds are significantly saved for the purchase of a second mixer and the organization of piping for it.

Peculiarities

Waterfall faucets differ from all existing analogues in the shape of the spout. In their body there is no aerator mechanism that saturates the water flow with air, and the hole at the end of the tap is flattened and wide - it is for this reason that the liquid flow flows at high speed. The similarity with a natural waterfall gave cascade devices a second name - waterfall.

Another feature of waterfall faucets is a large throughput (the bathtub is completely filled in a matter of minutes), which standard devices cannot boast of.

This moment is provided by large diameter supply pipes, which are included in the kit. Otherwise, waterfall faucets are designed in exactly the same way as their other "brothers", they can be used with almost all types of plumbing fixtures.

In fact, thanks to cascading taps, you can create a mini-waterfall in the house, which will already make the interior unique and inimitable. But manufacturers do not stop there. In an effort to emphasize style and originality, they produce waterfall ganders from the following materials:

• chromed metal;
• glass;
• ceramics;
• brass;
• bronze.

More often than others, they buy chrome and glass models.But on sale you can find products decorated with colored or gold enamel. According to individual projects, stone, crystal, crystal-decorated faucets and even wooden models are often created.

Manufacturers also complement their creations with various trendy mechanisms:

• backlight (often use LED lamps);
• thermostat;
• pressure compensator;
• touch control panels;
• contactless sensors.

Waterfall faucets do not differ from conventional devices in the principle of control. The main methods by which you can manage a mini-waterfall include:

• valve. In order for water to flow, you need to turn the lever / valve / handle a few turns.
• Single lever. The most popular and demanded type of management. Opening the tap, mixing water and adjusting the pressure of the water flow is due to the operation of one lever. Turning it to the right / left changes the temperature of the outflowing liquid.
• Sensory. New in recent years. To adjust the flow of water and set the desired temperature, just lightly touch certain touch buttons.

Based on the above, we can highlight the main advantages of cascade mixers:

• fast speed of filling the bathroom;
• reduced noise during operation;
• less splashing of water;
• a large number of designs.

Meanwhile, there are "cascades" and disadvantages:

• High price. Even a mixer of a well-known manufacturer that is good in all respects will cost less than a cascade one, especially a sensor one.
• Difficulty of installation. Some models of cascade cranes require special fasteners on the bathroom (sink) or require pre-installation of supplies along the wall or floor.
• Increased humidity level in the room due to the evaporation of a large volume of warm water from a flat spout. As a result - the formation of mold and fungus on the finishing surfaces. It's all about good ventilation.
• Large fluid flow.
• Non-reversible design. The cascade faucet has a clear purpose - to direct a jet of water into a washbasin or fill a bathtub. It is impossible to pour water into narrow and small containers with it.

Installation on the side of the bath

The requirements of the modern buyer for a stylish and comfortable design of bathrooms are constantly growing. A newfangled competitor to an ordinary mixer has appeared recently, but its popularity is rapidly gaining momentum. This novelty is attached to the bath or washbasin itself, which gives the bathroom design not only style and an unusual look, but also maximum comfort. Cascading faucets look especially impressive, imitating a miniature waterfall and instantly filling the bathtub with water.

When choosing a built-in type of mixer, it must be remembered that as a result of frequent loads on a flexible hose, the possibility of malfunctions increases several times. That is why a professional plumber will advise you to leave free access to hidden water supply structures. The best option is to hide the pipes under a removable decorative panel.

Installing the faucet on the side of the sink does not take much time for a professional plumber. An experienced craftsman will cope with the work in a few hours.

But if you decide to install the mixer yourself, then good preparation for work is simply necessary:

• It must be remembered that holes that were not planned during the development of the model can only be cut out in acrylic or plastic parts. Cast iron and steel bathtubs, in order to avoid damage and chips, it is better not to touch at home.
• Prepare a tool that will come in handy for your work: an electric drill, screwdrivers, an adjustable wrench, a milling crown for cutting holes.
• Carefully study the internal structure of your faucet and how it is attached.

Installation steps

• Choose the place where the mixer will be attached and mark it with a simple pencil;
• We cut a hole of the required size with a diamond crown;
• The mixer, with the attached silicone gasket, is installed in the hole and fixed with a fixing nut under the side of the bath;
• We attach flexible leads for hot and cold water to the mixer;
• We install the mounting panel that comes with the mixer;
• We turn on the water and check the quality of the installation of the mixer.

Varieties of home waterfalls

The main feature of cascade mixers is a non-standard design

When choosing, it is important to take into account not only the attractiveness of the product itself, but also the place for its installation, material, shape and other important nuances.

By purpose and configuration

Depending on the installation location, it is possible to purchase a basin faucet or bath system, which is additionally equipped with a shower head with a hidden hose.

Moreover, thanks to separate installation, the installation of each node can be carried out in the most convenient place, for example, a tap next to the spout, and a shower on the opposite side. It all depends on the layout and personal preferences.

In addition, cascade mixers can be:

• single-lever, when all control is carried out by turning a single handle / joystick;
• two-valve - for separate supply of cold and hot water;
• touch - complex models with an electronic module and several control buttons for opening and closing water, as well as adjusting the flow temperature.

To install a simple faucet with one built-in lever, 1 hole will be enough, but to install the system on the side of the bathroom, it may take from 3 to 5 - under the spout, shower head, switch and separate valves for supplying hot / cold water.

Difference in installation method

There are several options for installing home waterfalls, which vary in complexity not so much as installation as preparatory work.

Wall models. Wall-mounted faucets will require a preliminary supply of hot and cold water, the pipes for which will need to be disguised as a cladding or a false panel. A special bar is installed at the outlet of the inlets, on which the spout is fixed.

In-sink faucets are easy to install. Almost all washbasins have a hole for attaching a faucet, but if the design does not provide for it, you can make an insert into the countertop of the cabinet or on the working surface of the kitchen corner.

But with the installation on the side of the bath, you will have to work hard, because in cast iron or metal products it is quite difficult to cut holes of the desired diameter.

But with the growing popularity of home waterfalls, many manufacturers are already offering showers and bathtubs either with a mount for this system or with an already built-in design.

Floor faucets are the rarest type of waterfalls.They are a vertical rack that masks the hot / cold water supply.

Such systems are used to fill swimming pools or free-standing baths and are installed during the renovation process before the floor is covered with a coating.

For original design

Appearance is the main highlight of cascading cranes, so every year designers use more and more tricks to please customers with original novelties.

Waterfall faucets can be made in the form of a round or oval plate, flat or intricately curved plate, laconic square or rectangle.

Today, the trend is to disguise the mixer as furniture or decor items. Moreover, many designer faucets look so non-standard that until the water flow flows, it is difficult to determine exactly where the spout is located.

As additional elements, manufacturers offer:

• illumination of the water flow and the tap itself;
• pressure compensators;
• a thermostat that controls the temperature of the water supply;
• contactless sensors.

For the sake of beauty and original design, the control elements and the spout of the cascade faucet can be made of various materials.

The mixers themselves are most often made of bronze, chrome-plated, enameled steel or brass. In the premium line, you can also find options coated with precious metals.

But for the spout, tempered glass, stainless steel and ceramics are most in demand.

Faucet "Waterfall" Ledeme

For those who want to equip their kitchen or bathroom with an inexpensive faucet of excellent quality, Ledeme products are perfect. Despite the low cost, the products of this manufacturer are maintainable, durable and able to decorate any interior.The mixer "Waterfall" Ledeme is made in accordance with European quality standards. This model is made on modern Italian equipment from high-strength brass and colored glass. The mechanism is cascade, single-lever. Spout 170 mm high. Ceramic cartridge D40. The kit includes a flexible hose. The country of production is China. Warranty - 36 months.

By purchasing a Ledeme faucet, you will not only save money. The interior of your kitchen and bathroom will look more respectable and stylish.

Varieties of home waterfalls with a spout of water

When choosing the right cascading faucet for your bathroom or kitchen (less often), the buyer is guided by its appearance.

But it is also necessary to pay attention to the mounting option and the material from which the product is made.

Purpose and equipment

The complete set of the cascade mixer differs depending on the location and fastening. For example, there are models that are designed to supply water from the wall, and there are options for a combined faucet and shower head. In addition, there are differences in configuration:

1. Single lever. Management is realized by means of control of one handle-joystick.
2. Double lever. Separately, there is a control lever for hot and cold water.
3. Touch. Management is carried out by complex programming or control of the water supply through the remote control. There are more expensive models with remote control through the phone app.

To install a single-lever waterfall faucet, one hole drilled in the wall is enough. But to mount the system on board, you will need 2-5 holes: for a spout, a watering can, a switch, and valves.

Location - wall mounted or built into the bathroom (on board)

The method of fastening a waterfall faucet varies depending on where exactly it is planned to be installed - on the side of the bathtub or in the wall. The installation is also influenced by the interior solution and the stylistic direction of the room.

The cascading faucet on the wall can be located at the top (at head level) or at the bottom of the wall with the ability to control the height of the water supply. The latter option is different in that there is a retractable hose inside the complex structure. Mounting the waterfall faucet at the top provides for the presence of a control unit in any other place in the room, and can replace the shower head.

The faucets built into the side of the bathroom are fixed, and therefore, before mounting, it is worth analyzing the practicality of the chosen spout location and its accessibility. The inability to control the turn is the main drawback of such a model.

Separately, you should consider the method of locating the tap in the kitchen. As a rule, a separate sink is chosen for such a plumbing fixture, which is more often used not for washing dishes, but for rinsing hands.

Floor standing cascade mixers

A separate category is the method of placing the crane on the floor. In this case, a rack is used in the same stylistic direction as the mixer itself. A spout is attached directly to it, and water pipes are hidden inside the structure.

Often such modifications are used in large bathrooms or near pools.

Based on materials

The production of cascade-type bathroom or kitchen faucets does not differ from ordinary analogues. The same materials are used as for the manufacture of double-lever or flow valves under pressure:

• stainless steel;
• ceramics or porcelain (less often);
• copper or bronze;
• metal and various alloys;
• brass;
• acrylic.

Originality of design for a sink or acrylic bathtub

Unusual appearance is the main advantage of this model. Therefore, manufacturers are trying in every possible way to surprise the user with an unusual design and appearance of both the crane itself and the decorative elements around it.

The mixer in the form of a round plate with a central spout of water looks like a plate constantly filling with water. If you add backlighting to this effect, you can get an unusual version of a home decorative mini-waterfall.

Water pouring out of a flat wide surface is an original solution for a baroque freestanding bathtub.

Graceful legs with multiple golden patterns and a waterfall pouring from a flat and rectangular plate set in the center are an unforgettable sight that can be enjoyed forever.

A disguised tap under a flat stand with flowers comes to life at the touch of a hand. Touch sensors and a thermostat with the ability to control the water temperature create the effect of being in nature.

This is interesting: Kludi faucets - Balance, Zenta and Bozz models, white bath faucets, reviews

Kinds

Since waterfall faucets are characterized by an unusual design, when buying them, it is important to pay attention not only to the original appearance, but also to the shape, the material from which they are made, and the installation site. Depending on the configuration and purpose, the taps are in the form of a waterfall for the sink, and for acrylic bathtubs they are additionally equipped with a hidden pipe and a convenient shower head

Since the installation of the device is carried out separately, each node can be placed in the most suitable place, for example, a cascade mixer is placed next to the spout, and the shower is on the opposite side. A wall-mounted faucet with a cascading wide spout is also commercially available; its watering can is installed on the wall, choosing a convenient height in advance. In this case, the water supply is hidden behind a decorative panel or trim.

The waterfall faucet is also divided into:

• conventional single-lever, in which control is due to the joystick (single handle);
• two-valve, where the flow of hot and cold water is separately regulated;
• built-in sensor, which looks like a more complex device with a control for opening / closing water and an electronic device that controls the flow temperature.

Cranes and type of fastening differ among themselves. Each model requires not only proper installation, but also preparatory work. Faucets fixed to the wall need an initial connection of water, their pipes are placed under the lining, and a special bar is placed at the outlet of the supply, where the spout itself is attached. Wall types are considered universal, they are ideal for both the shower and the sink in the kitchen or bathroom.

Easy to install and built-in faucets in the sink. Installation work is carried out quickly, since most washbasins are equipped with holes for mounting plumbing equipment.

The rarest are floor mixers, which are often installed only in large bathrooms. Their design has the form of a vertical rack, masking the water supply. Such devices are also suitable for filling large pools, and are placed before decorative flooring.

Cascading devices and design differ. They are available in various shapes: in the form of an oval or round plate, a rectangle or a square, they have curved or straight plates. In addition, the waterfall can be both high and shortened. A faucet with LED lighting is in great demand, its jet is beautifully illuminated and can change color depending on the temperature of the water supply. Faucets with shelves look beautiful in a modern interior, which serve not only as a decor item, but also allow you to conveniently place various hygiene items.

Control system and design

Speaking about the system of management and regulation, there is perhaps nothing particularly exclusive here. The easiest option is to install 2 half-turn knobs. The design is classic, recognizable for decades.

Now the most popular are joystick or lever controls. They are good not only from an aesthetic point of view, but are very simple and ergonomic in installation. You do not need to install additional valves, the joystick controller is based on the mixer itself.

The latest hit is deservedly considered a mixer with a thermostat. Such a system itself maintains the power and temperature of the flow. These designs can be both mechanical and electronic. The mechanics are considered more reliable and unpretentious, but the electronic programmable touch screen on the crane will conquer any, except for that sophisticated guest.

Since these designs are closer to elite plumbing, the flight of design ideas knows no limits here. Various materials can be used, but metal or glass is taken much more often.

A special highlight is the illumination of the tap itself and the jet.Moreover, in the backlit design, a temperature sensor is used, which changes the color of the water depending on its temperature. An interesting fact is that the backlight mechanism is completely autonomous. A mini hydro turbine is built into the faucet, which provides enough energy to operate the LEDs and the temperature sensor.

The video in this article demonstrates cascade mixers.

Tips for use and care

The cascade mixer not only pleases with its design, but also is not whimsical in operation. The only thing is that if its surface is made of ceramic or glass, it must be protected from mechanical shocks, since such materials are fragile and can quickly break or chip. In those models where the design has a backlight, its power source should be changed in a timely manner. It is recommended to clean the waterfall faucet with special detergents, which do not include alkalis and acids. Aggressive components can harm the outer coating of the product, causing it to deform.

Do not wash mixer parts with abrasive products. If they rub the product, then its appearance will deteriorate forever. It is best to give preference to liquid detergent solutions, they will gently clean both metal and ceramic or glass parts of the device. They are first applied to a rag or sponge, then gently wipe the structure.

Faucet aerator

Timo Cobra SV-10

Timo has been producing sanitary products for many years. The goods are developed and made in Finland, differ in high quality. The Cobra SV-10 model is popular among users. Features of this faucet aerator:

• Price: 481-990 rubles.
• Characteristics: two modes of operation - jet and watering can, brass material, chrome color.The eyeliner is rigid, connection diameter 1/2″. Designed for faucets with external thread. Warranty 5 years.
• Pros: simple installation, easy operation, excellent quality, several operating modes. If you get on a promotion or sale, you can buy goods relatively cheaply.
• Cons: not found.

Kaiser-M16

The aerator nozzle on the faucet from a German manufacturer is as simple as possible, but of high quality. Filter meshes do their job perfectly - they trap large impurities and mix water with air. The product is often found on sale, it is not scarce. Features of the Kaiser M16 model:

• Price: 46-59 p.
• Characteristics: small aerator made of brass, plated with chrome. Thread internal, 3/8″. Suitable for Kaiser 11055/50 faucets.
• Pros: laconic design, good quality, low cost.
• Cons: the aerator is designed for only two mixers, the meshes clog quickly.

Remer M28

The Italian holding has been producing high quality goods since 1965. Consumers fell in love with Remer sanitary ware due to its optimal prices and comfortable operation. The presented aerator is not designed for a kitchen faucet, but for a bathtub. Description of the device Remer M28 (model 84):

• Price: 239-277 rubles.
• Characteristics: the body of the nozzle is made of chrome-plated brass, the mesh material is stainless steel. The inner part is represented by heavy-duty innovative plastic. External thread M28.
• Pros: simple design, reliable aeration system, durable housing and high-quality internal filling, saves up to 15% of water consumption.
• Cons: not found.

Bathroom faucet installation

Most often, bathtubs are supplemented with such equipment, since in such a configuration the advantages that a cascade mixer has are most fully revealed. The installation provides for two installation options - directly into the wall or on the side. The first option does not depend on the design features of the bath and can be performed in almost any bathroom, if the communication equipment initially corresponds to the size of the hoses that a particular mixer can work with. If the dimensions match, the master only needs to fix the device block with the help of fasteners, while ensuring the connection of the liner.

Its nuances involve the installation of waterfall faucets to the side of the bathroom. On the one hand, the master may not take into account the basic plumbing connections, since the cascade mixer will be connected to the infrastructure of a particular bath. On the other hand, as follows from the previous condition, the accessory must match the technical parameters of a particular bath model, and this applies to both the connection and structural compliance.