How to hide a geyser in the kitchen: the best ways to disguise + safety requirements

Safety precautions for installation and operation

For the safety of the kitchen in Khrushchev with a column, you must follow the rules for installing and operating the device.

Before use:

1. Look for flammable objects near the burner.
2. Make sure no gas is leaking.
3. Check if the burners are working. They shouldn't smoke. If it is present, that use is prohibited.
4. The color of the flame should be blue. If you see yellow or red shades, then you need to call the master to clean the surface around the burner.
5. In case of malfunctions and defects in the device, it is disconnected from the network. Even when the speakers are off, smoking and the use of lighters is prohibited.
6. If you find a leak, call the wizard and open the windows. Trying to fix it yourself is not allowed.

Before installation:

1. Make sure the rooms are well ventilated. Usually installation takes place in kitchens or bathrooms, because there are hoods there.
2. Do not cut off the air supply to the water heater.
3. Do not place the device near flammable objects. If your kitchen has a gas stove, then the water heater is not placed above it, so as not to provoke a fire.
4. Do not lay the device with bricks, plasterboard, tiles. This will interfere with the inspection of the operability of the device, carrying out repair work. In addition, in the event of a malfunction, it will not be possible to quickly detect them, shut off the gas and call the masters, which can lead to disastrous consequences.

Some believe that Soviet instruments could explode. This will not happen if you follow it, do not violate safety precautions and periodically call specialists for inspection.

Still people are afraid of gas leakage. AT modern devices install additional ignition burner. It does not allow gas to go into the room until a fire, sparks. When the fire is turned off, the valve shuts off the gas. If the fire goes out on its own for unknown reasons, the valve will also work.

Arrangement of the working area

To create the most comfortable, cozy and functional kitchen interior with a gas water heater on a scarce area, experienced designers have prepared a lot of ideas.The photo below is proof that even small kitchens with a column can be made cozy and stylish.

This problem can be solved with the help of multi-level or retractable countertops, which will be equipped with a furniture set. You can also apply another trick: make the window sill a continuation of the work area, use it for cooking, covering it with a countertop, as is done in the next photo. Instead of a standard stove, choose a hob, and replace the oven with a microwave with an air grill.

Say goodbye to a large-scale sink in favor of a compact, deep model. Nowhere to put the dishes so that water flows from it? It is better to use a special dryer for this purpose, mounted in a hanging cabinet. But the work surface space will be more spacious.

Design decision

Depending on what style of interior is chosen for the design of the room, the wall-mounted unit will stand out or, conversely, hide.

White kitchen interior with gas boiler on the wall

Open box for a gas boiler in the kitchen

Classic style

The classic style requires the absence of any household appliances, so the wall-mounted arrangement of equipment can significantly spoil the interior. In order not to disturb the harmony of the classics, the unit must be hidden from view. The most common and easiest way is to place it behind the facade of the kitchen set. But here you need to follow some safety rules:

• Provide free access to the boiler;
• Create free air circulation for the correct operation of the unit.

The gas boiler fits perfectly into the interior of the kitchen

To do this, you need to equip the set with an easy-to-open door, and create an indentation of the boiler surface from the walls of the cabinet at least 3 cm. For fire safety, the inside of the cabinet can be lined with foil. This will protect the walls from possible overheating and fire.

A gas boiler is practically no different from kitchen cabinets

So that the box hiding the gas equipment does not stand out among the others, the wall cabinets of the kitchen set must be ordered according to the size of the unit. Therefore, it is necessary to plan a classic design after its installation.

Wall cabinets are matched to the size of the gas boiler

Gas boiler in the kitchen, decorated in a classic style

rural style

The simplicity and unpretentiousness of rural types of interior design will require some ingenuity from you when decorating a gas boiler. In order not to violate the overall style of the room, the unit can be:

• Hidden behind a decorative cabinet door. To create good air exchange, such a door can be latticed, which will emphasize the overall stylistic direction.
• Decorated with a textile curtain with a matching print. This method can be very successful if the fabric on the facade of the headset, windows, sofa cushions will be in harmony.

Gas boiler in a rustic kitchen

If such options are not acceptable, then you can mask the boiler with a drywall box. It is not difficult to build such a structure, even a non-professional will cope with this task. At the end of the work, the outer surfaces of the box are covered with paint or wallpaper to match the walls.

Rustic style kitchen with gas boiler fitted in a separate alcove

Kitchen design with a gas boiler to match the color of the furniture

A simpler acceptable option for rural styles is simply painting the unit to match the color of the walls, which will make it less noticeable and discreet.

The gas boiler can be hidden behind one of the cabinets

The attic loft style can be emphasized in an original way with the help of a special design of a wall-mounted kitchen unit. The bulky configuration of the old boiler will come in handy and give individuality to the interior. For greater expressiveness, it is painted with bright matte paint, contrasting with the main tone of the walls. The loft style can also be highlighted with the help of ultra-modern equipment with a metal surface. All household appliances in this style are open to the eye, therefore, when choosing a boiler, you need to take care of the harmonious combination of all units in your kitchen.

The modern model of the gas boiler fits in the kitchen in the loft style

Since all loft-style communications remain open, gas pipes do not require special decoration. A photo of a kitchen design with a gas boiler on the wall in a trendy loft style will show how open gas communications can fit into the interior.

A gas boiler with a stylish laconic design fits perfectly into the interior of a modern kitchen

High tech

When equipping a kitchen in a high-tech hi-tech style, you need to think about purchasing an ultra-modern unit with bright backlighting. The style of such a room welcomes the variety of highly intelligent kitchen equipment, so decorations are not required here. If it is impossible to purchase the latest heating technology, designers advise covering the boiler with metallic paint.

The gas boiler fits perfectly in the high-tech kitchen

Any interior solution requires a thoughtful approach.So that the wall-mounted geyser is not a hindrance, but becomes a decoration of your kitchen, you need to take care of the harmony of household appliances and the general style of the room in advance.

Ways to increase free space

Small kitchen design Khrushchev with a geyser, first of all, should pursue the goal of increasing the narrow space without losing its functional purpose. That is, the repair should bring space here without thereby creating any inconvenience.

Here are proven ways to help visually expand the Khrushchev kitchen with a column and make it more comfortable:

• refuse standard floor cabinets with heavy facades and large handles, do not choose a standard, straight-shaped headset, preferring modular options with glass or glossy doors. Such furniture does not look bulky, and glossy surfaces reflect light, expanding the space;
• if the door opens into the kitchen, dismantle it by making an opening in the form of an arch. This will save precious space;
• use the niche space under the windowsill to store dishes or install compact appliances. If such an opportunity arises, take the refrigerator out of the kitchen or pick up a compact model of such a unit;
• choose only light translucent window textiles or replace the standard tulle with Roman blinds;
• when choosing a color for decorating a small kitchen with a gas water heater, it should be noted that for such a space, experienced designers recommend using light natural tones on the walls. This technique fills the room with light, visually making it more spacious.It is worth abandoning large drawings on furniture and walls, they will only visually narrow the kitchen.

There are also ways to expand the space of the Khrushchev kitchen through installation or dismantling. The ideal option would be a redevelopment.

Method	Advantages	Flaws
Connecting the kitchen to the living room	The kitchen room acquires a fairly significant amount of additional space	You will need to purchase a good hood so that cooking odors do not penetrate into the living room
Joining the balcony area	The kitchen becomes more spacious and brighter due to the dismantling of the walls	The walls of the balcony will need to be additionally insulated, which will entail material costs
Removing the wall of the bathroom in depth	The option is acceptable if a balcony does not adjoin the kitchen	Bathroom space will be smaller

Installation of frame structures

Quite an original way to hide the gas pipe. The installation procedure is a separate issue. But if you understand the meaning, then drawing up a drawing and choosing the appropriate materials is not a problem.

Box

Tip - since the design is of a closed type, it is necessary to consider the procedure for accessing the gas pipe along its entire length in the kitchen. The box should be fastened so that it can be easily dismantled at any time. You will also have to install a hatch in the place where the gas valve is located. The best option to hide the pipe is a box made of moisture-resistant GKL with a metal profile frame.

Kitchen furniture.

If a major overhaul is planned, with an update not only of the interior, but also of the furnishings, it is advisable to order kitchen furniture, taking into account that it should hide the gas main. This is one of the best solutions. The advantage is that the pipe and valve will always be freely available. Now many companies specialize in this area, so the only problem is to find a really conscientious performer.

Tip - basically, when repairing, the owners try to do the maximum amount of work with their own hands. In many cases, this is entirely justified. But only not in relation to kitchen furniture.

• Firstly, the alteration of existing samples will require not only professional experience (“ditching” is easy - it is difficult to restore), but also special tools and accessories. Given their cost, the savings will be lower than expected. Another disadvantage is that you will have to spend a lot of time on independent work, and this is without confidence in an excellent result.
• Secondly, your kitchen (how it looks after the repair) can be clearly seen on the PC screen. The specialists of the executing company will not only show its graphic image, but also help to correct, correct, and finalize individual issues. And all this - before the start of repair, and not after. Consequently, the error will be excluded, and then you won’t have to lament that “this is what I didn’t take into account (foreseen)”.

What to consider
Any design should not close the pipe tightly. The possibility of a gas leak cannot be ruled out. What is fraught with its accumulation in a limited space, no comments are required. Moreover, the specific smell in the kitchen will not be immediately felt.

roof rails

A good way to hide any pipe, not just gas. Especially for kitchens with small dimensions. What are the rails, you can see in the photo.

This is the common name for suspended structures - shelves, hooks - which are fixed on the wall along the visible section of the gas main.

Attention! Nothing can be hung on the pipe itself. It is prohibited to use it as a support. Some articles indicate that it is not allowed only to overload

Not! The gas pipe should not be an element of any structure, except for the main one - this is one of the safety rules

Some articles indicate that it is only not allowed to overload it. Not! The gas pipe should not be an element of any structure, except for the main one - this is one of the safety rules.

The use of roof rails largely solves the problem of placing various utensils in a small kitchen and significantly saves time - the hostess always has everything at hand. Installation of such devices will not cause any difficulties. Drilling a wall, hammering in dowels and screwing in fasteners - any man can handle this.

The article provides only a few examples of how you can hide a gas pipe in the kitchen. Whoever has a developed imagination will find other ways to solve this problem. Don't be afraid to experiment and you will succeed.

A few words about the refrigerator

The second Achilles heel of small kitchens in Khrushchev is the placement of a refrigerator. It is difficult to hide a large unit, as a rule, there is no place left for this device, and it goes into the corridor, to the place of the former pantry, or even to the room. But it is unlikely that the refrigerator can be called a decoration of the living room.

In a small kitchen, a compact model of a refrigerator will fit perfectly

Perhaps, as part of the reorganization of the kitchen, it is worth considering whether you really need a huge two-chamber household refrigerator? There is no shortage of food in stores, is it worth stocking frozen meat for six months in advance, maybe it’s better to buy chilled meat as needed?

In addition to refrigerators with a freezer, there are appliances on sale that have only a cooling chamber. They are much more compact - there is no need for a thick layer of thermal insulation and a large compressor. Such models are often designed for installation under the countertop.

There are also options for independent appliances: the freezer and refrigerator compartments are designed as independent separate appliances that can be more conveniently placed in the kitchen. Or even leave only the refrigerator in the kitchen, because it is used more often. And put the freezer in another room.

If you approach the interior design of a small-sized kitchen thoughtfully, then a small area is not a sentence. There is always an optimal solution for creating a comfortable living space.

Types of pipes and how to mask them in the kitchen

In many apartments, pipeline masking is provided for in the layout: the developer makes special strobes in the walls, in which plumbing communications of hot and cold water supply and heating systems are hidden.

Sewer pipes are usually hidden in the floor or in the wall during the construction or major renovation phase. The only type of pipes that cannot be closed tightly is a gas pipeline. For safety reasons, gas equipment must be provided with an unobstructed air supply.

If the pipe is walled up or the column is placed in a closed box, then in the event of a leak, the gas will accumulate in the closed space, and this situation may one day lead to an explosion. Therefore, according to existing requirements, it is strictly forbidden to close gas pipes with the help of boxes, to wall them up in walls.

There are several basic ways to close the pipes of cold and hot water supply, heating, ventilation, sewerage and gas pipelines.

Standard options - using frame structures based on metal profiles and drywall sheets (plywood, plastic, chipboard). In this case, the design will be perceived as part of the layout.

Another popular camouflage – with the help of hinged and floor furniture modules.

In any case, the use of any structures should not be contrary to safety requirements and be consistent with the gas service.

Each owner chooses his own way of masking pipelines, based on the possibilities, general style decisions and aesthetic preferences.

Construction of boxes

With the help of boxes, you can hide vertically and horizontally running engineering communications in the kitchen. This is a simple way that allows you to maintain the aesthetics of the design of the room.

With the help of various materials - drywall, plastic panels, MDF or chipboard - rectangular structures are mounted. They can protrude above the wall surface, be installed in existing niches and corners of the room, under the ceiling or along the floor, or combined with a furniture set.

It is quite simple to build a box: this requires metal perforated profiles, a screwdriver and self-tapping screws. With the help of profiles, a frame of appropriate dimensions is made. The profiles are securely connected with fasteners and fixed to the wall, ceiling and floor with self-tapping screws.

The width of the frame must be calculated in such a way that there is at least 10 cm free space on both sides of the pipe. When the frame is mounted, sheets of drywall, plastic or MDF are attached to it.

Disguise with furniture

Furniture elements - wall and floor cabinets - the easiest and most convenient way to hide utility pipes in the kitchen. In most apartments of compatriots, using a special cabinet under the sink, they mask the siphon and sewer drain.

By the same principle, you can hide other pipes: for this, the upper and lower modules of the kitchen set are used. Depending on the thickness and location of the pipes in the body of the wall cabinet, holes are cut or the bottom or top of the module is completely removed, leaving only the side walls and the facade (door).

Concealment with wall cabinets is a traditional way to hide the exhaust ventilation pipe and gas pipeline. To do this, the kitchen set is hung on the wall so that the shelves inside the cabinet are parallel to the pipe.

If necessary, you can cut holes in them according to the diameter and location of the gas pipeline or heating pipe, and if it is a thick corrugated exhaust ventilation pipe, you can completely remove the shelves and leave a free niche.

If you need to hide the pipes with a hanging furniture module, you can not use it as a support for hanging. A cabinet with a door should only be fixed to the wall or side modules.It should not be subjected to stress, especially if it is a gas pipeline.

Another camouflage option is with the help of a countertop connecting floor modules, a sink or a window sill. The countertop masks horizontally running pipes of a gas pipeline, sewerage or heating.

If possible, you can even replace the window sill with a single slab of natural or artificial stone (granite, marble) or chipboard 16-22 mm. Many designers use one design that goes from countertop to window sill.

Common mistakes

Beginners often make mistakes when decorating a gas pipeline, which result in fines from specialized services or the occurrence of emergencies:

• do not provide for an inspection hatch in the box that provides access to the gas valve and meter;
• change the location of pipelines without the permission of gas workers;
• after obtaining permission, they carry out the transfer of the riser with their own hands, without involving an organization that has a license for this type of activity. It will be practically impossible to legalize independent redevelopment in Gorgaz;
• used for the manufacture of drywall boxes of low moisture resistance.

Style selection

Before choosing a way to decorate a gas column, you need to decide on the style of kitchen design. If there is a desire to do nothing and leave everything as it is, it is better to give preference to the loft. This direction is implemented by exposing all engineering communications. The geyser, which is in full view of everyone, will come in handy here. You can show off everything: a gas meter, pipes, risers. They become the decoration of the room, their color and shape sets the tone for the overall design.

Geyser in the interior of the loft

If you like the rustic style, you can also not hide the equipment. It should be a little aged with the use of special paints. You can flaunt a geyser, and when the rustic or Provence style is used. Here you can safely experiment with artistic painting, with stickers and stickers. The main thing is to choose plots that are close to the theme of the chosen design direction. When implementing other styles, it is better to hide gas water heaters in cabinets.

An example of a successful implementation of the classics

The following photo shows an example of the implementation of minimalism in the interior of the kitchen.

Modern interpretation of minimalism

Video description

The video shows different ideas for arranging a kitchen in Khrushchev with a geyser:

Other Helpful Tips for Renovating a Small Kitchen

When drawing up a design project for repairing a kitchen with a geyser, it is imperative to take into account fire safety requirements, use ergonomics rules and think over the ventilation of the room. There are some useful tips that can help put all this into practice.

Modern geysers

First, at the stage of thinking through the future interior, it is important to decide where the described equipment will be located. Perhaps it makes sense to replace the column with a more modern model, more suitable for future furniture.

It is important to determine in advance where the device will stand, how to make a chimney and install ventilation.

Modern model in the interior of the kitchen

Secondly, regardless of whether the column is built into the headset or not, it is better to order furniture for equipping a small kitchen in a workshop and make it exactly the size of the existing room.This will allow you to organize an ergonomic storage system and use every centimeter of available usable space.

Custom made headset

Third - many people think that in the presence of a gas column it is impossible installing suspended ceilings in the kitchen. If the ceilings in the apartment are higher than 2.25 m, then you can

It is important to observe one condition. There must be a distance of at least 8 cm between the chimney opening and the stretch fabric film.

At the same time, it is better to make a chimney not from an aluminum corrugated pipe, but from a sandwich, which has an internal heat-insulating layer.

Geyser and stretch ceiling

Fourth, the wall on which the geyser weighs cannot be pasted over with wallpaper or sheathed with plastic panels. When exposed to heat radiated from operating equipment, this finish may melt or catch fire. It is best to choose plaster. It is allowed to hang the column on walls finished with ceramic tiles.

Fifth, for the safety of family members and for the correct operation of gas equipment, it is necessary that the kitchen has a constant supply of fresh air. Therefore, in the kitchen where the gas column is operated, it is necessary to install plastic windows with a supply ventilation valve.

Supply ventilation valve on plastic windows

Note! If the repair of a small kitchen is made from scratch, it is advisable to take care and install fresh air valves as an element separate from the window. They crash into the walls and look like the following photo.

If a supply and exhaust system is already installed in the room, it is worthwhile to invite a specialist home at the repair stage and instruct him to check their balanced work.If any deficiencies are found, immediately correct them and put the chimney in order.

Ventilation valves in the kitchen

Conclusion

If you have any unclear questions regarding the transfer of the geyser or its installation inside kitchen cabinets, you need to contact the gas services for clarification. Violations of existing fire safety rules give rise to risks that are incompatible with life. Their discovery will lead to heavy fines and lawsuits.

5 successful and safe solutions

1. Hide the geyser and pipes in the closet

You can hide communications, a column and a counter behind furniture. To do this, you need a cabinet or pencil case without a back wall.

The gas pipes are neatly hidden in the top cabinet. This method will be safer if the top and bottom of the furniture is open to allow ventilation.

It is bad that part of the cabinet will be used for other purposes (not as a place to store kitchen utensils). But this method is simple and safe - there will always be free access to gas equipment.

2. Plasterboard box

Purchase only fire-resistant options - GKLO sheets. The box is constructed from a metal frame sheathed with drywall.

The drywall box with pipes must be removable and ventilated.

By the way, in addition to drywall, you can use other non-combustible materials.

A box built in accordance with all safety rules is an excellent universal way to hide pipes, a meter and other gas equipment units at the repair stage and maintain stylistic unity.

A false wall is often constructed from drywall.Gas pipes cannot be completely wired into a blank wall. Such a construction will take away some area, which is undesirable for small kitchens. But for communications stretched all over the wall, sometimes this can be the best solution. It is possible to make such a design according to all the rules.

How to make a false wall competently and without the claims of gas services, see the video:

Customize your kitchen cabinet by choosing the right materials.

4. Decorate the pipes

The construction of the box is troublesome: it requires skills, the availability of tools. Everything can be done easier and faster. This will make it look no worse.

1. Painting.

Paint the pipe to match the walls, furniture, or backsplash.

The paint to match the headset stands out against the background of the apron, but it looks neat and does not spoil the overall look.

Bright colors in the work area will always distract attention. So, in the photo below, bright yellow did a good job and disguised the gas pipeline

Contrasting, well-chosen color combinations in the interior will turn a disadvantage into a feature. Bright pipes against a dark blue background look stylish and unusual.

1. Decorative painting.

Are you good at drawing? Then you can disguise the gas pipeline, not hiding it at all, but accentuating it.

1. Decoration with handy items.

Twine, ribbons and other things can become a material for decoration.

In fact, the choice of such tools is limited only by safety rules and your imagination.

Depending on the style of the room, you can decorate communications and make them part of the overall design with any other items, you can use various techniques, for example, decoupage.

5. Part of the railing system

Chrome pipes in the working area of ​​the kitchen are an ideal opportunity to hide communications.

The gas pipe can be hidden among the roof rails.

You can design pipes for roof rails by painting with chrome paint.

What to do is strictly prohibited

In accordance with current legislation, it is prohibited to independently install gas appliances without prior approval of the relevant project and work. Otherwise, the person will be held liable.

For residents of small apartments, the kitchen area of ​​which does not exceed 6 m², an exception is provided: they can hang a column above the sink.

It is not allowed to install such devices in conditions of high humidity. Also, do not equip next to plastic and synthetic products.

You can't force pull. The law prohibits the installation of gas installations on load-bearing structures. Do not use water hoses for connection. There are other types of installations for this purpose.

Be sure to have a high-quality, not clogged ventilation system with natural air flow.

Unusual disguise options

In some non-standard kitchens, there are strange options for gas wiring. In order to hide pipelines in such premises, special masking methods are also used.

For example, if the gas valve in the kitchen is installed at a height of 75 cm or even lower, then when installing kitchen furniture, it becomes inaccessible. There is a non-standard way out of this situation - to design a removable tabletop.

There is another solution to this problem, invented by craftsmen. It is enough to make a hole in the countertop exactly above the valve and fix a long handle in it, rigidly fixed at the bottom of the tap.In this case, only the upper part will protrude above the surface of the tabletop, which can be beautifully decorated. It is easy to turn off the gas with such a handle without disassembling or moving parts of the kitchen set. Moreover, this exotic method does not violate the requirements of regulatory documents regarding the safety of the operation of gas equipment.

Often, apartment owners are faced with the problem of a gas pipe in the kitchen during repairs, which runs along the entire wall in the “apron” area. You can’t hide such “ugliness” under the countertop, you can’t close it with a box or cabinets. But this situation can be dealt with with the help of rails. Such a hanging system for storing a lot of necessary little things will allow you to arrange different shelves and hooks with kitchen utensils in such a way that the gas pipe becomes, as it were, part of the structure. In fact, of course, nothing can be attached to it. You just need to carefully clean the pipe and paint it in a metallic color.

• When the style of your future kitchen is ultra-modern (hi-tech or techno), the pipes will not spoil, but decorate the interior, they will become its “highlight”. It is only necessary to place accents in an appropriate way, to highlight them in any way - to make them contrasting, shiny, bright.
• Making the room in an eco-style will allow you to turn a vertical gas riser into a trunk of a sprawling tree. Having decorated it with pieces of bark, adding the appropriate painting on the walls and furniture, you can “grow” a tender birch, a mighty oak or a pacifying pine right in the kitchen. For an oriental-style kitchen, exotic bamboo is suitable if you close the pipeline with a half of a bamboo stem bought at a hardware supermarket.

WATCH VIDEO

Objects with a diameter of more than 3-4 cm will give beauty to the original version - decoration with mosaics. The material is fragments of glass, ceramics or wood, beads, eggshells, stone and even pieces of fur. The main thing is to apply a layer of fixing substance to the surface, which is used as an adhesive composition or a special cement mortar. The technology of drawing up a pattern and its originality depends on the selected raw materials and the artist's imagination.

A little about security

Scheme of installation of a geyser.

Everyone understands that a geyser is a specific equipment, and you should not experiment with it. However, for the sake of beauty, some are willing to violate safety regulations. But in modern speakers this is already taken into account, they provide three-level protection. Namely:

• The 1st level of protection is provided by a sensor that turns off the gas in the absence of traction;
• Level 2 is controlled by a thermocouple, and if the pilot burner goes out, the gas supply immediately stops;
• Level 3 uses a hydraulic valve to protect the water heater from overheating.

Thanks to the developers for this, but even with such reliable units, you need to be careful and prudent, without putting yourself and loved ones in danger. Do not undertake to install or transfer the gas water heater yourself, but call licensed specialists for this. Do not try to hide it from the eyes away and do not close it if permission is not given

Do not try to hide it from the eyes away and do not close it if permission is not given

Do not undertake to install or transfer the gas water heater yourself, but call licensed specialists for this.Do not try to hide it from the eyes away and do not close it if permission is not given.

Embedding a column in a cabinet is prohibited by safety standards.

In the current cute kitchen design projects, there are options when it is enough to insert a gas water heater in line with the top row of furniture drawers. She looks there, even if not hidden, very aesthetically pleasing and harmonious, if all proportions are observed and the right color and complete set of kitchen furniture are chosen.

Pipes and hoses that extend from the geyser cause trouble, but they can be hidden using a decorative box or screen. They also come up with more original ways to cover and decorate the hoses, the main thing is that the whole structure can be easily removed when the turn comes for the annual preventive inspection of the column by the gas service.