Which water heater to choose: TOP 15 best units

The best storage water heaters with a tank volume of 50 l

Ballu BWH/S 50 Smart WiFi

• Price - from 13190 rubles.
• Volume - 50 l.
• Country of origin - China
• White color.
• Dimensions (WxHxD) - 93x43.4x25.3 cm.

Ballu BWH/S 50 Smart Wi Fi water heater

pros	Minuses
High quality	Above average cost
Flat panels for a compact footprint
Amazing design

Thermex Flat Plus Pro IF 50V (pro)

• Price - from 11440 rubles.
• Volume - 50 l.
• The country of origin is China.
• White color.
• Dimensions (WxHxD) - 23.9x86.5x45.2 cm.

Thermex Flat Plus Pro IF 50V (pro) water heater

pros	Minuses
Lightweight plastic body but durable	Quite high cost
Fully heats up in about an hour
Beautiful design

Electrolux EWH 50 Formax DL

• Price - from 10559 rubles.
• Volume - 50 l.
• The country of origin is China.
• White color.
• Dimensions (WxHxD) - 82.5 × 34.4 × 35 cm.

Electrolux EWH 50 Formax DL water heater

pros	Minuses
Powerful unit	Cost is higher than many competitors
Looks stylish
Quickly heats water up to 75 degrees

American Water Heater PROLine G-61-50T40-3NV

• Price - from 32990 rubles.
• Volume - 190 l.
• Country of origin - Italy.
• Color - grey.
• Dimensions (WxHxD) - 50.8x145x50.8 cm.

American Water Heater PROLine G-61-50T40-3NV water heater

pros	Minuses
Runs on gas	Bulky
Installed on the floor	Heats only up to 70 degrees
Large volume of water

Haier ES50V-R1(H)

• Price - 6900 rubles.
• Volume - 50 l.
• The country of origin is China.
• Color - grey.
• Dimensions (WxHxD) - 85x37x38 cm.

Haier ES50V-R1(H) water heater

pros	Minuses
Stylish design	Not
Heats contents faster than usual
Relatively compact version

Appliance power

Another important criterion is the power of the heating element.For 2019 models, this figure can range from one to 6-7 kW, while many units can be connected to both single- and three-phase power grids.

To exclude "knocking out" traffic jams, you need to carefully calculate the load on the electrical wiring in the apartment. If your network has been recently laid and is able to withstand significant loads, the power must be selected based on the desired rate of hot water production. As you understand, the more powerful the heating elements, the faster the liquid in the tank heats up. However, it is worth remembering that with an increase in power, the electricity bill also increases. So the “golden mean” is very important here. The optimal indicator is not higher than 2–2.5 kW, depending on the volume of the tank.

Choosing a water heater

The characteristic features of equipment of three types are given. Enough to initially select models. Try to look for products from world famous manufacturers. You don't have to run around bulging your eyes if you want to buy a water heater thermostat. Saving time is not the last argument, given the ratio of the cost of spare parts and products.

A couple of numbers for thought. Will help quantify water heaters:

1. 200 liters with a heating element power of 2 kW are heated for 8-9 hours, reaching a temperature of 70 degrees.
2. Water consumption when taking a shower is above 3.5 liters every minute.
3. One shower procedure takes 15 liters of water from men, 25 from women.
4. For satisfactory washing in the shower, you need an instantaneous water heater above 4 kW of power.
5. For a couple, a storage water heater with a capacity of 50 liters is suitable, for a family with a child - above 80 liters.
6. Try to avoid hanging water heaters on the walls yourself.It is necessary to more accurately calculate the strength of the wall, not every Russian engineer can do it.
7. You need to buy a thermostat for a water heater, try to take exactly the same. Manufacturers vary the maximum water temperature. Compare Bosch, Ariston - make sure.

Comprehend the above information, the selection process will seem easy. Perhaps you decide to buy a water heater for the aquarium. However, more about that another time.

Types of boilers

The main task of the boiler is to heat water, so manufacturers distinguish two types of water heaters, depending on the type of heating element (heater).

The heating element runs along the entire length of the water heater and evenly heats the liquid. Heating elements can be open (they are also called "wet") or in a special tube (more often they are called "dry"). We will talk about the difference between these two types a little later.

In boilers with an internal type of heating, they emit:

1. Electric models - their principle of operation is as follows: water is drawn into the tank and heated to a certain temperature, after which its temperature is maintained, as in a thermos.
2. Flow models - they are cut into the water supply system itself. The advantage of such boilers is that the water in them heats up instantly, the minus is that they are uneconomical.

It is also customary to divide boilers into floor and wall models, and by volume, for example, 10, 15, 50, 80, 100 and more liters.

The best water heaters with a volume of 100 liters

11. Timberk SWH RED1 100 V

The large water heater Timberk SWH RED1 100 V, like all devices with a tank of this size, is able to provide water for a large family. It heats water to a comfortable temperature in an hour and a half, is easy to install and configure operating modes, is very reliable for its price, and receives only positive feedback from users.

12. Timberk SWH FSQ1 100V

No less popular is another titanium Timberk - water heater SWH FSQ1 100V. It is designed in a rectangular flat shape, which is why some will find the heater bulky, and others like its modern look. Water SWH FSQ1 100V heats up quickly, works even at low pressure and does not create unnecessary noise. In addition, the water heater consumes electricity as economically as possible.

Summarizing

Despite the large assortment of cheap storage water heaters, you should not chase profits so as not to pay twice later. For example, water heaters "Timberk" and "Polaris" are somewhat more expensive than their counterparts, but they receive only positive feedback from users, and focus on the CIS as the main sales market in the first case and an extensive network of service centers around the world in the second, allow us to count prompt troubleshooting if they occur.

Similar content

• Geysers flowing household, sales leaders, characteristics and prices. Rating 2020.
• What are the best heating batteries for an apartment price. TOP 20
• Solid fuel boiler for heating a private house, which one is better to choose? Rating 2020
• The best water heated towel rails by reviews

Vaillant

The German company has been present on the market for more than 140 years and today has become a leader in the production of climate equipment. The company has representative offices in 20 countries, products are sold in 60 countries

Particular attention is paid to technology for the preparation of hot water. Boilers of indirect heating, electric and gas water heaters are produced

Electric speakers with a power of 3.5-.7 kW are compact in size and have a nice design. Geysers have a power of 17 to 24 kW, are equipped with piezo ignition or battery ignition, there are models with a modulating burner.

Gas storage water heaters are produced with a tank volume of 130-220 liters and receive piezo ignition. Geysers are presented in a wide range, have a power of 17 to 24 kW, equipped with a modulating burner. The cost of Vaillant equipment is above average.

The best models of water heaters

Among each type of water heaters several models can be distinguished with the best balance of cost and quality

First of all, you need to pay attention to the characteristics: the price in choice of such technology should not be paramount

Polaris FDRS-30V

The best option among storage water heaters of small capacity (30 liters). Despite the fact that this model is from a Chinese manufacturer, it has a considerable cost - about 10-15 thousand rubles. However, this is fully justified: the material of the tank is stainless steel, magnesium anode to protect against scale and corrosion. There is overheating protection, power and temperature control, accelerated heating.

Timberk SWH RS7 50V

Qualitative model of the Scandinavian company with a volume of 50 liters. The price is quite democratic - below 15 thousand rubles, while the ergonomic design will allow you to install it even with a lack of free space.

Also made of stainless steel, it raises the water temperature by 30 degrees in just over half an hour. Mechanical control with 3 different levels.The magnetic anode will ensure long-term operation of the device.

Hyundai H-DRS-80V-UI311

Decent model of the Korean manufacturer. The price / quality ratio is one of the best in its category of water heaters with a volume of 80 liters. Heating time is 60 minutes the highest temperature is 75 degrees.

Rectangular shape - takes up less space. Like the previous options, the material is stainless steel, the model is reliable, there is protection even against leaks and “dry” heating. The price does not exceed 13,000 rubles.

Model Hyundai H-DRS-80V-UI311

Disadvantages - 1 step of power and the impossibility of horizontal installation.

STIEBEL ELTRON DHC-E 12

One of the best flow-type water heaters of German production, which has proven its exceptional reliability in operation. The only downside is the very high price - about 30 thousand rubles. A power of 10 kW provides a flow rate of 5 liters per minute, which is not the most outstanding indicator, but it is enough for everyday needs. Another advantage is the ability to connect several points of water intake.

ATMOR BASIC 5

The cheapest representative of instantaneous water heaters is not, however, unreliable. Many budget models have a strong drawback: they explode a couple of months after installation, which indicates poor quality. But this model shows good results in operation. The consumption of a miniature apparatus is 3 liters per minute.

The disadvantages are the meager appearance of the front part and the small “range” of settings. But as an option for the kitchen, for example, it fits perfectly.

The choice of the type of water heater in each case is individual, so when buying, you need to take into account a number of parameters indicated in the article.

The best manufacturers of inexpensive water heaters

Most domestic homeowners are looking at budget models when buying water heaters. Many manufacturers supply reliable products to Russia at affordable prices. Experts selected several popular brands.

Zanussi

Rating: 4.8

The leader in the ranking of budget water heaters was the Italian company Zanussi. Initially, the company produced cookers, and after joining the well-known Electrolux concern, the range of household appliances expanded significantly. Electric water heaters are represented by both storage and flow models. A somewhat more modest assortment of gas water heaters is presented on the Russian market. All products are distinguished by their exquisite design, the manufacturer is constantly introducing new models, updating equipment and improving technologies.

According to experts, which are confirmed by consumer reviews, the brand is an example of high quality at an affordable price of products. Water heaters serve homeowners for a long time, economically consume energy through the use of innovative technologies in production.

• high quality;
• affordable price;
• durability;
• economy.

not detected.

Ariston

Rating: 4.7

Another Italian company is considered the world leader in the production of household appliances, heating and water heating equipment. Products under the Ariston brand are supplied to 150 countries around the world. The company supplies several lines of water heaters to Russia. Equipment that uses energy from gas combustion is widely represented. This category includes storage and flow heaters, indirect heating boilers.Not inferior in assortment and electrical appliances.

The consumer is offered accumulative models with different tank capacity (from 30 to 500 liters). You can choose stainless steel tanks or choose enameled containers with additional protection with silver ions. Thanks to effective thermal insulation, the heaters are economical and durable.

• rich assortment;
• high quality;
• profitability;
• safety.

there are no devices with "dry" heating elements.

Thermex

Rating: 4.7

The international corporation Thermex is on the third line of the rating. It specializes in the production of electric water heaters. Therefore, the Russian consumer is offered models with different tank sizes, differing in power, type and purpose. The manufacturer boasts a huge number of innovations. To create new products, there is a large scientific laboratory, which employs the best scientists from around the world.

Accumulative models are made of stainless steel or biological glassware. Magnesium anode provides additional protection against corrosion. Users appreciated the range of water heaters. That's just a lot of complaints come in for leaks.

5 Polaris FD IMF 50H

Consumers prefer storage appliances for apartments and houses for a tank volume of 50 liters, its optimal wall thickness, build quality of the structure, horizontal mounting. Here you will find the most requested and useful functionality. The power of 2.5 kW provides fast heating of water to the maximum temperature. This process is controlled by a special indicator. The external temperature regulator allows to regulate work of the device in the comfortable mode.A 50 liter stainless steel tank retains heat for a long time thanks to a special polyurethane foam layer.

The design is protected from leakage and overheating, the tank is covered by an 8-year warranty. The weak point of the model can be considered a copper heating element, which is prone to scale collection on its surface. The magnesium anode to protect the device did not receive negative reviews.

TOP 5 models with a tank up to 80 liters

These models are much more capacious and are in the greatest demand among consumers. Based on customer reviews, we have identified the 5 most popular units, the most balanced according to the "price-quality" criterion.

Ariston ABS VLS EVO PW

If cleanliness and quality of water are especially important to you, then this model will suit you perfectly. There are several systems that provide perfect cleaning. Besides, ABS VLS EVO PW is equipped with the "ECO" function and is able to prepare water at such t C, at which microbes simply have no chance of life.

Pros:

• perfect water purification system;
• ECO mode;
• accelerated heating
• protective automation ABS 2.0, which controls all processes;
• there is a magnesium anode;
• not too high price, from $200.

Customers love the design and functionality. There is enough water for more than three, it heats the water quickly, because there are already two heating elements. The build quality is good. Cons have not yet been identified.

Electrolux EWH 80 Formax

Quite an interesting model from the well-known company "Electrolux" (Sweden). Quite capacious tank with enamel coating, which, in our opinion, only adds to its advantages. The boiler is equipped with a tubular heating element and is capable of heating water up to 75C.

Pros:

• nice design;
• flat tank, which reduces its dimensions;
• equipped with a safety valve;
• dry heater;
• keeps water warm for a long time;
• simple setup;
• 2 independent heating elements;
• together with the boiler there are fastenings (2 anchors).

Buyers love the design, and that it can be mounted horizontally. Looks good - modern and compact. Heats up quickly. Temperature control - mechanical handle on the case, there is an Eco-mode. The tank heated to the maximum is enough to take a bath. No cons found.

Gorenje Otg 80 Sl B6

This model was named by consumers as one of the best water heaters of 2018-2019. One of the positive qualities of this boiler is that it heats water much fasterthan other models with similar performance. At the same time, the water is heated to 75C, and the power is only 2 kW.

Pros:

• fast heating;
• profitability;
• good protection (there is a thermostat, check and protective valves);
• the design provides 2 heating elements;
• the inner walls are coated with enamel, which reduces the likelihood of corrosion;
• there is a magnesium anode;
• simple mechanical control;
• price from $185.

Minuses:

• quite a lot of weight, just over 30 kg;
• not too convenient to drain the water;
• The kit does not include a drain hose.

Thermex Sprint 80 Spr-V

This hot water unit also differs in the speed of obtaining hot water. To do this, the "Turbo" mode is provided here, which translates the boiler to maximum power. The water tank has a glass-ceramic coating. Maximum t ° C of hot water - 75 ° C, power 2.5 kW.

Advantages:

• there is a magnesium anti-corrosion anode;
• good protection system;
• compact;
• interesting design.

Flaws:

• during heating, water sometimes drips through the pressure relief valve;
• the price could be lower, from $210.

Timberk SWH FSM3 80 VH

It compares favorably with heaters from other companies in its shape: a “flat” device is much easier to “stick” into small bathrooms and kitchens. It has all the necessary protective functions, and the tank is made of high quality stainless steel. Weight without water 16.8 kg.

Pros:

• tubular heating element 2.5 kW has power adjustment;
• reliability;
• there is an anti-corrosion anode;
• retains heat well;
• fast water heating.

Minuses:

• the power cord heats up slightly;
• cost from $200.

The best manufacturers of inexpensive models

Budget water heaters are very much in demand in the modern market. Low power models are especially popular. Most often they are bought for installation in the country or as an additional device in case the hot water is turned off. In such cases, the acquisition of expensive models is not always justified. Here are some of the most popular companies that have good budget-class models in their assortment.

Thermex

This manufacturer is often associated by consumers with models of an affordable price range. Although you can also find very expensive Thermex boilers on store shelves. Almost all models have reliable corrosion protection and a built-in magnesium anode. The body of the latest units is made of stainless steel or coated with super-innovative bio-glass porcelain. The brand offers a fairly wide range of models to choose from - from 10 to 300 liters. The design can also be customized to your liking. Both traditional cylindrical appliances and modern flat rectangular boilers are available.

Advantages:

• wide choice of tank volume;
• simple and fast installation;
• excellent choice of compact models;
• decent technical equipment;
• the price tag is unbelievable.

Flaws:

• the quality of materials is “budgetary”;
• periodically there are complaints of leaks.

Novatec

This storage water heater is produced in Ukraine and complies with international standards ISO 9001. A reliable and inexpensive unit, which was appreciated by users in more than 30 countries around the world.

Pros:

• ease of installation;
• ease of use;
• versatility and a wide range of models;
• cost-effectiveness through the use of the latest technologies;
• oversized magnesium anode for better corrosion resistance;
• internal coating of a double layer of enamel;
• the presence of a safety valve for safe use;
• "AntiMix" system that prevents mixing of water flows, which leads to even greater savings in electrical energy;
• affordable cost.

Minuses:

the appearance of the models is somewhat the same.

Ariston

If you decide to buy a budget boiler, you can choose an excellent model from this brand. Although Ariston also has very expensive models, the quality of inexpensive water heaters is really high here. This Italian manufacturer values ​​\u200b\u200bits name and responsibly treats the production of units of any price category.

In Russia, this is perhaps the most popular brand. A wide range of models is available to customers, with a capacity from 10 to more than 100 liters. All units are distinguished by a high-quality protection system, attractive appearance and clear control. Most tanks are made of stainless steel. Many popular models have a special internal coating with silver ions that kill pathogens.

Advantages:

• more than enough choice;
• wide functionality;
• ease of installation;
• repairs can be made at common Indesit service centers;
• not overly expensive.

Flaws:

• to maintain a long-term warranty on the tank, you need to change the magnesium anode annually;
• many consumers complain about the lack of models with dry heating elements.

Garanterm

One of the leaders in the production of budget models. This manufacturer earlier than others applied a special technology of twin tanks. Tanks made of stainless steel are connected in one body with cold welding aid.

Tanks "Garanterm" in accordance with its name have a longer warranty period, do not fade at the seams and are insulated with low thermal conductivity polyurethane.

Pros:

• improved tank design;
• increased resistance to corrosion;
• automatic conveyor assembly minimizes waste;
• smooth and even enamel coating inside the tank;
• production has a test center using thermal shock;
• all boilers pass acid tests;
• a control LED diode is used;
• affordable unit price.

Minuses:

• in some cases, the quality of the heating element leaves much to be desired;
• the indicator shows only the degree of heating, and not the number of degrees.

2 Ariston SGA 200

Ariston SGA 200 can be considered the unofficial leader among all inexpensive and capacious gas boilers. As often happens, the objective assessment of the model on the Internet is blurred under the pressure of angry comments from deceived users that have nothing to do with the real state of affairs. The vast majority of buyers are somehow interested in buying this device, and here's why.

The actual volume of Ariston SGA 200 is 195 liters, which, under the influence of a thermal power of 8.65 kW, are heated to 75 degrees. Additionally, it is possible to work on liquefied gas, installed gas control system and piezo ignition. Connecting diameters are standard, 0.75 inches, so the only problem with installation will be the placement process itself. As a result, the models have something to please the owners.

How to choose water heaters for a summer residence

When choosing a water heater, you should decide where it will be installed and how often it is planned to be used. It is better to stay on small-sized models. For a country option, the volume of the tank does not have to be large. You can consider the design of a flat storage electric water heater 10 liters. Round and cylindrical devices take up a lot of space. But it should be borne in mind that flat models have small heat-saving qualities. This option is justified for infrequent use, as it takes up little space and fits well into small niches or cabinets.

Compact design for a summer residence

Flat water heaters have a depth in the range of 23-28 cm. At the same time, the device quickly heats up the water. Also, in some models there are special dividers that can regulate the mixing of water of different temperatures.

It is important to take into account some of the disadvantages of flat devices. They have a shorter lifespan

In addition, the design assumes the presence of two heating elements, the installation of which increases the number of connections. The thermal insulation layer is not as thick as in standard designs.

Flat models do not take up much space

To choose the right design, you must consider the following parameters:

• the volume of the tank depends on the number of people who will use it, as well as on the required volume of water;
• the volume of the inner coating can be made of stainless steel or enamel;
• the power indicator affects the rate of water heating;
• dimensions and type of fastening;
• manufacturer's choice.

It should be borne in mind that during operation, any heaters are subjected to destructive effects from aggressive components, sudden changes in temperature and high pressure.

How to choose the volume of the tank: how the number of people and needs affect

The choice of a water heater with a tank depends on many parameters.

It is important that the design meets all needs and is also an economical solution. The minimum tank size is 10 liters and the maximum is 150

You can choose from the following designs:

• a capacity of 10 liters is enough for household needs, such as washing dishes and for taking a shower by one person. But such a device warms up quickly, and also consumes a small amount of electricity;
• for two people, a 30 liter model is suitable, but you will need to wait a bit until the container warms up. To fill the bath of this volume is not enough, since it will take several hours to fill;
• the volume of 50 liters is suitable for the needs of a small family. These are the most popular models;
• with an 80 liter electric water heater tank, you can even take a bath. At the same time, this volume is not enough for a spacious jacuzzi;
• products from 100 liters are suitable for large families. But such devices have significant weight and large dimensions.And for the installation of installations of 150 liters, it is worth checking whether the supporting structures can withstand such a weight.

The required volume of the tank is selected individually

Features of choice by power level

In all electrical boilers for heating water accumulative type accommodates 1 or pair of heaters. And these details can have different power parameters. In small tanks, 1 heating element is installed. At the same time, its power is 1 kW.

And electric storage water heaters of 50 liters are equipped with a mechanism with a value of 1.5 kW. Models with a capacity of approximately 100 liters are equipped with devices with values ​​​​of 2-2.5 kW.

The floor version of the equipment has more power

The nuances of choosing the type of control

The electronic control method is known to be particularly advantageous. It has wonderful decorative properties and ease of use. At the same time, the price of an electric flat water heater of 30 liters of storage type can be several times higher than that of a device with mechanical settings.

With electric control, the desired indicators are set once, and then they do not need to be adjusted every day. Remember that the failure of at least one element can lead to the failure of the entire equipment.

Ease of electronic control

What are the advantages of anti-corrosion protection

Modern models have a special protective layer that prevents corrosion and damage to the structure.

Tanks can be:

• stainless;
• titanium;
• enamelled.

The surfaces inside the tanks come into regular contact with liquid, causing rust to form. Titanium sputtering or glass porcelain is used as a coating.The glass-ceramic version does not tolerate temperature fluctuations well, which causes cracks.

Premium class

For those who do not compromise and are accustomed to buying the best, we present the top three companies that produce top-class professional water heaters.

Stiebel Eltron

The German company has its own production of water heating equipment with control of each device. The accuracy of heating and the ability to work with "hard water" are ensured. Titanium anodes are used. The volume of water can vary from 5 to 400 liters (on industrial models).

Advantages:

• high quality and safety;
• long term of work;
• wide model range.

Flaws:

• high price;
• only electrical and combined connection is shown.

Criteria for choosing a device for heating water

After analyzing the water heaters, you can choose which one suits you:

1. If you need a device for heating water during a breakdown in the boiler room, then it is better to use an electric instantaneous water heater.
2. Do you need a constant source of hot water in a large private house? So, a storage gas boiler is suitable.
3. If the apartment has old wiring, and you are not going to change it, and there is nowhere to put the storage device, then it is rational to use a flow device with low power.
4. Any chosen type of device should be purchased from the best manufacturers that provide a guarantee.

Storage water heater: device, principle of operation, strengths and weaknesses

An electric storage water heater (boiler) is a heat-insulating tank for heating water to a certain temperature (in the range from 35 to 85 degrees), made of anti-corrosion materials (copper, more often steel).

Due to its design, it is able to keep water warm for several hours. After it cools down, the boiler automatically turns on to heat it up and turns off again when a certain temperature is reached, which is very practical and economical. Some models of boilers are equipped with additional elements or functions:

1. Antibacterial coating.
2. Rapid water heating.
3. Management in the manual/automated mode.

Consider the key advantages and disadvantages of storage type heaters.

The benefits include:

• low power (up to 2 kW) - only a stationary outlet will be enough to power the device;
• the ability to retain heat for a long time (even when the electricity is turned off);
• one boiler serves all water intake points in the apartment at the same time;
• ability to function even with low water pressure.

The water heater will provide you with a constant supply of hot water

To the disadvantages:

• impressive dimensions (in most cases);
• installation complexity;
• a limited amount of water, when using which the next "portion" will have to wait several hours;
• with regular use of the device, a constant replacement of the anode protecting the tank from corrosion is required.