How to choose a floor air conditioner: tips for choosing + an overview of the best models

Types of mobile air conditioners

There are two types of underfloor air conditioning systems:

With duct function. Such a device will remove warm air using a flexible duct pipe placed directly behind the room, for example, by making an outlet to a window, balcony or vent.

Mobile air conditioner without air duct. Such a device operates on water. The air is passed through the water impregnation of the filter, as the water evaporates, heat is taken from the air. Water, due to its rapid evaporation, must be added frequently.

This system will only humidify the air, and for good air cooling, it is better to store water in the refrigerator. With high humidity, this type of device is not suitable at all.

Terms of use

If your mobile air conditioner is configured correctly, then there should be no problems with its operation in the future. In no case should you keep the air conditioner in rooms with high humidity (baths, baths), as well as outside residential premises. Not the best option for such devices would be the kitchen, where the fumes from cooking can adversely affect both the appearance of the air conditioner and its very operation.

During the use of such air conditioners, you may encounter the problem of constant influx of cold air from the duct opening. In this case, you should buy a better plug or seal all the cracks. Regularly clean and wash your appliance

The most important points that you should pay attention to are checking the integrity and cleanliness of the filters, checking the refrigerant level, inspecting the reliability of the fasteners (if we are talking about a split system), assessing the temperature at the exit of the duct

During operation of the device, completely isolate the room from the rest of the apartment - close windows and doors. Mobile air conditioners do not apply to devices capable of operating in several rooms. So you just reduce the effectiveness of this device. A very important point, which has already been discussed above - do not forget to regularly check the level of condensate in the tank. If you can't keep track of this, buy models with auto-evaporation.

Floor air conditioner without air duct for home: characteristics of devices

Floor conditioners for apartments are the most demanded type of climatic equipment. The persistent summer heat very quickly tires a person, reducing his performance. At the same time, all diseases associated with the cardiovascular system are exacerbated. Therefore, buying a floor mobile air conditioner without an air duct will be the best option. The device is able to create comfortable microclimatic conditions for a person in the house.

Portable air conditioner for home without air duct - a great solution for rental housing

On the market you can find a huge choice of climate control, but not everyone knows which air conditioner of which company is better to choose for an apartment and which particular model is worth stopping at. But before looking at the prices of mobile air conditioners for the home, you should understand in more detail what air conditioners are and what advantages floor structures have.

The current range allows you to buy a floor air conditioner for a house without an air duct in a wide variety. On sale are climatic devices that are equipped with software. Any buyer can become the owner of an air conditioner without an outdoor unit with a thermostat, timer. Modern models provide customizable and automatic modes that allow you to set the desired temperature level.

Mobile floor air conditioner can be easily moved to another room or taken with you to the country house

Installation process

Although the installation of the device does not require additional knowledge and skills, you should familiarize yourself with the basic nuances of installation:

• After the installation is completed, the device must be left in the room in the off state for 2 hours. Only after the time has elapsed, the air conditioner can be turned on
• When installing the air pipe, it is necessary to ensure that there are no obstacles in the way for the flow of air flows
• The air duct must be mounted in a specially equipped window or doorway.
• You should also strictly follow the instructions that come with each air conditioner.

Which mobile air conditioner is better to buy

When choosing a mobile device, first of all, you need to look at the maximum heating area - it is desirable that there is a margin of at least 10 square meters. m. The higher the ceilings, the more powerful the air conditioner should be, but it will consume more electricity. If the room only needs to be kept cool, additional functions in the form of heating, dehumidification, etc. will only increase the cost of the product.

The choice of a mobile air conditioner from the rating is best done taking into account its tasks:

• Those who only plan to cool the room can choose Ballu BPAC-09 CM or Zanussi ZACM-09 MS/N1.
• In conditions of high humidity, Royal Clima RM-MP30CN-E will be relevant.
• To create a healthy microclimate in your home or office, it will not be a mistake to choose Electrolux EACM-13CL/N3.
• For the purpose of additional heating, for example, in the country, you can buy Royal Clima RM-AM34CN-E Amico, General Climate GCP-12HRD or Electrolux EACM-10HR / N3.
• Those who are going to use the air conditioner as the main source of heat should take a closer look at the Ballu BPAC-20CE.
• If the apartment or house is large and you need to periodically cool different rooms, then the Honeywell CL30XC will help to do this without being tied to drainage pipes.

As the rating showed, even the best mobile air conditioners can have minor flaws, and therefore, before choosing any particular model, it is recommended to carefully study reviews about it and characteristics.

6 Ballu BPAC-07 CE_17Y

Premium mobile air conditioner with 2050W cooling capacity. There are ventilation, temperature maintenance, night and dehumidification modes. The device is understandable in control, which is carried out from the remote control. There is also a dust filter.

Due to its power, the monoblock emits a small noise, which is easily drowned out by a working TV. The mini air conditioner can easily cool even large rooms, but it will take a little longer. The louvers of the air conditioner rotate automatically so that the cooling is even. There is a STOP DUST filter, which is responsible for the purity of the air.

Basic operating modes

Manufacturers offer mobile models of air conditionershaving from 1 to 5 operating modes.

Air dehumidification

The dehumidification mode is carried out by removing moisture through the condenser or air duct at increased fan speed.

Ventilation

Mobile systems use 3 fan speeds. In the presence of a microprocessor, the mode selection occurs automatically.

cleaning

Mobile devices have coarse air filters (inlet screens), which must be periodically rinsed with water. Removable activated carbon filters last 12 months, providing fine purification. Built-in ionizers give air impurities a charge that deposits them on the surface.

Mobile split system

Design features and principle of operation

The indoor unit of the system consists of:

• compressor;
• evaporator;
• control unit.

The outdoor unit contains:

• capacitor;
• fan.

Both parts are connected by a flexible hose through which freon passes. The evaporator with freon, located in the indoor unit, absorbs heat in the room, then the refrigerant is driven by the compressor to the outdoor unit and transfers heat to the condenser. Freon returns to the evaporator and again takes hot air from the room - it works in cycles.

The units are equipped with small wheels that allow you to move the devices around the room and place the outdoor unit in the next room or hang the hose out of the window.

Advantages and disadvantages

Two-block portable devices are significantly inferior to classical climate equipment, but at the same time they are devoid of many of the shortcomings inherent in monoblock air conditioners, and therefore have a higher cost.

pros	Minuses
Easy installation	Noisier than classic wall-mounted split systems
Reduced noise level compared to other portable models	Small indoor unit mobility limited by hose length
Ability to rearrange blocks (simultaneously)	Uneven air distribution
Higher power compared to monobloc unit	High price

Installation of a portable split system

When installing an outdoor unit in an adjacent room, there are no problems - just move the unit out of the door, make sure that other appliances and furniture do not block the air intake panel and do not interfere with air circulation. The maximum distance between the blocks is limited by the length of the hose, the minimum is 6 centimeters.

The next difficulty is cutting a groove in the frame for laying a pipe with freon. It is not difficult to make a hole in the frame and pass a hose through it; the special plugs included in the kit will allow you to get rid of the gaps.

The most time-consuming and impractical installation option is to run the hose through a hole made in the outer wall:

1. You will need to disconnect the blocks, which requires special parts and threatens to leak freon.
2. It is necessary to make a hole in the wall, which is rather difficult.

If the wall is damaged, it makes no sense to purchase a mobile split air conditioner - it is better to buy a classic split system that has great advantages and efficiency.

Mobile air conditioner with heating function

All types of air conditioners described above can work for cooling and heating, but their basic principle of heating is different.

How portable air conditioners work

Portable split systems heat the air according to the principle of a heat pump, i.e.cooling operation is switched, the indoor unit becomes a condenser, and the external evaporator and, accordingly, heat goes into the room, and cold air is thrown out into the street. This type of heating is energy-saving, but not able to fully function at low temperatures.

In floor air conditioners heating elements are used without air duct - heating elements. The air blown out by the device passes through the heating element, taking heat and bringing it into the room. The design is reliable, unpretentious, able to heat rooms regardless of the temperature outside, but consumes a large amount of electricity.

Advantages and disadvantages of mobile air conditioners winter / summer

The heating function is a big plus for climate technology, but the effectiveness of the function depends on the conditions of its use and the type of heating.

In split systems and devices with an air duct, the obvious advantage of the type of heating used is high energy efficiency, and a significant drawback is the inability to work at low outdoor temperatures.

The pros and cons of mobile air conditioners with a heating element are precisely in the heating element itself. The device works at any temperature outside and gives good heating.

But if you use a heating element, the energy consumption rises sharply and reaches 2-3 kW per hour. It turns out due to the transfer of heat from outside to the room, split systems have an energy efficiency of 1 to 3, i.e. when consuming 330 W, the device will produce 1 kW of thermal energy. For heating elements, the efficiency is 99% i.e. When consuming 1 kW of electricity, the air conditioner will produce 1 kW of thermal energy.

8 Ballu BPAC-12 CE_17Y

Convenient mobile air conditioner from the Smart Electronic line.In addition to the standard ventilation function, the device maintains the set temperature in the room and dehumidifies the air. There is a night mode. The cooling power of 3220 W is enough for a large room of thirty square meters. The air conditioner is controlled from the remote control.

For a couple of hours of operation, the temperature in the room drops by 4-5 degrees. Using the timer, you set the time you need, after which the device will turn off automatically. In the reviews, buyers note the stylish appearance of the mini air conditioner and the convenience of manually changing the direction of the air.

The best mobile air conditioners with heating function

The ability to heat the room in winter makes mobile air conditioners more functional. In fact, they combine the capabilities of two devices at once, thereby saving the family budget and space in the room.

Royal Clima RM-P60CN-E - with air purification system

5

★★★★★
editorial score

90%
buyers recommend this product

This powerful air conditioner is designed for spacious rooms up to 60 square meters. m. It is able to cool and heat the room, as well as carry out ventilation without changing the temperature. Thanks to its high capacity of 8 m3/min, the Royal Clima RM quickly handles both heating and cooling.

The model is equipped with a filter that purifies the air from dust and bacteria. The unit itself is sold complete with a control panel and has a timer for automatic shutdown and on.

Advantages:

• High power;
• Functional timer;
• Air purification filter;
• Remote control;
• Electronic control;
• Flow regulation.

Flaws:

No self-diagnosis.

The RM-P60CN-E air conditioner from the Presto collection from the Italian brand Royal Clima is suitable for large rooms, quickly cooling or warming the air even with high ceilings.

Ballu BPHS-15H - functional, convenient and reliable

4.9

★★★★★
editorial score

86%
buyers recommend this product

The equipment is designed for rapid cooling, heating and ventilation in medium-sized rooms. It is convenient to control it both from the remote control and using the touch panel, which also displays the temperature in the room. With a power of 4 kW, Ballu BPHS quickly copes with its tasks.

The model received an air outlet increased to 2 m, and now it is not necessary to install it near the window itself. The flow direction can be adjusted from the remote control, which is extremely convenient. Among other things, the air conditioner has an air-cleaning filter and a low-noise night mode.

Advantages:

• Long air outlet;
• Remote control and holder for it included;
• Touchpad;
• Night mode;
• Air filtration.

Flaws:

You cannot manually adjust the fan speed.

Mobile air conditioner BPHS-15H from TM Ballu will be effective in rooms with an area of ​​up to 40 square meters. m.

Electrolux EACM-10HR/N3 - small and quiet air conditioner

4.8

★★★★★
editorial score

85%
buyers recommend this product

Small size, light weight and low noise level are some of the main advantages of the Electrolux model. The air conditioner is made in a modern style, has a white and black body, an LED display and a chassis for movement. It is able to work in automatic, enhanced and night modes, and is controlled from a backlit remote control.

Another plus of the model is the self-evaporation of condensate. This means that the user does not have to manually constantly pour water from the tank.The auto-restart option protects at the time of an emergency shutdown and allows you to restore work according to the specified settings.

Advantages:

• Evaporation of condensate;
• Compact dimensions;
• Low noise level;
• Automatic restart;
• Remote control with backlight.

Flaws:

The air flow is not adjustable.

Mobile air conditioner EACM-10HR/N3 from Electrolux is suitable for any premises (even bedrooms) up to 30 square meters. m.

Zanussi ZACM-07 DV/H/A16/N1 is a small but efficient air conditioner

4.7

★★★★★
editorial score

83%
buyers recommend this product

Another model of a compact home air conditioner can be easily moved from one room to another and even transported in any car - for example, when you go to the country. With the help of the remote control, here you can adjust the temperature with an accuracy of 1 degree without getting up. A turn-off and turn-on timer makes the device even more practical and convenient to use.

The self-diagnosis of malfunctions option will report possible malfunctions in the operation of the air conditioner. And the fan speed control will allow you to adjust the optimal air conditioner operating mode.

Advantages:

• Compact dimensions;
• Low price;
• Maintenance of the set temperature;
• Self-diagnosis;
• Night mode.

Flaws:

There is no forced ventilation.

For small rooms up to 25 sq. m. The best solution would be the ZACM-07 DV / H / A16 / N1 model from the Italian brand Zanussi.

Device and principle of operation

The mobile air conditioner consists of 4 main components.

• Indoor block. This is the main part of the device, which is responsible for adjusting its power and primary processing of air flows.There must be an air filter, a refrigerant, a grill for supplying cooled or heated air, as well as a condensate collection tray or (in expensive models) its evaporator.
• External block. This component is present only in split systems. Usually it is a square block with a fan, which is connected to the indoor unit using a cable and tubes with freon. It can be fixed on the facade of the building or mounted in the window frame.
• Freon line. It consists of a cable and tubes with freon, which connect the indoor and outdoor units of a mobile split system.
• Corrugation or air duct. In mobile air conditioners, it is used to remove warm air outside the room. This element is not present in all modern models of mobile air conditioners.

A classic mobile air conditioner works like this. Freon, which usually acts as a cooling element, circulates continuously through a closed circuit in the device. Compressed to a liquid state, it first enters the evaporator, then gradually evaporates and simultaneously cools it. After that, the refrigerant moves through the compressor and, already in a liquid state, enters the condenser (which, in turn, heats up). After that, the whole action is repeated again.

Device and principle of operation

A floor air conditioner is a replacement for a window or a “mortise” split device that has become a new tradition. In addition to stationary (for example, columned) mobile, portable floor air conditioners are also common. Their work is no different from any refrigeration unit: in the monoblock there are 2 compartments isolated from each other with equipment:

• One contains a compressor that compresses the refrigerant to a pressure of 10 or more atmospheres, located at the rear of the monoblock.
• In the other is the evaporator - it completely turns the refrigerant into a gaseous state.

The compression of the refrigerant at the compressor and in the outer part of the circuit generates heat, which is removed by a fan. In the evaporator, the refrigerant during evaporation takes heat from the room, and the resulting cold is blown into the room using another fan. Both the external and internal coils are connected by a general ring circuit - the refrigerant in it goes along an annular path, changing its states and helping to bring heat out into the street, and generate cold for the room.

Superheated air is discharged not through the outdoor unit (which is not), like a split system, but through the “exhaust” hose or corrugation. Cooler air is blown into another hose (or corrugation) to cool the compressor - also from the street. The cooling system of the compressor block is served only by outside air, and the evaporator is blown only by air from the room itself, and not from the street.

2 Ballu BPAC-12CE

This model became popular as soon as it appeared on the market - it combines a powerful, productive compressor, compact dimensions and low price. Additional advantages are an easy duct installation system suitable for any window, automatic condensate removal and convenient electronic control with a “sleep” function. The flow direction can be adjusted quite precisely, and the fan has three operating modes for maximum user comfort.

Buyers say that the assembly of the case is neat, the monoblock is easy to move using the wheels, and the noise level is quite tolerable.The heating function is a bit lacking, adding which, one could get a truly universal device. But even in this configuration, as it is, the owners are quite satisfied with the monoblock, because, according to the majority, it does an excellent job with the main task - cooling.

What is an air conditioner

The idea of ​​a portable device for air conditioning in the room is reflected in the following design solutions:

• monoblock;
• floor split;
• window climate control.

Simple outdoor option

In its first interpretation, climate technology is popular floor-standing air conditioners. Here, all elements of the device are located in one case, which is simply placed on the floor in any convenient place. True, the corrugation that removes warm air must be taken outside.

Like any device, it has its pros and cons. Let's start with the first - among the bonuses:

• simple installation;
• high level of mobility;
• complete lack of built-in communications;
• condensate is collected in a special container;
• possibility of installation in any place;
• aesthetic look.

And here are the disadvantages:

• devices are rather bulky;
• high price;
• the need to create a special ventilation hole for the duct.

Split system without installation

Among the latest developments are mobile split systems. These devices without an air duct do not require laying special communications - the outdoor unit can be placed, for example, on a balcony. Among the indisputable advantages are quick installation of the unit, simple movement and performance indicators that are more efficient than other mono-analogues. As for the absence of corrugations, a freon line is used instead.

But there are also disadvantages - the location of the outdoor unit should be thought out in advance. In addition, the container for collecting condensate in the device will need to be constantly cleaned. And small the length of the same freon line just won't let you place blocks too far apart.

Old window air conditioner

This device received a mobility rating, of course, with a stretch. Although one of its main advantages is that the device works without an air duct. If necessary, you can quickly and easily dismantle. Other advantages are availability, long service life and the possibility of removal.

However, the solution is deprecated. And not the last role here was played by the fact that it limits the view and lighting. The unit simply looks unaesthetic compared to existing modern models. It is advisable to install it in non-residential premises.

How to choose?

Recommendations for choosing a mobile air conditioner are as follows.

1. Consider the area of ​​​​the room in which the air is cooled: mobile air conditioners, even with an air duct, will not “pull” a room over 25 m². For spacious, spacious rooms, only split systems of any of the varieties on the market are best suited.
2. The functionality of modern types of air conditioners can go beyond cooling or heating air. So, drying, cleaning, ionization are possible, there are even air conditioners with an ozonator function. The air conditioner can be turned on and off by a timer. Many models are equipped with a remote control without fail.
3. Some models, where it is difficult to drain condensate to the outside, have a special tray or container that collects water condensate.
4. The energy efficiency class from A to D is important for people who are used to saving on electricity (for example, in the northern regions of the country it is expensive). The best option in this case is A+++.
5. Noise background. The less noise in the room, the easier it is to live and work in it. It is unlikely that you will like a model that is not quiet, like a reading room, but noisy, like the music of a neighbor in a car under your window. 55 and 40 decibels in a room is a significant difference.
6. Dimensions and weight. Definitely do not need a mobile air conditioner weighing more than 25 kg and half the height of a person - these are already bordering on column models.

7 Rovus GS18009 Arctic Air Ultra

This compact air conditioner, in addition to the cooler, acts as a humidifier and air cleaner. It does not require any additional fastening, it can be installed directly on the desktop. Water tank capacity 0.61 l. Power consumption when cooling 72 Wwhich is very good for a mini air conditioner. There is an indication of inclusion and operating modes. The airflow is manually adjustable in three modes.

The air conditioner will automatically turn off if the tank fills with condensate. Customer reviews often mention the compactness and ease of operation of the device. Arctic Air Ultra cools small rooms in ten minutes. Replaceable filters last about six months, after which they must be changed.

What does such a device look like?

Externally, a mobile air conditioner is a rather weighty device, about 60-70 cm high and weighing about 30 kg.However, it is very easy to move it from corner to corner or even from room to room, since any model is equipped with rubberized wheels. Of course, complete with a floor air conditioner, you will also need to move an air outlet pipe, but this is not at all a laborious operation that any adult can do.

Absolutely all mobile air conditioners are equipped with a condensate collector. And you will need to empty this container in a timely manner so that water does not leak onto the floor or carpet. In modern models, when this container is filled, protection is triggered - and the air conditioner automatically turns off. And that means it stops cooling the room.

What are the advantages and disadvantages of such a device?

If you do not have the opportunity to install a full-size split system, then the decision to buy a mobile air conditioner is the most reasonable one. This unit has several advantages:

• mobility, even if conditional or relative;
• ease of installation;
• lack of bulky and technologically complex connections (drainage, freon, etc.);
• great option for accommodation in rental homes or offices.

There are several nuances - for example, noise, because the air conditioner compressor is not taken out, but is located inside the room itself. Also, the compressor heats up the space around it, and it is with this that the entire air conditioner as a whole struggles. But if you live in a rented apartment or cottage, or if you cannot install remote structures on the facade of the building, then floor air conditioners will be your salvation from heat or humidity. What factors will be decisive for you?

Varieties of designs

By design features, monoblocks and split systems are distinguished.

Mobile monoblock

The device consists of 2 parts separated by a partition:

1. Cooling air. The air from the room enters the evaporator, after which it is blown out through the shutters by the fan back.
2. Removing heat and cooling freon. For this purpose, a compressor, condenser and fan are used.

The principle of operation of the lower compartment depends on the method of heat transfer: the output of warm air through a hose to the street; moisture condensation on the condenser and drain into the sump.

Mobile split system

The mobile system consists of an indoor (refrigeration) and an outdoor (heating) unit. They are connected to each other by a freon pipeline and an electric cord. The internal one is installed indoors, the external one - on the facade, balcony. Communications are laid through holes in the wall, window frame.

Care rules

Which air conditioner cools the air in your home?

With air ductWithout air duct

In order for the device to serve you as long as possible, you do not need to leave it to work “until it breaks”. Every home appliance needs regular maintenance.

1. The filters that are inside must be cleaned regularly. Also, all places where dust accumulates must be wiped.
2. Do not install the air conditioner where it is exposed to direct sunlight.
3. Do not open the windows while the appliance is in operation, especially in hot weather - this gives an additional load, and the air conditioner starts to work in enhanced mode.
4. If you notice any malfunctions in the operation of the device (leaks, extraneous sounds, poor cooling), contact the service department.
5. Twice a year, it is necessary to do preventive maintenance by checking the air conditioner in all operating modes.

Floor air conditioner for home and apartment will help you maintain a comfortable indoor temperature in any weather.At the same time, it does not spend a lot of energy, it is easy to install and does not take up much space.

• Quartz heaters. How to choose the best model?
• Robot vacuum cleaners: rating of the best models, tips for choosing
• Air purifier for home. How to choose the best model. Purifier Rating
• Upright vacuum cleaners: rating of models, tips for choosing

Air conditioner selection options

Air conditioning is an expensive technique, and after installation it will be difficult to dismantle and replace a model that does not fit. Therefore, when choosing, you need to immediately take into account all the nuances - you have no right to make a mistake.

Installation location

There will be no strict recommendations on this item, since the choice of a specific model depends on the layout of the room and the possibilities for placing one or another climate control equipment.

It is clear that if you do not have a hypermarket with a powerful ventilation system, there will simply be nowhere to mount a ducted air conditioner. But other household and similar models themselves will tell you which installation method is right for you:

1. If you are going to order new windows and want to save on air conditioning, take a cheap window unit and ask the measurers to shortchange the frame, taking into account its installation in the opening.

2. If you want to take the air conditioner with you to the country house or just move it from room to room, look for a mobile outdoor option.

3. Are you planning to make repairs in the apartment? It's time to put a two-block wall or floor air conditioner - then carefully close the hole in the wall.

4. If you have suspended ceilings according to the project, you can hide the cassette unit behind them.

5. For a country house or a large multi-room apartment, it is better to install a split system with wiring for all living quarters.

Power

You should not choose it on the principle of "the more the better." Of course, it is easier to adjust the operation of a powerful air conditioner to suit your needs, which is almost impossible in the case of a weak device. However, it is not financially profitable to make an excess supply - your air conditioner simply will not work out the money spent on it.

Calculate the required power of climate control equipment, taking into account the main factors:

1. Room area - for every 10 m2 with a standard ceiling height of 2.5–2.7 m, 1000 W of electricity is needed.

2. Orientation to the cardinal points - if the windows face East or South, 20% must be added to the calculated power.

3. The number of people living in the room - in excess of the norm, each needs another 100 watts.

Noise performance

The volume of the operating air conditioner is an important parameter, especially if it is installed in the bedroom. It, in turn, depends on the power and design of the unit (monoblocks are noisier). Unfortunately, there are no completely quiet models, but you can always purchase a two-block version with maximum sound insulation.

The average noise performance of air conditioners ranges from 24-35 dB, but most modern models already have a "night mode", in which the sound level is reduced to a comfortable 17 dB.

Additional functions

Good expensive air conditioners can not only cool an apartment in summer, but also heat it in autumn or even in winter.

Modern climate technology may have the following additional functions:

1. Inversion - reducing the noise of operation (and at the same time the consumption of power consumption) due to a smooth change in the compressor power. Increases the cost of the device, but increases its energy efficiency.

2.Sleep Mode - a slow decrease in the temperature in the room, followed by the fan switching to the quietest mode.

3. Turbo - short-term start at maximum power (up to 20% of the nominal) for the fastest cooling of rooms.

4. I Feel - setting the thermostat to measure the temperature in the remote control area, that is, next to the owner.

5. Defrost of the outdoor unit and “hot start” are relevant functions for air conditioners with heating mode.

6. Dehumidify or humidify the air in the room.