Which water heater to choose for an apartment and a house

The subtleties of choosing a flowing electric water heater

The flow boiler heats the water immediately after it is turned on. It features excellent performance. Such a device heats water in unlimited volumes to a temperature of about + 60 °. The essence of his work is simple. Cold water is supplied to the boiler, where there is a heating element (usually made of copper), which has a high power - from 3–4 to 20–24 kW. At the exit we get hot water.

Everything is simple. But if you decide to install a flow boiler at home, you should immediately replace the electric meter and wiring.The load on them will be high, old equipment may simply not withstand such power. It is also worth taking care of connecting a good circuit breaker.

Instantaneous electric water heater

The flow heater is mounted, as a rule, for one draw-off point. It is installed on the kitchen faucet, where you wash the dishes, or in the bathroom for a shower. If there is a desire to connect many points of water analysis to one device, it is necessary to purchase a unit with a maximum power (16–24 kW). A less powerful device will not be able to heat water for several taps to a comfortable temperature.

For a house or apartment with single-phase sockets (for 220 V), it is better to purchase a modest heating unit. Take a boiler with a power of no more than 8 kW. If the dwelling is equipped with sockets for 380-volt voltage (houses with electric stoves), heaters of higher power can be installed.

As you can see, choosing the right instantaneous water heater is not difficult at all.

It is only important to take into account the technical potential of the electrical wiring in the apartment and determine the volume of hot water that you plan to consume.

And one moment. Electric boilers differ in installation technology. They are:

• Non-pressure. Such units are mounted next to the tapping point.
• Pressure. These devices are installed directly in the water pipe.

In apartments, it is better to mount pressure units, and non-pressure units are more suitable for a private house.

No. 2. Heating element type

Heating elements are responsible for heating in boilers, spiral heating elements are less often used (they are more powerful, but if something happens, they are more difficult to repair).

Heating elements can be of two types:

• "wet";
• "dry".

It is easy to understand who is who by the name."Wet" heating element - a copper heating element that is immersed in water and works like a boiler. Such heating elements are typical for many storage and almost all flow boilers. These are cheap devices, but due to direct contact of the heating element with water, scale quickly forms on it, which has high thermal insulation properties, due to which the heating element's ability to heat water decreases. You will have to constantly increase the temperature, and this will affect the life of the boiler. It is noteworthy that the higher the heating temperature, the faster the formation of scale. In addition, the "wet" heating element is subject to electrochemical corrosion. If a water filter is installed in the apartment, then in principle you can take a boiler of this type, it costs less. When working with hard water, get ready to clean the heating element every 3-4 months.

"Dry" (steatine) heating element is protected by a special flask and does not come into contact with water, so scale cannot form here. The heat transfer of such a heating element is much higher, the service life is also, but a boiler with a similar heating element will cost 1.5-2 times more.

Boilers Atlantic

A good example of a water heater with a “dry” heating element is the French Atlantic. Atlantic factories are located all over the world. Except China - that's why Atlantic is often called the most "NON-Chinese" water heaters. Atlantic boilers are equipped with a self-developed steatite heating element with a service life of up to 20 years. This is ten times longer than conventional inexpensive "wet" heating elements.

Due to the coating of the tank with branded enamel with titanium dioxide and a magnesium anode, scale does not practically settle in Atlantic boilers and rust does not appear.Therefore, Atlantic are also the quietest, economical and reliable water heaters of all that are sold in Russia.

Atlantic work with all types of water and are provided with a maximum guarantee for tanks - 7-8 years. And the Atlantic does not need to be serviced annually, like most conventional Chinese manufacturers. And once every 2-3 years.

Storage water heaters can be equipped with one or two heating elements. The second heating element is received by all boilers of large volume, as well as models with a fast heating function.

Storage tank - what is the advantage

Strictly speaking, there are only two options for water heaters, which differ in the way they heat water.

1. Flowing, and its name speaks for itself. It warms only a small volume of water at the moment when the flow passes through the heating element. The advantage of this design lies in the heating rate. And it is, in fact, the only one, because if the supply of cold water is cut off, you will not have hot water either.

2. Cumulative. Unlike a flow heater, storage-type equipment has a tank that is filled with water, and in household models its volume can reach 100 liters (minimum 12 liters). It takes time to heat this amount of water, but you will have it in stock even when the water or electricity is turned off.

In addition, the boiler (the second name for storage-type heaters) does not consume electricity while you are using the already heated volume of water, which gives tangible savings. This is his second, and very significant advantage.

Appearance

Accommodation option in the kitchen

Many apartment owners are familiar with the problem of insufficient heating of water with its centralized supply.Rather than constantly conflict with the company providing such a service and write complaints, it is easier to refuse it altogether and install a small electric water heater.

Thanks to various shapes and compact dimensions, you can always choose the right option and place it in almost any size room. The main thing is to provide for the outlet of the pipeline supplying cold water in the right place.

Accommodation option in the bathroom

wood burning model

“Titans” or “Water heaters” is a special name for wood-burning water heaters that work by burning wood in a special firebox. Today, these are the most ancient devices, but they are valued no less than before. Each such unit consists of a firebox for burning firewood and a container into which water is collected. This container also has a fire tube installed.

The water in the system acquires the required temperature due to the combustion of firewood in the furnace, as well as due to hot smoke that exits through a pipe inside a container with liquid. A fairly serious unit that can heat a large amount of water to a high temperature has its drawbacks - it is almost impossible to regulate the outlet water temperature. But there are always ideas that allow us to increase the comfort of our own lives, for example, installing a faucet at the outlet of the “Titan” and connecting cold water to it, thanks to which the temperature from the wood-burning water heater can now be regulated.

Flow boilers: how to install them?

Autonomous hot water supply in a country house is an excellent solution. In order to have enough hot water in your country house at minimal cost, it is best to use an instantaneous electric water heater.

When installing it, choose a place near the water point. In this case, heat losses will be minimized, and in addition, the cost of laying pipelines will also be minimal.

By installing this device next to the water intake, for example, in the kitchen or in the bathroom, the owner of the cottage can receive as much hot water as he needs. Heating of cold water to the desired temperature occurs quite quickly, this process occurs when a jet of water passes through the heat exchanger. In order for the hot water pressure to be sufficient and the temperature of the produced hot water to be optimal, the following criteria must be followed when choosing equipment:

• electrical power that you have on your site;
• the presence at the dacha of a central water main or an autonomous water supply system;
• the maximum water flow through the water heater required for you.

When choosing a device such as a water heater for your dacha, you must remember that its performance depends on parameters such as the temperature of the incoming water and the power of the installation. If the device is connected to a centralized water supply, fluctuations in the temperature of the incoming water are possible.

Many heaters are equipped with two types of heating elements: heating elements or spiral ones. The first have a spiral, which is placed in a sealed copper tube. The spiral does not come into contact with flowing water. The main advantage of such elements is their reliability. They ensure the reliability of the device in the event of air jams in the water supply.

The most common is a circuit that includes a hydromechanical differential pressure switch, supplemented by a power contact group. When the flow of water passes through the water heater, there is a pressure difference at the inlet and outlet of the installation. Through the relay, the difference is registered, as a result of which the contact group is closed. When the water intake is stopped, the relay switches off the water heater.

Such a system has several advantages:

• simplicity;
• reliability;
• high maintainability.

One of the disadvantages is the inability to perform smooth power adjustment due to slight temperature fluctuations. If you use a two-stage pressure switch, then this minus is reduced to zero. And, using a flow regulator, you can smooth out fluctuations in water flow.

In recent years, instantaneous water heaters have become increasingly common. Especially popular among summer residents are models equipped with an electronic control system. Such a system has the following principle of operation: the built-in microprocessor, using sensors and data from the flow meter, determines the outlet water temperature, and in addition, the flow rate. Depending on the temperature set by the consumer and the input data, it gains the required heating power. Many modern models have the ability digital indication of the set temperature water.

During the operation of any boiler, the occurrence of fluctuations in the pressure of the incoming water is an acceptable phenomenon. This can lead to a change in the flow rate, as a result of which the temperature of the hot water can also change over time.

Similar situations can also arise when several water points, for example, a shower, a sink, a bathroom, are used simultaneously. To ensure comfortable water treatment, manufacturers from Europe that produce water heaters install flow control systems in their models. They are able to maintain a constant temperature at the outlet of the device.

Tips & Tricks

There is an opinion that electric water heaters often fail, they are not of the highest quality. Reviews say that these devices are rather unreliable equipment. This opinion is without any foundation. Water heaters fail no more often than any other equipment, but errors in the operation of the device increase the likelihood of breakdowns at times. There are several rules for operating the device that will allow it to work faithfully for many years:

• The appliance should never be set to the highest heating temperature. If you set the maximum mode, then the design can burn out quite quickly, the service life in this case often does not exceed 6 months. In addition, if the water temperature is close to the boiling point, the user may be burned if pipes or hoses leak. Do not expose yourself and your loved ones to such a risk.
• If the model has two heating elements separated from each other, then it is optimal if it works on only one heating element. In this case, if one of the heating elements burns out, the second continues to function and heat the water.

Even before buying the device, pay attention to the operating instructions, and, in particular, to the maintenance of the device and the need to replace the magnesium anode.Once every six months, it is necessary to completely drain the water from the tank and remove the heating element with an anode for external inspection

If it is covered with limescale, and the anode itself is almost dissolved, it should be cleaned and the old anode replaced with a new one.
Do not forget to regularly replace the check valve in the water heater in case of a breakdown. A signal of such a malfunction can be a characteristic "groaning gurgle" at the moment the cold water is turned off. This indicates that the valve does not cope with the tasks assigned to it, namely, it does not hold water, so the liquid flows back and the heating element starts to idle, which inevitably leads to burnout.

For more information on what to consider when choosing an electric water heater, see below.

Heater configuration and capacity

The shapes of storage-type heaters can be very diverse: a flat square, an oval, a vertical or horizontal rectangle. The configuration is selected not so much for aesthetic reasons, but depending on the available installation space.

square tank

Round storage

Horizontal flat heater

Vertical cylindrical boiler

1. Horizontal tanks are usually mounted above a doorway, or when the bottom of the wall is occupied by other equipment.
2. The vertical one will fit perfectly into the wall, or, as shown in one of the photos, it can be squeezed between the sink and the washer.
3. The place must be determined in advance so that there is something to guide when choosing the configuration and dimensions of the device.

For a horizontal tank, the ideal place is above the door

Where to put the vertical heater

Niche in the bathroom for a boiler

By volume, the tanks are selected based on the number of people living in the apartment and the type of plumbing equipment used. Most of all, water is required for taking a bath - about 50-60 liters. If you just take a shower, then this volume is enough for two people. The third will have to wait until a new portion of water is heated. 10-15 liters are enough for washing dishes, and in order not to waste them from a large boiler, you can install a separate, smaller one under the sink in the kitchen.

The main types of flow-type boilers

If the task is to provide heating of a large amount of water, then in this case it is necessary to use an installation with large power parameters. For example, in order to be able to take a bath in your country house, you need to install an electric water heater in it, the power of which should be 8 kW.

However, do not forget about security. When choosing such a device in a dwelling, it is necessary to focus on the power of the electrical wiring laid in it. If you decide to purchase an electric water heater of 5 kW for your dacha, then the wiring should be designed for 30 amperes. In addition to electrical wiring, for such equipment it is necessary to provide its own cable to a socket with mandatory grounding. You can accurately determine what power electric water heater will satisfy your needs for hot water in the country, using the average water consumption pattern in various rooms of your house:

• bath - 8-10 l / m;
• kitchen - 4-5 l / m;
• shower - 5-8 l / m.

To correctly calculate the power of an electric water heater, you need to divide this indicator by 2. This will allow you to get the approximate volume of water that the device produces in one minute.Based on these figures, you can choose the required power. If the appliance is needed for household needs, for example, for washing dishes in the kitchen, then the best solution is an electric water heater with a power of 23 kW. For a shower, the best choice would be an installation with a power of 3-4 kW.

The best storage water heaters for 80 liters or more

Boilers with a tank volume of 80 l, 100 l and 150 l are most often used in summer cottages and in private homes. This volume will be enough for several people to buy without reheating, but at the same time, the time to heat the water increases several times.

4Stiebel Eltron 100 LCD

Stiebel Eltron 100 LCD is an incredibly functional, but at the same time very expensive electric storage water heater. This model combines high German standards, advanced technology and high security class.

The first thing that attracts the attention of the buyer is a multifunctional liquid crystal display. On it you can see the amount of energy consumed, temperature, the current amount of water in the tank, operating modes, and so on.

In addition, the self-diagnosis mode will report any malfunctions in the device.

The enamel inner coating of the tank will prevent rust. The Stiebel Eltron 100 LCD also provides for the presence of a titanium anode, which, unlike magnesium, does not require replacement and maintenance during operation. It is also worth noting the function of a two-tariff power supply mode, a boiler and anti-freeze mode.

pros

• Very powerful device, heats water quickly
• Holds heat well
• Convenient management
• Additional modes of use

Minuses

3Gorenje GBFU 100 E B6

Gorenje GBFU 100 E B6 ranks third among the best storage electric water heaters for 80 liters or more. This model is created using modern technologies, which ensures reliable operation and easy maintenance.

The main advantage in comparison with analogues is the presence of a “dry” heating element. This type of heating element is protected from scale and damage by a special flask. Plus, the inner surface of such devices is completely covered with enamel, which means that the load on the magnesium anode is much less.

How to decipher the name Gorenje GBFU 100 E B6?

GB stands for "dry" heating element.

F - compact body.

U - can be installed vertically and horizontally (nozzles are on the left).

100 is the volume of the water tank in liters.

B - the outer case is metal with coloring.

6 - inlet pressure.

Otherwise, the equipment is practically no different from competitors. In this model "Gorenie" there are 2 heating elements with a power of 1 kW each, a mode of preventing freezing, economical heating, a check valve, a thermometer and an indication of the boiler operation.

pros

• Keeps warm for a long time
• Good reliability for the price
• Universal mounting
• Dry heating element and power of 2 kW

Minuses

2Polaris Gamma IMF 80V

The second place goes to the incredibly simple but effective device Polaris Gamma IMF 80V. Due to a reliable heat-insulated tank and several points of water intake, the boiler is ideal for use in houses, baths, cottages, apartments and so on.

Thanks to the flat body, the boiler can easily fit even in small rooms with a shortage of space. All controls are located on the front panel.The digital display shows the current temperature value, next to it there is a temperature level regulator and a mode switch. In this model the mode of economy and the accelerated heating is provided.

The maximum power of the heater in Polaris Gamma IMF 80V is 2 kW. A 100 liter tank heats up in just 118 minutes. The built-in adjustable thermostat maintains the temperature at the set level. The device is protected from switching on without water, overheating, leakage and pressure drops.

pros

• For 80 liters very compact model
• The price is lower than that of analogues with the same functionality
• There is protection against switching on without water and against overheating
• Convenient and simple control

Minuses

1Gorenje OTG 80 SL B6

Most water heaters have very similar specifications, so picking the best one can be tricky. However, Gorenje OTG 80 SL B6 can be considered one of the best models for 80 liters and more.

The compact size of the device allows you to install it even in small spaces (for example, in a toilet). The enameled tank and magnesium anode will protect the body from corrosion. It also includes frost protection, splash protection, safety valve and thermostat. Good thermal insulation allows you to keep the water warm for a long time, even after a power outage.

Numerous positive customer reviews speak for themselves. There is nothing superfluous in this device. Install a Gorenje boiler at home, set the desired temperature, and forget about problems with hot water forever.

pros

• Simple and reliable assistant
• European assembly
• Thermal insulation at a high level
• Heats up a full tank fairly quickly

Minuses

Water heaters for the kitchen

Kitchen water heater Atmor Basic 3.5 faucet (under the sink)

Before us is a simple, but quite high-quality model. The level of assembly and design provide all the prerequisites for long and reliable operation. The water heater differs in small weight, compact dimensions that does possible installation even in the constrained conditions. The connection is simple, with horizontal mounting and bottom connection, all manipulations do not require particularly cunning skills.

Among the pluses I will include mechanical control, it definitely will not collapse at the first network jump. In terms of technical parameters, everything is not bad: pressure - from 0.30 to 7 atm., Power 3.5 kW, productivity - 2 liters per minute. A tubular copper heater operates inside, capable of raising the outlet water temperature to +60 degrees (actually, it is). It is quite possible to wash the dishes during the hot water shutdown season. There are all safety options, in particular, protection against overheating, from turning on without water. Price - from 1.8 tr.

Pros:

• reliable mechanical control, can be used even in the village, even in the country;
• compact, lightweight;
• the kit includes a faucet, power cord;
• the optimal solution for washing dishes, the device gives out the promised heating.

Minuses:

• heats up the wire
• on the maximum mode can knock out traffic jams.

Kitchen water heater Atmor Basic 5 faucet

Another kitchen heater in our rating operates on a flow type from the electrical network. It is more productive than the previous comrade and produces 3 liters per minute. Power - 5 kW. At the maximum, the device will heat the water up to +65 degrees. The inlet pressure is rated at 0.30 - 7 atm., which is typical for this class.

The equipment is controlled mechanically, using two switches.Anyone can cope with this system: minimum mode - one switch is on, medium - the second, maximum - both. There is protection against overheating and switching on without water. A productive copper heater is responsible for heating. Price - from 1.8 tr.

Pros:

• lightweight, compact model without much hassle to install;
• in practice, it quickly gives out hot water with the promised heating;
• affordable price;
• security options;
• mechanical control.

Minuses:

wire heating.

Pros and cons

Instantaneous storage water heaters have the following advantages:

Compact dimensions allow you to place a water heater even in a small apartment, but this characteristic applies only to models of about 10-15 liters. The device does not clutter up the space, easily fitting into any interior.

High speed of work is sure to come in handy when you need to heat water as soon as possible. As soon as the liquid begins to cool, it will be possible to turn on the flow mode and maintain the optimum temperature.

The installation process of the device is simple and easy. Many modern models can be connected to the system through a shower hose. If you follow the instructions exactly, you can do the work yourself.

When combining two types of heaters, engineers combined their positive qualities and eliminated their shortcomings.

This is a practical and convenient option for giving. In this case, experts recommend making a choice in favor of non-pressure devices.

Reasonable cost (compared to other models on the market).

Water heaters do not require frequent maintenance.

If we talk about the shortcomings, then it is worth noting the following:

Instantaneous storage water heaters have a complex design.The circuit includes several heating elements, which complicates the repair process.

You can find products only in specialized stores, in large cities, as they are just beginning to gain popularity.

During operation, temperature fluctuations can be observed while the equipment is operating in flow mode. It all depends on the temperature of the water entering the tank.

Bulk

By design, they are similar to storage units. The main difference is the lack of connection to the water supply, i.e., water will have to be poured into the tank manually.

Of course, such equipment is hardly suitable for daily use, but it will not be superfluous to install it in the country in order to enjoy comfortable water procedures.

The power of such devices is low: about 1 - 2 kW, so there are usually no problems with operation.

There are two types of such devices:

1. Gravity - as the name implies, water is supplied under the influence of natural pressure. Of course, the pressure in this case is low. In order to somehow compensate for this drawback, it is recommended to mount such installations under the ceiling.
2. With a built-in pump - a small blower in terms of power creates additional pressure, due to which the pressure increases. This type is found among models with a large tank volume.

Some pouring devices are equipped with the functions of automatic maintenance of temperature and shutdown after heating.

storage heater

The choice of a storage water heater is necessary for those who wish to create a water supply system with several water supply units.Installation of a storage heater involves the installation of a water tank, a heater, a quick access system to the internal structure. It is problematic to do this with your own hands, but the abundance of specialized companies eliminates problems.

Scheme of the storage water heater.

Which storage heater should I choose? For summer cottages, it is important that the volume of the storage heater tank is sufficient for taking a bath and other hygiene procedures. But a storage heater device with a tank of more than 90 liters will be uneconomical and useless: the need for such a large amount of water is not justified, and the energy costs for heating such a container are 31% higher than usual. If water in the country is taken from sources with high salinity, it is best to use heaters with a zigzag or spiral coil

The abundance of bends will prevent the deposition of salts on the heating element

If the water in the country is taken from sources with high salinity, it is best to use heaters with a zigzag or spiral coil. The abundance of bends will prevent the deposition of salts on the heating element.

The second indicator is the strength threshold of wiring in the country. It is no secret that in many dachas the electrical supply is carried out in a "handicraft" way, which means that the chances of an accident and a fire are high. In this case, a power of more than 1.5 W is unacceptable.

However, if the power supply system does not set any restrictions on the power of the device, then it would be advisable to supply a device with a power of 2 kW or more. In this case, it will be possible to provide several households on the site with water.

One very important point: if the heater is powerful, this does not mean that other expenses for the dacha will have to be reduced.The "exhaust" of electrical energy is due to poor electrical and thermal insulation, due to ill-conceived operation. A lot of energy is wasted if an illiterate installation of the device was carried out on the north wall of the room.

Natural cooling takes kilojoules of heat, which forces the unit to work several times more powerful.

Scheme of connecting the storage water heater.

Drives are also popular due to the economical mode of operation. When the mode is on, the water heater sets the maximum temperature ceiling at around 50 C. Sometimes the bar reaches 60 C. The limiter is a special thermal element connected to the relay. As soon as the temperature reaches a critical point, the relay opens and the water heating stops. This level of heating is recognized as the best for both the operation of the entire system and for the comfortable use of water. If water is heated to high temperatures, then the following consequences are possible:

• overheating of the working element and failure of the latter;
• rupture of pipes;
• rapid wear of the heater boiler capacity;
• enhanced sedimentation of salts on the inner surface of the heater.

During installation, please note that the heating / cooling range for most models is in the range from 9-85 C. If the heater is supposed to work with high temperatures, then you should choose a model that has a ceramic coating. The latter prevents the sedimentation of salts and harmful impurities on the walls of the container. In addition, ceramics are well tolerated by long-term exposure to hot water and steam. Do-it-yourself installation of such structures is prohibited due to the complexity of the work!

Summing up

For a private house, a storage boiler will be the best purchase.You will have to choose between gas and electric models, based on the presence of a gas pipeline and the possibility of paying impressive amounts for electricity.

How to choose a boiler

The volume of the boiler is better to choose at least 150-180 liters. Such a supply of hot water is enough to wash dishes, take a shower, do wet cleaning, etc. during the day.

How to choose a boiler

It is advisable to pay attention to quality products of popular manufacturers. A long warranty period will indicate the quality of the product

It is also worth clarifying the location of the nearest service centers, issues of warranty and post-warranty service, the cost of spare parts and accessories for installation. Not always the most expensive model of the heater is suitable, but you should not save too much, because the water heater, as a rule, is purchased for more than one year.

Video - How to choose a water heater for a private house

Table. How to choose a water heater for a private house

Model	Description	price, rub.
Gas instantaneous water heater Vaillant atmoMAG exclusiv 14-0 RXI	Power 24.4 kW. Ignition type electronic. Water consumption 4.6-14 l/min. Height 680 mm. Width 350 mm. Depth 269 mm. Weight 14 kg. Mounting type vertical. Chimney diameter 130 mm.	20500
Geyser Vektor JSD 11-N	Power 11 kW. Ignition type - battery. Height 370 mm. Width 270 mm. Depth 140 mm. Weight 4.5 kg. Mounting type vertical. A chimney is not required. Works on liquefied gas. Productivity up to 5 liters per minute.	5600
CatalogWater heatersGas instantaneous water heaters (geysers)BoschGas instantaneous water heater Bosch WR 10-2P (GWH 10 — 2 CO P)	Power 17.4 kW. Ignition type - piezo. Height 580 mm.Width 310 mm. Depth 220 mm. Weight 11 kg. Mounting type vertical. Chimney diameter 112.5 mm. Water consumption 4.0-11.0 l/min. Stainless steel burner. Copper heat exchanger with a service life of 15 years.	8100
Stiebel Eltron DHE 18/21/24 Sli	Power up to 24 kW, voltage 380 V, size 470 x 200 x 140 mm, suitable for providing several water points at once, electronic remote control, water and electricity saving function, security system, heats water up to 65 degrees. The heating element is an uninsulated spiral in a copper flask.	63500
THERMEX 500 Stream	Weight 1.52 kg. Power 5.2 kW.	2290
Electric instantaneous water heater Timberk WHEL-3 OSC shower+faucet	Power 2.2 - 5.6 kW. Water consumption 4 liters per minute. Dimensions 159 x 272 x 112 mm. Weight 1.19 kg. Waterproof case. Suitable for one tap. Copper heating element. Outlet water temperature 18 degrees.	2314
Storage water heater Ariston Platinum SI 300 T	Volume 300 l, power 6 kW, dimensions 1503 x 635 x 758 mm, weight 63 kg, installation type floor, voltage 380 V, mechanical control, internal tank material stainless steel.	50550
Storage water heater Ariston Platinum SI 200 M	Volume 200 l, weight 34.1 kg, power 3.2 kW, vertical mounting, voltage 220 V, inner tank material stainless steel, mechanical control. Dimensions 1058 x 35 x 758 mm.	36700
Accumulative water heater Vaillant VEH 200/6	Volume 200 l, power 2-7.5 kW, dimensions 1265 x 605 x 605, floor standing, voltage 220-380 V, Enameled container with anti-corrosion anode. Robust stainless steel heating element. Possibility of using the night tariff of electricity.	63928

General catalog BAXI 2015-2016. Download file

THERMEX ER 300V, 300 liters

Instantaneous storage water heaters

Electric instantaneous water heater

Electric storage water heaters Ariston

Comparative table of water heaters Ariston

Instantaneous electric water heater

Instantaneous electric water heaters

Flowing gas water heaters

Accumulative water heater Ariston ABS VLS PREMIUM PW 80

Accumulative gas water heater

Hajdu gas storage water heaters

hajdu GB120.2 gas storage water heater without chimney

Gas heaters Bradford White

Geyser

Water heater Termeks (Thermex) ROUND PLUS IR 150 V (vertical) 150 l. 2,0 kW stainless steel.

Gas storage water heater device

How to choose a boiler

How to choose a boiler

How to choose a water heater for a private house