An easy way to drill into the ceiling without dust

Simple Tricks

You can drill a hole in a wall made of concrete, brick or gypsum or in a floor slab using a drill with a drill bit or a perforator. To reduce the chance of fines spreading around the room, take the advice of professionals and learn how to drill without dust in a wall or ceiling:

• Use a vacuum cleaner while working. In this case, you will need an assistant.While one person is drilling into the surface, a second person holds the hose, without a nozzle, in close proximity to the drill. With the help of a vacuum cleaner, it is possible to collect flying dust, but this option is only suitable for making shallow holes, provided that a partner is available;
• Glue a paper bag to collect dust. When drilling vertically, take a regular envelope (you can use it) or fold a sheet of A4 paper like a pocket, then attach the paper dust bag to the wall with masking tape;
• Put a plastic cup on the drill. The method is only suitable for making deep holes (from 5 to 12 cm) of large diameter in the surfaces. Take a plastic or paper cup, make a hole in the bottom with a knife and put it on the drill. If necessary, cut the glass so that the heel of the drill remains inside. This technology is most commonly used to drill dust-free holes on the ceiling.

Tired of cleaning up dust and dirt after every drilled hole in the apartment? Thanks to our "life hacks" you will be able to drill holes without dust and debris!

In this article, we will offer several options to help you drill a dust-free hole.

It might seem like a simple device, but it really works. The bottom line is simple, while drilling with a drill, directly next to the hole you need to keep the vacuum cleaner hose turned on (it is better to remove the nozzle

).

As a result, all the soap and debris from the hole will be sucked into the vacuum cleaner without polluting your apartment.

If you have a repair, and you need to drill a lot of holes, you can buy a special dust collector for a drill, or make it yourself from improvised means.

Drilling with a rotary hammer without dust or how to work with a rotary hammer without dust

When drilling a hole in concrete or brick with a hammer drill, a lot of dust is generated. When construction processes are underway, this does not bother anyone. If you need to drill a hole in a residential, clean room, this becomes a problem. Dust, especially brick dust, will ruin wallpaper, upholstered furniture and other interior elements.

In the article we will discuss how to work with a dust-free puncher. Or how to neutralize it at work.

Drilling holes with a perforator without dust.

Disadvantages when using a vacuum cleaner

Some use a vacuum cleaner. This is a good option to avoid dust when drilling with a hammer drill, but not always acceptable. This unit may not be available. It takes two people to operate it. One drills a hole with a hammer drill, the other holds the suction tube of the vacuum cleaner next to the working part of the drill. All dust is sucked into the vacuum cleaner. But one cannot cope in this situation. It is inconvenient for one person to monitor two working devices at the same time, holding their parts in the right places.

How to drill a wall without dust

To drill a wall with a dust-free puncher, you will need two things: adhesive tape and a plastic bag, which are used for packaging.

It is preferable to use masking tape. We mark future holes on the wall in the right places. Glue the opened plastic bag under the mark on the wall with adhesive tape. It must be held in such a way that the dust from drilling is all poured into it. You can carefully drill, the main thing is not to “gas”. Then the waste is poured into a bag.

It is worth adding revolutions at the perforator, as part of the dust will spread around the air flow from the engine fan. If you beat carefully, at low speeds, then the process will go just fine. You will collect all the dust in a plastic bag.It can be used repeatedly.

An important point: the adhesive tape must be glued to the wall very tightly. Not sticking tightly will lead to the fact that dust will fall between the wall and the adhesive tape and stain the wallpaper.

How to drill a dust-free ceiling with a perforator

Here the situation is more complicated. You can apply the same construction as described in the previous paragraph. But the effect of it will be worse. As an option, we use a disposable plate, or a disposable plastic container, pierced in the middle with a drill. If you do not add much speed, then most of the dust when drilling the ceiling will fall into this additional element. During operation, this plastic part will need to be held by hand to avoid its rotation.

Drilling with a perforator without dust ceiling.

The best option in this case would still be a vacuum cleaner.

In general, decide how to work with a dust-free hammer according to the situation.

Why fight dust?

Dust is undesirable for many reasons:

• Once in the body, dust causes health problems.
• Particles of cement or brick flour, getting into the gears of mechanisms, can disable them.
• When mixed with water, cement dust forms a dirt that is difficult to wash off.

However, all these measures only reduce the damage. Fundamentally solve the problem allow devices that collect dust even when it is formed.

Professional builders have in their arsenal a special tool for dealing with the resulting flour: a nozzle for a drill or a drill, to which a hose from a vacuum cleaner is connected. This addition to the puncher helps to collect debris very cleanly, but it has a number of disadvantages:

• You have to spend money to buy a nozzle. Such expenses are appropriate if you have to drill constantly.But if occasionally you have to drill one or two holes in the ceiling or wall, it is not rational to buy a special nozzle.
• As a rule, the use of the nozzle requires the help of a partner who will hold the vacuum cleaner. In everyday life, improvised do-it-yourself devices are used to solve the same problems.

My Reader's Experience

Tip 1

Half mask respirators are complete rubbish. Sprinkling water does not clean the air of fine - the most dangerous and most volatile dust. If there is a partner and the opportunity - to reduce the FORMATION of dust, try splashing on the grinder disk in the place where it enters the cut groove. Since pneumoconiosis is incurable, use RPE that is more effective than half masks (in order of effectiveness): full-face masks with P3 filters (BUT so that the size matches your face), and they are also with forced supply of clean or filtered air under the mask (to unfiltered air did not leak through the gaps between the mask and the face - the main problem of RPE). The second option is more expensive, to put it mildly. The compromise is to work intermittently tightening the headband attachment straps (to hold the full face mask tight to the face). In industry, ventilation is used, but this is unlikely to suit you. Although drilling into the ceiling with a vacuum cleaner in one hand and a drill in the other is quite possible.

Tip 2

There was an experience. The apartment is residential. Repair only in the kitchen. He carried sockets, ditched the walls (concrete), just with such a diamond disk as you have in the video, concrete with stones. Purpose: to protect the apartment from dust, it is clear that there is dust in the kitchen itself.

Option 1.Hang on the door 2 sheets of dense polyethylene with a large vertical overlap of the leaves, with the ability to connect them with Velcro or zippers. This option was prompted by the system of a mobile chemical laboratory. Polyethylene - so that the dust rolls down. Dense - to walk, so as not to tear. Velcro - to protect the passage and the gap in the middle. around the perimeter of the door glue the jamb with adhesive tape. The hands did not reach the Velcro (there was no one to sew), and since the polyethylene is dense, the gaps still remained. Refused this option.

Option-2: The idea is the same, but instead of polyethylene, I used 2 wet sheets, the adhesive tape around the perimeter of the door fell off by itself, it was replaced by carnations and buttons. The overlap on the walls along the perimeter is 20-30 cm, in the middle of the passage it is also about 30 cm. Before dusty work, I removed it, soaked it abundantly, sprayed it with a spray bottle for flowers as it dried. At the bottom, along the width of the door, I laid a wooden beam, pressed the sheets, provided an interference fit, and thereby plugged the bottom gap. The main thing is that there is no draft in the apartment, all windows must be closed. At the end of the work (when the dust is a pillar, and you are in the same place) it is harmful to breathe all this goodness. I tried to spray the air to knock off the dust, but the effect is weak + dirt appears. In addition, he opened a window in the kitchen, put a blowing fan against it and went through the “wet barrier” into another room, waiting for the dust to settle. Result: dust from the kitchen into the corridor leaked and settled on the floor at a distance of about 3 meters (natural air convection in the apartment helped this), but there was no further obvious dust. Daily cleaning of the corridor in the evening saved my wife from the disgruntled look.Of course, and necessarily, any repair requires cleaning throughout the apartment, dust appears always and everywhere. I hope my experience will be useful to someone.

So, today we learned what construction dust is, where it comes from, and in what cases it happens the most. How to protect the respiratory organs from it, how to work, protecting your furniture and other valuable accessories from it in the house.

How to drill without dust: options, the better

Construction work is always accompanied by dust and debris, but using some recommendations and tips, it can be significantly reduced:

• the puncher leaves a little dust during operation so that it does not scatter around the room at the same time use a construction vacuum cleaner. Some brands of tool have a built-in vacuum cleaner, which makes the task easier;
• using a drill, it is best to either make a jig at the end or a bag, or make an envelope under the hole so that debris falls into it.

How to drill holes in a brick wall: the choice of tools and nozzles

To make a hole in a brick wall, a puncher with a drill or an impact drill is suitable, most often the latter is used. Its power should be at least 600 watts, the minimum number of revolutions should be from 2500 per minute. It is best to use a drill with smooth power adjustment and quick clamping function.

Using the hammer drilling function, the drill becomes identical to a hammer drill. Increased speed and ease of operation. To make a hole in a brick wall, you need to use the punch method of a dynamic nature. Without this, the drill will not be able to catch on the inside of the brick.

How to drill a load-bearing wall in a panel house with a puncher

In most panel houses, the walls are made of concrete, to make a hole with a perforator, you need to use drills.

In addition to them, you can use special crowns. They have soldering around the circumference. Applying them, you need to turn off the percussion function of the perforator.

Specialists use diamond drilling, this requires powerful equipment and skills.

How to drill reinforced concrete under a pipe with an impact drill

Using an impact drill for reinforced concrete, you need to use the "perforator" mode and the drill bits. First, the hole is made smaller, then larger. The drill needs to be cooled down periodically.

Important! When working with concrete, you must not get into the reinforcement, otherwise the drill will break. With the help of a special device, you can check where it is located

How to make a hole in a concrete wall with a drill

It is difficult to drill a concrete wall with a conventional drill. It is necessary to install victorious drills and select low speeds. A dowel is inserted in the right place to help the tool break through the surface. Further, drilling must be alternated with blows on the dowel.

If the drill does not have speed control, then it will not be possible to make a hole.

How to make a hole in a concrete wall in an apartment with a drill

For a small hole, you can use a punch. It will make, most conveniently, from a drill, diameter 8 mm. The end is sharpened sharply. The drill is placed in the right place, rotated, while hitting it with a hammer. Periodically moisten the drill so that it works longer.

Work rules: tips

When working with tools, you must follow the safety rules and general recommendations:

• 1) When performing work, protect your respiratory organs, dust is harmful.
• 2) If you work outside, then you need to put up fences of 2.5 meters.
• 3) When working at a height of more than 1.5 meters, use a strong base - scaffolding or a goat.
• 4) When working with a tool, the speed must be turned on smoothly, and in no case should it be turned off when it is in the body of the wall.
• 5) When drilling through plaster, it is necessary to carefully study the communication plan so as not to hurt anything.
• 6) It is strictly forbidden to drill through the decorative coating.
• 7) Choose the right drill for each surface.
• Moisten the drill with water so that it does not overheat.

We drill dust-free holes in the ceiling and walls.

Before this topic “Drill (drill) without dust”, I told you how to cut without dust using a grinder. This process was described in the article - Mounting a strobe without dust *. Well, today I was asked to tell you how to do this only when working with a drill or a hammer drill. So go ahead for new knowledge and solutions, as methods will be presented that will allow you to drill and drill so that the dust from the drill does not fly around the room and, as a result, you do not have to clean it up for a long time and tediously! + We will tell you how to make it so that when drilling the ceiling (with a drill, crown), concrete or gypsum chips do not fall on your face !! Go…

All builders face the challenge of drilling, drilling holes in ceilings and walls. When in the eyes, on the floor and pieces of furniture, as well as hands, a puncher or drill pours small, and even large fractions of drilling waste, simply dust particles.

So, I'm offering to deal with this little nuisance using the old-fashioned method, by putting on a drill, a drill, an ordinary plastic or cardboard cup !!

Just slide a drill through the center of the cup, the cup looks completely in the direction of drilling and at the time of drilling, crumbling dust, particles of the concrete fraction, will fall into the plastic cup, which will greatly simplify the further cleaning of the apartment and protect your eyes from dust. At least you should have glasses for this. Well, if anything, it won’t get into your mouth !! :))

This method of drilling, dust-free drilling, is suitable for drills or drills with a length of at least 10 centimeters, including the heel of the drill! Otherwise, the selected container will need to be shortened in length.

You can also drill the wall without dust, only in this case a vacuum cleaner or a glued bag on the wall will help us in the place where you are going to make a hole.

At the moment when you are drilling the wall, your partner or yourself will have to substitute the vacuum cleaner under the hole. the vacuum cleaner will suck up all the dust coming out from under the drill and will not allow it to scatter or crumble. So we figured out how to drill a hole in the ceiling and wall without dust with a drill and a puncher.

Without resorting to the use of special drills with nozzles that draw in air, the Americans do an excellent job.

They are when drilling a wall or the ceiling is not used like we are a plastic cup or a vacuum cleaner, but a specially designed bag into which, when drilling, all the fine fraction gets into.

This container is put on a drill and when the drill rotates, by analogy, the grooves in the package are worked out. The photo below shows this very well.

How to make a paper dust bag

How to drill dust-free concrete with a dust collector

1. Cut out a blank from paper (see photo). You don't need to freeze anything. Everything is done by eye, sometimes by trial and error.

2.Cut off a few strips of tape and stick one end of it to the edge of the table.

3. Take a drill, insert the drill into the chuck and wrap the paper around the chuck so that you get a funnel. The bottom of the funnel should be below the cartridge so that it remains stationary when it rotates. Glue the edges of the paper with tape.

4. Tape the funnel to the body of the drill. It is easier to do this by using not one long strip of tape, but several short ones. Glue strips of adhesive tape to overlap, so that there are no gaps through which dust could spill out.

Such a simple device will help you collect some of the dust when drilling holes in the ceiling.

Now let's look at a more advanced way: drilling concrete with a hammer drill equipped with a vacuum dust collector.

It is clear that such a solution will cost more than a paper funnel, but the result will be completely different. With such a tool, you can, without fear of dust, drill holes not only in the ceiling, but also in the walls and in the floor.

Recently, I needed to make only one hole with a puncher in the wall for a dowel-nail.

I immediately remembered all the simple ways not to litter at the same time:

using a paper envelope attached to the wall with tape, and using a disposable cup.

These methods are time-tested, but I wanted to come up with an even more convenient way. I accidentally came up with the idea to use a dishwashing sponge.

It has a number of advantages: it is affordable, reusable, retains dust well when wet, and serves as a kind of filter.

What is the best drilling

As already mentioned, there are several ways to drill a concrete wall, we will consider each of them in more detail.

perforator

When using a hammer drill or impact drill, they must be switched to impact mode, a working tool with a victorious tip is inserted and it must be directed perpendicular to the wall surface.

If drilling holes is carried out for a long time, then periodically it is necessary to moisten the drill so that it does not overheat much.

After you have drilled to the required depth, you need to pull the working tool back without turning off the punch. To clean the finished hole from dust, it is necessary to deepen and pull out the drill several times.

Standard drill or screwdriver

If you do not have the tools described above, then you can do this work with a conventional electric drill or a powerful screwdriver.

To perform drilling, you will need more time than using a hammer drill, but you can do everything yourself.

In this case, in addition to a drill and a drill, you will also need a punch. First, a small indentation is made at the drilling site with a punch and a hammer.

After that, insert a working tool into it and start drilling. If the drill has stopped, break the hard sections again with a punch and continue to work.

Although a conventional electric drill or screwdriver is not suitable for working with concrete, but if you do not have a hammer drill, then you can make several small holes with these tools, but you must use a lance-shaped drill with a carbide tip, it is usually used for tiles.

Diamond drilling

This is the most effective method by which you can simply and quickly make a hole of the required diameter in a concrete wall.

To perform these works, you will need special equipment, consisting of the following elements:

1. electric motor;
2. a stand that is securely fixed to the base;
3. drill bit.

During operation, it is not necessary to cool the drill, as water is supplied to it, which not only cools the tool, but also prevents dust from forming.

If specialists work, then together with the specified equipment they use a vacuum cleaner, with which they remove dust and water.

Since the price of such equipment is very high, it is not advisable to buy it for domestic use. If necessary, make a hole of a large diameter, for this you can always invite specialists.

Industrial dust protection

Vacuum dust collector

This device is of two types:

• Mounted on a wall or ceiling - under the influence of suction force, it reliably “sticks” to any surfaces, even textured ones, and stays there for the entire time the vacuum cleaner is turned on. It has a hole in the middle through which a drill or crown passes (by the way, the diameter of the hole can be different, but 6–7 cm is usually enough for domestic needs).
• With fastening on a drill or a drill - initially it is placed as close as possible to the drill head, as it is drilled, it shifts towards the body. The disadvantage of such dust collectors is that debris can still fall on the floor, albeit in small quantities. However, one cannot fail to mention their advantage - such devices can be used even if you have to drill a wall in hard-to-reach places.

By itself, such a dust collector will be a useless toy. A prerequisite for its operation is the presence of a powerful vacuum cleaner connected to a special pipe. Once or twice you can drill using the same vacuum cleaner that is used to clean the apartment, but for regular use it is worth getting a "Rocket", "Whirlwind" or "Buran". The fact is that fine dust seeps through the filter system and settles in the engine. Modern specimens do not withstand for a long time and burn out, but the old Soviet monsters are almost unkillable.

Self-adhesive bags

They have a number of advantages:

• They are relatively cheap, so they are ideal for those who take up a puncher only occasionally.
• Doesn't take up space in your toolbox.
• Transparent, so do not interfere with the review.
• Completely eliminate the ingress of dust on the floor.
• There are options for both a regular drill and a crown.
• Despite the fact that they are considered disposable, after the first use they retain their adhesive properties and can be reused (you just need to pour out the garbage accumulated inside).

The only disadvantage of such packages is that they are completely unsuitable for drilling the ceiling and other horizontal surfaces.

Drill attachment

It looks like a cone that is put on a drill. At first, it is straightened to its full length (the wide end rests against the wall, and the narrow end against the body of the drill), but as the drill moves deeper into the wall, it folds like an accordion. When using a drill with a long shank, you have to press the nozzle against the wall with your hand, which can be inconvenient.

Crazy hand method

Although the old invention offered for review has lost its relevance, in some extreme situations it can come in handy even today when you need to drill a hole without using a drill, which is simply not at hand. The authors of the program Crazy Hands offer to make an old instrument out of new materials.

By the way, in another article, read about the device, thanks to which you can improve your work with a drill.

What do we need to create a hand drill?

- ballpoint pen with edges; - drill; - jar lid - weighting agents (nuts or other); - wooden plank; - rope.

Required tool

The need to drill load-bearing concrete walls occurs regularly (for example, when repairing or installing electrical wiring, plumbing or furniture, such as shelves or air conditioning), but this is not easy - such walls are much stronger.

A hammer drill is best for working with concrete. It is quite powerful and has a crushing function that breaks especially strong pieces of the wall. The kit includes a set of drills of different diameters.

In some cases, a simple drill can be used to drill a hole in concrete. It should be used if:

1. Need to make some holes.
2. The depth of the hole does not exceed 1.5 cm.
3. Foam concrete is to be drilled - when using a perforator, it crumbles.

In other words, a drill can be used if the amount of work is small and the holes themselves are small. But experts note that the use of a conventional drill will make drilling time-consuming. Not any drill is suitable - it must have an impact mode and victorious nozzles.

Drill modes - drilling, drilling + impact, puncher

You can also purchase a hammer drill - a more expensive, but more powerful model.

The list of what to drill a concrete wall with includes a screwdriver. But the model must be powerful enough and have strong nozzles, and the concrete must be light.