How to choose a toilet installation + self-installation guide

Self-installation installation of the toilet bowl

Hanging tank design with installation

Before considering how to install a hanging toilet with an installation, you should select it, as well as determine the main components of the attachment mechanism.

The life of the plumbing device will depend on the quality of the chosen design. In general, the hanging toilet bowl consists of the following parts:

steel frame;

The sturdy frame is attached both to the floor and to the wall with special studs. It has rods for adjusting the height of the product. The drain tank of the structure is made of plastic, coated with a coating from condensate. On the front of the tank there is a special cutout in which the drain system is installed.

The choice of location and installation scheme for the toilet

A good location for the device is considered to be an impenetrable place away from the door, so you can choose the far wall. But at the same time, it should be borne in mind that all communications should be near the toilet so that they do not have to be brought across the whole room.

The main parameters for fastening the structure are:

the height of the toilet bowl - the average size is 430 mm;

It is better to install the toilet in a niche in which all the sewerage is hidden and the drain riser is located. If not, then you can build a drywall box.

Installation Tools

To perform all the work on installing the installation for the toilet, you need to have the following tools:

laser or regular level;

Installation Installation Instructions

Before carrying out installation work, you first need to bring a sewer pipe with a diameter of 110 mm, and then - water pipes.

1. Fastening preparation. Holes are made in the wall at previously marked places using a perforator. Dowels are inserted into them. In this case, fastenings can be performed both diagonally and vertically.The installation frame has 4 mandatory fixings: 2 on the wall and 2 on the floor.

After installing the frame, it is necessary to check the reliability of the structure, exclude its vibrations to the sides, otherwise it may tilt under heavy loads. After these steps, the do-it-yourself installation of the frame is completed.

How to install a toilet and bidet with your own hands: detailed instructions for beginners.

Connection of water pipes and sewerage

This is the most critical part of arranging a new toilet bowl, because if a leak appears in one of the pipes, then the entire structure and wall cladding on which the hanging toilet bowl is located will have to be dismantled.

False panel cladding

It is carried out after all plumbing work before installing the toilet. Since the structure is located in a kind of niche, it does not matter what material it will be sheathed with. Usually drywall is used for these purposes, and it is moisture resistant.

Fixing the wall hung toilet

Do-it-yourself installation of a toilet bowl should be carried out taking into account the following rule: a rubber backing must be laid between the tile and the toilet bowl, which will protect not only the facing material from cracking, but also the bidet itself. If for some reason the factory substrate is lost, it can be replaced with a thick layer of sealant. When solidified, it will play the role of a cushion cushion.

Hanging toilet - it's aesthetically pleasing, stylish and reliable

All work on its installation can be done by hand, taking into account the above tips and instructions for installation.

Design features

Seeing a hanging toilet, a rare visitor to a plumbing store will not be puzzled by the question: how does the structure hold up, what ensures its strength? After all, the toilet bowl does not have the usual legs.Fasteners that guarantee reliability are also not visible on the surface.

Wall hung toilet

The installation gives stability - a massive steel frame, which is often sold separately from the toilet. It can be attached only to the wall or additionally to the floor. From above it is covered with a plasterboard false wall, and the illusion is created that the plumbing fixture really does not rest on anything.

Since the drain tank, along with all communications, is hidden behind drywall, most often the structure is placed in the niche of the bathroom, where the water and sewer pipes are located. If you choose another place, then keep in mind that you still need to make a recess of 20-25 cm in the wall to accommodate the tank. It has 4 attachment points, 2 of them on the floor, which allows you to set the desired height. The tank itself is made of plastic, not ceramic, as usual. Access to it is possible through a panel with a button located above the bowl. Through it, you can turn off the water or make minor repairs.

Installation of several installations in the bathroom

The bowl of such a toilet bowl is the only thing that can be seen from the whole structure, so its choice must be approached especially carefully. Design developments allow you to choose:

• color - from classic white to acid or iridescent shades;
• shape - from round and oval to rectangular and other, more complex modifications;
• material - from ceramics and steel to plastic, polymer concrete and glass.

Advice. From a practical point of view, plastic is not very convenient: it is easily scratched. Polymer concrete does not perceive cleaning by all means. When choosing between faience and porcelain, give preference to the latter. Thanks to the smoother surface, it needs to be cleaned much less often.

Which installation to choose for the toilet

When buying a wall-hung toilet, the type of supporting structure, installation method, location, price and reputation of the manufacturer must be taken into account. This section will cover the technical aspects of choosing the right installation for you.

Block or frame installation

There are two main groups of installations for toilets, based on a different approach to the way they are installed.

Block installation

The block design consists of individual elements that are attached directly to the wall. Communications in this case have some freedom of placement. Such a kit consists of only the most necessary parts, so it is relatively cheap. It can only be installed on a load-bearing wall, which takes on an additional load. It will be quite difficult to add anything to such an installation during operation or replace the main components.

Frame installation

The frame structure has its own rigid frame, which can be easily hidden behind a decorative plasterboard wall. This type of installation rests on the floor and expands the options when choosing an installation location. The disadvantages of this option are the larger dimensions and the high cost of the kit.

Choosing an installation depending on the installation location

Manufacturers of wall-hung toilets have provided several options for installations, adapted to various features of the layout of bathrooms.

Standard installation

Such an installation has typical dimensions: 112 cm high, 50 cm wide and 12 cm deep. It is usually installed in medium or large toilets.

Low installation

This option has a height limit of 82 cm.It is used when there are structural elements in the room that prevent the installation of a higher support.

Corner installation

This type of installation is a great way to save space in a small bathroom by compactly installing the equipment in the very corner.

Double sided installation

This design consists of one frame and two toilet bowls, which are fixed on it from opposite sides, separated by a light wall. A good budget option that fits well into the space of a public toilet.

Linear

Linear installations allow you to place several of the same or different plumbing fixtures side by side, including a toilet, bidet, urinal or sink. This option is often found in shopping, office and entertainment centers.

What are the flush control methods?

When choosing the type of flush control unit, hygienic requirements, ease of use and economical water consumption are taken into account. There are only three most common options here.

Dual mode button

A good budget option, which includes a couple of buttons for an economical (up to 6 l) and a full drain (6-9 l). The volume of discharged water is usually amenable to pre-adjustment.

Flush-stop

Here, one button is activated, giving a command to open and close the valve. Such a system allows you to accurately control the supply of the required amount of water.

Proximity sensor

The device includes an infrared device that reacts to the hand raised to it. Such equipment is considered the most hygienic. It is installed in medical institutions and public toilets.

Parameters to pay attention to

Having decided on the type of installation you need, it's time to carefully consider the technical features of the model you like.

What is the weight of the installation?

Before buying, be sure to ask the seller and check in the product passport for information on the maximum loads for which the design is designed. The most reliable installations withstand more than 400 kg. The margin of safety is directly related to the service life of the device. Choose a model that saves you from unexpected emergency repairs.

What you need to know about the installation tank

Cheap installations are often equipped with a welded plastic tank. Solid-cast containers are considered more reliable. Responsible manufacturers cover them from the outside with a layer of insulating material, which prevents the deposition of condensate on the outer walls and greatly reduces the noise that occurs when water enters.

Installation cistern with soundproofing.

Pay attention to installation fittings

If you want to save yourself from leaks, buy equipment equipped with bronze or brass fittings. They do not change their structure and do not corrode for many decades. Steel products do not have similar qualities, but are cheaper.

The best installations for toilets in the middle price segment

The average cost should be understood as a price tag of no more than 60 thousand rubles. Such installations are very high quality and functional. Most of them support the installation of sensor flush systems.

OLI Oli 74

4.9

★★★★★
editorial score

95%
buyers recommend this product

The installation is made of durable 2 mm steel and protected with an epoxy coating to prevent corrosion.

The frame is able to withstand weight up to 400 kg.The glossy chrome Karisma flush plate is included and has settings up to 3 and 7 liters.

The fan outlet is adjustable in depth in several positions. The set of water occurs almost silently thanks to the valve, which does not allow the pressure to increase. Noise does not exceed 19 dB.

Advantages:

• Pneumatic control;
• Mounting kit included;
• Fast installation;
• Compactness;
• Very quiet operation;
• 10 year warranty.

Flaws:

There are fingerprints on the button.

This model fully meets the "price-quality" parameter.

Creavit GR5004.01

4.9

★★★★★
editorial score

93%
buyers recommend this product

This model does not demand special leaving and is easily mounted to a floor. A huge selection of flush buttons allows you to choose the one that fits perfectly with the design of a particular washroom. The kit, in addition to the system itself, includes a tank and fasteners.

Advantages:

• Quick installation;
• Low noise level;
• Impact resistant design;
• Load capacity 400 kg;
• Large selection of flush plates with different designs.

Flaws:

The tank fills up in about 2 minutes.

Creavit GR5004.01 will make the design of the bathroom aesthetic and stylish.

Vidima W3714AA

4.8

★★★★★
editorial score

89%
buyers recommend this product

The model was created for toilets with horizontal outlet. The system is attached to the wall and does not occupy usable space. The capacity of the flush tank is 6 liters, there is also an economical drain mode (3 liters). Robust design holds up to 400 kg.

Advantages:

• Adjustable steel frame;
• Flush button included;
• Coating of the tank and pipes, preventing the appearance of condensate;
• Quiet operation;
• Withstands a lot of weight.

Flaws:

Over time, the flush button becomes loose.

Vidima W3714AA is a fairly versatile and easy-to-install installation, quite adequate for the money.

TECElux 9 600 400

4.7

★★★★★
editorial score

86%
buyers recommend this product

This is a system with air purification function and touch control. The activated carbon ceramic cartridge is recommended to be replaced every 5 years. Filtration starts only when a person approaches, which saves energy.

The set comes with a lid with a container, in which hygienic tablets for air deodorization are inserted.

Advantages:

• Smooth adjustment of toilet bowl height;
• Large tank for 10 l;
• Water supply from above or from the side;
• Corner installation;
• Serviceability;
• 10 year warranty.

Flaws:

Cannot be mounted on a non-permanent wall.

The design and functionality of the TECE installation guarantees exceptional hygiene in use.

Grohe "Rapid" SL 38525001

4.7

★★★★★
editorial score

85%
buyers recommend this product

See review

The self-supporting steel frame system is installed in front of a wall or partition. Powder coating facilitates subsequent cladding.

The adjustable pneumatic flush works in three modes: volumetric, continuous or start/stop. The button can be mounted on the top and front.

Advantages:

• Quick and easy height adjustment;
• Protective casing of the revision shaft;
• Reduced water consumption;
• Build quality;
• Mounting depth adjustment.

Flaws:

Supplied without mounting accessories.

A wide range of adjustments allows you to adjust the system to a specific room and toilet model.

Installation prices

Installation is a fairly expensive product among plumbing products.This is due to the complexity of the design, its functionality and who is the manufacturer. Especially strongly these factors influence such criteria as price.

This begs the question - why are the prices of different models so different? It's all a combination of many factors. For example, brands. Not every manufacturer is considered popular.

Among other things, a number of criteria influence the final price of installations. For example, these include the thickness of the walls of the tank, as well as the quality of the material and frame.

About the frame you need to talk separately. It must be strong enough, ready for a change in height, and also ready for cladding. For example, all models in our rating can easily withstand fairly large loads (some models can withstand up to 400 kilograms of weight at a time).

The quality of the fittings also contributes to the price, as well as options that greatly facilitate installation and further use.

Many factors influence the final price.

Model comparison

To make it easier for you to compare the models described earlier, we decided to organize all their main characteristics in one table. So you can choose the installations you like and compare them with each other in order to identify the best purchase option.

Model name	Dimensions (cm)	Flush tank capacity (l)	Mounting height (cm)	Cost (rubles)
GEBERIT Duofix	53x36x34	6-10	112	35 000 – 40 000
TECE 9300000	50x60x112	10	110-120	12 000 – 14 000
Grohe Rapid SL 38772001	56x36.5x35	3-6 l	110	25 000 – 30 000
GEBERIT DuofixBasic	50x112x12	3-6	112	10 000 – 12 000
Viega Eco Plus	49x20x113	10	113	14 000 – 16 000
Ideal STANDARD W3710AA	52x22x100	6-3	110-130	9 000 – 12 000
Villeroy & Boch ViConnect 92246100	52x112x20	10	112	12 000 – 14 000

Manufacturers of quality installations TOP-10

The list of the best installations for hanging toilet bowls includes products of Russian and foreign production.

TOP-10 most popular and high-quality installation systems.

Cersanit Delfi Leon. Ready-made set for the installation of a wall-hung toilet, which includes: frame, anchor bolts and studs for fastening, cistern, flush button, toilet bowl and seat. You don't need to buy anything extra. The system is designed for floor and wall mounting. The uniqueness of the model is the small width of only 35 cm, so it can be installed in a fairly narrow space.

Geberit Duofix. The model differs in power and reliability. The massive frame is equipped with an additional jumper, so the system is able to withstand a very large weight. The kit includes the necessary fasteners for installation, a tank and a flush button. A slight downside is the frame height of 113 cm, which will only fit into a suitable space.

Grohe Rapid SL. The installation provides for mounting to the floor and wall. The model is universal, since the access to the supply and drainage of water can be made from any side. The flush system has several positions: "stop-drain", maximum and constant for cleaning. The kit includes the necessary mounting parts, a flush button and special insulation against the noise of water entering the tank.

TECE 9.400.005. The system is in great demand among those who value quality and simplicity. All parts of the system can be easily removed for cleaning or repair. Buttons for draining in the design are presented in a large assortment. The tank fills silently. The manufacturer provides a 10-year installation warranty.

WISA 8050. The system is fixed to the floor and to the wall. The manufacturer equipped the installation with a powerful and strong frame made of durable metal.Installation of the structure is carried out to the floor and wall. All materials used in the system are of very good quality. Can be mounted in a corner. However, the system weighs quite a lot and is more expensive than analogues. Parts for installation are difficult to find.

AlcaPlast Alcamodul. Economy option, which is attached only to the wall, so choose only a load-bearing wall for installation. The system can be installed at any height as desired, since it is not connected to the floor, however, this is also a minus, since all the pressure falls only on the wall. The kit includes only a tank, fasteners for installation and bowls. The system is easy to install yourself.

Vitra Blue Life. The special design of the system is thought out for its placement in a space cluttered with sewer pipes. The frame is equipped with additional legs located at a small distance from the center. The legs do not perform the function of support, the entire load falls on the wall, so the toilet must be attached only to the supporting wall. All parts of the system are provided in good quality, so the manufacturer gives a 5-year warranty.

TECE lux 400. The model performs not only its immediate functions, but also purifies the air using a special filtration system. The system is considered the benchmark among wall-mounted toilet installations. It is equipped with a volumetric drain tank with several modes, as well as a touch control system. All of these features significantly affect the price of the product, which is very high.

Jika Zeta. The design provides installation to a floor and to a wall. Includes mounting hardware, dual flush cistern, release button, oval bowl and lift seat. In general, the design is reliable.Nevertheless, it happens that with poor-quality installation on fasteners, leaks may occur, and the gaskets included in the kit are of poor quality.

SANIT Ineo Plus. The system is designed for floor and wall mounting. Water drain is controlled by two buttons: maximum and economy. The kit includes a cistern, a frame, a flush button and a set of fasteners.

Monoblock

The release of monoblocks has become a real alternative to installation due to a number of advantages that “compact” toilets do not have:

• simple equipment - a one-piece toilet bowl;
• ergonomic shape of the bowl - it is comfortable to sit for any member of the family, even with disabilities;
• smaller linear dimensions, and therefore it needs less space than the classic "compact" toilet;
• easy care - the absence of a "dead zone" simplifies the cleaning of the bathroom;
• easy installation;
• the presence of a microlift - the lid falls smoothly and silently;
• some models are available in the form of a shower toilet (this function also appeared in the "compact" toilets);

no leaks in the drain tank;

efficiency - most models use several drain modes.

The disadvantages include:

• higher price compared to compact models;
• the inability to repair the tank drain system (theoretically, it is possible to replace a failed element, but in practice it is extremely difficult) - only a complete replacement of the fittings, which is quite expensive.

Criteria for choosing a toilet bowl with installation

Installation - a metal structure that should be mounted inside the wall. It acts as a frame on which the fittings of the toilet bowl are fixed.

All fasteners are masked with drywall or tiles, after which the room takes on a neat appearance and becomes stylish. Outside, there is only a suspended model of the toilet bowl and a button for draining the water.

The device kit includes:

1. Frame. This is one of the most important elements, which accounts for the main load. Therefore, it is made of durable steel. A tank for draining water is attached to the frame. This is an important point, because the quality of the entire structure and its durability depend on the correct installation.
2. Toilet. Modern installations are distinguished by their versatility. Therefore, with them you can use both suspended models and floor options with a hidden tank. The hygiene device can be made from various materials and painted in any color: from classic white to black or bright.
3. Button for draining water. This is a small but important design element. It can be equipped with an economical flush or equipped with a “flush-stop” function that allows you to stop the flow of water by pressing the button again.

These are the main points that you need to pay attention to when buying. Also, to make the right choice, you need to pay attention to the following:

First of all, you should decide on the installation site of the product, find out its parameters. It is on these characteristics that you should be guided when choosing an installation. If it was not possible to find a model suitable for the parameters, you will have to purchase an option equipped with a movable structure

In this case, the frame can be adjusted to the required dimensions.
If you plan to purchase a complete set with a toilet, pay attention to the quality of the hygiene device.
After the appropriate model is selected, check its completeness. In the absence of even a small element, installation will not work

Contents may vary depending on the model. However, it must necessarily include: a supporting structure, mounting hardware, a tank for draining water, a drain key, an adapter, noise and waterproofing materials.
Consider the method of fastening the structure. For some options, you will need to purchase additional mounting materials.
Decide on which wall the device will be fixed on. If a load-bearing wall is selected, then the frame can be fixed with anchor bolts. If accessories are not included, purchase bolts separately.
Interesting models with additional features. It could be water saving system or the option to absorb unpleasant odors. All this affects the cost, so you need to decide in advance on their need.

Wall hung toilet

Many are afraid to install hanging-type toilets in bathrooms, since such a design seems unreliable. This opinion is erroneous, since in reality the toilets with the installation can easily withstand a load of up to 400 kilograms.

This strength is provided by a steel frame called the toilet installation system. This is the basis for the structure, which is mounted to the surface of the floor and wall. Some models are attached only to the wall.

The metal studs that connect the toilet to the installation frame pierce the facing material. Due to this technology of fastening, the bowl is firmly attached to the wall. The pipes and the tank itself are hidden in the wall, and only the toilet bowl remains visible.

Having considered the mounting options, we will find out which installation for the toilet is better.

Models of this configuration are characterized by large legs and an impressive frame size. The drain tank, made of plastic, is mounted to this frame, but it is decorated with facing material.

For manipulations with the tank, a small hatch is cut out or a removable panel is installed through which the water is shut off or malfunctions are repaired. If the lining does not allow installation behind the tank, a niche of the required size is cut out in the wall, and the drain button is installed in the place where the owners of the house wish.

To figure out which installations with a toilet will fit the bathroom, you should consider the following types of devices:

Block installation. The design consists of a plastic tank, which is placed in a strong frame of metal fittings. Such an installation system is equipped with the fastening elements necessary for a solid installation of the toilet on the wall. The block-type toilet installation is completely wall-mounted, so it is applicable for both hanging and floor-standing bowls.

It is recommended to install this design if the bathroom has a niche of suitable depth. This may be the far wall of the restroom, which is subsequently decorated with a plasterboard partition.

It is important to consider that the installation option is mounted only on a load-bearing wall. Plus block-type designs - budget cost

• Frame installation. Such installation for a toilet bowl differs in the increased reliability and stability. This allows you to securely fix toilets, as well as sinks and bidets. This is due to the material of which the structure consists and the technology of fixing to the surface.The advantage of this option is the ability to mount on the wall, as well as on any site (corner or straight plane).
• Corner installation. A popular option for installing hanging toilets. The plumbing fixture is placed in the corner of the room, which saves free space. This is true in apartments with a small footage of the bathroom. Such an installation for a wall-hung toilet is also attached to the floor or to the floor and wall at the same time, which ensures the strength of the finished structure.

After reviewing these points, you can understand what a toilet installation is and choose the appropriate option.

Before choosing an installation for a wall-hung toilet, you should decide which design features are preferable. The installation location also plays an important role when choosing a mounting system.

It is worth taking into account that the frame will be hidden behind a decorative partition. Therefore, initially choose a quality version of the product

Obviously, it is impossible to purchase the ideal device, since even the most advertised instance has pros and cons. However, the plumbing market is vast, so you can find models that are good enough.