- What type of kitchen faucet is better to choose
- Voting for the best kitchen faucet
- Ledeme L4055В-3
- Which brand of kitchen faucet is better to choose
- Video - A variety of types of kitchen faucets
- Maintenance and operation
- Grohe is the world market leader in faucets
- Lists of the best
- budget
- Telescopic
- Contactless
- 2 VIDIMA
- GF Italy (CRM)/S-14-007F
- TOP 15 best faucets
- Which companies can be trusted
- Expensive and high quality
- Average price range
- Inexpensive Options
- Characteristic table
- Best Inexpensive Faucets
- IDDIS
- Vidima
- FRAP
- Kaiser
- Ledeme
- Top Producers
- Best Bath Shower Faucets
- Vidima Orion B4225AA/BA005AA
- Gappo Noar G1148-8
- Lemark Plus Strike LM1102C
- Installation location
- 4 Jacob Delafon
What type of kitchen faucet is better to choose
Quality characteristics and functionality are the most important parameters of any plumbing, including kitchen options. Currently, single-lever, two-valve and non-contact type devices are being produced, but in recent years it is the first option that has become especially in demand, corresponding to all modern trends and featuring economical water consumption. The classic model with two taps will decorate the kitchen in a retro style, and touchless electronic faucets have a very high, not always justified cost.
Types of mixer designs
As practice shows, the water jet from the tap should fall directly into the drain, which will minimize discomfort during frequent use. Faucets are produced with a low, medium and high type of spout, when choosing which you must be guided, first of all, by the depth of the installed sink. An important aspect is the angle of rotation of the kitchen faucet:
- budget devices - 120-140o;
- premium class - 180o or more.
It is especially important to take into account the rotation if the sink is mounted against a wall or on a so-called "kitchen island". In most cases, installation is carried out on the countertop or directly on the sink using shaped half washers or a fixing nut.
Vertical connection, as a rule, is made by means of standard flexible hoses, and for direct connection to pipes, eccentrics (necessary positioning) with cone pads are used, which are already included in the kit.
Pros and cons of different types of mixers
An important issue of choice is the type of material that affects the durability of the product and individual parts. To cast the case, reliable steel or high-quality brass is used, which are not inferior in characteristics to bronze and copper, but at the same time are the most affordable. Budget options - silumin or zinc-aluminum-copper alloys. It should be remembered that heat-resistant durable plastics and cermets look very impressive, but do not belong to the category of impact-resistant materials.
Chrome plating is often used as a coating, but the presence of plaque, stains and streaks on such mixers is very noticeable. The obvious disadvantages of chrome plating also include the limited color range.The enameled body has a fairly wide range of shades, but requires proper care during operation. Important selection parameters for a faucet in the kitchen are the presence of additional functionality in the form of a filtering system, an aerator, a pull-out type spout, bayonet fixation, as well as switches for other types of household kitchen appliances that depend on the water supply system.
Voting for the best kitchen faucet
Which kitchen faucet would you choose or recommend?
Ledeme L4055В-3
Save the voting results so you don't forget!
You must vote to see the results
Which brand of kitchen faucet is better to choose
The faucet located in the kitchen is used about a hundred times a day, so special attention should be paid to the reliability and durability of the design. You should not buy cheap products from unknown manufacturers, one-time savings will soon result in the cost of repairing or replacing a failed device
When choosing, you should prefer well-known companies that have proven themselves to be of high quality. Plumbing fixtures of the following brands are distinguished by a long service life without loss of performance:
- Manufacturers in Germany: Grohe, SIEMENS ag, Viega, Kaldewei, Dornbracht.
- Made in Italy: Jacuzzi, Roca, Bonomini, Duka, Rifra.
- Made in France by Jacob Delafon.
- Sweden - Alifa Laval.
In addition, when choosing, you should pay attention to the weight of the product. Faucets made from quality materials cannot be light
Designer models deserve special mention, often having a completely unusual appearance.
Video - A variety of types of kitchen faucets
Inexpensive, but high-quality plumbing fixtures produced by the Russian company Aquaton, Oras (Finland) and Damixa (Denmark) deserved good consumer reviews. They provide housewives with comfortable and convenient work on cooking in the kitchen and washing dishes after family feasts. These mixers function flawlessly for a long time without loss of performance.
7 mistakes you make in your own kitchen
Low price does not always mean low quality products. Almost all leading manufacturers of plumbing fixtures produce low-cost, high-quality products with limited functionality. In addition, there are companies specializing in the production of economy class products, such as Varion (Russia) or RAF Rimini (Czech Republic).
Maintenance and operation
The service life of mixers is significantly increased with timely maintenance and compliance with the following rules:
- if the design contains ceramic gaskets, excessive efforts should not be applied when operating the device;
- the grid located on the nozzle should be regularly cleaned of fine contaminants;
- do not use cleaning products containing perchloric or acetic acid to remove drips and deposits, as they can damage the surface of the product;
- scratches on the case also leave abrasive substances and hard brushes;
- pollution should be removed only by the compositions recommended by the operating instructions;
- Cleaning of chrome and gold-plated surfaces is carried out only with soapy water, then they are wiped dry and polished.
In conclusion, we note that a kitchen faucet that is properly selected for specific operating conditions will last for many years without loss of performance. Products of reputable manufacturers of this type of product should be preferred. It is better to buy them in specialized plumbing stores that have quality certificates for the proposed range of goods. One-time savings when purchasing cheap counterfeit devices will soon turn into the cost of repairing and replacing failed parts.
Grohe is the world market leader in faucets
Grohe is a well-known German brand specialized in the production of sanitary equipment and valves. The company was founded in 1936. Currently represented in 15 countries. Products from Grohe are used for installation in residential and commercial premises. The company uses innovative equipment, constantly improves quality and expands the range of products.
Used technical solutions:
GROHE SilkMove is a technology that guarantees a smooth movement of the lever, as well as precise control of temperature and pressure. Main advantages: the use of high-quality cartridges, smooth ceramic plates and special Teflon lubricant. The cartridge plates are polished to perfect smoothness. The case is characterized by a high level of strength and durability, retains an aesthetic appearance, does not require complex maintenance.
GROHE StarLight is the result of many years of improvement in electroplating processes. Multi-stage quality control allowed to ensure maximum reliability of the coating. This applies to both products with a chrome surface, and glossy, colored, matte models.
GROHE EcoJoy is an economical technology that reduces the amount of water used by up to 50%. Profitability is combined with comfortable use of the mixer. Modern aerators allow comfortable use with the greatest possible water savings.
Mixer series:
- Atrio - harmonious design, minimalist style, rounded lines;
- Allure - classic valve and modern lever models, distinguished by precise geometric shapes;
- Allure BRILLIANT - a series of faucets with precise geometric lines and a sparkling, smooth surface;
- Eurosmart - modern minimalist faucets with rounded lines;
- Eurodisc Joy - models with a special joystick for regulating pressure and temperature;
- Eurosmart COSMOPOLITAN - "smart", innovative faucets with rounded lines;
- Tenso - modern faucets in a minimalist style with cylindrical shapes;
- Aria - chrome-plated faucets with arched bodies and conical handles;
- Veris - a collection with a wide range of designs and colors;
- Avina - classic round taps in a modern style;
- Chiara - models with a drop-shaped case, chrome-plated;
- Eurocube - economical cube-shaped mixers;
- Essence - models in a futuristic style, rounded shapes and lines;
- Quadra - faucets that combine rounded lines and a cubic body shape;
- Eurodisc Cosmopolitan - models of a strict form with a glossy surface;
- Europlus - mixers with a chrome-plated body in a minimalist style;
- Eurostyle and Eurostyle Cosmopolitan - modern economical faucets with rounded shapes;
- Lineare - models that are distinguished by a contrasting combination of rounded and square shapes;
- Concetto - faucets made in a classic form;
- Grandera is an unusual collection, the models resemble the shape of the Eiffel Tower, the body expands at the bottom. Style: modern;
- BauLoop - a series of cylindrical mixers with a flat lever;
- Sinfonia - stylish faucets with rounded shapes with gold accents, chrome finish;
- Costa - faucets and retro style;
- BauClassic - models in the Bauhaus style, distinguished by strict straight lines and shapes;
- BauFlow - an elegant, simple silhouette emphasizes the recognizable Grohe design;
- Euroeco - a series of classic mixers with a high level of economy;
- BauCurve and BauEdge are faucets made from quality materials, with a Bauhaus-influenced shape.
Store offers:
Lists of the best
Below is a list of the best faucets in three categories:
- Budget.
- Telescopic.
- Contactless.
Let's start a detailed acquaintance with each section and the models described in them.
budget
Vidima Orion B4225AA/BA005AA budget single-lever faucet is very popular among users. It has a vertical type of installation and provides the ability to connect a shower head, which is included in the kit.
| Stop valve | ceramic cartridge |
| Type of | single lever |
| Type of eyeliner | flexible |
| spout length | 320 mm |
Cost: from 1,000 to 1,500 rubles.
faucet Vidima Orion B4225AA/BA005AA
Telescopic
ORAS OPTIMA 7160 has the minimum number of functions that is enough to perform the main job - the supply of water in a mixed state. On the sides of the device there are two convenient handles: the left one switches the water to the shower and back, and the right one is responsible for adjusting the water temperature.
| Type of | double grip |
| Thermostat | there is |
| Maximum water flow | 17.4 l/min |
| Mounting | vertical |
Cost: from 9,000 to 11,500 rubles.
mixer tap ORAS OPTIMA 7160
Contactless
Gappo G521 is an excellent touchless faucet designed for installation in a sink. Skillfully combines a brass body and a swivel-type spout. Installation is carried out in a horizontal arrangement.
| Type of | sensory |
| Coating | bronze |
| Housing material | brass |
| Embedded | No |
Cost: from 8,000 to 11,500 rubles.
faucet Gappo G521
2 VIDIMA
Based on analytical reports, we can say that in terms of sales in our country, the Bulgarian manufacturer VIDIMA occupies one of the leading places. The company's products are available for wide mass consumption. Faucets differ in convenience, low price, nice design and high quality. A feature of the products are ceramic discs, which are made from aluminum oxide (strength like that of diamond). The material of manufacture of VIDIMA mixers is brass containing a reduced percentage of tin (less than 1.6). The chemical composition is systematically tested in accordance with modern requirements and standards.
The largest number of faucets are equipped with ceramic cartridges 4-4.7 cm in size. The plastic elements that make up the design are processed with copper. This contributes to the plasticity and durability of chromium plating in the future. Any buyer, regardless of income level, will be able to choose the right bath faucet. Compared to other brands, VIDIMA is considered one of the best in terms of price and quality.
GF Italy (CRM)/S-14-007F
GF Italy (CRM)/S-14-007F
GF Italy (CRM)/S-14-007F is a faucet with a classic swivel spout, tabletop installation type.Flexible water supply, good spout height, the body is not susceptible to mechanical damage. Fits perfectly into the interior of the kitchen, has an arched design.
PROS:
- 360 degree rotation angle;
- ceramic shut-off valve;
- excellent design;
- practicality of the design.
MINUSES:
- only for the kitchen;
- one mounting hole.
TOP 15 best faucets
Mixer video review
It will be interesting to you: OVERVIEW: TOP-15 rating of Popular Steamers of 2018: quality, price, power
What are you paying attention to? (+Reviews). TOP-15 Electric Meat Grinders: Rating of the best models
Important points when choosing
TOP-15 Electric meat grinders: Rating of the best models. Important points when choosing
Which companies can be trusted
There will be no surprises in this matter. Market leaders in quality are European brands - German, Swedish, Danish. In the middle price range - Bulgaria, Slovenia and firms that have transferred production facilities to China.
Expensive and high quality
Most heard mixers GROHE (Groye). They have proven themselves excellently. There are only two disadvantages - the high price and a large number of fakes.
Moreover, "Groye" has two firms - two brothers. The firm of one is simply called GROHE. The company produces various plumbing fixtures. The second brother has a specialized company, which was named after him - HANS GROHE. This is how they label their products. This company produces only faucets and faucets, its products are even better, but also more expensive.
One of the novelties of Grohe - on and off with a touch
The next branded company is the Danish Damixa (Damixa). It is worth considering that the guarantee is given only if there are filters on the water supply.The products themselves are of high quality, they give a 10-year guarantee for the coating (previously it was 5 years) and several years for the mechanism itself. If your Damixa kitchen faucet starts to drip, chances are limescale has built up somewhere. If the warranty is no longer valid, the tap is disassembled, the plaque is removed (you can wipe it with vinegar) and everything is put back together. Cartridges may leak in Damix single-lever faucets, but this is a consumable item and must be replaced.
Kitchen faucet Damixa Arc 29000
Faucets Oras and Hansa. These trademarks are owned by one European company - Oras Group. Its production facilities are located in continental Europe. There are very few complaints about the quality of products, if there are any problems, then with cartridges. In Oras mixers they are ceramic, and they are demanding on water quality. So if you want the taps to last for a long time, install an after-treatment system.
Oras Ventura - spout on two levels
The range of the campaign includes touchless and "smart" faucets - the latest achievements in the world of plumbing. There are models to switch water for dishwasher. Some faucets can change the angle of the spout. In general, you can choose an Oras kitchen faucet. Their style is peculiar, which pleases - you usually want to put something interesting and new, and not a dull ordinary tap.
Already only from these companies it is not easy to choose a faucet for the kitchen - there are many interesting offers. The price is about the same, as is the quality. But just do not forget that this equipment is intended for clean water, therefore, filters for after-treatment are simply necessary for normal and long-term operation.
Average price range
Not bad people speak about Vidima taps and faucets.This is a Bulgarian company whose products have been working stably for many years. This manufacturer has expensive and budget lines. Cases - brass, high quality finishes, ceramic cartridges - all this is about mixers of this brand. There are single-lever and two-valve mixers with different lengths and spout heights.
Remember the spelling of the logo so as not to buy a fake
The Russian company IDDIS has been producing sanitary equipment since 2004. News process from development to production takes place in Russia. At least that's what it says on the campaign website. There is a standard design, there is a very unusual one - with flat, arched, straight spouts. A variety of handle designs add charm to the products. The bodies are cast from high-quality brass (composition according to GOST). In general, if you need to choose a kitchen faucet from the category of high quality, but not very expensive, look at the company's products.
Iddis Kitchen D KD1SBL0i05
Good reviews about the products of the Zorg campaign. There are many questions about the country in which the production is located, but no one disputes the quality of plumbing. The cases are brass, the design is varied, there are black, white, gray, brass (yellow) and bronze. The price range is also wide - from $45 to $350.
Zorg Inox - unusual design
Inexpensive Options
If that suits you kitchen faucet needs repair or replacement after 2-2.5 years, pay attention to the products of Lemark (Lemark) and Kaizer (Kaiser). Both manufacturers are Chinese, but the quality is quite good. They won’t work for many years, but a couple of years is quite
If you still know how to change cartridges and gaskets, it can last longer
They will not work for many years, but for a couple of years - quite. If you still know how to change cartridges and gaskets, it may last longer.
Characteristic table
| Model | Characteristics |
|---|---|
| Fabiano FKM 31
|
|
| Electrolux EEB4231POX
|
|
| Rozzy Jenori Atlant Z002-9B
|
|
| AquaSanita 2663-601
|
|
| GF Italy (CRM)/S-14-007F
|
|
| Imprese Kucera 55105
|
|
| Oras Saga 3942Y
|
|
| Potato P4098-6
|
|
| Plados Quarmix UG 95
|
|
| Mixxen (Formix) FMAL0325
|
|
| Franke Pola 115.0298.097
|
|
| Kludi Zenta 389739175
|
|
| Ferro Algeo BAG2
|
|
| Grohe Grohtherm 800 34567000
|
|
| Hansgrohe Logis 71100000
|
|
TOP-15 Rating of the best built-in microwave ovens. Warm up quickly and comfortably
Best Inexpensive Faucets
Buying an inexpensive faucet is not a bad idea at all. Practice shows that poor water quality negates the capabilities of expensive models. Therefore, many users prefer to change the device more often than spend extra money on it. Consider several manufacturers producing budget faucets:
IDDIS
Russian company that produces sanitary ware and furniture. Kitchen faucets of this brand show high quality, durability, ability to work in difficult conditions. It should not be assumed that only cheap mixers are present in the IDDIS assortment. The model line is balanced, there are devices for every taste. All devices are produced from high-quality materials, certified modern equipment is used.
Vidima
The Bulgarian company Vidima specializes in the production of mixers for various purposes. For the kitchen, single-lever and two-valve models are available, of the usual type or with additional features. In particular, there are devices with a built-in thermostat and other functions. There are models with an upper or side lever position, which allows you to choose the most convenient configuration of the device. A large selection of traditional two-valve devices that will appeal to older people.They are equipped with high quality ceramic crane boxes. The faucets are chrome-plated, there are matte or glossy surface finishes.
FRAP
Traditional German quality is a well-established expression that everyone understands without further explanation. Frap products fully confirm the usual ideas about German technology. Kitchen faucets are characterized by elegant shapes, reliability, a variety of types of coatings and surface colors. Unlike other manufacturers, the company's engineers are not limited to standard types (chrome, copper finish), using various methods of painting in combination with glossy metal. There are models of different shapes, characterized by a high spout, a vertically directed downward jet and other useful features. At the same time, the prices for mixers are available to everyone, which increases the demand for the products of the German company Frap.
Kaiser
One of the most promoted German brands that produces a wide range of sanitary ware, faucets and other products of this type. The main feature of Kaiser faucets should be considered high quality combined with affordable cost. As a rule, prices for European goods are significantly higher than similar offers from Russian or Chinese manufacturers. However, recently there has been a noticeable trend towards equalizing the cost of both types of kitchen appliances. This has increased the demand for German faucets, characterized by convenient functionality and an elegant, modern spout shape.
Ledeme
Chinese products are considered to be of poor quality, short-lived. However, the reason for such a common perception lies in the low purchasing power of the population, which existed about 20 years ago. Today the situation has changed, but the opinion remains.At the same time, most imported goods, quite reliable and of high quality, are made in China. Ledeme kitchen faucets are an example of this. They practically do not differ from the most modern European models. On sale there are single-lever and two-valve devices, finished in the traditional way (glossy chrome) or decorated in stone, painted in different colors. There are many models with additional functions, equipped with a watering can or a flexible spout. At the same time, the cost of these devices is noticeably lower than that of European or Russian counterparts.
Top Producers
In order not to become the owner of a cheap craft, which in a day will start to flow "do not stand side", it is more profitable to purchase household goods from the best manufacturers. The popularity of their models is earned in the face of fierce competition for the buyer. It is worth getting to know the most popular manufacturers of kitchen equipment better.
Oras
Company from Finland. Its plumbing is distinguished by its stylish design and European quality. Customers especially appreciate her samples for the ability to connect dishwashers and washing machines to them. This option allows you to save on laying additional pipelines and reduces the possibility of leaks.
Am. Pm
German company. Her products are distinguished by modern design and excellent quality. The cost is decent, but lower than other manufacturers producing similar equipment with the same quality and functionality. The design is modern, but always with its own "zest". The company has the most developed network of service points around the world, and the longest warranty periods.
Teka
The company from Germany is one of the world leaders in the production of kitchen equipment. Branches around the world. Products are in high demand on all continents. Popular models of this brand buyers like the original design, smooth adjustment, efficiency. Note the lack of strength of the coating
Teka products must be handled carefully to avoid scratching the surface.
Grohe
Products of this company have gained popularity in Europe since the middle of the last century. Customers appreciate its products for ease of installation and operation, high quality materials and workmanship. Installing a Grohe faucet with your own hands is not difficult. But then you can forget about problems with plumbing for many years.
Franke
Swiss brand. Having started its activity in the last century, by now it has subsidiaries in more than forty countries of the world. The company is engaged in the development and design of sinks complete with faucets. Brass products are covered with copper and bronze, chrome and stainless steel. For ease of use, rotary valves, retractable hoses and other innovations are used. Among such a number of advantages, there are also disadvantages, the most serious of which is the use of non-standard flexible hoses.
Omoikiri
Japanese company. Often uses interesting technical solutions. One of them is a double spout, with a direct connection to the water supply and a filter installed under the sink. This relieves the buyer of the need to spend money on the purchase and installation of an additional crane. Stylish designs and a variety of finishes give Omoikiri an eye-catching look.
Rossinka
This Russian company produces everything strictly according to GOSTs. Moreover, the manufacturer is trying to take into account the special properties of domestic water, or rather, ways to protect their products from its aggressive effects. In general, these are worthy products that meet international standards.
Haiba
Chinese company. Produces budget faucets. Stable quality, good equipment and stylish design delight customers both at home and abroad. However, you can often read complaints about breakages and even cracks in cases. Spare parts for her devices are extremely rare.
Blanco
German company. On the market since 1925. Particularly noteworthy is the variety of finishing materials used by its specialists: silgranit, stainless steel, matte and mirror ceramics. Blanco design solutions make any kitchen the most comfortable corner in an apartment or house.
Ideal Standard
Belgian brand. The popularity of its models of equipment and furniture for bathroom and kitchen has not decreased over the past hundred years. High quality products and great design. Factories in many developed countries of Europe. Reviews only in superlatives.
This is not a complete list of manufacturers of high-quality kitchen equipment. It is up to you to decide which company the unit is better to buy. The main thing is that it organically fit into the interior, worked for many years without breakdowns and leaks.
Best Bath Shower Faucets
Another popular category is universal faucets that can be equipped with a bath and shower at the same time. Such models always have a switch from shower to bath and vice versa, a hose, a watering can, a lever or two valves, an elongated spout so that you can turn it from the bath to the sink as needed.The experts studied many similar models, reviews of each, the recommendations of the masters, after which they decided on universal mixers of good quality from the best manufacturers.
Vidima Orion B4225AA/BA005AA
The high demand for this model is due to the low price. A replaceable 35 mm ceramic cartridge will extend the period of uninterrupted operation; this nominee has no equal in the line of other products at this price. The length of the spout is 40 cm, it is fixed vertically to the wall, the angle of rotation can be up to 360 degrees. To soften and balance the water supply, there is a Perlator aerator inside, which also facilitates the process of setting the temperature. The kit includes a watering can. Of the additional options, it is worth noting the automatic shutdown of the shower.
Advantages
- Quality of materials, assembly;
- Low price;
- Brass spout;
- Ceramic long life cartridge;
- Easy installation;
- Manufacturer's warranty stated.
Flaws
- Rigid shower hose;
- A spout that rotates too much may leak.
This is one of the cheapest but worthy offers. In the reviews, you can see that a crane can last from 5 years or more, if you handle it carefully.
Gappo Noar G1148-8
A distinctive feature of this crane is the horizontal mounting method. on board the bath. For this, 3 holes are used for connection, namely for installing the mixer foot, shower heads, spouts. This does not make installation difficult, on the contrary, even a beginner in such a business can handle it. Flexible wiring can be easily hidden behind the bathtub. The body is made of solid brass, with a two-tone chrome finish on top - gloss, matte with a white tint.The aerator provides a fixed supply of water, there is a limiter that reduces its consumption.
Advantages
- Complete kit for quick installation;
- Stylish appearance;
- Economy of consumption;
- Ball long life cartridge;
- Unusual installation.
Flaws
- There is no wall-mounted watering can holder included;
- The hose pitch is too large.
For such a low cost, this is a worthy offer. There are some minor flaws, but we are not talking about a premium product. The unit will work for a long time, in addition to the main tasks, it reduces water consumption, delivers it almost silently. watering can holder You can buy in addition, many components can be changed over time.
Lemark Plus Strike LM1102C
This bath mixer with short spout The kit includes a 1.5 m long hose, a watering can, and a special wall mount. Despite the fact that its edge barely reaches the bath, the water supply at an angle is as correct and clear as possible. The case is smooth chrome-plated, for a long time it retains external novelty. With a sufficient level of quality, functionality, the crane is sold at a low price. The 35 mm ceramic cartridge provides long term trouble-free operation. There is an aerator that controls temperature, pressure, flow uniformity. All necessary fittings are included.
Advantages
- European production;
- Low price;
- Complete set for installation, operation;
- Thick layer of chrome plating;
- Official warranty for 4 years.
Flaws
- Insufficient workmanship of the watering can, attachments for it;
- Short eyeliner.
Despite the heavy weight of the metal body with a durable coating, the watering can itself is light and fragile.For some, this can be considered a weak point, for someone it’s even more convenient to take a shower. Its compactness will allow not to clutter up the space in the bathroom.
Installation location
There are the following options for installing a kitchen faucet:
- In the sink hole - the most common when the faucet is mounted in a standard-sized hole using a stud or tightening nut.
- In the hole of the countertop - when choosing this variety, you should definitely clarify whether the model you like is intended for such an installation. Otherwise, there is a high probability that the length of the threaded part is not enough for the countertop.
To the wall - this type is becoming less common, but has not yet completely fallen into disuse, since in many apartments the water mains provided for just such a fastening.
4 Jacob Delafon
The famous Jacob Delafon brand has been around for over 100 years. Over the years, he managed to win the hearts of millions of buyers. The business card of the company is modern technologies and elegant forms. Jacob Delafon faucets make up an inexpensive segment on the market, the hallmark of which is good quality and attractive design. The characteristic properties of all models of brand mixers, which users note in their reviews, are advanced technologies, exclusivity, quality, elegant shapes and richness of style.
Developing models of mixers, the company's specialists took into account all kinds of wishes of customers. This has resulted in an ergonomic construction design that incorporates smooth lines that can harmonize with any style of bathroom. Delafon faucets do not need special care, they are easy to clean and always look neat.Models are made of an alloy of copper and zinc, covered with chrome on top, which protects the structure from corrosion and increases its durability. The entire Delafon line is of high quality and average price.
