How to remove fungus in the bathroom: the best folk and professional ways

A few tips for using the funds

When planning to use this or that remedy for black mold, it is necessary to take into account a number of features. First, it is impossible to remove this scourge by washing off with warm soapy water and manganese.Even if it is possible to eliminate black plaque, disputes will remain. Having received a new nutrient medium in the form of warm moisture and the components that make up the soap, their colonies will multiply even faster.

Two years is enough for black mold to destroy building structures. In favorable conditions, she will not stop at the bathroom, but will capture new territories.

Secondly, it is impossible to avoid the re-invasion of mold after removing it mechanically. At the same time, spores will remain and continue their reproduction.

Thirdly, high positive temperatures, like very low ones, are not able to destroy mold spores. Their presence will only stop growth. As soon as favorable conditions return, the mold will continue to grow.

Fourthly, the smallest cracks in the bathroom wall need to be repaired, and it is better to insulate the walls that are in contact with the street. The floor mats in this room should be dry, and it is even better to make a warm floor here.

Fifth, it is advisable not to dry wet laundry in the bathroom. It will become an additional source of moisture. When zonal surface treatment does not help, you will have to make repairs throughout the room. For this purpose, buy products intended for use during repairs. Add them to putty, paint or whitewash.

The process of renovating a bathroom is labor-intensive, it requires both time and finances. But it is almost impossible to deal with old mold in another way.

Pay attention to the primers, which are based on acids, other components that are detrimental to mold.

What is mold?

Mold is a fairly noticeable plaque that mold fungi form.They are literally ubiquitous, growing on almost all materials and in any climatic conditions. The fungus appears not only on the surface of objects or walls, but also penetrates inside surfaces with microscopic threads, so it is not always easy to remove mold.

Most often, mold in the house can be divided into several types:

• Green. Often it affects food products, settling and infecting food.
• White. Can be found in flower pots, on wooden furniture, bread.

• Blue. Affects window frames, doors, parquet floors or furniture.
• Black. The most dangerous type of fungus that appears everywhere: tiles in the bathroom, wallpaper in the room, walls, ceiling.

Where to look for mold and what to do

If there is an odor mold, but with a cursory examination it is not visible, it is worth walking with a flashlight through the favorite places where colonies appear.

• Dark corners near the floor, under the bathroom, behind hanging cabinets.
• Switches and sockets. Especially relevant after the flood, arranged by neighbors from above, pipe breaks in ceilings.
• ventilation ducts. Idle urban ventilation becomes a hotbed of infection.
• Suspended ceilings. They keep water from leaking from the upper apartments. The owners may not even know that there is water above their heads, and meanwhile the mold successfully multiplies in the darkness of the interceiling space.
• Places behind iron and steel pipes. The metal accumulates condensate, constantly "wet" the wall, becomes a source of mold.
• After the discovery of the aggressor, they begin to destroy it. For this you need to prepare.
• Buy protective gauze mask. It will cover the respiratory tract from mold spores during cleaning. Throw away the mask after work.
• Buy rubber gloves.After cleaning the mold center, it is also better to get rid of them.
• Choose a means and method for the destruction of mold.

Chemicals should not be used by people with allergic reactions to household chemicals and in the acute period of respiratory diseases. For serious respiratory problems, it is better to use folk remedies.

Chemical and traditional means mold in the bathroom room differ in purpose, scope, impact power.

Causes of mold on walls

Of course, before starting a fight with such a very dangerous "enemy", you should find out why mold appears in order to nullify the possibility of such a disgusting deviation in the future.

In this regard, the initial action in the fight against parasites is to ensure normal and constant air exchange in the room. To do this, they resort to cleaning all ventilation ducts, installing special supply valves, as well as installing modern heating systems and adjusting plastic windows in winter.

The occurrence of fungus can also occur due to the strong cooling of building envelopes, which must also be taken into account in advance, before work is performed. For this, in the vast majority of cases, walls, floors and foundations are insulated through the use of heat insulators.

Among the indirect causes of mold formation, roof leaks, errors in construction operations, deterioration of the tightness of sewer and water supply systems are also distinguished.

Important points of the process

Immediately make a reservation that you should not get rid of visible signs of damage, but directly from the source of the problem.The visible part is dark spotting, and the focus is the mycelium (the latter just needs to be removed). Look for the hearth not on the surface, because it often hides deeper, in a more humid and less lit place - in various voids, under the finishing material.

To remove a layer of mold mycelium, use a regular scraper - scrape off the affected areas with it.

Spatula-scraper

Also clean the seams between the tiles if they are affected, and remove all grout.

Removing grout from tile joints

If the tile is about to fall off, it means that a hotbed is also hidden in it - remove it, and process the exposed surfaces.

How to remove bathroom tiles

All further actions must be carried out in a dry room. For this reason, arm yourself with a building hair dryer (they are convenient to heat the cleaned areas) or, in the absence of one, with a conventional household heater.

General appearance of a building hair dryer with its names of individual parts

After drying everything, proceed to the fight against the fungus with the help of special means (about them a little later)

It is very important to comply with safety requirements, so use protective equipment when working.

protective equipment

Dose the selected drug in accordance with the manufacturer's instructions (or one of those presented in this article).

The last step of the work is the reheating of the room.

Professional methods for the destruction of the fungus

For this, concentrated preparations are used, which are highly effective in combating mold and other pathogenic particles. For comparison, if you use folk remedies, you will need to apply the substance many times. Professional methods allow you to destroy the fungus in 1-2 approaches.Such preparations are produced in the form of concentrated liquids. With their help, a solution is prepared or the substance is applied undiluted.

Sanitation and ionization of the room

The purpose of the measures is the destruction of mold. To do this, use ionized air, it is supplied under high pressure towards the affected surfaces. The advantage of this method is the absence of an unpleasant odor. The product is non-toxic, after treatment it is not necessary to wash off the substance.

Prevention

Do not forget that dryness is the main enemy of mold.

• Do not close the door to the bathroom completely so that the room is constantly ventilated.
• Check the ventilation ducts in the bathroom as often as possible to ensure that air is vented.
• The installed heated towel rail will perfectly cope with the high humidity in the bathroom.
• For prevention, periodically treat the seams in the bathroom with vinegar or wipe with whiteness.
• If possible, take care in advance that mold does not appear in the bathroom. To do this, be sure to pre-treat the walls with special anti-mold products during the repair. At a minimum, purchase an antifungal primer.

If none of the ways to remove mold and fungus in the bathroom suits you, contact the sanitary and epidemiological station. Specialists will determine the type of fungus and take the necessary measures.

—

Copying this article is prohibited!

Folk recipes

Those who do not want to use household chemicals, but prefer to use the proven methods of "grandma", can get antiseptics such as:

• Biel;
• chlorine bleach;
• hydrogen peroxide;
• copper sulfate;
• baking soda;
• technical alcohol;
• tea tree oil.

The most common rules:

• The usual bleaching powder is poured into a spray of water, maintaining a ratio of 50 to 50. The resulting solution is treated daily with the affected areas of the wall until the form disappears. Then repeat spraying for prevention at least once a month.
• To get rid of dirt and mold in the bathroom, a solution based on ordinary sodium is also used. Black spots should be poured, if they are on a vertical wall, they are pre-moistened with water. After the soda has been corrected, the place of change is sprinkled with a kind of table vinegar. If they need to process white seams, it is better to choose a colorless option. Sodium foam is formed after the interaction of this liquid component. When it falls, it must be removed and the surface wiped dry.
• Copper sulfate is used to treat large areas affected by mold. Dilute in water in proportion: 100 g of dry ingredient per 10 liters of liquid.
• Tea tree oil will eliminate the fungus and give the bathroom a pleasant aroma. To prepare the desired solution in 400 g of water, add 2 teaspoons of essential oil. Then pour the resulting solution into a container with a spray and treat the affected areas with it. This tool cannot immediately eliminate the form, since it contains active ingredients, the effect of which only manifests itself over time, so the procedure with it should be repeated at regular intervals.

All these recipes for making mushrooms in the bathroom are simple and safe, so any housewife can use them.

Effective folk remedies

Not everyone uses chemicals.Some people are allergic to these drugs, others simply do not recognize them, so folk methods are still quite popular.

Common Methods

All of the following tools are often used separately, but for greater effectiveness they can be combined.

Vinegar and soda. Apply a thick layer of baking soda to the affected areas and pour vinegar over them. When the foam has settled, clean the surfaces with warm soapy water.

Remedies for fungus: baking soda and vinegar

Tea tree oil. Dissolve 2 teaspoons of oil in 500 ml of warm water. Pour the finished solution into a spray bottle. Treat surfaces. It is not necessary to wash off the product after treatment.

Tea tree oil

Hydrogen peroxide combined with boric acid. Mix acid, vinegar, peroxide and water (required ratio is 1:2:2:4). Apply the resulting solution to the affected areas.

Hydrogen peroxide against mold

Bura

Dilute borax in water (1 cup per 2.5 liters), apply the resulting product after cleaning the surfaces. You can not wash it off, but be sure to wipe the treated areas with paper.

Borax against mold in the bathroom

camphor balls

Effective only in the initial stages of fungal infection. Spread the balls around the room at the first signs of fungus.

camphor balls

Creosote

Creosote will help get rid of serious foci of fungus development. Dissolve the creosote in alcohol and treat the desired areas. Remove residues, as they are hazardous to health. Tellingly, creosote can only be used on brick and concrete surfaces.

How to remove mold from tiles

If mold appears on the tiles in the bathroom, it will be necessary to treat the walls with a special tool.Cleaning such a surface on the walls is much easier than removing a colony of microorganisms from sealants or a rubber surface. It will be easy to remove pathogenic microflora, but the main goal is to kill spores that can remain in the grooves and crevices between tiles or tiles.

So what to do in a similar situation and how to deal with such a problem? It will not be enough just to clean the surface and use a detergent.

One of the popular ways to help remove pathogenic microflora is to use vinegar and baking soda or whiteness. Soda will need to be slightly diluted with water, and vinegar is simply poured into a container, and applied with a brush to the tile or the joints between it. After that, you need to wipe with a rag or sponge in the place where the liquid was to completely remove the solution. To consolidate the result, you can re-walk over these places with a sponge, which will be treated with the same tool.

The eliminated liquid will not allow maintaining a favorable moist environment, and the active substance will remain for a long time.

Thus, it is possible to remove mold not only in the bathroom, but also in other rooms. The advantages of using soda and vinegar include the fact that they have a low level of toxicity, and their use poses practically no threat to the human body.

Mold Remedies in the Bathroom

Since the problem appeared a long time ago, chemists have found ways to deal with the dangerous phenomenon. In hardware stores, you can pick up substances with which black plaque is removed forever.

Instagram @vodopad_santehnika

On sale there are both special solutions designed for sanitizing infected areas, as well as general-purpose household products.

Special

Bactericidal drugs in the fight against microorganisms are powerless. They act on bacteria, not fungi. Therefore, antifungal and antimicrobial agents are chosen to clean the bathroom. According to the composition of the base, they are water and oil. Some drugs are designed to destroy the mycelium, while others - to create a film on the surface that prevents its occurrence and development.

You need to choose the right tool, taking into account the base material that will be processed

Since antiseptics contain potent substances, it is important to follow the rules for their application. If it is a concentrate, then you need to dilute it in the indicated proportions.

When working, ensure your own safety: use rubber gloves, goggles and respirators.

1. Focusing on customer reviews of hardware stores, we have compiled a rating of the most popular antiseptics: Stop Mold from the Olimp company (Russia). It is applied practically to any coverings. Does not contain chlorine, therefore it is safe for health.
2. Universal antiseptic Dali. Producer - Rogneda company (Russia). An aqueous solution removes all types of mold and fungus on any materials.
3. FUNGI CLEAN from the Russian company PROSEPT. Perfectly cleans tiles and seams, plastic, stone, wallpaper and other materials. Fast-acting—results are noticeable in 10 minutes.
4. Anti-mold from the company Quelyd (France). The composition of the product includes a synthetic resin, due to which a film is formed on the surface that prevents the growth of the mycelium.
5. Fongifluid Alpa from Alpa (France-Russia). It is used both for disinfection of premises and for prevention.The drug not only eliminates microorganisms, but also returns the base material to its original form.

Folk

In the absence of factory preparations, you can use recipes tested by the people. So, how to wash the mold.

• Copper vitriol. Gardeners are well acquainted with this inexpensive and effective substance. The infected area is sprayed with an aqueous solution, previously treated with a soap mixture. The surface dries, after which the procedure is repeated as necessary 2-3 times.
• Chlorine. Household substances based on it are effective in the fight against mycelium. They contain an aggressive component that destroys most fungi. "Domestos", "Sanita" or "Whiteness" not only wash the fabric, but also clean problem areas. The infected area should be washed with a sponge with an undiluted agent.
• Vinegar. Table 6-9% solution is an excellent antiseptic. With a sponge or cloth dipped in undiluted vinegar, wipe the problem area, leave to dry completely. Then rinse the surface with water and ventilate the room well.
• Bura. The natural mineral has good antiseptic properties. Use a mixture of 1 cup borax and 2.5 liters of water to clean the moldy area. After complete drying, remove the protruding crystals with a dry cloth. If the affected area is large, you can spray it with a solution of 1 cup of borax and 4 liters of water.
• Soda. Safe and natural antiseptic diluted in the proportion of 1 teaspoon per glass of water. This mixture can be used to clean the source of infection with a sponge or spray. Rinsing off the baking soda is optional.
• Hydrogen peroxide. An inexpensive and non-toxic liquid that can be found in a pharmacy. When processing colored surfaces, bleaching of the base is possible.
• Ammonia.Well suited for processing dense hard surfaces (glass, ceramic tiles). It is diluted in a ratio of 1: 1 and applied to the wall with a spray gun or sponge. After a few hours, it can be washed off with water. Not suitable for porous materials (wood, concrete, drywall).

Instagram @nataliya_shevlyagina

Copper sulfate is an excellent remedy for fungus. You will have to get rid of infected wallpaper or tiles and treat all surfaces

The main ways to deal with black mold at home

After making sure that the fungus is present, you should immediately begin to eliminate it. At home, you can deal with black plaque in different ways. We offer you to get acquainted with the main methods so that you can choose the most suitable one.

mold must be dealt with properly

Necessary security measures

Before proceeding with the elimination of black mold, you should take care of your safety, for this you need:

1. Prepare gloves, respirator and goggles to provide adequate respiratory protection and exposed surfaces during handling.
2. Cover clean areas with polyethylene to prevent contact with fungal spores.
3. Free the room as much as possible from furniture and other interior items.
4. Close windows and turn off the fan.
5. Refuse to use a vacuum cleaner, as in this case the spores of the fungus will be inside the device.
6. Dry the air in the room as much as possible. It is advisable to use a special device for this purpose.

The use of PPE is mandatory when fighting mold

Folk remedies - an affordable solution

Here are some tips to help you deal with dangerous mold:

• Hydrogen peroxide. The composition is applied to surfaces affected by mold. Cannot be used to clean colored substrates.
• Soda and vinegar. To prepare a solution in 5 liters of water, add 200 g of soda and 100 g of vinegar. The composition is applied to areas damaged by mold. Most often used for prevention.
• Ammonia. Work must be performed in a respirator. Before applying the composition, the surface is moistened, ammonia is applied and left for half an hour. Then the composition is thoroughly washed off. At the time of processing, windows and doors in the room must be closed. After cleaning the base, the room is ventilated for 2-3 hours;
• Tea tree oil. A solution is used for processing. To prepare it, water and oil are mixed in a ratio of 1 to 50, and then the finished solution is applied to the fungus. After 3-4 hours, the room is ventilated.

Hydrogen peroxide has a limited use

Chemical and antifungal compounds - an effective option

For a more effective fight against the fungus, chemical compounds are used.

These include:

• copper sulfate. The powder is diluted in water in a ratio of 1 to 10. The finished composition is applied to the area affected by mold with a brush and left for several hours. After that, it is thoroughly washed off. At the time of processing, there should be no people and pets in the room.
• Buru. First, the substance is diluted in a glass, and then added to a ten-liter bucket. The agent is applied to the surface for 10 minutes, and then washed off.
• Bleaches containing chlorine. Helps fight fungus. They are applied for preventive purposes. The composition is applied to a rag, and then the area affected by mold is wiped, achieving complete removal of plaque. After treatment, the bleach is thoroughly washed off.
• Professional formulations designed to combat the fungus. METAS-BIO, NANO-FIX, Dali and a number of others are in demand.

NANO-FIX Medic
NANO-FIX Medic

professional equipment

Given that fungus spores die under the influence of high temperature and low humidity, microwave drying is used to combat mold. With its help, you can process the base of any kind. It is incapable of harming human or animal health. Cleaning the surface from mold begins without any preliminary preparation of the base. Microwave drying is characterized by high productivity, and therefore requires a minimum of processing time.

help fight mold

How to prevent fungus

It is worth noting that in any room there are mold spores, but they begin to spread only if there is a favorable environment - humidity is more than 28% and temperatures are above 19 degrees.

Measures to combat such a problem primarily involve the elimination of humidity, because in a dry room, even in the presence of high temperature, the pathogenic flora is not active.

Preventive measures include the following:

Ensure adequate ventilation. So, in any multi-storey buildings, as a rule, there is a special ventilation duct. Over time, it becomes clogged and stops performing its functions, so cleaning is required. If desired, you can install a fan or air conditioning. However, even taking into account good ventilation, you should regularly ventilate the bathroom (especially after water procedures, washing).

Ventilation needs to be checked periodically.

It is necessary to wipe the pipes from the collected condensate in a timely manner

That is why many people prefer to install plastic pipes instead of metal ones, because they are resistant to leakage and are less likely to be covered with fumes.

Attention should also be paid to containers where brushes, various creams, powders and other hygiene products are stored. If wet jars and bottles are placed in the container, then water accumulates in them, which can also cause the formation of fungi.

It is not recommended to dry clothes in the bathroom, because this is what causes the rapid growth of fungi on the walls.

During repairs, it is necessary to use specialized plaster components that repel moisture.

Antifungals

Today there is a huge range of antifungal agents, so it is quite difficult for an inexperienced consumer to navigate

It is important that the package contains a note that the product is used specifically for the destruction of the fungus, and not for its prevention, as well as a list of materials on which it can be used.

Name	Impact features	Usage
Atlas Mykos	Universal preparation in the form of a concentrate, fights all types of organic plaque, including mold, fungal colonies, algae, moss both indoors and outdoors	Surfaces are treated with a solution of the preparation (part of the agent is diluted in two parts of water)
Izohan Grzybostop	Fights all types of mold and mildew	Suitable for use on concrete, cement and lime-coated surfaces. You can treat them both after the appearance of mold, and as a preventive measure. In the second case, a layer of the drug must be applied to the material, after which it can be painted or finished in another way.
PS 50	Chlorine-based product, effective against moulds, moss and other organic deposits	The drug is optimal for use on concrete, drywall, plaster, wood. Apply by brush or roller, starts working in 15 minutes
hydrocom	A drug that penetrates deep into the material and destroys pathogenic microorganisms	In most cases, it is used on lime surfaces, cement concrete, sandstone, shell rock and other porous materials.
Snowball	Acrylic resin in water dispersion	Destroys fungi, prevents their occurrence in the future, suitable for surface treatment before finishing
Fungicide	Concentrate that eliminates any deposits of organic origin	Can be used to apply to finished surfaces, add to paint, adhesive or primer. Not applicable when working with wood
Boramon	Aqueous concentrate with boron content, effective in the fight against mold fungi	It is mainly used to protect wooden surfaces from the growth of fungi, it works especially well on spruce and pine.
Renogal	The tool fights yeast and mold fungi, algae and all kinds of bacteria. Can be applied to surfaces already affected by organic plaque or used as a preventive measure	Surfaces are treated with a brush or spray, left to dry. If the area affected by the fungus is extensive, the treatment should be repeated. No need to rinse off

bath antifungal agent

It is quite difficult to talk about which of the means is more effective, therefore, a decision should be made based on the characteristics of the material, the area of ​​\u200b\u200bdistribution of the fungus and its type.

Elimination methods in the bathroom and shower

There are several methods for dealing with mold that has arisen on sealant. One of the keys to successful bathroom fungus control is identifying the source of the problem and fixing it.

And after cleaning from pathogenic flora, it is important to carry out preventive treatment of waterproofing in order to prevent the growth of pathogenic microorganisms in the future.

Cleaning the sealant from mold involves systematic surface treatment. To ensure that the components used for cleaning do not damage the shower curtain and mat, it is recommended to remove them during the cleaning period.

This precaution is associated with the whitening effect that most of the products used give. All work should be done in household rubber gloves that protect hands from contact with aggressive chemicals.

The use of a respirator will prevent pathogenic flora from entering the respiratory tract. For hard-to-reach places, it is better, and more convenient, to use small brushes rather than sponges.

All work should be done in household rubber gloves that protect hands from contact with aggressive chemicals. The use of a respirator will prevent pathogenic flora from entering the respiratory tract. For the treatment of hard-to-reach places, it is better, and more convenient, to use small brushes, rather than sponges.

Cleaning powder and whiteness: a successful combination

Even an ordinary cleaning powder preparation will help to cope with the removal of the fungus from the sealant.

To compile the funds you will need:

• cleaning powder;
• white;
• sponge;
• water.

Order of conduct:

1. Prepare warm water.
2. Dilute a small amount of powder in it.
3. Using a sponge, carry out high-quality treatment of the affected areas.
4. Wash off the composition with water.
5. Apply undiluted white to the sealant.
6. Withstand 15 minutes.
7. Rub with a sponge the places that were in work.
8. Wash off with water.
9. Dry the sealant.

The final result will directly depend on the efficiency and quality of processing. If mold remains in some places after the work has been done, the cleaning will need to be repeated.

When using products with chlorine, the color of the sealant and areas around it may change.

Combination of baking soda and vinegar

To eliminate mold, as one option, you can make a foamy cleaner based on baking soda and vinegar. For 1 liter of water, you need to take 1/10 pack of soda and 20 grams of table vinegar.

The prepared mixture is safe and effective enough. In addition to sealant, tiles and other surfaces can be treated with this composition. Such disinfection disinfects the surface, fights mold and cleans dirt.

Vinegar, boric acid and hydrogen peroxide

If a large area of ​​the sealant is affected by mold, a mixture based on several active ingredients can be used.

This will require:

• 4 parts water;
• 2 parts of hydrogen peroxide and the same amount of table vinegar;
• 1 part boric acid.

Cleaning process:

1. Mix all ingredients in a bowl.
2. Warm up the liquid to 50º.
3. Moisten the affected areas with a sponge.
4. Withstand 30 minutes.
5. Wash off with water.

How to clean with hydrogen peroxide?

To eliminate fungal colonies in small areas, you can use ordinary pharmacy hydrogen peroxide.

Cleaning the sealant from mold is carried out in a very simple way - wipe it with a napkin or sponge moistened with an undiluted substance.

Borax - an affordable folk remedy

The safe for health folk methods of combating mold on sealant include borax treatment. This is one of the safest bathroom cleaning methods.

To prepare the composition, take 10 parts of water for one part of borax. Using a sponge, apply the cleaning compound and leave it on the surface for 30 minutes.

After that, the sealant is washed with water and wiped dry. Mortar treatment is one of the simplest solutions.

ammonium chloride

Ammonia for cleaning surfaces can be used not only as part of mixtures, but also as a mono-tool. To do this, the active component is diluted in equal proportions with water, and applied to the mold-affected sealant.

Keep the solution on the surface for 60 minutes. After this period, the sealant is washed with water and dried.

tea tree essential oil

How else can you remove mold in the bathroom with sealant? Tea tree oil is used in cosmetology and medicine. Another use is to remove mold from sealant and other surfaces.

For effective treatment, you will need a 10 ml bottle of tea tree oil and half a liter of water. Such a composition is safe, they can process sealant, tiles, pipes, etc.

It is convenient that after processing such a tool can not be washed off. The disadvantage of the application is the high price of natural essential oil.

We remove the fungus in the bathroom correctly

If a fungus is found, all required measures should be taken to prevent its reappearance. Therefore, follow the instructions below.

Step 1. Remove the foci of the spread of the fungus.Clean them, dry them, and then cover them with special products (more on them later).

Step 2: Improve ventilation efficiency. First check the ventilation shaft for clogging. Clean it if necessary. If everything is in order there, but the fungus still wound up, then the existing ventilation is not enough and you need to add a fan.

How to check ventilation

Step 3. Remove all old nightstands from the bathroom, as they have probably also been subjected to fungal infection.

Step 4. Carefully inspect the washing machine, because, as noted earlier, it is an ideal place for the development of fungus.

Step 5 Inspect the pipes. If a lot of condensation accumulates on their surface, then they are most likely not sufficiently insulated.

Condensation on the pipes in the bathroom

Pipe insulation as a method of dealing with condensate

If the pipes are metal, then it is better to install plastic ones instead (there will be no condensation on the latter).

Piping in the bathroom

Step 6. Bring all plumbing fixtures to life. Water must not drip from the faucet or shower.

Step 7. Put a quality heated towel rail and, if possible, a "warm floor". The fact is that the temperature in the bathroom should be at least 2-3 ° C higher than in other rooms - in such conditions, moisture will quickly evaporate.

Step 8. Insulate the outer wall of the bathroom, if any.

Step 9. Refinish the entire room.

Step 10 Purchase and install dehumidifiers in the room. If you can't do that, then at least fill a few small containers with salt and put them in different places.

Dehumidifiers

However, the most important step is still the actual removal of the fungus.If this procedure is not carried out carefully enough, then additional measures will not give any result.