How to remove handles from a gas stove: how the handle works and what to do when it is not removed

The cost of the work of specialists

Malfunctions occur suddenly and require quick elimination, especially when a gas stove breaks down. However, not all owners of household appliances have the necessary skills. When it is impossible to carry out repairs on your own, you have to call the master to the house. What expenses are expected by the owner:

• replacement or repair of a gas supply valve - from 300 to 1,200 rubles;
• nozzle cleaning - from 400 rubles;
• replacement of the lamp in the oven - from 400 rubles;
• gas adjustment - from 500 to 900 rubles;
• lubrication and cleaning of rods on the feed lever - 900 rubles;
• replacement of rods - 1200 rubles;
• change of thermocouple - 900 rubles;
• replacement of the ignition unit - 900 rubles;
• cleaning of the supply contacts - from 900 to 1,100 rubles;
• change of sealing gum - from 500 rubles;
• replacement or repair of a candle - 800 rubles.

Prices depend on the stove model and the region where household appliances are serviced and repaired.

Handle Removal Instructions

Since most modern stoves have removable power controls, they can be easily removed for cleaning. But, if this has not been done before, then rough oiling can create certain difficulties. Despite this, the cleaning operation is still worth doing.

It is important not to forget that the stove is a gas-using equipment, during the operation and maintenance of which it is important to comply with fire safety rules. Therefore, before starting work with the stove, it is necessary to turn off the gas supply, since any manipulations are considered flammable.

Stage # 1 - selection of necessary tools

To carry out the work, you need to prepare the following:

• gloves;
• gas key;
• pliers;
• screwdriver
• knife;
• rags;
• water and detergent.

According to safety requirements, work must be carried out with rubber gloves.

In some models of gas stoves, special mounts for handles are provided. You need to remove them carefully so as not to damage the thread and then return them to their place.

A gas wrench, pliers and a screwdriver will be needed to remove the gas stove handle, and a toothbrush and detergent will be needed to clean up clogged areas. It is worth remembering that different models of gas stoves have different methods for removing handles.

Stage # 2 - dismantling the handle of the gas stove

Work should be started after the gas supply valve is closed.

The gas stove knobs should be set to the off position. In order to remove one handle, you need to pull it towards you and slowly pull it out of the groove. This operation must be carried out very carefully so as not to damage the rotary mechanism.

If you cannot remove the handle manually, you can use pliers

Using a rag as a gasket between the handle and the work surface, with a part of the pliers, gently squeezing, pull towards you. In some types of plates, the handles are screwed on; a screwdriver must be used to unscrew them.

There are also options when you can remove the handle by prying off the mounting protective cap. Using a screwdriver or a knife to pry the handle, be very careful not to damage the surface of the plate

In some types of plates, the handles are screwed on; a screwdriver must be used to unscrew them. There are also options when you can remove the handle by prying off the mounting protective cap. Using a screwdriver or a knife to pry the handle, be very careful not to damage the surface of the plate.

There are models where the protective ring has grooves, and in order to get it, you just need to scroll the ring a little to the side.

Stage # 3 - cleaning removable elements

To clean the dismantled handles, you need to prepare a container with warm water and detergent, where to place all the removable mechanisms that need cleaning. Keep in the cleaning solution for at least 10 minutes, and in case of severe contamination, additionally change the water.

To clean the surface of the handles, do not use substances containing chlorine, as this can damage the enamel coating and erase the inscriptions on the handle.

Using a brush, carefully remove dirt from the areas of the stove where the handles were installed.

Pay special attention to notches, gaps and reliefs

It is worth noting that it is better to use a rag moistened with vegetable oil to process aluminum parts of the handles, and then remove the remaining oil with a detergent containing alcohol.

Also, in the process of cleaning the surface of the stove and hard-to-reach places under the handles, do not forget about the grate. It also requires timely maintenance.

For effective cleaning of gratings made of various materials, various methods and improvised means are used.

Stage # 4 - reverse installation of handles

Installation of handles is carried out after complete drying of all parts. It is necessary to correctly put all the rotary mechanisms in their original places. If the handle shaft is not fully inserted into the groove, then it will not work.

Handles of gas stoves are plastic and metal. They are equally heat-resistant, however, when removing and installing a plastic handle, the likelihood of damage to it is much higher.

Handle cleaning methods depending on the type

If the regulators come off easily, they can be soaked or boiled in a degreasing solution and the residue can be easily brushed off.

If the handles on your stove are not removable, do not be discouraged, and there is a way for this case, in this situation sticks with cotton wool, again a toothbrush that is no longer suitable for brushing your teeth, gauze swabs and toothpicks are quite suitable for us.

Cleaning of non-removable handles is carried out in the following sequence:

• we take a product that contains chlorine;
• we moisten a gauze swab in it and apply it to the handles (or spray it with a spray bottle);
• we wait a few minutes;
• further, we take a brush and clean it, in hard-to-reach places we go through with a cotton swab and a toothpick;
• after a sponge or cloth, we erase the remnants of contaminants.

Preparing to wash the stove

In fact, there is no difference whether it is a gas stove, induction or electric. There are handles on almost any cooking technique. Although modern models are increasingly being supplied with electronics and push-button controls. But let's focus on the handles. They can be removable or fixed. For most household stoves, they are removed.

Before you start cleaning, you must remove all rotary toggle switches. This will make the process much easier. It's okay if the switches cannot be removed, you can bring them back to their original form and in place.

Regardless of the method you choose, you may need: a foam sponge, an old toothbrush, a couple of wipes that absorb moisture well, gloves. The use of metal brushes for cleaning gas and other stoves is highly discouraged. But what can be truly useful is a melamine sponge.

Do-it-yourself gas stove cleaning

Not all housewives and owners of gas stoves know how to properly clean the stove with their own hands, as well as what is required for this. Folk remedies are suitable for those housewives who prefer not to buy household chemicals, but to use safe and proven methods over the years.

And besides, you can use household chemicals only with gloves, so as not to damage the skin of your hands.

In order not to damage the skin of the hands, it is best to clean the stove with gloves.

If you still prefer synthetic products, then it will not be superfluous to learn about alternatives and safe methods. Washing and cleaning mixture can be made at home from improvised means that are present in any home. As a rule, such mixtures wash dirt no worse than all popular household chemicals, and at the same time it is also safe.

To clean the gas stove and oven, you can apply:

• citric acid;
• Vinegar;
• Ammonia;
• Soap dissolved in hot water;
• Food soda.

Using these components, you can clean not only the stove, but also other kitchen appliances, such as a microwave oven, an electric kettle, a slow cooker, a juicer and other household appliances.

How to clean handles

To clean the regulators from grease and dirt, you can use various household chemicals. However, most housewives prefer to do this work with the help of effective improvised means. The easiest way to clean the handles is with soapy water. To do this, follow these steps:

1. Boiling water is poured into a deep container.
2. Finely grated laundry soap is dissolved in it. For every liter of liquid you need to take 2 tbsp. l. cleaning agent.
3. Pre-removed handles are placed in the prepared solution and left for 6-8 hours.
4. After the specified time, the dirt will get wet and it will be easy to remove it with a sponge.
5. Clean regulators are wiped with a dry cloth and returned to their workplace.

1. Pour 1 bottle of ammonia into a bowl.
2. To it is added the same amount of water (necessarily at room temperature).
3. The components of the cleaning agent are mixed.
4. A cotton pad is moistened in it.
5. They wipe the regulators removed from the gas appliance.
6. After 7 minutes, the products are cleaned with an old toothbrush.
7. The parts washed from dirt are wiped dry and installed in their original place.

Definition of breakage in models

Like all such household appliances, a gas stove eventually becomes unusable, parts wear out, and there is a need for repair. Furnaces of each manufacturer have their own list of common faults. Most often this concerns problems with burners, electric ignition, and the oven door.

Hansa

Common problems in the operation of Hans gas stoves:

• The burners go out as soon as the ignition knob is released. The reason is the sticking of fat or food residues on the nozzles, a burnt out thermocouple, damage to the magnetic valve, faulty electric ignition.
• Unstable fire on the splitter. The reason is a clogged jet or a skewed air damper that limits the air supply to the burner.
• No spark in electric ignition. Indicates a malfunction in the fuel control system or a worn spark plug.
• The oven door does not close well. The reason is the displacement of the mounting axis or mechanical damage to the door.
• Stuck gas valve.Most likely, the valve body is damaged, the oil has thickened or dried, the latch handle has slipped off the axial rods.
• The smell of butane near the switched off stove. It is necessary to check the connection of the gas pipe to the stove, the pipe itself for a gap, inspect the faucet.

Darina

Typical malfunctions of Darin gas stoves include:

• arbitrary operation of the automatic burner ignition system;
• constant flame during operation;
• turning or jamming of the adjusting knob;
• malfunction of the solenoid valve that turns off the gas supply when the fire goes out;
• the switched on stove forms the smell of fuel, smoke appeared, the flame is colored orange.

The most common breakdowns typical for Ardo plates:

Periodic shutdown of the gas burner or lack of ignition. Most likely, the reason is a violation of the insulation of the spark plug, the failure of the thermocouple, the solenoid valve, or due to food residue in the nozzle.

Self-extinguishing of the burner. The reason is a burnt thermocouple or the need to clean the nozzle, adjust the gas supply.

Difficult to adjust handles. Usually the problem is solved by flushing and cleaning the rotary mechanisms.

Problems with electric ignition

Pay attention to the contacts of the power buttons, they may need to be cleaned. They inspect the block responsible for supplying a spark, check the voltage in the network.

Insufficient combustion

The problem is caused by the need to clean the jet.

Smell of gas. To determine the cause, the masters are urgently called, they ventilate the room, having previously blocked the gas supply pipe.

Ariston

The most frequent breakdowns in Ariston gas stoves:

• The gas does not ignite. Breakdown of the gas supply valve, or electric ignition.
• Failures in the electronics.
• Uneven burner flame. Indicates that the gas supply is incorrectly configured.
• The burner does not ignite. Most likely the solenoid valve is not working.

Less common are malfunctions in the operation of the ignition module, the igniter, the capillary tube or thermostat is damaged over time, the burner channels are clogged.

Hephaestus

Common breakdowns of Gefest gas stoves:

• Uneven flame. It is eliminated by adjusting the supply of combustible substance.
• Self-extinguishing of the burner after ignition. The reason is a failed thermocouple.
• No flame. The reason is a malfunction in the Hephaestus electric ignition model or a gas supply valve.
• Malfunction of the electronic module (display, bulbs, temperature sensors).

Indesit

The following malfunctions are often found in Indesit gas stoves:

• The appearance of an unpleasant odor after turning on the burners. It is necessary to clean the burners from food residues.
• The power controls are hard to turn. The reason is the accumulation of dirt on the mechanism or the replacement of the decorative handle is required due to a malfunction of the tap attachment.
• Enhanced combustion. For bottled gas, adjustment of the reducer is required, for a centralized line, the reason is a malfunction with the nozzle.
• Low burning intensity. It is worth checking the pressure in the system, the condition of the hose, nozzles.
• The burner does not light up. If it is alone, most likely, cleaning of the divider, nozzle is required. If all the burners do not light up, the problem is in the electric ignition.
• The burner smokes during operation. Indicates high pressure in the system, dirty nozzles, deformation of the flame diffuser, poor gas quality.
• The oven light does not come on.Most likely, the light bulb burned out or the contacts were oxidized, they also check the serviceability of the outlet and the network cable.
• Smell of gas when the stove is off. Possible incorrect connection of the device to the line or depressurization of one of the elements or connections of the structure.

Housewife's advice: how to clean the handles at the stove (video)

We tried to talk about the most famous methods for cleaning handles on gas stoves. Of course, complex cleaning will not be needed if you spend a few minutes on the handles after each cooking process, but situations are different and perhaps our advice is exactly what you will need in the near future. Stock up on patience, detergents and start restoring beauty to your pet.

All gas stoves are equipped with removable handles.

The main thing here is not to rush, but to act carefully, slowly and without breaking the plastic.

Furnaces from different manufacturers certainly differ from each other. However, as experience shows, most design solutions from different manufacturers are VERY, VERY similar.

Shut off the gas supply with the shut-off valve before starting work.

Gas stove Hephaestus, Indesit, Electrolux, Darina (handles that need to be pressed and turned when ignited).

Just pull it towards you, along with the ring on which the symbols are drawn.

If you're having trouble, try treating with WD-40. Then, putting one knife into the gap between the ring and the handle itself, bend it a little. And from the opposite side, with the second knife, acting as a lever.

If it doesn’t go through the rag with pliers neatly.

Then soak the handles in water with the addition of fairies. After a while, the fat will turn white and come off with a toothbrush.

How to lubricate the swivel tight mechanisms of the crane?

Factory lubrication of the crane is designed for approximately five years. In Soviet times, gas workers used graphite grease (called NK-50), LG-Gaz41, LS-1P.

Graphite (crushed coal), which forms the basis of the lubricant, is able to fill in microscopic irregularities in parts, while reducing friction.

It has great refractoriness and does not dry out for a long time.

You can use grease or technical vaseline.

Tips for repairing gas stoves with your own hands

If there is a lot of fat: how to wash a gas stove

For the highest quality cleaning and cleaning of all contaminants, it is necessary to carry out preliminary preparation.

We sprinkle soda on a damp surface in an even layer and let it stand for 30-40 minutes. This method is not difficult and makes it possible to clean the stove and oven. The oven can also be cleaned in this way.

If there is too much fat, then it is better to apply a cleaning agent on it and leave it for a while, and therefore wipe it off

After waiting for time, you can start cleaning, water with baking soda must be removed from the surface of the stove with a soft sponge.

In no case should metal washcloths be used when cleaning the stove and oven, as they can harm the surface, but it is better to use a sponge and a toothbrush or cotton swabs, but this is in the most inaccessible places.

To wash the grate on the gas stove, you must use the soap solution written above. Citric acid or juice, vinegar will also be excellent aids. They can be applied in place or separately.Ammonia and vinegar can remove dried and burnt dirt on the surface of a gas stove.

All gas stoves are equipped with removable handles.

The main thing here is not to rush, but to act carefully, slowly and without breaking the plastic.

Furnaces from different manufacturers certainly differ from each other. However, as experience shows, most design solutions from different manufacturers are VERY, VERY similar.

Shut off the gas supply with the shut-off valve before starting work.

Gas stove Hephaestus, Indesit, Electrolux, Darina (handles that need to be pressed and turned when ignited).

Just pull it towards you, along with the ring on which the symbols are drawn.

If you're having trouble, try treating with WD-40. Then, putting one knife into the gap between the ring and the handle itself, bend it a little. And from the opposite side, with the second knife, acting as a lever.

If it doesn’t go through the rag with pliers neatly.

Then soak the handles in water with the addition of fairies. After a while, the fat will turn white and come off with a toothbrush.

How to lubricate the swivel tight mechanisms of the crane?

Factory lubrication of the crane is designed for approximately five years. In Soviet times, gas workers used graphite grease (called NK-50), LG-Gaz41, LS-1P.

Graphite (crushed coal), which forms the basis of the lubricant, is able to fill in microscopic irregularities in parts, while reducing friction.

It has great refractoriness and does not dry out for a long time.

You can use grease or technical vaseline.

Tips for repairing gas stoves with your own hands

What will we need?

The process of cleaning a flat horizontal or vertical surface, as a rule, does not cause difficulties, but removing dirt from stove handles that have a complex shape and relief is quite difficult.

Therefore, to flush out grease from the hardest to reach places and completely clean the regulators, prepare the following before starting work:

• cleaning agent;
• cotton buds, cotton pads, gauze;
• toothpicks;
• an old toothbrush;
• sponge and soft clean cloth.

Folk remedies

There are many grandmother's remedies that can be prepared at home from the most common materials. They are always found in almost every home.

Lemon juice

After processing in this way, a pleasant lemon aroma will remain in the kitchen. We work with the use of this representative of citrus crops in the following sequence:

1. We take one lemon, squeeze the juice out of it, then we take a toothbrush (which we will no longer use to brush our teeth) and, dipping as needed, clean our hands in a circular motion.
2. If after this pollution remains, we additionally take baking soda and alternately, dipping, then in juice, then in soda, we clean the remains.
3. Then rinse with a damp cloth or sponge and rub with a dry towel.

Vinegar will get rid of odor and remove dangerous bacteria

If the handles are removable, in a saucepan we bring a solution of equal proportions of water and vinegar, carefully remove the handles from the stove, lower them into the diluted liquid and put them on medium heat, bring to a boil and boil for 6-8 minutes. After we take it out, cool it and rub it with a towel until dry. We install in place.

If the handles are not removable, then in the spray bottle you need to dilute the composition with one part of vinegar plus one part of water, spray the handles abundantly, wait for a while, and then wipe them with a clean, dry towel or paper towel.

Laundry soap

For removable regulators, the following method is suitable:

• we take a basin or a large pan (the main thing is that everything fits there);
• we rub laundry soap on a coarse grater into our container, fill it with hot water (about 80 degrees);
• stir until the soap dissolves (dishwashing detergent, washing powder);
• gently lower our pens into the resulting solution, hold for 20-30 minutes (depending on the degree of contamination);
• further, after the expiration of time, we find an unnecessary toothbrush and diligently clean the regulators from all sides, rinse with water.

After this cleaning, the removable regulators will sparkle like new again.

This solution can also be used for non-removable handles. To do this, use the non-soft side of the sponge, having previously applied the solution to it, and rub the places of contamination well. And then remove the residue with a rag or paper towel.

Ammonia

This drug will help remove very strong and old contaminants if you work in the following sequence:

• dilute one part of water with one part of ammonia;
• dip a gauze swab and apply the product to the surface; we process hard-to-reach places with a cotton swab and a toothpick;
• wait a few seconds and wash off the remnants of contamination with a clean, damp cloth.

Features of cleaning stationary handles

Using tools on a plastic or wooden base will avoid scratching the work surface of the stove.

You can use the following methods for cleaning:

• Household chemicals. Depending on the type of cleaning agent chosen, it is necessary to act strictly according to the instructions indicated on the package.
• Laundry soap. You should rub the head of the toothbrush with a damp piece of laundry soap, then clean the handles until soapy foam is created. This method allows you to remove dirt and give the surface of the thermostats a great look.
• A solution of vinegar with water. Using this method, it is necessary to strictly observe the proportions: mix one part of vinegar with four parts of water. It is imperative to clean the handles with such a solution with gloves using cotton swabs. This solution removes not only dirt, but also old grease.
• Lemon juice or citric acid. Apply the concentrated solution to the surface and after 5 minutes remove with a clean cloth.

But regularly using the above methods, you can avoid global pollution of pens.

Handle Removal Instructions

Since most modern stoves have removable power controls, they can be easily removed for cleaning. But, if this has not been done before, then rough oiling can create certain difficulties. Despite this, the cleaning operation is still worth doing.

It is important not to forget that the stove is a gas-using equipment, during the operation and maintenance of which it is important to comply with fire safety rules. Therefore, before starting work with the stove, it is necessary to turn off the gas supply, since any manipulations are considered flammable.

Stage # 1 - selection of necessary tools

To carry out the work, you need to prepare the following:

• gloves;
• gas key;
• pliers;
• screwdriver
• knife;
• rags;
• water and detergent.

According to safety requirements, work must be carried out with rubber gloves.

A gas wrench, pliers and a screwdriver will be needed to remove the gas stove handle, and a toothbrush and detergent will be needed to clean up clogged areas. It is worth remembering that different models of gas stoves have different methods for removing handles.

If there is a lot of fat: how to wash a gas stove

For the highest quality cleaning and cleaning of all contaminants, it is necessary to carry out preliminary preparation.

We sprinkle soda on a damp surface in an even layer and let it stand for 30-40 minutes. This method is not difficult and makes it possible to clean the stove and oven. The oven can also be cleaned in this way.

If there is too much fat, then it is better to apply a cleaning agent on it and leave it for a while, and therefore wipe it off

After waiting for time, you can start cleaning, water with baking soda must be removed from the surface of the stove with a soft sponge.

In no case should metal washcloths be used when cleaning the stove and oven, as they can harm the surface, but it is better to use a sponge and a toothbrush or cotton swabs, but this is in the most inaccessible places.

To wash the grate on the gas stove, you must use the soap solution written above. Citric acid or juice, vinegar will also be excellent aids. They can be applied in place or separately. Ammonia and vinegar can remove dried and burnt dirt on the surface of a gas stove.

Cleaning and prevention

Any malfunction is better to prevent than to eliminate. Observing the operating conditions of the gas stove, extend its service life, avoiding unforeseen repairs. Preventive care and cleaning:

1. Clean the surface of the plate from food debris after each preparation of food, waiting for the plate to cool down.
2. Do not leave the switched on stove unattended, as the boiling liquid from the containers floods the flame of the burners, which leads to premature wear of the auto-ignition and gas control systems.
3. Do not forget to lubricate the rubbing surfaces of the adjusting knobs.
4. Cleaning of burners, jets, junctions of regulators and switches is carried out with a needle or thin wire, metal brushes and brushes are also suitable.
5. Perform periodic maintenance. To do this, the protective panel is dismantled, the studs are removed, the rods are pulled out, the parts are cleaned and inspected for mechanical damage and signs of wear. The mating and mating elements are lubricated with graphite grease.

Repairing a gas stove seems to be a difficult task. Armed with the necessary tools and troubleshooting instructions, you can repair household appliances yourself and save a significant amount of money.

How to remove the handles from the Hephaestus gas stove

Any Gefest gas stove has removable regulators. But it all depends on the care of the stove. If after each use you wipe your assistant with a damp sponge, then you are not afraid of strong pollution. Naturally, with such care for the stove, the regulators will not swim with fat and can be easily removed if necessary.

For example, removing regulators from Hephaestus, Hansa and Indesit gas stoves will not make it difficult for you.To do this, you just need to pull the regulator along with the circles towards you.

It will not be difficult for you to wash the regulators from pollution at home. To clean the handles at the stove, only at first glance it seems like a difficult and painstaking job. And if you know how to do it right, then it will generally turn into joy, and the stove will be completely clean, it’s cozy and comfortable.