Which heater is better to choose for a garage: a comparative review of 4 different options

The best gas heaters for the garage

Heaters can be connected to cylinders or a gas pipe. This is practical for garages where there is no electricity. Still such devices are distinguished by increased power, designed for an area of ​​​​20-60 m².

Ballu BIGH-55

Rating: 4.9

In first place in the product category from Ballu. The BIGH-55 heater has a vertical design on wheels in a closed casing.The front panel has an output heating ceramic element, covered with stainless grating. The heater is capable work like from cylinder installed at the rear, and from the gas pipe. Two handles are provided on the sides, if you need to lift the device for rearrangement through the threshold or steps. Owners in the reviews like the fact that when the heater falls, the gas supply is turned off automatically, protecting the garage from fire. During an hour of operation, the heater burns only 300 g of gas.

The experts considered heater best for large garages for several cars with an area of ​​60 m². If the unit is placed in the middle, then the whole building will be warm. Mechanical control with a thermostat allows you to set up automatic operation with power control from 1.5 to 4.2 kW.

• comfortable ignition with a button;
• aesthetic appearance;
• protective systems are triggered in case of capsizing or gas leakage;
• does not depend on the power supply.

• large dimensions 36x42x72 cm;
• weight without cylinder 8.4 kg;
• when installing the cylinder, you need to be careful not to tear off the sensor tubes.

Timberk TGH 4200 SM1

Rating: 4.8

The gas type heater from Timberk has dimensions of 30x38x55 cm and moves on four wheels. The front panel provides an outlet for a ceramic heating element, protected by a steel grate. The controls are located on top. You can heat the garage in one of three modes with a power of 1.4-4.2 kW. For an hour of operation, the heater burns 310 g of gas, so a 27-liter cylinder is enough for 80 hours of continuous operation. If necessary, the unit can be lifted by the handles and moved. The cylinder will not fall out, as it is fixed with a steel clamp.The heater is liked in the reviews by easy start - to turn it on, you need to turn valve on the cylinder and press the piezo ignition button.

This gas heater is distinguished by the presence of a gearbox in the kit. To heat the garage, all that remains is to purchase and fill a gas cylinder.

• wheels for rearrangement;
• economical consumption 310 g/h;
• rollover shutdown;
• suitable for commercial use when heating a service station garage;
• control of gas leakage and CO2 output.

• high price;
• weight 6.3 kg;
• When turned on, it smells a little like gas.

TOURIST MINI AFRICA

Rating: 4.7

The compact model from Tourist completes the category of gas-type heaters for the garage. Its name "Mini Africa" ​​is fully true - a few minutes after switching on, it will be warm in a room with an area of ​​​​12 m². The unit is powered by a 220 ml portable cartridge installed in the back of the case. Outside, there are no hoses to tangle with, which buyers like in the reviews. Mechanical control of the combustion power is provided with a maximum heat release rate of 1.2 kW. The heating element is started by pressing the piezo ignition switch. Plastic feet do not slip on iron or tiles, and also prevent heat transfer to floor materials.

Experts noted this heater as the most compact in the category and economical. Its dimensions are only 13x13x26 cm, so it is easy to place it even in the car, when working with an electrician. For an hour of operation, the heater burns 100 g of gas. The manufacturer claims that if you set the economy mode, then from a 220 g can, the device will work continuously for 5-6 hours.

View overview

The evolution of heat guns went in three main directions, determined due to the characteristics of the main energy carrier. Heaters could be kerosene, diesel fuel, gas appeared a little later. Electric heat guns have become a separate area.

Electrical

An electric gun is the most common and easy-to-use type of heat gun. The availability of electricity has made this variety the most popular. The simplicity of the design plays in favor of the electric gun. To start it up, all you need is a power connection.

It is important to determine in advance the power consumption, since there are electric heaters that need to be connected to a three-phase network of 340 volts, and they can not be connected everywhere. Typically, a 3-5 kW unit is used to heat a standard garage.

These heaters are equipped with switches that allow you to set the intensity of heating: from a simple fan to maximum power. The disadvantage of this type of heaters is the rather high cost of energy consumed, the need to install large-section wiring, otherwise there is a danger that the power grid will not withstand the increased voltage.

Diesel

These heat guns are considered the most powerful. Indeed, even very large rooms can warm up such units for a long time. The most common cable is needed for connecting to the mains, because electricity will be consumed only by the rotation of the fan, while heating is carried out by burning diesel fuel. And here comes the main problem of this type of heat guns - toxic gases.

In no case should such heating equipment be turned on in rooms with difficult ventilation.This problem is especially relevant for very efficient direct heating heat guns. In this case, the air flow is heated by the flame of burning fuel and all combustion products are thus thrown directly into the room. More often, such heat guns are used to quickly warm up open boxes with a constant supply of fresh air.

Diesel heat guns of indirect heating are somewhat safer. A combustible mixture of air and diesel fuel is injected into a special chamber, where combustion takes place, the air flow is heated from the heated surface of the chamber. It is clear that the efficiency of such a heater is somewhat lower, but this makes it possible to remove gases from the combustion chamber through a special gas exhaust system from the room to the outside.

Gas

The most modern heat guns are gas. These units also require connection to a standard electrical outlet for the fan motor to run. A relatively inexpensive fuel is used to heat the air - a household mixture of propane and butane from cylinders or from a gas network. Gas heat guns are very efficient heating equipment with an efficiency of almost 100%.

The disadvantage of this type of heat guns may be the need to connect additional gas equipment (hose, cylinder, etc.) in addition to the electrical cable. In addition, when operating gas heaters, there is always a danger carbon monoxide poisoning, imperceptibly accumulating in an unventilated room. Therefore, for normal, long-term and safe operation of the device, you will either have to leave the garage door open or periodically open it.

The third option is installation of a special forced ventilation system providing a constant supply of fresh air. Naturally, in any case, part of the heat will constantly go to heat cold fresh air, which significantly increases gas consumption.

With what power source to take a gun?

Heat guns can have three power sources, each of which is useful in certain conditions:

Electrical. The most popular type of devices in which a heating element or a spiral acts as a heating element. Electric heat guns do not emit exhaust gases, so they can be safely used indoors. They are easy to use and can work for a long time. However, for devices with a power of more than 5 kW, you will need to connect to power outlets, and the most powerful three-phase network. If there is an outlet in the room that you are going to heat, then it is best to take an electric model.

Diesel. The thermal power of diesel units is much higher than that of electric ones. They can also be used in power outages such as construction sites. However, diesel devices emit combustion products into the atmosphere, so they need to be additionally vented from the room, or use in open areas, for example, in a building under construction. If you are engaged in the construction of buildings and structures and often have to work in rooms larger than 100 m2, then the diesel model will be the preferred option.

Gas. Gas devices have a greater thermal power than diesel ones with the same dimensions and weight.They are also somewhat cheaper than diesel units (within the same brand)

However, for their operation, it is necessary to connect either to the central line or to the cylinder, which will require the participation of a specialist
It is also important to pay special attention to security issues. A gas gun can be bought for a garage if ventilation is well organized in it.
Otherwise, it is better to give preference to the electric model.

For domestic use at home, it is best to take an electric heat gun, since, other things being equal, it is cheaper than gas and diesel ones, and there is always an outlet in the garage. Therefore, we included electric models in our rating of heat guns.

Economical garage heater

Among all the options, there are 3 groups of heaters: electric, gas, infrared. The most economical options are gas and infrared heaters. Gas heaters do not require a lot of money for fuel, but they should be installed by a professional.

Advantages of gas equipment:

• Rapid heating of the room;
• No power required;
• Economical;
• Mobile.

Ceramic models have the best safety. If there is no combustion, the gas supply stops.. Moreover, the device is durable, as it is made of stainless steel.

The infrared installation is considered the most economical. Usually such a system mounted on the ceiling. You should responsibly approach the installation site of the device.

A diesel boiler or a cannon is a fairly efficient heating system. Guns are used more often, but require good ventilation in the room. The system is safe, if the device overheats, it will automatically turn off.

Convector - efficiency and quality

Fast and efficient heating of the garage with household convectors is the choice of most car owners. The advantages of the convector are much greater than the disadvantages:

• the colder the air entering the convector from below, the higher the heat transfer of the heater;
• it is possible to install both electric and gas convectors;
• the heater body does not heat up, the temperature is not higher than 65 degrees;
• full guarantee of fire safety;
• uniform heating of the entire garage;
• automation allows you to maintain the desired temperature and saves energy consumption;
• The heater is easy to install in any convenient place in the garage.

The only disadvantage of such a convector is that it will have to be cleaned often, since there is always a lot of dust in the garage.

Important. At gas convector installation be sure to equip the room with good ventilation

Classification by type of heating element:

• needle type heating element - can not be used in rooms with high humidity, since the heating element is practically not protected from water, dust and dirt;
• tubular type of heating element - waterproof, there is protection against overheating. A budget solution for a small garage, but it heats up for a long time;
• monolithic type of heating element - there are no welds in the body of such a heating element, therefore the heating element is reliably protected from water and shocks. Quickly warms up the garage and can be set to automatically adjust the desired temperature.

How to roughly calculate the cost of electricity when choosing a convector in the garage? For an insulated garage of 10 square meters, you need convector for 1 kW, this is quite enough.

Options for thermostats in convectors:

• mechanical regulator - it is impossible to accurately set the temperature control, it is not recommended to choose such convectors in the garage;
• electronic regulator - there is a timer and a temperature sensor, economical and safe;
• programmable adjustment - from two to four temperature programs, it is possible to set individual parameters. The best choice, but the price is higher than the electronic regulator.

If you combine an infrared heater above the hood and a programmable convector, then in the garage will always be a comfortable temperature both for the owner and for the car.

Oil coolers - a combination of mobility and productivity

Outwardly, this type of device resembles a conventional sectional cast-iron battery. However, in fact, the body of such a radiator is made of lighter steel, which heats up many times faster. Most often, oil coolers have wheels for easy transportation. All seams are sealed. Inside - mineral and environmentally friendly oil, which is heated almost to a boil.

Advantages:

• democratic value;
• environmental friendliness;
• device reliability;
• noiselessness;
• ease of installation and use of the device.

Often, such devices become drying for barely damp items of clothing - socks, gloves, handkerchiefs. But you should be careful - it heats up to such an extent that it will easily leave a burn on the skin.

Flaws:

• slow heating;
• hot body;
• takes up quite a lot of space.

Nevertheless, if such a device suits you, let's find out which oil coolers are bought most often for houses and apartments?

Polaris CR0512B

The average price tag is 2500 rubles. Available in only one color - black. There is a power adjustment in three positions - 500, 700 and 1200 watts. Has 5 sections. The control system is mechanical. There is a switch with light indication.Installed on the floor. Among the protective functions, shutdown in case of overheating. Creates a fireplace effect. The case has a compartment for the cord, there are wheels and handle for ease of movement.

Advantages:

• Compact.
• Temperature controller in the range of three modes.
• Economical electricity consumption.
• Low price.
• Protective system against overheating.
• Modern stylish design.

Flaws:

• Heats up a small area.
• Short power cord.

Royal Clima ROR-C7-1500M Catania

The average price tag is similar to the previous one - 2500 rubles. Available in a choice of white and grey. Three-stage adjustment in the range of 600, 900, 1500 watts. Available heating area 20 sq.m. Has 7 sections. There is a thermostat. The control system is mechanical. Installed on the floor. In protective functions, shutdown in case of overheating. Creates a fireplace effect. The case has a wire compartment. For transportation, a handle is used and wheels are provided.

Advantages:

• budget cost.
• Nice design.
• Convenient carrying handle.
• Place for winding the cord.
• Large area available for heating.

Flaws:

Not detected.

Timberk TOR 21.2009 BC/BCL

The average price tag is 3000 rubles. Sold in white and black. There is power adjustment. Power of work is 2000 W. Available heating area 24 sq.m. Designed for 9 sections. There is a thermostat. The control system is mechanical. Floor installation. There are protective systems against frost and overheating, a good choice for giving. Creates a fireplace effect. The case has a compartment for the cord. Wheels and handle for transport.

Advantages:

• Nice design.
• Fast heating.
• Economical consumption of electricity.
• Convenient control system.
• Warms up a large room.

Flaws:

A high percentage of breakdowns.

Hyundai H-HO9-09-UI848

The average price tag is 2500 rubles. There is a power adjustment. Power of work is 2000 W. Available heating area 20 sq.m. Number of sections - 9. Available thermostat. The control system is mechanical. There is an adjustment temperature and switch with light indication. Floor installation. Creates a fireplace effect. There is a compartment for winding the wire. Wheels and handle for transport.

Advantages:

• High power.
• Convenient control system.
• Protective systems.
• Convenient cable winder.
• Large available heating power.

Flaws:

Inconvenient handle for switching power.

Ballu BOH/ST-11

The average price tag is 3300 rubles. Sold in white only. There is a power adjustment. Power of work is 2200 W. The area available for heating is 27 sq.m. The design has 11 sections. There is a thermostat. The control system is mechanical. There is a temperature controller and a switch with light indication. Installed on the floor. Protective system against overheating. Creates a fireplace effect. Cord storage is provided with a compartment, transport wheels and a handle.

Advantages:

• The presence of temperature control in three modes.
• Protective systems.
• Large heated area.
• Housing with anti-corrosion coating.

Flaws:

During operation, it produces noticeable clicks and crackles.

Types of gas garage heaters

A wide range of gas-powered appliances is presented on the heating equipment market. They are perfect for heating even the coldest garages and basements.These devices are divided according to the principle of operation.

Catalytic and infrared heater

As mentioned above, the catalytic heater works due to the reaction of the interaction of liquefied gas with a chemical component. At the same time, the whole process is absolutely silent, so many people use such units even at night. These devices are considered safe and have several advantages:

• compact size;
• no need for ventilation;
• work without electricity;
• economical fuel consumption.

Gas-type catalytic heaters can be adjusted in power with a special toggle switch

The infrared heater is intended solely for the transfer of heat to objects in the room. This type of heating does not change the air temperature, however, it has quite a noticeable heat transfer. The features of the unit include:

• ceramic and metal heaters are used;
• have an extensive range - 5-6 m;
• have slots for connecting individual cylinders;
• one fuel source can have a volume of up to 27 liters.

Ceramic heaters most often have a built-in storage tank for fuel.

ON A NOTE! (click to find out)

ON A NOTE!

A portable infrared heater can be connected to centralized heating system through a flexible hose. However, this type of heating requires a permit.

Heat gun and convector

For heating non-residential premises often use heat guns of different capacities. Similar gas units have a number advantages:

• quickly heat the room;
• they heat many times more economically than other options for gas equipment;
• equipped with sensors for recording the concentration of carbon dioxide.

Units with two nozzles for radiation of thermal energy can be directed in different directions

This type of equipment can be transferred from one room to another, since a separate cylinder is connected as a fuel source.

Gas guns can be connected to fuel cylinders that are used in the household

For a small garage, you can use compact convector models. They have a small fuel tank. Typically, these devices run on propane. A fully filled fuel source lasts for several days. The advantages include:

• convenient piezo ignition;
• a light weight;
• the presence of an overpressure valve;
• possibility of installation on any horizontal surface.

Devices can be combined, working both from gas and from electricity

Gas ovens for the garage

These devices work on the same principle as traditional heaters. Many of them require the mandatory installation of a chimney. Of the advantages of such a unit, the possibility of quickly heating the room is distinguished. It moves freely and is easy to store. We must not forget that this equipment is very fire hazardous. When choosing such units, it is necessary to know exactly the area of ​​\u200b\u200bthe room in which they will be used.

It is interesting: garage oven with your own hands - the best 4-re homemade variant

Varieties

There are mobile gas heaters for summer cottages several varieties.

Infrared

Works on the principle of converting heat generated when burning fuel, into infrared radiation.

A burner, a valve, a combustion regulator and a heated panel are placed in a metal case.She is that emitter. The panel can be made of metal pipe, mesh, perforated sheet, ceramic, etc. When heated to 700-900 degrees, the panel emits infrared waves. They give off thermal energy not to the air, but to the surrounding objects. From them, the air gradually warms up. According to this principle working infrared gas heater.

This variant of direct heating, when combustion products are discharged inside rather than outside, is optimal for short-term use in well-ventilated areas.

If it is possible to install an indirect heating heater, it is better to buy it.

Infrared gas heater for giving with a cylinder.

Ceramic

According to the method of heat transfer, the gas ceramic heater belongs to the infrared type. The main element of the heater is a ceramic insert or panel. It serves to convert combustion energy into thermal radiation.

If it is possible to connect to a portable cylinder, the device will work autonomously. This is convenient, especially for owners of country houses located where there is no infrastructure yet, or it is turned off for the winter months.

To turn on the heater without automatic ignition, you need to bring the flame from a match or lighter to the top of the ceramic panel. It is strictly forbidden to kindle a flame near the nozzle.

Ceramic gas heater for giving with a cylinder.

Catalytic

One of the safest heating devices is catalytic gas heater. The main difference from other types of similar devices is the flameless combustion of fuel and the release of heat during the oxidation reaction.Since the gas heat source works without fire, combustion products are not released into the room air.

The main element is a catalytic or catalyst plate made of fiberglass, with the addition of platinum. When fuel hits its surface, an oxidative reaction begins, during which thermal energy is released.

The consumer heats the house, but does not receive the negative side effects that occur during conventional combustion, such as burning oxygen in the air, saturation with carbon dioxide. A catalytic gas heater in this regard is much safer and more environmentally friendly. These are the main advantages of such a device, judging by the user reviews. It also has disadvantages, the main of which can be considered the cost. The catalytic plate develops its resource after 2500 hours of operation. It costs almost as much to replace it as to buy a new heating source.

It is more expedient to replace the unit that has exhausted its resource with a new one, rather than buying a plate for it.

Catalytic gas heater for giving with a cylinder.

Portable

Portable gas heaters for heating will be useful in field conditions, in buildings not equipped with any type of heating. In the back of the device is a small gas cylinder with a volume of 200 ml to 3 liters. The fuel consumption of such a heater is 100-200 g / h, the power is not more than 1.5 kW / h. A portable heat source works like infrared. With the help of piezo ignition, a flame appears in the burner, which heats the ceramic plate. Radiation from it provides the necessary heat.

Relatively inexpensive, cheap, light, convenient, designed for heating small rooms up to 15 m2, garages, tents.

Portable gas heater for giving with a cylinder.

Benefits of using IR heaters

A significant variety of power characteristics of the lines of infrared emitters allows you to make a choice for a room of any volume.

When installing such a heater as a ceiling heater, you should take into account:

1. The minimum distance in height to the head of a person standing should not be less than 0.7 meters,
   with a minimum power of the device of about 800 watts.
2. With its increase, the distance should also be increased, at least 1.5 - 2 meters.

from 25 to 100 W, open coil.

However, the new generation of infrared thermal devices is completely devoid of such shortcomings. A special quartz or carbon lamp - the emitter, is reliably protected by a sealed tube made of durable quartz glass. Air has been removed from its interior. The lamp is completely safe.
The period of continuous operation of the simplest emitters in the maximum mode is at least 1.5 years.
Even more consistent with the natural level of radiation of the human body, a carbon lamp manufactured using nanotechnology operates in the range 5 to 20 microns.

Radiator heaters of this type are completely unique, they do not have a magnetic field,
and when turned on, like all IR heaters, they immediately go into thermal mode. As in residential areas, the use of radiant heating in the garage has significant advantages.
As already mentioned, after switching on, the operating mode is reached in 10-30 seconds. The operation of all devices of this type is silent.

Economy of operation
increases from 30 to 60%, since the surfaces are directly heated, the areas that do not fall into the zone of radiant energy do not heat up.So you can save a lot on heating only the right areas: a rack with tools, a side cart, etc.
If you place the heater on the ceiling, the floor in the garage, the car and all objects will receive an analogue of sunlight, which, among other things, helps to eliminate fungal infections.
and mold in the garage, where it is quite damp.

Emitters on a rack

If the emitter has a stand and mount, it can also be used to create conditions for outdoor work.
A kind of infrared heating - special panels generally allow them to sheathe walls and ceilings. Their low power consumption, absolute safety
for car paintwork, harmlessness and environmental friendliness, combined with a service life of 25 years,
make them ideal for use in garage heating. Even one panel placed under the hood at the rate of 50 W / 1kv. m, will provide preliminary safe warming up of the motor, saving precious time
to its owner.

infrared

Thermal energy is transmitted mainly by radiant energy, infrared radiation emanating from the heater. At the same time, it is not the air that is heated in the first place, but objects in the room or the area of ​​​​the heater. The radiation is easily directed with the help of mirrors and reflectors in the right direction, without wasting heat in vain. Space heating is not accompanied by active air convection, which is excellent even for open areas and rooms with active ventilation.

The source of radiation can be both an open flame and surfaces heated to a high temperature.So the following types of infrared gas heaters have become widespread:

• ceramic;
• catalytic combustion.

At the same time, these two types differ in the way gas is burned. In ceramic, the combustion process takes place inside a protected chamber. In catalytic combustion open type over the entire working surface, and additional protection is required. However, the catalytic burner is often made in the form of a ceramic plate.

Ceramic

The preparation of the gas-air mixture and its combustion takes place in an isolated chamber, preventing the flame from escaping to the outside. Most of the heat generated is transferred to the ceramic plate with a large surface area. After that, energy is emitted from the outside of the plate in the form of infrared waves. The composition of the ceramic plate and its shape are selected in such a way as to increase the proportion of thermal radiation and reduce the surface temperature of the heater.

The purpose of creating ceramic infrared heaters was to reduce the risks associated with the use of flames and explosive gases. The combustion chamber is reliably protected and equipped with additional protective equipment that will shut off the gas supply in any emergency situations. At best, there are the following protection components:

• Heater temperature control. Turning off the gas supply when the plate surface overheats or, conversely, if for some reason the flame in the combustion chamber goes out.
• Position sensor. If the heater tips over, turn it off immediately. In many models, automation is responsible for this, which will turn off the gas supply if the position of the heater is unacceptably changed.
• CO2 sensor.Switching off the heater if carbon dioxide accumulates in the room above the allowable limit.

Ceramic gas heaters cover the entire power range from 0.5 to 15 kW available for portable devices, they are safe and reliable in operation. However, their cost is higher than catalytic analogs.

Advantages include the possibility removal of combustion products outside the room, which is facilitated by a closed combustion chamber. Some models have an outlet, to which, if necessary, a chimney made of heat-resistant material, such as an aluminum corrugated pipe, is connected.

catalytic

In this type of heaters there is no flame, the gas is not burned in the usual sense, but is actively oxidized by oxygen with the release of heat. Such a reaction is possible only in the presence of a catalyst, in the role of which platinum or other elements of the platinum group are used.

A special lamellar grating made of refractory material (steel, ceramics) is coated with a catalyst. The oxidation reaction starts only after the catalyst plate has warmed up well, and gas is constantly supplied to support the process. Oxidation of the gas occurs only directly near the surface with the applied catalyst, which prevents the occurrence of active flames.

The heat generated by the heater is mostly distributed by infrared radiation. However, an active convection process is also formed, since the overheated oxidation products remain inside the room and mix with the air.

Advantages of a catalytic heater:

• Compact dimensions and the lowest weight among gas heaters.
• Extremely simple design.
• The ability to orient the heater with a wide angle of rotation.
• Affordable cost.

Flaws:

Active oxidation is not much different from open combustion in terms of the release of harmful combustion products.
The high surface temperature of the catalyst, if handled carelessly, increases the risk of fire, therefore, increased attention and additional protection of the heater is required.

Benefits of an infrared garage heater

Infrared heaters are often used for heating technical rooms. The operation of the system is based on the current that passes through special spirals, creating long-wave radiation from the lamp. Behind its structure, it resembles sunlight. Due to this, the air in the room begins to heat up.

The heater is fixed on the ceiling and allows you to warm the entire room. That is why this option is considered one of the best for the garage. This creates a pleasant microclimate.

Advantages of infrared heaters:

1. Efficiency. Some options can even save electricity.
2. Durability. The manufacturer provides a 25 year warranty.
3. Mobility. The heater can be used for various purposes.

The operation of the devices is absolutely safe. In this case, there is no unnecessary noise, and radiation is not harmful to humans. The only thing that does not please is the price of the device. Yes, and choosing the right model will create a lot of worries.

For a garage, you should choose a ceiling-type household heater. They are mounted on the ceiling, and the range of action will help to heat the entire room. But installation can only be carried out where the ceiling height is 2.5-3 m.

infrared heating

Main advantages:

• capital savings in energy consumption;
• saving space (mounted on the ceiling or wall of the room).

Such a device has the “smart” ability to heat only objects or surfaces in the garage, without affecting the airspace (see also - benefits and infrared heater damage). To take advantage of this miracle of technology, you should order professional installation from specialists.

The essence of the work of an infrared heater is as follows: the elements of the device contain special light bulbs that burn in the spectral range, invisible to the human eye. They radiate a powerful heat flux. Such heating can be compared to solar heat, which is absorbed by all surrounding materials. So, for example, the floor, furniture and people who are nearby are warmed. The built-in fan enhances heat transfer.

Such devices are attached on the ceiling or walls, and competent installation will really save on electricity. If you still don't know how choose an infrared heater for a garage based on its parameters, consult the manager in the store. He will select the optimal power and size of the device.

Best infrared heaters are shown on market models Neoclima NC-CH-3000 (floor), Timberk TCH A1N 1500 (ceiling) and Stiebel Eltron IW 180 (wall).

Practical heating cables

Many will say that the organization of the "warm floor" system in the garage is an excess and a luxury. But from the point of view of practice, this is a very good option for heating the room, as well as eliminating excess moisture in it.

Scheme of operation of heating cables.

Here we are more talking about the local placement of heating cables in the place where the car is located, in order to eliminate problems with starting it in cold weather.

Given that the "warm floor" system does not emit much heat, the car is covered with a cover so that it reaches the floor. In this case, the heating zone will be limited to the space under the vehicle and the car itself.

There will be no movement of air masses between the heating zone and the rest of the room, and heat losses through the cover at a temperature difference not exceeding 20 ° C will be minimal. This method of heating makes it possible to economically and fully warm up the vehicle.

The main advantage of such systems is that power consumption of the heating element low and any electrical wiring can withstand it. As for the shortcomings: the usefulness of the operation of such a system lies in a properly installed cable, which only professionals can do.

Even minor deviations from the rules can reduce the efficiency of the heating element.