How to properly care for a plastic window so that it lasts a long time

Important advice from professionals on the care of plastic windows

To keep the window beautiful for a long period and did not require replacement and repair, it must be cleaned from contamination in a timely manner. At the same time, take into account the advice of professionals:

Remove protective film after installation. It is better to remove polyethylene immediately from new windows, since it is only necessary during transportation and installation. In the future, the coloring pigments of the film can change the shade of the plastic, and the connecting agent will eat in so much that no solvent can solve the problem.
Avoid harsh household chemicals. For cleaning, a solution of soap and a soft fiber cloth is sufficient. The content of alcohol, acid, alkali, abrasive, chlorine, acetone in the products is unacceptable.
Use professional care products offered by developers. When buying windows, it is more convenient to immediately purchase additional cleaning mixtures designed for this model, taking into account all its features.
Sanding minor damage. Even careful maintenance of PVC windows does not exclude the occurrence of scuffs and cracks. It is necessary to eliminate such defects at home in a timely manner, selecting the appropriate compositions, tools. For colored plastic, purchase pencils containing varnish and retouch

The feeling of insecurity in the quality of the procedure with your own hands is a sign that it is better to entrust the restoration of the surface to the master.
It is important not to forget about systematic ventilation. Under the influence of excess moisture, the structure will begin to deteriorate, loosen

It is required to ventilate the room, improve the ventilation system, do not fill the window sill with flowers, an aquarium, which will humidify the air.

Plastic window lubrication

Rice. 7. fittings lubrication

For proper operation, the fittings must be lubricated with oil once a year. Before lubrication, the necessary mechanism should be cleaned of dust and dirt. This can be done with a vacuum cleaner, which is carried out with a small nozzle through hard-to-reach slots with loops.

Oil is applied to the cleaned fittings. Almost any machine oil is suitable, as well as a means for lubricating parts of a sewing machine. The only caveat is that the composition should not contain resins. Resins have a destructive effect on the anti-corrosion coating of fittings.

The oil is usually sold in the form of a spray, so it is convenient to use. After application, a thin sticky film should be visible on the window details, which ensures easy sliding of the parts in the future. Immediately after using the spray, the flaps may close with force, but this is a common practice. During the next 3-4 openings, the oil will be evenly distributed over the hinges. The window will open much easier.

It is recommended to provide the apartment for cleaning to the cleaning company specialists twice a year or after repair. They carry out a comprehensive cleaning of the premises, and among the additional services there is cleaning of window openings, which includes lubrication and even gluing a sealant.

Glass washing

Many housewives love plastic windows not so much for keeping the heat in the house as for ease of maintenance.

What care products will be needed

Tools for cleaning plastic windows are not very large and include:

• any universal detergent that can be replaced with glass and mirror cleaner,
• microfiber rags that do not leave streaks (they can be replaced with sponges, paper towels or ordinary cotton rags),
• you can also use a glass cleaner.

How to wash glass

• Prepare a soap solution (dissolve 1 part dishwashing gel in 10 parts warm water).
• A microfiber cloth or a regular cloth is moistened in a solution and wiped with a double-glazed window and a profile.
• The detergent is washed off with a cloth moistened with clean water, you can walk along the window with a glass cleaner, if you have one.
• Glass is polished in a circular motion with a microfiber cloth, and plastic is simply wiped with a dry cloth.

To wash the PVC profile, you can also use special products that simply impregnate the fabric and wipe the window. According to experts, in this way you can avoid divorces and save money for a long time. great look plastic.

How to lubricate the rubber bands (seal) on plastic windows?

The main task of the lubricant for the seal is to protect it from moisture and cold. There are many ways to accomplish this task. The main thing to remember is that they should not contain alcohol, alkali or solvents. These substances disrupt the rubber structure and reduce the possible life of the seal.

professional tools

Complete care kits for PVC windows. It is difficult to find a professional tool for sealants, basically all formulations are aimed at caring for rubber products in general.

The manufacturer claims that FENOFLEX retains the elasticity of window rubber parts, slows down their wear by 20-25%, and increases rubber resistance to critically low temperatures.

All substances in the composition are biodegradable, non-toxic and safe for humans. Due to the absence of any solvents and alcohol in the production, the composition does not affect the texture of plastic and rubber in any way.

Fenoflex is presented in a small 50 ml tube. This amount of funds is enough for several years of use. The average price of a set is 500 rubles.

General purpose silicone lubricants. Technical silicone is one of the best and most affordable ways to care for seals and rubber in general. It has a low viscosity, lays down in an even layer, protects the seal from the harmful effects of moisture, and slows down wear. Silicone is odorless and colorless, so it can be used for sealants of any color. The temperature resistance of silicone is from - 50 oC to + 230 oC.

You can buy silicone grease at a hardware or hardware store. It is usually sold in small soft tubes with a volume of 70-100 mm. The average price of a lubricant is 100-120 rubles.

WD-40 is perhaps the most recognizable of all the things that can be used to lubricate rubber bands on plastic windows. The original composition was developed to protect the skin of space rockets from corrosion, but soon a lot of possible applications in everyday life were found for it. The basis of the product is mineral oil, which covers the surface with a waterproofing film. Also in the composition there are various hydrocarbons that reduce the viscosity of the product.The product is sold in the form of an aerosol, the kit has a small tube for point distribution of the product, making it very easy to distribute it along the entire length of the seal.

The aerosol is sold in volumes from 100 to 420 ml. The price, depending on the amount of funds, varies from 80 to 190 rubles.

Non-professional means

Glycerin is a colorless viscous liquid. It has a special application in cosmetology and traditional medicine, it is a by-product of saponification of fats. Chemists classify glycerin as an alcohol, but unlike other substances in this group, it is not dangerous for PVC.

Glycerin softens the seal, makes it more elastic, covers it with an invisible film.

The disadvantage of glycerin is that it dissolves easily in water, that is, it has a low level of waterproofing.

You can buy the composition at a pharmacy. Its price is about 10 rubles. for 25 ml.

Vaseline covers the seal with a dense transparent layer. It perfectly softens the rubber, makes it more pliable. Petrolatum insoluble in waterthanks to what perfectly protects a sealant from influence of moisture in air and rainfall. Its frost resistance is very low - only down to -25 ° C, melting point - + 27 ° C. Due to the low resistance of such a lubricant to temperature changes, the protective layer does not last long. Of course, petroleum jelly is not ideal, but it is better than lubricating the rubber seals in plastic windows with alcohol-based or solvent-based products.

Vaseline is sold in pharmacies and cosmetic stores. The average price fluctuates around 25 rubles. for 75 ml.

Operation of windows (video)

Plastic windows are able to please with their work for many years, but for this you need to follow some recommendations:

• Rubber seals are lubricated with silicone-based grease, and fittings are lubricated twice a year;
• The sashes are washed with a soapy solution and special acid-free products, otherwise the shade of the paintwork will change;
• To avoid condensation, ventilate the room and keep the humidity at 50-60%%;
• Eliminate mechanical and shock loads on the window structure;
• Self-repair of aluminum structures under warranty service is not allowed.

How and with what to lubricate plastic windows

The service life of window fittings directly depends on proper care for accessories. Moving parts must be lubricated periodically, at least once a year. It is not necessary to do this for the first two years - there is still enough factory grease inside.

What lubricant to lubricate plastic windows?

For lubricating window fittings unsuitable vegetable and butter, margarine, petroleum jelly, shoe lubricants and other household lubricants.

On the moving parts of the window can be applied any machine mineral oil, preferably without additives, or a special lubricant for PVC windows - it is sold or given as a gift to a completed order by many plastic window manufacturers, including in sets of several products intended for different parts of the structure.

How to lubricate sealing gum on plastic windows?

The seal performs an important function - it ensures a snug fit of the sash to the frame.So that it does not dry out, does not crack, remains soft and elastic, it, like accessories, must be regularly lubricated.

Only special lubricants are suitable for the seal. It is advisable to use compositions designed specifically for seals in PVC windows from special kits. If such a tool is not at hand, a silicone-based lubricant will do.

It is important that the bottle indicates that the lubricant is suitable for rubber.

How to lubricate plastic windows to make them easier to open?

Lubrication of fittings is a necessity if windows open and close only with effort. As a lubricant, you can use special compounds for PVC window fittings, or any technical oils.

The problem with the heavy movement of the valves may be due to a breakdown of the fittings or a violation of the adjustment of the structure. If lubricating the parts does not help, you should contact the master.

How to lubricate plastic windows yourself?

Before greasing it is necessary to remove dust, dirt and old grease from the moving parts on the sash. For this, a hard brush, cotton or viscose fabric is suitable. It is convenient to remove dirt in hard-to-reach places with a cotton swab.

Specialty window oils are usually available in cans with a sprayer or nozzle. It is convenient to use a medical syringe as an oiler for conventional technical oils. 1-2 drops or 1-2 "zilch" for each moving element is enough. After lubrication, it is necessary to open and close the sash several times completely, put it into the ventilation and micro-ventilation mode for even distribution of the substance.

How to lubricate the handle of a plastic window?

The handle itself does not need lubrication, only the moving components of the sash that the handle sets in motion are lubricated.

Interesting moments of operation

It is important not only to create the necessary conditions in the room, but also to respond correctly to situations that arise. Consider the basic subtleties of using plastic windows so that you can figure out what is good and what is undesirable.

The normal humidity level in an apartment is usually 40-50%. It is this level that must be adhered to in the process of living in your home.

The apartment must be provided with ventilation. Usually exits ventilation is in the kitchen, toilet and bathroom. It is necessary to periodically check the hood for serviceability and, if problems are found, immediately begin to solve it.

High-quality plastic windows perfectly isolate the room from environmental influences on the street. At the same time, excess moisture may form in the room with such tightness. To avoid this problem, it is necessary to ventilate the room a couple of times a day for 10-15 minutes. This is done at any time of the year.

To avoid condensation on the surface of the plastic window, ventilate the room regularly

Too wide a window sill that prevents the warm air from the battery from rising up is an undesirable element in the room. Its width should not interfere with the normal circular circulation of air.

Now about the plastic windows themselves. They should be protected from contamination by washing off dust and dirt with warm water or soapy water. The rubber seals are treated with a silicone-based lubricant and the fittings are lubricated twice a year.

When winter cold weather approaches, the strikers of the clamping locks are placed in the "winter" position - this allows you to ensure tightness in the place where the frame adjoins the sash.

Proper care of the plastic frame and double-glazed window

The durability of use is due to proper care. This is especially true in the winter season, so you need to know how to care for plastic windows in winter.

A hex wrench is used to adjust plastic windows.

In order to prepare the window for the winter, you will need tools and equipment. These include:

• rags and napkins;
• soft brush;
• hexagon;
• sealant lubricant;
• machine oil.

Sequence of work

First of all, it is necessary to wash the windows from dirt and dust accumulated during the spring-summer period. Soft rags and napkins are used, as well as non-abrasive detergents. Stubborn soiling must not be removed using a knife and cleaning powders. Before you start washing windows, you should brush off the dust with a brush.

Dirt accumulated over the summer can make it difficult to open and close the window

After that, you need to start adjusting the fittings. You can do this with a hexagon. In order to avoid the penetration of cold into the room in winter, it is necessary to switch the clamps on the sashes to winter mode. Thus, the fit of the window frame will be stronger.

Switching the window to winter mode ensures a tighter fit of the frame

It is important to lubricate the fittings with oil. After applying it to the parts, you need to open and close the sash several times, this will help the oil to distribute

This procedure should be repeated throughout the winter, most importantly, do not do it in severe frosts.

It is necessary to lubricate window mechanisms several times a season.

The seal also requires attention. Rubber products wear out over time and cease to fit snugly, this affects the tightness of the window. You can wash the gum right on the window or by removing it. The procedure must be carried out with the use of a detergent, after which it must be wiped dry. The process is completed by applying a silicone agent for rubber seals.

Silicone grease prevents rapid wear of the rubber seal

If you see that the window fogs up in winter or condensation collects, then you need to contact the experts. They will check the condition of the rubber seal and replace it if it is worn out.

It is important to replace parts on time, this will help extend the life of the window.

Insulating glass maintenance

Provided that a plastic window is properly installed, a double-glazed window will last approximately 40 years. When installing, make sure that the windows are in a special protective film that will protect them from scratches during transportation and installation. Such windows do not need to be painted or pasted over for the winter, but they still need to be washed at least twice a year. Do not do this at low temperatures, as the glass may burst from contact with water.

Window sill care

The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, eventually forms yellow circles. These stains are very difficult to remove, and sometimes simply impossible, so you should use a special self-adhesive film on the windowsill, which can be white or another color, as well as trays for indoor plants.

The window sill is protected from moisture with a special film

The texture of the window sill may vary from manufacturer to manufacturer. They are smooth, porous or rough. When selling, the consultant usually talks about what kind of material is used for the window sill and how to wash off the dirt. However, some features should be taken into account, for example, a rough window sill can be cleaned using a hard brush, but in no case should a scraper or knife be used.

Slope care

Slopes also need maintenance, but the means for this directly depend on the materials from which they are made. If they are made of plastic, they will not require special care. They are easy to wash and clean from dust and dirt. A feature is the need to replace the sealant, which, a few years after installation, is completely removed and replaced with a new one.

After several years of operation, the sealant must be replaced.

If the slope is made of drywall, then it is covered with paint that can be washed and updated if necessary. When using cork or bamboo, it is enough to systematically wipe them with a damp cloth from dust.

Plastered slopes should not be washed, because they are unstable to moisture, they can be wiped with a damp or dry cloth. Acrylic sealant should be used at the joints, and the surface should be painted in a timely manner.

Following simple recommendations for the care of plastic windows, you can use them for a long period of time.

Caring for plastic windows in winter and summer

Depending on the season, the seal behaves differently: under the influence of high temperatures, it expands, and in the cold, it contracts.To extend the service life of the material, it is necessary to systematically adjust the sash pressure. The procedure minimizes the load on the fittings, increases the period of operation of the entire structure.

Adjusting the PVC window, based on the season, can be done by hand. To do this, it is better to take a flat screwdriver or a six-sided wrench. Construction preparation instructions:

1. Find places that need reinforcement of the porch and rod.
2. In accordance with the marker applied to the locking element, turn the pin in the required direction.
3. Winter is a period when a snug fit to the frame is required. To do this, turn the marker to the inside. Setting for the summer involves twisting it to the outside.

The important procedure will take a maximum of 15 minutes, so you can avoid many breakdowns in the future. You can learn more about switching the device to summer mode when watching the video:

Useful tips from home masters

If the handle turns tightly, all moving fittings (eccentrics, hinges, pressure pads and mechanisms) must be treated with grease, it is most convenient to do this with an oil can (cotton swab, brush) and machine oil. If the windows sweat a lot, ventilate your home more often, also try washing the double-glazed windows with laundry soap. If you accidentally open the window so that it hangs on one hinge, press its upper extreme corner against the frame with one hand, and with the other turn the handle until you bring it to the closed position. This should close the window normally

If, when opening the sash for ventilation, it opens at the same time, you need to pay attention to the lower eccentrics.In this mode, they should cling to a large pressure pad at the bottom of the window near the hinge

If the process does not work as it should, there may be problems with the platform or eccentrics.

Installing plastic windows allows you to save a significant part of the heat in the room, thereby saving on heating bills. However, such savings are possible only with properly operated windows. Therefore, regularly pay a minimum of attention to the PVC profile, and then you and your family will always be warm and comfortable!

care properly

Among the many advantages of PVC windows, there are also disadvantages. For example, the sensitivity of plastic to dyes. Due to the granular structure of the slopes, often even the slightest dust clogs into micro-holes, and the appearance deteriorates - the surfaces become gray, look sloppy. Therefore, regular cleaning is the key to beautiful windows for a long time.

Another problem is complex fittings. Like any mechanism, it needs timely cleaning from dust and lubrication. The rubber seal also needs to be lubricated periodically so that the material does not dry out and crack. Various dubious offices often offer comprehensive care for fabulous money, however, these procedures are easy to do with your own hands twice a year for a long and reliable service.

One of the very first mistakes that owners make is to remove the protective film from the windows immediately after installation. In fact, you first need to eliminate all construction debris and do a full cleaning of the room: the dust raised during these processes will end up on the freshly installed plastic, which can adversely affect the color.However, keeping the tape on the profile for too long is also not recommended: due to sunlight, it will become brittle, crumble, and it will become impossible to remove with one jerk.

Any mild detergent is suitable for washing plastic - from soapy water to special formulations. You can use any soft napkins or rags: microfiber shows itself well - it does not leave lint, streaks, it absorbs moisture well.

Why plastic windows break

No matter how reliable and easy to use plastic windows, even this practical system sometimes fails. We will analyze the most common causes of failure and find a solution to the problem.

If spots appear on the plastic profile, then you can try to wipe them off with a melamine sponge (inexpensive and lasts a long time). If she did not cope, then you need to look for specially designed products for cleaning PVC windows. In no case should you use a knife, scraper or solvents: they remove the stain along with the plastic, and most importantly, the protective layer. As a result, stains in this place will form faster and even from ordinary household dust.

Seal care

Seals should also be periodically treated with special compounds that protect against wear, damage, drying out and deformation. If preventive treatment is not carried out, then the rubber loses its protective properties. The sash begins to cling poorly to the frame, and dust, odors, and noise enter the house.

Treatment for prevention

Wipe the rubber seal first with a damp cloth. Then wipe with a cloth with a few drops of silicone oil. After 35 minutes, remove excess oil with a dry, clean cloth.

How to replace yourself

Even with proper care, the sealant can lose its properties. Elasticity decreases, cracks appear. You can replace the seal yourself if you perform a series of sequential steps:

determine the type of seal and make measurements;
carefully remove the old seal;
clean the surface of contaminants, carry out degreasing;
the corners of the frame should be smeared with glue;
proceed to install the seal in the grooves;
at the last stage, the rubber insert is wiped with silicone grease.

When inserting the seal into the holes, it does not need to be pulled and squeezed too hard. The excess part of the rubber is cut off, and the joints are glued with glue.

Mosquito net care

The mosquito net is called upon protect the premises from insects. It comes in different types, but these differences do not affect the method of care. It is universal and does not require special conditions. For care, you will need the same products with which you washed the windows.

With a damp sponge or dampened lint-free rags wipe the mesh cloth and frame, cleaning them from dirt. Experts advise washing the mosquito net a couple of times during the summer season. It is not forbidden to remove the mesh and rinse it with a shower, if it is more convenient for you.

For the winter period most often they dismantle the mosquito net and store it indoors, so maintenance is not required.

Timely care of windows guarantees you that they will last for several decades without causing trouble.

Adjustment of plastic windows

In addition to cleaning and lubricating the mechanisms, the hardware needs to be adjusted to create an optimal seal for reduced street noise and better sound insulation. Experts recommend adjusting windows twice a year: in late autumn (October-November) before the onset of winter and in spring.In time, it will take only 10-15 minutes, but it will protect the window from breakage for a long time.

Why is it needed do? With temperature changes, the profile changes its physical properties. In hot weather, when heated in the sun, the profile expands and friction of the sash can occur from this. In winter, the profile narrows, there is a weakening of the density of pressing it to the sash, the seal begins to let cold air through. Due to the compression of the plastic, the handle may lock and the profile may crack at the most stressed point.

Seasonal adjustment of the sashes consists in switching the mechanisms to winter and summer modes by changing the position of the clamp (there are usually three clamps on the sash - one on the side and two in the central part) and adjusting the degree of pressing the sashes to the profile.

Before the onset of cold weather, the clamps of the valves are tightened. Due to this, the sash is tightly pressed against the profile when closing, ensuring tightness and preventing blowing. In summer, to reduce the wear of the mechanisms, the clamps must be returned to their previous position and the force of pressing the sash to the profile should be weakened.

In addition to seasonal, adjustment is made as needed. For example, if the fittings are loose and you need to tighten the fasteners for the handles. To do this, lift the decorative bar under the handle by turning it to a horizontal position. Next, the fixing screws that attach the handle to the frame must be tightened.

If the sash sank and began to cling to the profile, metal latches or cold air began to pass through it, you can set the sash in the desired position (lower it or raise it) using a hex key that is vertically inserted into the adjusting mechanism with a previously removed protective lining. The sash rises when the key is turned clockwise and falls when the hexagon is turned in the opposite direction.

To adjust the sash on the sides (left-right), the hex key is inserted horizontally. The sash moves to the left if you turn it clockwise, and goes to the right if you turn it counterclockwise.

From all this it is obvious: in order for plastic windows to serve for a long time, proper care for them is a necessary and mandatory procedure. Every window company, positioning itself as worthy of attention and respect, is now engaged in the maintenance of its products and adjustment through the warranty service department.

In addition, there are now quite a lot of small companies that are engaged in the maintenance of plastic windows, offering care for fittings and seals, replacement of handles and seals, cosmetic repairs, ranging from eliminating scratches and damage, simple adjustment of fittings to replacing double-glazed windows.

The cost of services in such firms, of course, is different (depending on the number of windows, the degree of wear and other factors). For example, the cost of adjusting one sash window ranges from 500 to 1200 rubles. If we consider a two-room apartment with three window openings, adjustment from 3 to 9 shutters will be required.Even based on the minimum price (500 rubles), at least 1,500 rubles will be required for adjusting the sash and the minimum number of sashes.

Of course, it's cheaper to do it yourself. But it is advisable if the work is done professionally.

Do-it-yourself adjustment of plastic windows

Quite often, companies that install plastic windows carry out their warranty post-service. But if the warranty is over or it was not at all, all the necessary procedures can be carried out independently.

To properly adjust the plastic window, you need to know where all the moving parts of the mechanism are.

Switching to winter/summer mode

In order to have a comfortable temperature regime in your home at any time of the year, plastic windows need to be prepared for the transition to the winter and summer seasons. Not all PVC profiles can be switched to another mode. This possibility is indicated by the special shape of the pins (eccentrics), which are located on the side of the sash. If you can insert a regular screwdriver or a star-shaped screwdriver into them, grab it with a hex wrench, or the part has the shape of an oval, then such fittings will allow you to switch the window to another mode.

To switch to winter mode you need:

• find all pins (they can be located above, below and from the side of the sash);
• arm yourself with a tool, depending on the shape of the fittings - the already mentioned star-shaped or ordinary screwdriver, hex wrench, pliers;
• all trunnions are alternately scrolled 90 degrees to a special mark on them.

To check if the process was completed successfully, take a sheet of paper, press it with a flap and try to remove it. If it comes out with difficulty or even breaks, congratulations - you have switched the windows to winter mode.Such a test should be carried out in different places of the window - above, below, on the side near the handle.

How to transfer plastic windows to winter mode - video

The main problems and methods for fixing them with your own hands

In almost all plastic windows, the position of the sashes can be adjusted in three planes. This allows you to give them the correct position in the frame and to achieve the desired level of pressing the seals over the entire area.

Despite the difference in the shapes of plastic windows, their general design is the same.

The sash touches the frame

If the sash touches the frame from the bottom edge, you should:

• open the sash;
• using a hex wrench, turn the adjusting screw at the end of the sash near the top hinge, making several turns clockwise;
• close the sash;
• remove the cap from the bottom loop;
• insert the same key into it and wrap it clockwise several times;
• check if the sash moves freely, if necessary, adjust again until the window opens normally.

Depending on the type of malfunction, different elements of the window mechanism can be used.

If the sash touches the frame from the side:

• in case of touching the frame only from below, scroll the adjusting screw located under the lower loop;
• if the lateral part of the sash touches the frame along the entire length, the sash is taken away towards the upper hinge (Scheme 3).

Blowing from under the seal

Before you solve this problem, you need to find out why it started to blow from under the seal. There can be two reasons: an elementary cold outside, as well as drying out of rubber and loss of elasticity for this reason. In the first case, you can cope on your own. To do this, simply switch the windows to winter mode. If this does not help, then the inflation is caused by the second reason.And then you have to turn to professionals to replace the seal.

There are different options for adjusting plastic windows

If the handle is loose

In this case, everything is solved by a simple adjustment, for which the plate at the base of the handle is turned horizontally, revealing hidden screws. And just the latter are twisted tighter, usually this is enough to fix the handle.

PVC profile care

There are various tips: how and with what it is best to wash plastic windows and PVC profiles in particular. However, the most traditional means - a soap solution - in most cases is suitable for removing household dust and street dirt.

The smooth surface of the plastic profile does not have microcracks and relief (unlike wooden windows), so a soft cloth, rag or sponge (housewives make their work 50% easier thanks to the use of rags, which include microfiber), moistened with soapy water perfectly washes off all dirt.

How to deal with ingrained dirt or, for example, mounting foam that has fallen on a PVC profile?

To wash the plastic profile from dirt left by a marker or other dyes, we recommend using a melamine sponge soaked in water and wrung out. The sponge does an excellent job of removing surface dirt.

To wash the profile from the remnants of mounting foam, you can use a special composition for cleaning from mounting foam or, after waiting until the foam dries, remove the dry foam with a hard, non-scratching object, such as a wooden spatula.

If there are unwashable marks on the profile that could not be erased with a melamine sponge, then you can use a professional stain remover (for example, COSMOFEN).The disadvantages of this cleaning agent should be indicated that its effect destroys the surface layer of PVC and at this place the profile in the future, without protection, will “attract” dirt more intensively than untreated areas.

How to wash plastic windows

Do not use scratching washcloths, as well as cleaners containing abrasive chips (such as Pemolux), acid, alkali, solvent or acetone. Their use destroys the surface structure of the PVC profile.

Profile care specifics

To wash a plastic window profile, it is best to arm yourself with an ordinary soft cloth and one of the special store products marked “suitable for plastic profiles”. Most of these funds are produced in the form of sprays, which greatly facilitates the task of applying them to the entire structure. Treated frames are wiped with a rag or napkin to remove dirt and give the surface a shine.

After the frames are put in order, you need to clean the inter-frame holes designed for ventilation and removal of excess moisture. Work is carried out with an open window sash. From the inter-frame space and the holes located below, debris and dust are removed with a vacuum cleaner, brushes or brushes. After the procedure, a solution of soapy water is poured inside for washing, which is then removed with a sponge.