Do-it-yourself washbasin for giving: an overview of the best designs and examples of homemade products

Varieties of country washbasins

There can be many design options for organizing a washing area - it all depends on the dimensions of the country estate / cottage, the available communications and the purpose of this plumbing fixture.

So, if the dacha is quite small and there is not even a house, as such, then it is quite possible to get by with a modest and simple option - a hinged mini-tank. Which, by the way, you can make yourself or buy a ready-made container at a hardware store at a more than affordable price.

If you need not only to rinse your hands and refresh your face, but also to wash the dishes after the household, then it is advisable to consider the option of a heated washbasin - to make it easier and more convenient to wash greasy dishes after pilaf or barbecue

If you have a well-equipped estate and you dream of making your own washbasin, which will be located in the open air, no less spectacular, then you will have to show imagination and set aside a day or two of free time.

According to the purpose, washbasins in the country can be divided into the following categories:

• for washing hands and face;
• for washing fruit/vegetables outdoors;
• for dish washing;
• for all of the above + a separate stylish addition to the interior.

If the purpose of a country washbasin is a quick washing of hands and face, and there is absolutely no time, then a simple washbasin with a stem would be appropriate here.

It is also easy to make from improvised materials. In fact, he looks completely unrepresentable.

If a washbasin is required not only for quick rinsing of hands after gardening, but also for washing dishes, then it is advisable to take care of hot water.

The latter will help to provide heating TEN, which will heat up the whole tank of water in a timely manner and supply it in the right amount.

If you approach the issue of creating a washbasin creatively, apply your imagination, starting from the decorative features of your dacha, you can create something original and unique.

Below are non-standard solutions to the problem of manufacturing a country washbasin. Which can be not only useful, but also incredibly stylish.

Also, you should immediately consider the mode of drainage - into a nearby ditch, right under your feet or into a sewer pipe. The latter option is possible if there are amenities in the country.

If we are talking about a tap “right under your feet”, then it will not be out of place to pour rubble so that small splashes do not fall on shoes and legs.

The following article will acquaint you with the ten market-leading options for country washbasins, in which the design options are analyzed and technical specifications are given.

5 ways to make a washbasin for a summer residence with your own hands

We have put together a few ideas and simple master classes with which you can easily make a washbasin for a summer residence with your own hands. In the article you will find 5 different options with step-by-step instructions, photos and videos. We will move from primitive designs (camping washstands) to more intricate ones. It does not take much time and materials to create any of these washbasins - everything is quite simple.

From a plastic bottle

Let's start with the simplest master class. This washstand is ideal during planting work in the country. Just 10-15 minutes of time - and you do not have to go into the house to wash your hands. Also, this option is good on a hike: a plastic bottle and water from the river - that's the express version of a homemade washbasin.

• 1.5 liter bottle;
• syringe or pin with a "hat";
• wire or other fastener.

The support for the bottle can be made from a thick wooden tin bracket. It can be replaced with plastic ties. In this case, you need to fix them with nails.

It is often advised to use a nail as a throughput pin. It is better to abandon this idea. It is easy for them to get hurt, and from contact with water, the metal will become rusty - this is fraught with unpleasant consequences. The inside of a syringe or a blunt end pin is ideal.

From a 5 liter canister

The principle of assembling a washbasin from a canister is the same as for a washstand with a 1.5-liter bottle. Only in this case a larger volume is obtained. In addition, you need to make a denser suspension, as well as take care of the filling funnel.

• drill and pin;
• knife and ½ plastic bottle 1.5 liters.

Cut off part of a small bottle. You want the one with the neck. Make a hole of the same diameter in the bottom of the 5-liter canister and insert the funnel into the washstand. It is better to hang the structure on twine or wire.

Make a hole in the stopper of the future washstand, insert the syringe from the inside. Cut off half. Attach with liquid nails. So a home-made country washbasin will not leak, and it will be possible to fill the canister completely.

From a plastic canister

To make a washbasin for a summer residence from an old plastic canister, you will need a metal or plastic faucet. You can't do without it. The rest of the principle is simple.

• tap;
• funnel bottle;
• fasteners (nails, belt, metal staples).

At the bottom of the canister, make a hole that matches the diameter of the base of the tap. It must be mounted as tightly as possible, since it will not work to fix the structure on the reverse side.

To fill the canister, use a funnel made from a 1.5 liter bottle. You can fix the country washbasin by any improvised means.

For soft canisters, plastic taps are perfect; for harder ones, it is better to choose a metal construction.

From a bucket

Most often, for washbasins in the country, they use old buckets that have already served their purpose. It makes sense. However, if you want to make a washstand not for one season, but a full-fledged washbasin that will hang in the country for years, it is better to take a new stainless steel.

• bucket;
• drill;
• screw crane;
• wooden board.

First you need to install a faucet. It is better to choose a screw version - it is more reliable. Position it as low as possible to the base so you don't have to constantly refill your water supply.

Screw the bucket to the wooden plank. It is advisable to do this in 2-3 places, and always in the upper part. The plank can be placed anywhere: on a pole, nailed to a tree or house.

Street car wash (video)

And this version of the washbasin is suitable for those who are ready to work hard to make a durable sink that will stand in the country for many years. Wooden construction and details are reliable, durable and look beautiful.

Watch this step-by-step video master class, in which the author talks in detail about how to make such a washbasin for a summer residence with your own hands. All sink drawings with dimensions are attached. The finished washbasin can be connected to the water supply and make an autonomous drain for it.

Choose the option that suits you: a simple washstand from a plastic bottle or a solid wooden sink for many years. We hope these ideas will help improve your cottage!

Washbasin on wheels made of slats and timber

A convenient, practical and beautiful washbasin for giving on a cabinet with wheels made of rails and timber, as in the photo below, you can do it yourself quite simply and in a short time.

For work you will need the following materials:

• wooden beam;
• rail;
• accessories for wheels - 4 pcs;
• sink;
• plastic canister with a tap.

All wooden parts fastened to self-tapping screws, and after the structure it is important to treat it with impregnation from moisture. The dimensions of the washbasin depend on the idea and parameters of the sink

Do like this:

1. Assemble 2 bases from a bar on self-tapping screws. One in the form of a square according to the size of the shell, the second, taking into account the stand of 2 short and 2 long bars. Lath them with a rail.
2. For 4 beams about 1 m high (you can choose the height for your height, so that it is convenient to wash your hands), wind the wheels with self-tapping screws.
3. Screw the legs to the blanks with the crate.
4. From above, assemble a stand for a water tank from a bar on self-tapping screws.
5. Hang the tank and install the sink.

Place a bucket or tank on the bottom grate to drain the water. As a container, you can use a ready-made garden washbasin tank or make your own from a bottle or canister (see descriptions below).

Rack Models

Washbasins on racks are containers with taps fixed on a frame. The frame has "legs" at the bottom that go into the ground. Thus, the washstand on the rack moves freely and is installed in any part of the infield. For ease of installation, a transverse crossbar is made above the support legs - this is a kind of “pedal”. You can quickly and reliably install the structure by pressing the crossbar with your foot.

The frame structure of the washbasin on the rack must be reliably protected from moisture, especially its supporting parts, which are immersed in the ground.

Plastic washstand for giving on the rack

A tank with a faucet can be purchased or made independently

Please note: the depth of immersion of the legs for reliable stability increases in proportion to the mass of the structure. This is an important factor when choosing the material of the tank and its volume.

An interesting version of the washbasin with a sink on the racks

Heated washbasin

Hot water in the country is one of the main signs of comfort. The design of such a washstand implies its connection to a 220 V electrical network.

For this reason, its permanent installation is required. The water in the tank is heated using a conventional boiler or a special heating element with a temperature controller is used.

The power of such an element (heater) must correspond to the volume of heated water. If the power is insufficient, the heating time will be out of range. If the power is excessive, the liquid will be overheated.

If the tank consists of one chamber, the water must be heated to about 40 degrees. In the presence of a two-chamber tank, that is, for cold and hot water, heating must be carried out to a higher temperature.

In the latter case, the tank is equipped with a water mixer.

How to make a country washbasin yourself?

All of the above washbasins (hand basins) do not meet your requirements or available budget? A great way to design and make your own handmade vanity washbasin.

The cheapest and easiest way to make a country washbasin: make holes (one or more can be) in a plastic bottle and hang it on a pole, tree or fence. You can cut off the bottom of the bottle and regulate the water supply with a lid, or you can attach a valve that doses the amount of water being drained.

To such a simple washbasin, you can equip an old sink, build in a cabinet, and also adapt a tank to collect water. Voila, done! Option two will require a lot of effort and creative research.

Choosing a place for a country washbasin

First you need to determine the place for the future washbasin

The choice of place depends on whether you live in the country for several days in a row or come for the evening, it is also important to take into account seasonal or permanent residence. You also need to think about wastewater disposal: collect water in a tank and take it out manually or build a small septic tank, which we will discuss later

The design of a self-assembled country washbasin

The place must be freely accessible. It would be better if you make a platform of crushed stone or water-permeable tiles in front of the washbasin, so that excessive dirt will not form.

The design of a self-assembled country washbasin

The material from which the sink is made should also be taken into account. Install the washbasin on the south side if you like warm water, or if you need to protect the basin from the sun, use natural shade.

The design of a self-assembled country washbasin

Determination of the design, purchase of materials or selection of improvised means

The place has been chosen, now we must select or buy the materials from which we will build our washbasin.Here the question is purely individual: a washbasin from a plastic bottle, which was mentioned above, is suitable for someone, or you need to purchase washbasin design elements suitable for this in a hardware store.

The design of a self-assembled country washbasin

So, you need: a water container, a connector (hose), a future “spout” (a device for dispensing or supplying water), a sink (plastic, metal or ceramic) any board or metal will do to make the body of the future washbasin.

The design of a self-assembled country washbasin

DIY Instructions

Let's start with the simplest.

From a plastic bottle

You can take any bottle, from one and a half liters to five liters. Punch a small hole in the side of the bottle cap and hang the container upside down. When screwed on, the hole in the lid is tightly closed, but if you unscrew it slightly, the jet will immediately pour out. The main problem is only in the adjustment so that the water pressure does not tear off the lid.

A slightly more complicated way is to build a stock from a syringe. We take a regular syringe and cut off the upper part where the needle is connected. We cut a round hole in the lid and thread it through a homemade stock. The pressure in the bottle will press the piston head firmly, and the pressure on the piston will force the water to flow.

From the canister

It's more convenient to use. You can take a plastic or metal canister and cut a hole for a faucet in its lower part. To make the connection airtight, provide the faucet with rubber gaskets on the outside and inside.

If your canister is large, then you should think about draining.To do this, a hole is punched in the bottom of the canister, and a corrugated pipe is connected leading to the drain point (drainage ditch)

On racks

This is the same washstand, but with supports. Supports can be created from anything - reinforcement, wood, plastic. There are purchased supports - as a rule, they come with a crossbar, with which they drive the legs into the soil. The main thing is to take care of resistance to moisture, especially the supporting part of the racks. The tank is mounted on supports, the legs of which must be dug into the ground to a depth directly proportional to the weight of the device. Capacity can be taken from 10 liters.

Expert opinion
Kulikov Vladimir Sergeevich

For particularly heavy structures, it is better to concrete the legs of the frame.

Built-in cabinet (moidodyr)

If you are not a fan of hastily made things, then you can try this option. It will make you sweat, but the result will reward you in full. To do this, you need a sink, tank, plywood, etc. If you are lucky enough to find a real wooden cabinet, plywood is not needed.

In general terms, “moidodyr” should be a structure where a sink will be built into the upper part of the cabinet, and a tank is fixed above it. It is recommended to treat the wooden surface with varnish or paint to protect it from moisture. "Moydodyr" is very convenient to use, it can be equipped with a mirror, soap dishes or a towel holder.

heated

What is the peculiarity of such a device? It will allow you to use hot water in the country - this is a rare happiness. Of course, a place for such a device must be chosen deliberately, since you can’t get far from a banal outlet.As a heating element, you can use both a conventional boiler (but this is a rather unsafe option), and a heating element with the possibility of thermoregulation.

Calculate the volume of the tank, the power of the heating element should be directly proportional, otherwise you will either wait a long time for heating, or vice versa, you will get boiling water

Pay special attention during installation to the insulation of the wire. If the tank is divided into sections, there should be a mixer instead of a tap. Tanks suitable for metal and plastic

Tanks fit metal and plastic.

For premises

Indoor wash basins

If we are talking about homemade washstands on the street, then it is definitely worth mentioning the washstands in the room. The internal washstand is much more complex in design than its outdoor counterparts. It is clear that here you need to take care not only of its functionality, but also of beauty. In other words, it should harmoniously fit into the general surroundings of a country simple life. Most likely, this will be the most common type of internal washbasins - “moidodyr”. How to make this washstand out of wood? We will need boards 25 × 150 mm.

In vertical blanks, recesses must be cut in advance (depth 20 mm, width 8 mm). This can be done with a manual router. In horizontal blanks, spikes are cut accordingly using a conventional hacksaw.

The size of the future washbasin is largely determined by the dimensions of the water tank that we plan to use for it.

It is also important for us to know for sure the dimensions of the sink, which we will mount on the cabinet.After everything is cut to size and technological recesses are cut along with spikes, the washbasin is assembled like a designer. However, it would be better to fix the joints with wood screws

However, it would be better to fix the joints with wood screws.

The upper (or side) part of the structure has a niche where we should insert the finished water tank.

Moidodyr assembly

We strengthen the bottom of the washstand with slats (20 × 45 mm) at the same distance from each other. We close the back wall of the upper part of the "moidodyr" with plywood - from 3 mm and fix it with self-tapping screws. Of course, it is better to use moisture-resistant plywood for such a thing in case the water container leaks, but if there is none, it’s not scary.

As for the cabinet door, everything is simple here: we glue a square of 3 mm plywood with PVA glue to the frame of four interconnected small wooden planks on its back side. It remains to embed a lock with a figured handle. Everything, the wooden frame of the “moidodyr” is assembled. Now the final touch is grinding, painting the product, and then installing the sink. It will turn out very cute.

Homemade washstand in the house

There are a lot of options for washbasins and they are all good in their own right. The question is which design you prefer. Much, of course, depends on the functions that you assign to it. One way or another, a washstand / washbasin is convenient in every way. And if it's in the country, even more so. Therefore, we hope that this article was useful for you.

Exploitation

So that when using a country moidodyr there are no problems, it is important to be guided by the following rules:

If the device will be located on the street, a canopy should be equipped above it.

It is also important to take care of the insulation of the wiring.
Since scale will form on the heating element of the moidodyr over time, buy a new anode annually and replace only it, and not the entire system.
Do not turn on the device in the network in the absence of water in the tank. Make sure that the water fills the container above the minimum mark.
It is easier to care for a stainless steel product, as you can use abrasive cleaners.

If your moidodyr is made of plastic, such funds should be discarded.
Avoid situations where the water inside the tank freezes. This threatens to damage the tank.

We use improvised means

Even if you still only have plans to create a moidodyr in the country, you still have to wash your hands and wash your face. In this case, the simplest, hiking option will come to our aid - a plastic bottle with a volume of 1.5 liters or more. Cut off the bottom, turn it over and fasten it on a wire to a tree branch, a fence, etc. Water is poured from above and warms up quite well. You can make a full-fledged washbasin by attaching holders for soap, toothpaste and brushes.

Scheme of a washbasin from a plastic bottle

So that the water from such a bottle does not flow constantly, but when necessary, several devices can be used.

1. The easiest way is a nail in a cork. Make a hole in the center of the bottle cap and insert a nail into it so that the cap remains inside. Screw the plug tightly. The disadvantages are that water leaks, and this causes the nail to rust, and besides, it is not very convenient to wash your hands with such an inconsistent water supply.
2. The second way is easier to use. A hole is made on the side of the lid.When the lid is unscrewed, the water starts to flow as much as you need. Screw on the lid and the water will stop. The disadvantage of this method is that it is not very easy to control a sufficient level of unscrewing so that the lid is not completely torn off.
3. The third way is also simple: you can attach a faucet, for example, from a washing machine, to the neck of the bottle with electrical tape. The water will flow the way you want it to, and you can be sure that the faucet won't break if it's well fixed.
4. The same faucet (or purchased from a hardware store) can be attached to a plastic container with a volume of 5 liters or more. To do this, just drill a hole of the desired diameter and fix the faucet in it. A tin or enameled bucket as a container is also perfect.

Such home-made washstands from improvised means can be decorated with various patterns. Children will be very happy to have the opportunity to apply their imagination and efforts for a common cause.

Successful examples and options

The placement of the washbasin in the country depends on the needs of the household. A simple design is installed in the garden, where a hinged tank is mounted on a frame. Curly annuals can be planted around the legs of the frame to decorate the supports. In the yard it is more convenient to use a cabinet with a sink. The advantages of a corner location are to create a hygiene zone hidden from prying eyes. If it is decorated with plants or paintings, this area will acquire a special charm. Advanced summer residents of cabinets with computers for adjusting the heater are placed in the country kitchen, bath or shower.

It is very convenient to purchase a washbasin model with a pump for pumping water using a foot pedal, where the tank is connected by a special hose to a common water tank intended for household needs. The pump allows you to contactlessly fill the wash tank with water, which will be a great advantage when working with the ground and for hygiene purposes.

Country craftsmen with imagination and imagination equip a corner for washing, creating stylish compositions from wood, stone and metal.

In the next video you will see how to make a do-it-yourself washstand for giving.

Do-it-yourself homemade products for summer cottages and gardens

In the country, there is usually some free time for creativity and arranging the surrounding space. Therefore, it is worth having a few fresh ideas on hand to implement them in your own summer cottage. Do-it-yourself country homemade products at home can be even ingeniously simple. From improvised materials, you can make unexpected and extremely useful household items.

Ordinary pebbles turn into fabulous animals. An old teapot makes a beautiful flower pot.

Used tires have already become a classic in the world of garden figures. Stylish lamps for a country interior - do it yourself from an ordinary jar and candles (do not forget about safety precautions). Hanging flower beds are a great idea for a small garden. Do-it-yourself homemade products for summer cottages and gardens often turn out by themselves, without unnecessary time and financial costs. Perhaps you had no idea how useful plastic bottles will be for the household. Plastic bottles that have gone out of use can serve as the basis for an incredible decorative flower bed. Cool "blooming" pillars will greatly decorate your summer cottage.

DIY garden furniture successful homemade: photos and drawings

In the previous sections, we told you about homemade products that will become indispensable for the economy and household. However, do not forget about the rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks - all this country-garden bliss can settle on your site. We suggest that you familiarize yourself with the photo instructions and drawings for the manufacture of garden furniture. We have selected the best options for you.

DIY homemade tractors at home: video

Another car on the farm will never be superfluous. With the help of video tutorials, you will learn how to design homemade tractors for processing a garden and a summer cottage without any extra effort.

Video: do-it-yourself homemade products at home

New and simple crafts for home improvement, garden and vegetable garden are waiting for you in this section. We will tell you completely free of charge how to make useful and beautiful things with your own hands.

DIY fishing crafts: video for you

Every fisherman likes to brag about a good catch. And in order to match your fishing plans to your abilities, listen to the advice of professionals and experienced amateur anglers.

DIY car crafts: video recommendations

For many men, the car is a full member of the family. What can we say about when you created this brainchild with your own hands.

With cabinet

Next, consider the option with a pedestal, popularly called "moydodyr".It is the most convenient to use and place. This design can be installed both on the terrace, and inside the house, and on the street. For the construction of such a washstand, you can use the remains of building materials and any improvised devices.

The sink acts as the main element, an old unnecessary sink can serve as its role. It is due to this element that it is convenient to carry out hygiene procedures, wash food and dirty dishes in the “moidodyr”.

The frame of such a washbasin is usually sheathed with panels, plywood, boards or sheets. So that wooden elements do not collapse, they must be varnished. Additionally, you can place next to such a design dish dryermade by hand. You can collect it from the boards, also further covering them with varnish.

To drain the water, everyone chooses the best option for themselves. The simplest is a bucket to collect used water. Also, you can make the bottom of the cabinet from the boards, between which there are small distances of the order of 1 cm. So the used water can seep into the ground and provide air circulation.

Wooden "moydodyr" on their own

For the manufacture of a more complex stationary structure, which will be not only a functional, but also a decorative element of the site, you will need boards 25x150 mm. The dimensions of the structure depend on the dimensions of the water tank and the preferences of the owners.

In vertical blanks, eyelets are made for arranging spikes. To do this, using a milling cutter, grooves are cut with a depth of 20 mm and a width of 8 mm. At the ends of the horizontal blanks, spikes are cut out using a circular saw.

All washbasin blanks are assembled into a one-piece structure and connected using self-tapping screws.

On the inner sides of the lower part of the structure, a base is prepared where plywood sheets will be installed. Sheets can be put on glue, or fixed with small nails.

A tank is placed between the side walls of the upper part of the structure. The floor of the washbasin is laid out from slats 20x45 mm. The walls of the upper part are fixed with self-tapping screws, so that if the tank leaks, it can always be removed. The principle of manufacturing the door of the structure is quite simple: a sheet of plywood is glued to the frame, the planks of which are interconnected with a tongue-and-groove. A lock with a handle is installed on the door frame.

The washbasin is ready. It remains only to carefully sand the product, paint, and then install the sink

Style and design

Concrete is considered a rough material, but with the right approach, it can turn any structure into a real work of art. Trusting your imagination in interior design, you can effectively apply this material.

Consider several options for using concrete sinks in different interiors.

A polished concrete sink combined with a wooden countertop looks very stylish. This option is ideal for an interior decorated in a loft style.

Concrete structures harmoniously fit into a variety of stylistic directions.

• Concrete sinks and vanities are very common in modern bathrooms and kitchens. Most often we are talking about integrated versions of the classic or original form. A concrete sink is the perfect option for a minimalist interior.
• Concrete is one of the main materials used in the loft style.
• Unusual shapes of concrete sinks are the main criteria for high-tech bathrooms. Such an interior is characterized by a minimum of used shades, an abundance of lighting, a simple geometry of shapes and lines.

Varieties of outdoor washbasins

Outdoor washing can be designed in various variations. You can create and install washbasins that, if desired, can be easily transferred to another, more convenient place. There are also such washbasins, which are intended only for a certain place.

The most common option for street washing is considered to be a hanging washbasin. It can be built in minutes from improvised materials.

The simplest washbasin options can be created even from 1.5-liter bottles. However, such products are considered only as temporary, designed for a couple of days of use.

For a hanging washstand, a container with a volume of at least 3-5 liters is suitable. Such a washstand is designed to be used only for washing hands, since such an amount of water will obviously not be enough to wash dishes.

If a sink is also being built for washing dishes, then a container with a volume of about 20 liters is taken. A water supply mechanism is attached to the containers: a tap, a plug.

You can also create an outdoor washbasin on a counter by attaching the container to it. Many designers often use a countertop washbasin as a decorative element. The structure, made of wood and varnished, looks very beautiful. No less attractive is the washbasin on the counter, made of natural or decorative stone.

The washbasin, created on the basis of two barrels, looks very interesting.The first high barrel acts as a pedestal, on which a sink is fixed and a bucket or drain hoses are hidden inside.

And the second small barrel is suspended vertically on a wall or rack. In the photo you can see how beautiful and impressive the design looks. A crane is inserted into this barrel, and after that the structure can be used immediately.

There are a lot of ways to make a simple car wash on the street in the country. Improvised means are suitable as a temporary solution. And for a permanent structure, it is necessary to provide a reliable foundation and connection to the sewer system.

What designs of washbasins exist?

There are several types of washbasins: with and without cabinets, hanging containers and designs on racks.

The simplest model of a washbasin is a three to four liter container made of plastic or aluminum, with a lid and a pressure spout.

The back wall of the washbasin in the picture above is equipped with a special fastener, for which you can hang the container on a nail driven into a wooden vertical rack. Water is poured into the tank, covered with a lid and a bucket is placed under it to collect the used water. Water is added to it as it is used. The top wall of the washbasin lid has a slightly concave corrugated surface, thanks to which it can be used as a soap dish.

Wall-hung washbasins with a pressure tap equipped with a magnet that fixes it in the raised state are a more advanced version of the simplest model.

Some models are equipped with a valve valve, thanks to which it is also convenient to regulate the flow of water.A rectangular fifteen-liter plastic container is installed on a cabinet with a sink, under which a bucket is placed to collect water.

Often you can find on sale and washbasins on the counter. Portable wash basins with legs can be placed anywhere on the site

Due to the presence of special horns on the racks of the structure, the washbasin is firmly installed on the ground in the garden or vegetable garden, deepening it a little.

The “moidodyr” washbasin is convenient, first of all, because the design sink can be used as a container for washing fruits, vegetables, and dishes. Some models have hooks for towels, shelves for soap accessories and even small mirrors. Washbasins made of plastic or metal are designed for outdoor installation. Wooden washbasins equipped with a water heating system are more suitable for indoor installation.

Washbasins with a cabinet are stationary structures, the main elements of which are: a cistern, a sink and a pedestal-rack

Conclusions and useful video on the topic

Photo ideas of useful homemade products for summer cottages:

Original ideas for using old doors in the country:

To decorate your summer cottage, there is always a choice: use improvised materials and do something non-standard, or use ready-made store offers.

Homemade inventions can bring something new to your site, demonstrating your idea of ​​\u200b\u200bbeauty in a summer cottage. Many summer residents are creatives who are always in trend and set the latest trends in country fashion and landscape design themselves.

Do you have interesting ideas for decorating a summer cottage? Or do you want to consult with other site visitors about the advisability of making a certain thing? Ask your questions - the feedback block is located below. Also here you can share your ideas of useful homemade products, add original photos of things and objects made by yourself.